Tamil Nadu Agricultural University Tender

REINFORCED CEMENT CONCRETE 1:2:4 (One cement two M.sand and four aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, strutting, cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., Complete complying with standard specification and as directed by the departmental officers.

For foundation and basement

For superstructure in Ground floor

For superstructure in first floor

REINFORCED CEMENT CONCRETE 1:11/2:3 (One cement one and half M.sand and three aggregate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams etc., Complete complying with standard specification and as directed by the departmental officers.

For foundation and basement

For Ground floor

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC Column footing, Plinth beam and sill beams, RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over countrywood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the departmental officers.

Plinth Beam

Column & Sunshade

Roof Slab,Beam & Lintel

Supplying, fabricating and placing in position mild steel / ribbed tor steel rods for all RCC works including cutting, bending to required shape and placing in position, cost of steel and binding wire and all labour charges, conveyance etc. in all floors. Complete complying with standard specfication and as directed by the departmental officers..

BRICK WORK in cement mortar 1:5 (One cement and Five M.sand) using second class chamber burnt bricks of size 23x11x7cm size 9" x 43/8" x 23/4" for the including curing etc., complete complying with standard specification and as directed by the departmental officers. (Masonry projections whereever necessary for obtaining required elevation shall be done without extra cost.)

For Foundation and Basement

For superstructure in Ground floor

For superstructure in first floor

Providing of pre construction Anti termite treatment in foundation, back fill treatment , Top surface of plinth filling, treatment along the perimeter of the building, under and all round of column pits, pile caps, wall trenches, and basement excavation, over top of plinth filling at the junction of wall and floors, at expansion joints and junction of wall and floors, at expansion joints and surroundings of pipes, and conduits etc., Complete as directed by the departmental officers with a guarantee of ten years.

Supplying and filling of Gravel in layers of not more than 15 cm thick, well watered, rammed and consolidated etc., Complete complying with standard specification and as directed by the departmental officers

Supplying and fixing of steel ROLLING SHUTTERS with ISI Monogram as per ISI specifications made out of 18 gauge x 75mm lath sections including fixing with curtain book plate guide channels, rollers and hook cover. The curtain shall be of 18Guage x 75mm lath sections cut to required size and fixing with heavy C.I. / M.S. clips. The lock plate shall be of 18Guage M.S.sheet reinforced with 40 x 40 x 6 mm M.S. Angles at the bottom and fixed with heavy latches and locking arrangements on either side with one handle on either side. The pressed guide channels shall be of 10G M.S. sheet attached to the side brackets with 20mm square brackets shall be of 10G.M.S. plates and C.I.'U' clamps shall be reverted to the side bracket. The roller shall be a heavy C.I. pulley fitted with heavy duty 'c' class steel 40mm pipe and two numbers of high tensile carbon coil springs. The hood cover shall be 0.9mm CRCA sheet reinforced with 25 x 25 x 3 mm M.S. angles or gate channel. The rolling shutters in addition to the above shutters have. Note: The measurement of shutter will be for chair opening (or) lath section provided shall be not less than 3 Nos for 2.4m high rolling shutters etc., complete complying with standard specificaiton and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames etc., Complete as directed by the departmental officers. (The ventilator should be got approved from the departmental officers before use on work).

SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three P.sand) 10mm thick, including hacking the surfaces including curing neat finishing etc., complete complying with standard specification and as directed by the departmental officers

PLASTERING with cement mortar 1:5 (one cement five P.sand) 12 mm., thick for walls in all floors including necessary scaffolding, curing, neat finishing etc., complete complying with standard specifications and as directed by the departmental officers

Manufacturing, Supplying and fixing in position STEEL GRILLS Square bars 12mm is welded to the inner face not exceeding 10cm spacing, All the members of the Grils shall be painted one coat with red oxide primer. The rate shall be inclusive of cost of all materials, labour charges including cost of welding electrodes, transportation to site of work loading, unloading and all other charges etc., Complete complying with standard specifications and as directed by the departmental officers.

PAINTING NEW IRON WORKS for doors, windows and Ventilators, Iron bars, Weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with TWO COAT of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. (The paint to be used should be got approved by the Executive Engineer before use on work)

FLOORING with scratch proof SHAHABAD TILES of approved quality and colour of in all floors over 20mm thick cement mortar 1:3 (one cement and three M.sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc., complete complying with standard specification and as directed by the departmental officer.

PAINTING the wall surface using best quality of TWO COAT of Exterior Emulsion Paint of the approved colour and quality as per the specification including ONE COAT OF PRIMER to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and the scaffolding charges.(The paint to be used should be got approved by the Executive Engineer before us on work). Complete and as directed by the departmental Officers.

WHITE WASHING ONE COAT using best quality (KOTTAYAM) White cement in floors including cost of white cement and other materials, brushes, scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of cost of gum, best quality of blue powder etc.,).

Painting the wall surface using best quality of PLASTIC Emulsion paint TWO COAT with ONE COAT OF PRIMER as per the Specification of the approved colour to give an even shade, including cost of brushes and all other materials required and scaffolding charges etc.,. Complete complying with standard specifications and as directed by the departmental officers ( The paint to be used should be got approved by the Executive Engineer before us on work.) (Rate including full wall putty (POP- White) finish.

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slacked lime (no M.sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required design and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc.,Complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of PRESSED TILES of size 23cm x 23cm x 2cm of approved quality laid in cement mortar 1:3 (One cement and three M.sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles etc., complete complying with standard specification (The rate is inclusive of red oxide and water proofing compound) and as directed by the departmental officers.

Supplying laying and jointing various diameter of PVC PIPES (Like Finolex or equivalent) and best variety conforming to I.S.S. and with I.S.I. mark including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to original condition including cost of special clamp with screws nails teak wood plugs and any other accssories necessary for fixing in position etc., Complete complying with the standard specification and as directed by the departmental officers.

4" dia PVC Pipe (4Kg/cm2) for rainwater disposal

Supplying of PVC specials of various diameter of best and approved brand and ISI make etc., complete as directed by the departmental officers.

110 mm Dia PVC Elbow

110 mm Dia PVC Shoe

Supplying and laying of cement concrete interlocking blocks (TAMIN Paver blocks) of required size of 60mm thick including laying ramming etc., Complete as directed by the departmental officers.

Supplying and fixing of G.I. Fly proof mesh windows with M.S.angles and lats of required size for fixing the mesh in position with necessary cutting, welding, boldts and screw etc., complete as directed by the departmental officers.