State Industries Promotion Corporation Of Tamil Nadu Limited Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
State Industries Promotion Corporation Of Tamil Nadu Limited - SIPCOT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Feb 2023
Closing Date16 Mar 2023
Tender Amount₹ 15,92,94,000
Costs
EMD
₹ 8,07,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_SIPCT_285962_1Bid Award Id
ViewTender No
NIT.No.38/CD/T.No.38/2022-23Tender Authority
State Industries Promotion Corporation Of Tamil Nadu Limited ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
2-3 m depth
194
-
-
... More
Plain Cement concrete 1:4:8 (one cement, four M sand and Eight aggregate) 15cm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification and as directed by the SIPCOT officers.
288
-
-
... More
Supplying and filling in foundation, basement, etc with Filling Granular Sub Base in layers of not more than 40 cm thick well watered, Without consolidation etc. complete complying with standard specification and as directed by the SIPCOT officers.
610
-
-
... More
Supplying and filling in foundation, basement, etc with M sand Gravel mix in ratio of 1:1 in layers of not more than 15 cm thick thoroughly mixed, well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT officers.
1703
-
-
... More
Providing Vaccum Dewatering concrete Flooring (VDF) with Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) , etc., complete complying with standard specification and as directed by the SIPCOT officers
356
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (Side Shuttering)
1149
-
-
... More
Rainforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers
-
-
-
... More
Upto Basement
276
-
-
... More
Ground Floor
18
-
-
... More
Suppling fabricating and placing in position of Ribbed tor steel for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc., complete complying with relevant standard specifications and as directed by the SIPCOT officers.
78
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For Plane Surface Such as retangular or Sqaure Columns,Sunshades , Top and Bottom slab of RCC boxing , etc
204
-
-
... More
Brick work in CM 1:3 (one of cement and Three of MM sand) using chamber burnt second class ground moulded stock bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) for stair case steps including proper setting, scaffolding, curing etc., complete in all respects in all floors and as directed by the SIPCOT officers
141
-
-
... More
Providing and fixing Frameless Glass Partitions with 12mm Clear Toughened glass for maximum height of 3400mm.Glass shall be supported at top and bottom with aluminium'U'Channel of size: 25x40mm and suitable PVC/rubber wedges.Channel to be fixed at bottom into groove cut in flooring with Fischer Hammer fix fastners.Channel at top to fixed into support frame using aluminium box section of size:100x45x2mm using clamps,anchor bolts and Fischer Hammer fix fastners.Weather sea lent to be applied between channel and glass and between glass joints to form complete glass partition.
102
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers. (Interior Plastering)
1368
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers. (Exterior Plastering)
1273
-
-
... More
Structural Steel work- Providing, fabricating and fixing in position MS inserts such as nosing, corner angles of columns, plates, flats, tee's, protection channels of reception dock, supports, brackets and monorails, hooks, frame around cut-out, MS pipe sleeves etc as per drawings and specifications, in true line and levelincluding embedding the same in to the permanent works at the time of catsing of RCC works or fixing with or without base plate fixed to RCC element with appropriate size expansion bolts as per design with necessary welding, grinding and painting with 2 or more coats of approved quality synthetic enamel paint over a coat of primer etc complete as directed. by the SIPCOT Officers
18.56
-
-
... More
providing and fixing anchor bars of the requred diamters tor steel in foundation up to 1.5 m deep in rock and 1.5 m above rock for following diameter tor steel dowel bar in foundation including drilling suitable diameter bore hole in rock with necessary bending, hooking, tying reinforcement in position and grouting etc and excluding the cost of reinforcement complete as per drawing and specifications.
0.29
-
-
... More
Design, fabrication, supply and erection of PEB structure by using the built up sections are made from hot rolled platers conforming to ASTM A - 572 GR 50 and other sections except beams are mill sections complying with IS :2062 and the section should be provided with 2 coats of Zinc Phosphate anti corrossion paint after M sand blasting and 2 coats of enamel paints as per the approved colour. Bracing rods and sag rods are made of steel bars conforming to IS 2062 with aminimum yiled strength of 240 MPA. All the fasteners should be confirmed as per the IS/ ASTM specifcations. The roofing and facsia board should be Zinc Aluminium alloy coated colour roof sheet of 0.47mm nominal thickness, cold roll formed from a cold rolled coil confirming to Astm a 792 m grade 80 with a minimum yeild strength of 550 mpa. The EVES Gutter should be provided with Zinc Aluminium alloy coated steel sheet of 0.8T with GI Gutter hangers. Downspouts should be provided with 100mm size of Zinc Aluminium coated sheets with GI with GI laedre straps. Galvansied purlin should be adopted as per the required size. The quoted price should include the supply and fixing charges of MS inserts in the concrete day light sheets in the roof.
