Tamil Nadu Generation And Distribution Corporation Limited Tender

Dismantling the existing Brick work in Cement Mortar and clearing away the dismantled materials upto 5KM from the site including cost of labour, transportation,loading, unloading, lead, lift, T&P etc. complete.

Earth work excavation by engaging JCB including Labour charges etc.

Chipping the wornout plastering in walls, ceiling etc, including clearing the debris away from the site.

Dismantling the existing damaged pressed tiles and laying one course of new pressed tiles of size 23 x 23 x 2cm Embeded in CM 1:3 12mm thick & pointed with same mortor with the required slope and beaten with wooden beaters including cost of all materials, curing, labour lead lifts etc., complete.

Sand filling including cost of all materials, lead, lift labour etc. complete.

Filling course rubble including cost of materials,lead,lift, labour charges etc complete

Filling 40 mm metal over course rubble stone to form a uniform level, including cost of stone, transport filling charges Labour, lead,lift etc. complete.

PCC 1:4:8 using 40 mm HBS machine crushed metal for flooring including cost of all labour, materials, lead, lift, curing etc., complete.

Brick work in CM 1:5 using II class bricks of size 9" x 4 3/8" x 2 3/4 " including cost of all material, labour, lead, lift, curing etc complete.

Fixing the existing cuddapah slab in the record room including labour charges etc.complete.

Plastering with cm 1:5, 20mm thick for wall and ceiling including cost of all materials labour lead lift etc. complete.

Providing false ceiling by using 10 mm thick perforated gypsum board in panels using 6mm GI ord suspender ,GI coated 'T' and 'L' including all materials, labour,lead,lift etc.,complete.

Repairing the old windows including the cost of labour etc. complete.

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.6x 44.45 x2.10 mm @1.608Kg/M and door inner frame side and vertical 53.70x44.45x2.30mm @ 1.238 Kg/m, door bottom section 83.50 x44.45x2.40mm @ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45 x2.17mm @ 1.072Kg/m glazing clips of 17.30x19.0x0.60mm @ 0.083 Kg /m, rubber beedings, hinges, handle, automatic door closer etc, and with 12mm tk. Two side laminated MDF board at bottom half portion and top half portion and top half portion with 5.50mm tk sun cool glass including cost of all materials, lead,lift, etc, complete single leaf door.

Manufacturing,Supplying and fixing single leaf steel doors using 18 guage M.S sheet and M.S Angle of size 40x40x6mm (outer frames) and 35x35x5mm (Inner frame) MS flat of size 25x5mm including cost of all materials, lead, lift etc., complete.

Flooring with approved Double charged Vitrified tiles 600x600x8mm over cement mortar 1:3,12mm thick , pointing with white cement mixed with colour pigmentsfinishing the joints, flush pointing the surface including cost of all materials labour lead lifts etc., complete.

Supply and fixing of non slippery floor tiles of 305 x 305 x 6 mm first quality design ceramic tiles of approved colours in CM 1:3, 10 mm thick including pointing with white cement 0.40 Kg / Sqm including cost of materials, labours, lead, lift, etc. complete.

Wall tiles with approved first quality & colour ceramic tiles with 300 mm x 600 mm x 10 mm laid in cement mortar 1:2, 10 mm thick including pointing with white cement using 0.4 kg / m² including finishing the joint and pointing flush with the surface including cost of all materials, labour, lead, lift, etc. complete.

Dismantling the old WC and Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections,15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and fixing of new Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron brackets, 32 mm dia c.p. waste coupling, rubber plug and chain, 32mm dia 'B' class GI waste pipe, 15 mm dia G.M. wheel valve, 15mm dia nylon connection, 15 mm dia brass nipples, 15 mm C.P. pillar tap etc. including cost of all materials lead, lift, labour charges all specials transporting charges etc., complete.

Providing solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick soild PVC sheets. Shutter using 5 mm thick soild PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50 mm x30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x30 mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and providing 32 mm PVC super thick pipe (10 kg/cm2pressure) of approved quality with necessary PVC specials including cost of all materials, lead, lift etc. complete.

Supplying & fixing in position of brass chromium plated water tap with approved ISI make including cost of all materials lead, lift, labour charges all specials transporting charges etc., complete.

Supplying and fixing of mirror of size 600 x 450mm mirror including cost of all materials, lead, lift etc. complete.

Supplying, laying, jointing of 75 mm dia PVC pipes and specials for water line of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supplying, laying, jointing of 110 mm dia PVC pipes and specials for rain water drain pipe line of pressure 4.00Kg/cm2 of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supplying, laying, jointing of 110 mm dia PVC pipes and specials for sewer lines of pressure 6.00Kg/cm2 of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supply of ISI mark Galvanum steel sheet for sunshade (powder coated sheet)of 0.47 mm thick including transporting , all lead ,lift etc.,complete.

Supply of sunshade supporting materials such as M.S angle, M.S.Square tube, flats, etc., including Primer and enamel Painting ,transporting charges,lead ,lift etc., complete.

Supplying and fabricating MS Angle of size 65x65x6mm for ladder from ground floor to the roof top including cost of all materials, lead, transport, welding etc. complete.

Providing two legged scaffolding one side of buildings to secure the applicators working on top using 13-15 cm dia casurina prosps and planks including cost of all materials labour lead lift transport etc. complete.

Enamel painting two coat wih ISI approved quality paint for old iron work including cost of all materials, labour, brush, all leads & lifts etc.,complete.

Enamel painting two coat wih ISI approved quality paint for new iron work including cost of all materials, labour, brush, all leads & lifts etc.,complete.

Enamel painting two coats wih ISI approved quality paint for old Wood work including cost of all materials, labour, brush, all leads & lifts etc.,complete.

Colour washing Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer.