Tamil Nadu Generation And Distribution Corporation Limited Tender

Providing P.C.C 1:2:4 using 20mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, laed, lift, etc., complete.

Filling the basement upto floor level using gravel well watered and consolidated in foundation and basement in layers complying with standard specification and as directed by the Engineer in charge including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete.

Brick work in CM 1:4 using Fly ash Bricks of size 23x11x7cm for basement and super structure as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete.

Plastering in CM 1:3, 20mm thick for all ceiling surfaces, Sunshades, etc., as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Plastering in CM 1:5, 12mm thick for all ceiling surfaces, Sunshades, etc., as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator)as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch withpainting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade insuitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wireconnection of 14 SWG TC wire for open PVC power plug point as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing of two pole MCB 63A supply suitable for Both Lighting and motar circutits of approved quality Legrand/hager/Equilant including Sheet steel Enclosure for MCB's cost of all materials as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing of double pole MCB 32A suitable for Both Lighting and motar circutits of approved quality Legrand/hager/Equilant including Sheet steel Enclosure for MCB's as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete..

Supply and fixing of 20W 4 feet LED fitting with LED of Philips / equivalent make on wall / ceiling as directed by the Engineer incharge at site including cost of all materials, lead, lift, T&P, etc., complete.

Labour charges for fixing of MS round pipe suitable for supporting the metal roofing sheet for weighing scale shed( Necessary pipes will be supplied by the department) as directed by the Engineer in charge including cost of all materials, lead, lift, etc., complete.

Supply and fixing of MS pipe suitable for supporting the metal roofing sheet for weighing scale shed as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, lead, lift, etc., complete.

Supplying and fixing of metal roofing sheet 0.47mm tk over MS structural section with necessary screws as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, lead, lift, etc., complete.

Chipping, Clearing and removing the existing flooringwall Tiles andPaving the floor with best quality Vertified Tiles of size 305 x 305 x 6mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Supplying and fixing white glazed earthen ware Indian Water Closet- 580mm x 440mm with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Supplying & fixing in position of European colour water closet with p or s trap withdouble flapped seat andseat cover with brass hinges and 10 litre capacity pvc low level flushing tank with all internal fittings & accessories as directed by the Engineer in charge including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&Ps, etc., complete.

Supplying and fixing of colour Hand wash basin of size 550x400mm of approved make without pedestal with one pair of cast iron brackets, one No. 15mm dia brass CP pillar tap, one No. 32mm dia "B" class GI waste pipe with rubber plug and chain, One No. 15mm dia GM wheel valve, one No. 15mm brass nipples, one No. 15mm dia nylone connection, one No. 32mm dia CP brass waste coupling, one No Fibre Glass framed Mirror 600x450 x5.5mm tk, 1 no 20mm dia aluminium anodised towel rail of 600mm long, one No brass CP soap tray of size 150 x 100mm as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing lipped mouth porcelin Flat Back Urinal with all accessories such as 32mm dia Bell mouth PVC connection , 15mm dia G.M. wheel value, 15mm dia B Class G.I. waste water pipe, 15mm dia nylon connection, 15 mm dia brass nipple etc., with all accessories as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., with following fixtures like i) Hold fasts of size 35x35x5mm, length 300mm-4Nos,ii) Powder coatd Aluminium Aldrop 250mm long-1No.,iii)Anodised Aluminium Handle 200mm long-2 Nos(Front & Back side),vi) Anodised Aluminium towerbolts 250x12mm-2Nos,v) Oxidised iron Butt hinges (100x30mm)-4Nos,vii) Rubber Bush-1No,including cost of transporting, lifting and fixing ,embedding the hold fasts in walls rigidly with concrete PCC 1:2:4, cost of all materials,as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete..

Painting two coats over plastered wall surface with ready mixed plastic emulsion paint of first quality and of approved colour over a priming coat as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing of 15mm dia brass CP coated bib cock of long bady / short bady (Heavy Duty) (Parryware / Plato or its equivalent) with CP cup and Inner running Nipple of ISI make as directed by the Engineer incharge at site including cost of all materials, labour charges for fixing, lead, lift, T&P, etc., complete.

Supplying and laying of 40 mm dia PVC pipe (10Kg/M2) of approved make and quality with ISI monogram for water supply line from the existing OHT to water tank as directed by the Engineer incharge at site including cost of all materials, all specials such as Tees, Elbows, shoes, special clamps, bends, screws, etc., making holes in masonry / concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage,as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing of 32 mm dia PVC pipe (10Kg/M2) of approved make and quality with ISI monogram for water supply line from water tank to tap delivery line as directed by the Engineer incharge at site including cost of all materials, all specials such as Tees, Elbows, shoes, special clamps, bends, screws, etc., making holes in masonry / concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and laying of 110mm dia PVC Pipe (4kg/cm2) of approved make and quality with ISI monogram as directed by the Engineer incharge at site including cost of all materials all specials such as Tees, Elbow, shoes, Special clamps, bends, screws, gratings, etc., making holes in masonry / concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, labour, scaffolding, lead, lift, T&P, etc., complete.

Supplying and fixing of 40 mm Gun Metal Gate valve of ISI make (Heavy duty) as approved by the Engineer incharge at site including cost of all materials, labour charges for fixing, lead, lift, T&P, etc., complete.

Casting and fixing R.C.C. Precast slab of the 50mm thickness using 20mm size machine crushed hard granite stone jelly in cement concrete 1:1.5:3 including cost of reinforcement, moulding, curing, finishing fixing in position etc.,complete complying with standard specifications as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Providing Steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

Supplying and fixing of 500 liters tripple layer PVC water tank (inner white coated) of approved quality with ISI mark as directed by the Engineer incharge at site including cost of all materials, labour for connection, lead, lift, etc., complete.

Supplying and fixing of Aluminium Turbo ventilator 0.60m dia base sheet (1.83x1.22m) over MS structural section both side slope with necessary screws,as directed by the Engineer incharge at site including all materials, lead, lift, transporting, labour charges, T&P, etc., complete.

G.S.T. @18% should be Entered by the Bidder