Tamil Nadu Agricultural University Tender

First Floor

Supplying, fabricating and placing in position mild steel / ribbed tor steel rods for all RCC works including cutting, bending to required shape and placing in position, cost of steel and binding wire and all labour charges, conveyance etc. in all floors. Complete complying with standard specfication and as directed by the departmental officers..

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS, STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over countrywood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete complying with standard specification and as directed by the departmental officers.

Column & Sunshade

Roof Slab, Lintel, Beam

BRICK WORK in cement mortar 1:5 (One cement and five M. sand) using best quality II class chamber burnt bricks of size 23x11x7cm (9" x 43/8" x 23/4") including curing etc., complete complying with standard specification and as directed by the departmental officers. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost.)

First floor

Second Floor

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slacked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required design and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jaggery water etc.,Complete complying with standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of PRESSED TILES of size 23cm x 23cm x 2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles etc., complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of red oxide and water proofing compound)

SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick, including hacking the surfaces, curing, neat finishing etc., Complete complying with standard specification and as directed by the departmental officers

Plastering with cement mortar 1:5 (one cement five M.sand) 12 mm., thick for walls in all floors including necessary scaffolding, curing, neat finishing etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing of CRCA Pressed steel box section 18 Gauge or 1.25 mm thick for DOOR FRAMES of size 100mm x 60mm including providing holes & fixing wooden blocks for fixing furniture & fittings etc.,without bottom,with necessary rebate of 30/15mm to house the shutters using cold rolled steel plate confiriming to ISI specification including rigid butt joint,nut and bolt assembly with nylon inserts not to be welded with special purpose hardware pre cleaned including phosphating as per ISI with rust preventive primer and ready to assemble condition for easy installation at site including dismantling making necessary chippings and holes in RCC columns,beams masonry etc.,wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc.,Complete complying with the standard specification and as directed by the departmental officers.in all floors.

Supplying and fixing in position of Medium Density Fiber board (MDF) flush shutters with exterior of nominal thickness of 38mm single or double shutter of any size conforming to ISS 12406 with necessary rebate cutting external lipping all round with latten dried soft wood including the cost of required aluminium anodized furniture fittings with 3 Nos. for single leaf and 6 Nos. for double leaf, necessary aluminium and chromium plates screws and the shutter fixed to the rebate in position etc., complete complying with standard specification and as directed by the departmental officers

Manufacturing, Supplying and fixing in position STEEL GRILLS. Square bars 12mm is welded to the inner face not exceeding 10cm spacing, All the members of the Grils shall be painted one coat with red oxide primer. The rate shall be inclusive of cost of all materials, labour charges including cost of welding electrodes, transportation to site of work loading, unloading and all other charges etc., Complete complying with standard specifications and as directed by the departmental officers.

BRICK WORK in cement mortar 1: 3 (One cement and three M. sand) using second class chamber burnt bricks of size 9" x 43/8" x 23/4" for the Partition walls including hoop iron reinforcement curing etc., complete complying with standard specifications and as directed by the departmental officers.

Brick Work in C.M. 1:3 (G.F)

WHITE WASHING ONE COAT using best quality (KOTTAYAM) White cement in floors including cost of white cement and other materials, brushes, scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of cost of gum, best quality of blue powder).

Painting the wall surface using best quality of PLASTIC Emulsion paint TWO COAT with ONE COAT OF PRIMER as per the Specification of the approved colour to give an even shade, including cost of brushes and all other materials required and scaffolding charges etc.,. Complete complying with standard specifications and as directed by the departmental officers ( The paint to be used should be got approved by the Departmental officer before us on work.)

PAINTING the wall surface with TWO COAT of Weather shield max exterior paint of approved colour as per the specification including ONE COAT OF PRIMER to give an even shade at the external walls with necessary scrapping including cost of brushes and all other materials required and scaffolding charges etc.,Complete complying with the standard specification and as directed by the departmental officers. (The paint to be used should be got approved by the departmental officers before us on work.)

PAINTING NEW IRON WORKS for doors, windows and Ventilators, Iron bars, Weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. (The paint to be used should be got approved by the Departmental officers. before use on work)

PAINTING NEW WOOD WORKS with TWO COAT of synthetic enamel paint of approved quality and colour OVER A PRIMING COAT with approved quality of white primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officers. (The paint to be used should be got approved by the Departmental officers. before use on work.)

Supplying laying and jointing various diameter of PVC PIPES of approved quality (Finolex) and best variety conforming to I.S.S. and with I.S.I. mark including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall by concealing them including chipping and making holes on the walls or drilling holes in the roof and making good the dismantled portions to original condition including cost of special clamp with screws nails teak wood plugs and any other accssories necessary for fixing in position etc., Complete complying with the standard specification and as directed by the departmental officers.

110mm Dia PVC Pipe (4Kg/cm2) for rainwater disposal

110mm Dia PVC Pipe (6Kg/cm2) for sanitary arrangements

75mm Dia PVC Pipe (6Kg/cm2) for sanitary arrangements

Supplying laying and jointing of UPVC Pipes of approved quality and best variety conforming to ISS and with ISI Mark of various diameter including cutting,threading and fixing of UPVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, pvc clamps and screws making the good the dismantled portion to original condition with necessary brick work and plastering wherever necessary scaffolding charges etc.,Complete complying with the standard specification and as directed by the departmental officers.