52.76
-
-
... More
Providing corrugated G.S sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts nuts 8 mm diameter with bitumen and G.I implet washers or with G. I limpet washers filled with white lead, including a cost of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface), excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.
2945
-
-
... More
Supplying, Fabricating at CONTRACTOR's , transporting fabricated items to site, unloading, storing, erecting in position and testing/ examining , bolted and/ or welded STRUCTURAL STEEL WORKS of Grade SHS 150 X150 hollowbox (conforming to IS:4923-2017 at all locations and levels including all builtup sections/ compound sections made out of rolled sections and/or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) after fabrication etc.. all complete. Supply of all materials in contractors scope.
2.35
-
-
... More
2.1Supply and installation of GRG Core Ceiling (or) Equivalent Brand of Acoustical False Ceiling of Tiles of size 595 x 595 x 15mm having volume density 270 kgss / m3, weight 4kgs / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module ncludes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15.Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. GRG Core Ceiling of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not lessthan 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication.
126
-
-
... More
Supplying and erecting of pull and push type manually operated Rolling Shutter of approved size and section using 18 guage G.I. Sheet confirming to ISI standard with Hood covers including one coat of approved primer transport charges etc. complete in all respects, complying with relevant standard specifications and as directed by the SIPCOT officers (The Model/Brand of the Rolling shutter has to be got approved by the SIPCOT Officer before fixing).
28
-
-
... More
Providing & Fixing of Frameless partition with door glazing consisting of 12mm clear toughened glass (Saint Gobin or equivalent) and fixing with single leg spider , ceiling /bottom to glass connector , glass to glass connector , handle , door set ,floor spring , pivot etc. and all the necessary fittings upto all height including Scaffolding and labour all complete as directed by SIPCOT Officer
17
-
-
... More
Supplying and fixing of solid PVC door shutters using 19 gauge 19mm MS sq.tubes for styles and outer frames. 15mm MS sq. tubes for top,lock and bottom rails the steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fitting. The overall styles shall be 50x30mm.The overall size of top rail, lock rail and bottom rail shall be 75mmx30mm.The overall size of frames shall be 50x45mm,with suitable rebate for housing the shutters. including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete as directed by the SIPCOT officers. (Fittings provided shall bear ISI mark . The quality and brand of door shutter and furniture fittings should be got approved by the SIPCOT officer before use)
10
-
-
... More
Supplying and fixing of Aluminium Door Stopper with Rubber Bush with required screws complete complying with standard specification and as direted by the SIPCOT officers
5
-
-
... More
Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1200mm x 1400mm with following specification:a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy
Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS
g. Door Closer with Standard Arm Finish: Silver
h. Lock Set: Dead Lock with both side key
i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns
l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent
n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame
o. Rated Glass Schott Pyran with Frame p. Anchor Bolt with Endcaps
The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the SIPCOT Officers.
2
-
-
... More
Supply &fixing Mild steel grill of approved design The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete and as directed by the SIPCOT officers
720
-
-
... More
UPVC WindowSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPCOT Officer before use on work
60
-
-
... More
UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round theframes. The ventilator should be got approved from the SIPCOT Officer before use on work
2
-
-
... More
Supplying and fixing in position of colour Vitrified Floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of MM sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the SIPCOT officers. (Double Charged Vitrified Tiles 600 x 600 x 8mm)
155
-
-
... More
Self-leveling epoxy floor for 7 mm thicka) Surface Preparation:By any one of the suitable methods based on site conditions /availability.b) Primer Coat: Over the cleaned surface apply one coat of solvent less epoxyPrimer for a thickness of 100 to 150 microns for bonding epoxy flooring toConcrete surface. c) Epoxy underlay/screed (5.0 mm): Over the primed surface apply EpoxyMortar underlay to a thickness of 5 mm to cover the undulation orIrregularities in the floor to make it uniform. d) Primer Seal Coats (0.5 mm): Over the screed two coats of epoxy primer sealCoat to seal off the pores in the screed and also to act as an intermediate coatBetween screed & topcoat. e) Self leveling epoxy floor topping 1.5 mm): Over the Seal coats, applicationof around 1.5 mm thick three component epoxy-self leveling colored floorWith smooth and glossyfinish.(choice of colour-as specified by Engineer in charge)
1759
-
-
... More
Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three M sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kgs. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
23
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
15
-
-
... More
Fine Polished B62Granite Slab Front Edge Nosing for Granite Slab as per standard speciffication150mm x 150mm x 6mm)
27
-
-
... More
Dadooing walls with following best approved quality, white colour glazed tiles of sizes set in Cement Mortar 1:2 (One Cement and Two M sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kgs. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the SIPCOT officers.
