Tamil Nadu Generation And Distribution Corporation Limited Tender

Laying cool roof/white roofing tiles of size 300X300X10mm in CM 1:3-20mm thick mixed with conplast X 4211C @200ml per bag of cement over the roof surface after dismantling the pressed tile with proper slope including the cost of all materials, labour, lead, lift, T&P, transportation etc, complete

Replacement of damaged doors with new Doors flush type (Single leaf) with Factory made shutters using 30mm Medium Density Fibre Board as per IS:3087/1985 with E-type T.W.beading bonded with Water resisting adhesive fixed to country wood frame of size 100X65mm and fully thread GI screws and as per IS 1003/1977 and with the following fixtures such as iron butt hinges, SS tower, Mortice lock with night latch for doors, and painting with two coats of approved enamel paint over a coat of primer including cost of all materials, labour, lead, lift, etc, complete

Replacement of damaged M.S windows with Now UPVC windows specification, supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mmX58m and shutter profile are reinforcement with GI/1mm 12GSM and 100% corrosion free the profiles are multy chambered sections with well thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The comers and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protection hinges, strong locking system and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The windows should be fixed to the wall with 100% packing with screws and slicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Flooring with ceramic tiles of approved make, colour, quality and 305X305X6mm thick over CM 1:3, 20mm thick and pointed with the same coloured cement for bath and toilet including cost of all materials, labour, lead, lift etc, complete

Colour washing two coats with interior and exterior emulsion over old surface after through scrapping in inside & outer walls etc, including cost of all materials, labour, scaffolding, brush, lead, lift etc, complete