40mm dia External water supply above GL

20mm dia Internal water supply

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of with out pedestal of 550 X 400 mm with a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waste water pipe, 32mm dia C.P. Brass waste coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with I.S.I. mark and necessary G.I. Union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage etc., Complete complying with standard specification and as directed by the departmental officers. (The wash hand basin should be got approved by the Executive Engineer before use on work.)

Supplying and fixing of high density HDPE PVC tank like SINTEX TANK of approved quality and ISI make with necessary inlet and outlet having a capacity of 2000 litres and it has to be fitted over roof slab etc.,Complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (Open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM nd 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work etc. ,Complete complying with standard specification and as directed by the departmental officers.

FLOORING with scratch proof designed CERAMIC TILES of premium quality and colour of size 400x400x8mm in all floors over 20mm thick cement mortar 1:3 (one cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments at 3.00 kg/m2 etc., Complete complying with standard specification and as directed by the departmental officer. (C.E.(B) letter No. HDO/(1)/42336/2002/ dt. 2.12.2002.)

DADOOING THE WALLS with Designed GLAZED TILES of SIZE 300 x 200 x 6mm of best approved quality like Johnson or equilent make laid in cement mortar 1:2 (One cement and two M.sand) and pointing with the same white cement neatly to full depth of tiles in all floors etc.,Complete complying with standard specification and as directed by the departmental officers.(The colour of the tiles should be got approved by the Departmental officers before execution).

Providing Two Legged scaffolding using 15cm diameter casuarina posts (or) best quality of bamboo posts of 4m overall length (3.00m + 0.5m projection + 0.50m up to ground) the distance between the two rows with being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.50m overlap on eigher side and braces at 2m c/c including longitudinal and transverse middle braces to setup and providing a platform with country wood planks of 40mm thick and 1m width etc., in a complete form using coirs and nails etc., Complete complying with standard specification and as directed by the departmental officers. Scaffolding charges for a height of first 2.50m above 3m

Supplying and fixing in position best white glazed EUROPEAN WATER CLOSET of approved quality with 100mm 'P' or 'S' trap with double flapped rigid PVC seat cover with the CP brass hinges with PVC low level flush tank of 10 litres capacity including 2 Nos 15mm dia brass nipple, 15mm dia PVC brass connection, 15mm dia G.M. wheet valve, 15mm dia nylon connection and giving necessary water supply connection, etc., complete complying with standard specification and as directed by the departmental officers . (The water closet should be got approved by the Department officer before use on work)

Supplying and fixing of brass chromium plated SCREW DOWN TAP of approved make conforming to I.S.I. specification and quality including cost of shellac, thread, including cutting and threading wherever necessary etc., Complete complying with the standard specification and as directed by the departmental officers.(Screw down taps are to be got approved by the Department officer before use on work.)

Supplying and fixing in position of best Belgium Bevelled Edge MIRROR PVC/ Fibre glass framed 5.5mm thick mirror of approved brand and size of 600 x 450 mm fibre glass shelf type with necessary hard board backing and any other accessories necessary for fixing in position, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of best approved quality of brass Chromium Plated TOWEL RAIL, 600mm long and 20mm diameter with brackets of same material including cost of teak wood plugs and C.P screws etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality of size 580mm x 440 mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly concrete 1:2:5 (One lime, two M. sand and five brick jelly) and finishing the top to the required slope and including giving connection to the C.I. soil stracks by dismantling the masonry floor or RCC works and redoing the same to the original condition without any leakage etc., complete complying with the standard specification and as directed by the departmental officers. ( The water closet should be got approved by the Departmental Officer before use on work)

Supplying and fixing in position of Indian make white glazed earthenware lipped mouth, flat back URINALS of best approved quality with 15mm G.I. Pipe connection of suitable length, 32mm bell mouthed P.V.C. Connection, 15mm Gun metal wheel valve, fixing the Urinal to the wall in position with necessary teakwood plugs, clamps, screws, white lead etc., including dismantling masonry if necessary and redoing the same to original condition, fixing the 15mm dia G.I. pipe connection and wheel valve, painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage.Complete complying with standard specifications and as directed by the departmental officers. (The Urinal should be got approved by the Executive Engineer before use on work)

Supply and fixing of Solid PVC door shutters using 19 Gauge 19 mm MS square tubes for style & outer frames 15 mm MS square tubes for top, lock & bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC Sheets. Shutter using 5 mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size fo styles shall be 50 mm x 50 mm. The over all size of top rail lock rail and bottom rail shall be 75 mm x 30 mm. The over all size of frames shall be 50 mm x 45 mm with suitable rabate for housing the shutter. etc., Complete complying with the standard specification and as directed by the departmental officers.(with frame)

FLOORING with scratch proof premium grade Double charged VITRIFIED TILES of approved quality and colour OF SIZE 0.60 x 0.60 x 0.008m in all floors over 20mm thick cement mortar 1:3 (one cement and three M. sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc., complete complying with standard specification and as directed by the departmental officers.