Tamil Nadu Generation And Distribution Corporation Limited Tender

Dismantling the existing damaged pressed tiles and Providing surkhi concrete with broken brick jelly of 20mm size in pure slaked lime and laying one course of new pressed tiles of size 23 x 23 x 2cm Embeded in CM 1:3 12mm thick & pointed with same mortor with the required slope and beaten with wooden beaters including cost of all materials, curing, labour lead lifts etc., complete.

Dismantling the old damaged sunshade Complete complying with standard specification and Complete as directed by the Engineer-incharge.

Dismantling the existing Water closet and Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Earth work excavation in hard stiff clay, stiff black cotton, hard red earth,shales ,murram gravel ,stoney earth and earth mixed with small size boulders with initial lead of 10 m and lift of 2 m.

Sand filling including cost of all materials, lead, lift labour etc. complete.

Providing PCC 1:4:8 using 40 mm HBS machine crushed metal for flooring including cost of all materials, lead, lift labour etc. complete.

Brick work in CM 1:5 using II class bricks of size 9" x 4 3/8" x 2 3/4 " including cost of all material, labour, lead, lift, curing etc complete.

Pointing the RR masonary outer portion in cm 1:3, in full depth including cost of all materials, labour, lead, lift etc. complete.

Dismantling the wooden window and door including labour charges etc complete.

Supply and fixing of non slippery floor tiles of 305 x 305 x 6 mm first quality design ceramic tiles of approved colours in CM 1:3, 10 mm thick including pointing with white cement 0.40 Kg / Sqm including cost of materials, labours, lead, lift, etc. complete.

Wall tiles with approved first quality & colour ceramic tiles with 300 mm x 600 mm x 10 mm laid in cement mortar 1:2, 10 mm thick including pointing with white cement using 0.4 kg / m² including finishing the joint and pointing flush with the surface including cost of all materials, labour, lead, lift, etc. complete.

Manufacturing,Supplying and fixing double leaf steel window using 18 guage M.S sheet and M.S Angle of size 33x25x3mm (outer frames) MS flat of size 18 x5mm including cost of all materials, lead, lift etc., complete.

Manufacturing,Supplying and fixing single leaf steel doors using 18 guage M.S sheet and M.S Angle of size 40x40x6mm (outer frames) and 35x35x5mm (Inner frame) MS flat of size 25x5mm including cost of all materials, lead, lift etc., complete.

Supply of ISI mark Galvanum steel Colour sheet for sunshade (powder coated sheet)of 0.47 mm thick including transporting , all lead ,lift etc.,complete.

Supply of sunshade supporting materials such as M.S angle, M.S.Square tube, flats, etc., including Primer and enamel Painting ,transporting charges,lead ,lift etc., complete.

Supplying, laying, jointing of 110 mm dia PVC pipes and specials for rain water drain pipe line of pressure 4.00Kg/cm2 of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supplying, laying, jointing of 110 mm dia PVC pipes and specials for sewer line of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supplying, laying, jointing of 32 mm dia PVC pipes and specials for water line of approved quality including cost of all materials labour charges, all leads and lifts etc., complete.

Supplying & fixing in position of brass chromium plated water tap with approved ISI make including cost of all materials lead, lift, labour charges all specials transporting charges etc., complete.

Supplying and fixing 5.5 mm thk glass for window including cost of materials, labour charges lead,lift etc.complete.

Plastering with cm 1;3 20mm thick mixed with brush bond and conplast X 421 I C @ 150 ml/bag of cement for ceiling , including cost of all materials labour lead lift etc. complete.

Providing solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick soild PVC sheets. Shutter using 5 mm thick soild PVC sheets for panellingshall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50 mm x30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x30 mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fabricating MS Angle of size 65x65x6mm for ladder from ground floor to the roof top including cost of all materials, lead, transport, welding etc. complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (Lower end)

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated S.C. unsheathed cu. conductor cable of 1100V grade in suitable PVC rigid pipe on wall & ceiling with PVC accessories with 150x100x113mm TW switch box in flush with wall with 3mm thk. hylem sheet cover for 5A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supplying & fixing 20 W 4 feet Led light with fitting with block on wall or ceiling with PVC unsheathed leads from terminals to the fittings with 1 No. tube etc. complete.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Providing two legged scaffolding one side of buildings to secure the applicators working on top using 13-15 cm dia casurina prosps and planks including cost of all materials labour lead lift transport etc. complete.

Enamel painting two coat wih ISI approved quality paint for old wood work including cost of all materials, labour, brush, all leads & lifts etc.,complete.

Enamel painting two coat wih ISI approved quality paint for new iron work including cost of all materials, labour, brush, all leads & lifts etc.,complete.

Colour washing with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer.