Structural Engineering Research Center Tender

Providing and fixing Asbestos cement sheets of size 3.00 x 1.05 m, thickness of Sheet: 6 mm.The sheet shall be fixed G.I coated J or L hooks, bolts and nuts 8mm diameter with bitumen washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc., complete all as per the instruction of Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within CSIR Campusetc., complete all as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete all as per the instruction of Engineer-in-charge.

On steel work

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

New / Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface including water thinnable priming coat with cement primer for new work (The rate is inclusive of necessary touch up Exterior wall care putty and scrapping wherever is required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Gutter .(600 mm over all girth)

Providing and fixing Polyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (Finolex or equivalent make )

PART - B ( ELECTRICAL) : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group A

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200 mmX75 mm)

12 Module (200 mmX150 mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.

6 Module

12 Module

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing extra conduit down rod of 20 cm length G.I.pipe 15 mm dia, heavy gauge including painting etc. As required.

Supplying and fixing of surface mounted IP 65 Weather proof outdoor 40 W LED Industrial Batten Fitting (CIS - 301 - 40 - 57 - HL3 - DP - NWH ), and other accessories, make Crompton Complete with connections,testing and commissioing as required.removing the old fitting and handing over the same to Engg In Charge.

Supply and fixing of Min 45 W high power white LED street light luminaire IP 65 made out of pressure dir cast aluminiam alloy with toughened glass,power electronic circuits shall have over voltage ,over current and over temperatute protection including with suitable GI pipe for out side wall surface, connections, testing as required as per site condition as required, Warranty Minimum 2 Years Make : Crompton. CRP-423-45-57-SL-GL-NSG 240V 50HZ

Supplying and fixing of 300 x 300 x 170 Hensel Transparant lid open IP 65 Box complete with connections, testing and commissioning etc. as required.

Supplying and fixing of Weatherproof cabinets IP-65 - IK 09 class II door and cabinets fully reversible box.(Legrand) complete with connections, testing and commissioning etc. as required.

Labour charges for removing the old PDB,LDB,FDB,existing Tube Light fittings and old switch box, MS conduit pipe wiring from ceiling and wall and handover to electrical maintenance department etc., as required.