Tamil Nadu Generation And Distribution Corporation Limited Tender

Supplying and filling the basement and foundation, with M.Sand, watering ,consolidation ,etc.,as instructed by the Engineer incharge. including cost of material, labour, lead, lift etc., complete

PCC 1:4:8 using 40m HB stone for foundation, flooring, etc.,in the following levels as instructed by the Engineer incharge including cost of all materials labour, lead lift , etc., complete.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for foundation,columns,etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

RCC M20 using 12-20mm HBG stone using minimum cement content of 360 KG for Grade beam and Plinth beam with form work for foundation including cost of all materials labour ,lead, lift etc complete but excluding cost of steel reinforcement-1m3.

Brick works in Cement mortar 1 : 5 using Country bricks sizeCountry Bricks (9"x41/2"x3") including cost of all materials, labour lead, lift, etc., complete.

Damp proof course with CM 1:3, 20mm thick at basement levelusing water proof compoundas as instructed by the Engineer in charge including cost of all materials lead lift etc., complete.

Providing Anti termite pre construction treatment using emulsifiable concentrate of required percentage as suggested by the manufacture and specification as per 6313 part II -1971 around plinth , foundation and basement as insructed by the Engineer in charge including cost of all materials,labour, lead,lift etc complete.

Brick works in Cement mortar 1 : 5 using Country bricks sizeCountry Bricks (9"x41/2"x3") including cost of all materials, labour lead, lift, etc., complete.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for columns above basement,etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for lintel and sunshade etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for Beams etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

RCC M20 (1:1.5:3)using 12-20mm HBG stone with form work for Roof slab etc., in the following levels as instructed by the Engineer incharge including cost of all materials, labour ,lead,lift etc complete but excluding cost of steel reinforcement.

Providing steel reinforcements for RCC works including cost of steel, binding wire and labour for cutting bending tying and placing in position etc., complete.

Supplying and providing steel grill for windows using M.S. angles 20*20*5 mm for window frame with 12mm square rod (MS) including cost of all materials painting with

Excavation and removal of earth inside the basement and spreding in layers 100m away as directed by the Engineer incharge of the work

Providing flooring with polished cudappa slab of 20 mm thick for steps as per standard specification and drawing including cost of all materials cutting, fixing, polishing and laying charges, lead,lift and curing etc complete.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as cast iron brackets , 32 mm dia C.P. waste coupling, rubber plug and chain, 32 mm dia “ B “ class G.I. waste pipe, 15 mm dia G.M. wheel valve , 15 mm dia nylon connection, 15 mm dia brass nipples, 15 mm C.P. pillar tap etc., including cost of all materials, labour lead, lift, etc., complete.

Supply & fixing of 25 mm GM wheel valve including cost of all materials, all labour, lead, lift etc., complete.

Supplying and fixing of laying of 32mm dia PVC pipe 10 Kg/cm2 for water supply arrangement including cost of all materials etc

Supplying and fixing of laying of 25mm dia PVC pipe 10 Kg/cm2 for water supply arrangement including cost of all materials etc

Supply and fixing in position of 12mm CP Bibcock of approved make including labour etc., complete.

Plastering with C.M 1:3 10mm thick including cost of cement all materials labour etc., complete

Plastering with C.M 1:5 12mm thick including cost of cement all materials labour etc., complete

Supplying and fixing of joint free first quality vitrified tiles of size 600mm x 600mm x 86mm in CM 1:3 of approved quality and colour including cost of all materials, lead, lift etc complete,

Supply and fixing of non slippery ceramic tiles of size 305mm x 305 mm x 6mm for flooring and finished to slope and hatched etc., complete as directed by the Engineer in charge

Providing dadooing the inside of tiolet walls with glazed tiles 300*200 to a height of 1.5m over cm 1:2 10mm thick and joints shallbe finished with white cement including cost of all materials lead, lift etc., complete

Supplying and fixing of PVC door for toilet with frame of approved quality and make with fitting with all materials lead lift, etc complete as per standard specification.

supplying and fixing new European water closet with "P" or "S" trap with Double falpped seat and seat cover with Brass hinges and 12.5litre capacity porcelin low level flushing tank with all internal fittings including labour lead and lift as directed by the engineer incharge etc., complete

Supply and fixing 610x400m plain edged mirror and approved make with cardboard backing with chromium plated detached head screw plugs etc., complete.

Supply and laying 110mm dia 6Kg PVC pipes jointing, testing etc., complete, including cost of all materials, labour earth work excavation and sand filling etc., complete.(Sewer Line)

Supply and laying 50 mm dia 6Kg PVC pipes jointing, testing etc., complete, including cost of all materials, labour earth work excavation and sand filling etc., complete.(Sewer Line)

White washing Two coats with white cement including cost of all materials, labour, lead, lift etc complete

Painting the outside wall with two coats of best quality exterior emulsion of approved colour over a interior primer coat of all materials, etc., complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Windows of casement type (open) from the profile the sizeof outer frame 60mm x 58mm and shutter profile arereinforcement with GI/1mm 125GSM and 100% corrosionfree, the profiles are multi chambered sections with wall thickof 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also itoperates as handle. The corners and joints should be weldedand cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the site Engineer before use on work"

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided inthe louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the site Engineer before use on work"

Providing and fixing anodized aluminium partition 1.32m height partly glazed (0.30m) and partly panaled (0.90m) with 12mm thick both side prelaminated boarde ( Novapan or equivalent) and 5mm thick plain glass (Modi, Saint Gobin or equivalent) using aluminium box section 63x38.4x2mmx 1.17kg/m approximate at 955mm c/c for verticals and horizontals (3Nos) with alu. clip of size 17.15 x 17.27 x 0.178kg/m including the cost of all materials, labour, lead, lift, transporting etc., complete and as directed by the engineer incharge.

Supplying and fixing in position aluminium partition partly glazed &partly paneled with 12mm thick both side pre-laminated board using aluminium box section 63x38.4x 2mmfor verticals @ 995mm c/c and horizantals @ 1m c/c. including the cost of all materials, labour, lead, lift, transporting etc., complete and as directed by the engineer incharge.

Hydraulic Door closer of various sizes of approved quality using Aluminium Extruded section body tubular type universal hydraulic door closer with double speed adjustment like HARDWYN (make) 'GAZEL' (or) equivalent (with ISI Monogram)

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC light point.(As per PWD Electrical Data SD25)

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC fan point.(As per PWD Electrical Data SD25)

Wiring with 2x1.5 sq mm (22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW Switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug wire with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.( As per page No. 21 SD 38 of PWD Electrical Data Book.)

Wiring with 2x4 Sqmm PVC unsheathe copper multistrand cable 1100Vgrade in suitable PVC rigid conduit pipes with 15A non-interlocking 3 pin wall socket plug only in TW switch box covered with hylum sheet accessories, TW box covered with hylum sheet and continuous earth connection with 14 swg wire for 15A plug point (SD.38)

Supplying and Fixing of Single box type 4’ 20W flu. LED Fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting.( As per page No. 38 SD 88 of PWD Electrical Data Book.) SOR-15-b-P-114

Supply and fixing of WT bulk head fitting with guard suitable for 11 W CFL lamp with CFL(As per page No.36 Sd 83 of PWD Electrical data Book)

Supply and fixing of 1400mm sweep AC ceiling fan of Crompton Greaves or Usha or Kaitan make with 300W electronic stepped regulator, fan clamp, extra down rod if any etc., complete.(SD.108)

Supplying & fixing of PVC water tank of 1000 litres capacity of reputed make as per the instructon of Engineer-in-charge including cost of tank, transport and fixing charges etc., complete.