16
-
-
... More
Weathering course with broken brick jelly lime concrete using 20mm gauge broken brick jelly in pure slaked lime ( no M sand) over roof slab to the proportion of brick jelly to lime ( Fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters, for giving the required slope and thickness complying with relevant standard specification and as directed by the SIPCOT officers.
2
-
-
... More
Providing Polymer coating (Water Proof coating) for sunken portion of toilet with following specification and the surface shal be cleaned to remove all dust,foreign,matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry : Dry blend and polymer liquid shall be mixed into desired ratio as per recommandation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix.any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleanes surface.After drying,second coat shall be applied on the first coat as directed by the SIPCOT officers etc,The rate inclusive of cost of materials and labour,etc complete complying with standard specication and as directed by the SIPCOT officers
2
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. as directed by SIPCOT offcicer
1368
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification as directed by SIPCOT offcicer
1273
-
-
... More
Painting new iron work with two coats of approved I st class synthetic ready mixed enamel paint of approved quality, brand and shade over the existing priming coat. The paint should be supplied by the contractor at his own cost. (The quality and shade of the paint should be got approved from the Executive Engineer before use on works) etc. all complete complying with relevant standard specifications and as directed by the SIPCOT officers
62
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
36
-
-
... More
Supply & Installation of wood polymer Composite Panel of Size 2.900x0.156x0.021mm with epoxy primer coated MS tube insert to be anchored to the floor / ceiling through a base plate/wall bracket with necessary mechanical expansion anchors with necessary fixtures, including scaffolding charges. All complete complying with relevant standard specifications and as directed by the SIPCOT officers
1245
-
-
... More
ELECTRICAL SUPPLY & ARRANGEMENT
-
-
-
... More
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & office, etc.) and as directed by SIPCOT Officers
86
-
-
... More
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour as directed by SIPCOT Officers.
900
-
-
... More
Supply and run of 2 of 2.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour and as directed by SIPCOT Officers
1500
-
-
... More
MODULAR SWITCHES & SOCKETS
-
-
-
... More
Supply and Fixing of 6A Switch 1W - 1 Module etc completed as directed by SIPCOT offcier
69
-
-
... More
Supply and Fixing of 16A Switch 1W - 1 Module etc completed as directed by SIPCOT offcier
13
-
-
... More
Supply and Fixing of Stepped Electronic 300W / 450W Square Type
Fan Regulator etc completed as directed by SIPCOT offcier
5
-
-
... More
Supply and Fixing of 6/16A Socket - 2 Module etc completed as directed by SIPCOT offcier
13
-
-
... More
Supply and Fixing of 6A 5 pin Universal Socket - 2 Module etc completed as directed by SIPCOT offcier
69
-
-
... More
FLUSH MOUNTING BOXES (GI)
-
-
-
... More
Supply and Fixing of Flush Box - 1/2 Module etc completed as directed by SIPCOT offcier
10
-
-
... More
Supply and Fixing of Flush Box - 3 Module etc completed as directed by SIPCOT offcier
20
-
-
... More
Supply and Fixing of Flush Box - 4 Module etc completed as directed by SIPCOT offcier
5
-
-
... More
Supply and Fixing of Flush Box - 6 Module etc completed as directed by SIPCOT offcier
15
-
-
... More
Supply and Fixing of Flush Box - 8 Module etc completed as directed by SIPCOT offcier
10
-
-
... More
COMBINED PLATES (PLASTIC)
-
-
-
... More
Supply and Fixing of 1 Module Cover Plate etc completed as directed by SIPCOT offcier
1
-
-
... More
Supply and Fixing of 2 Module Cover Plate etc completed as directed by SIPCOT offcier
8
-
-
... More
Supply and Fixing of 3 Module Cover Plate etc completed as directed by SIPCOT offcier
20
-
-
... More
Supply and Fixing of 4 Module Cover Plate etc completed as directed by SIPCOT offcier
5
-
-
... More
Supply and Fixing of 6 Module Cover Plate etc completed as directed by SIPCOT offcier
20
-
-
... More
Supply and Fixing of 8 Module Cover Plate etc completed as directed by SIPCOT offcier
10
-
-
... More
Supply and fixing of 24A flush type wall socket with 25A DP MCB for AC Plug
5
-
-
... More
Supply and fixing of 100WATTS Highbay light etc completed as directed by SIPCOT offcier
30
-
-
... More
Supply and fixing of 24W LED 4000K 2x2 Square type Recessed Fitting with LED
34
-
-
... More
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp etc., complete and as directed by SIPCOT Officers.
3
-
-
... More
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete and as directed by SIPCOT Officers.
5
-
-
... More
Supply and fixing of 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD
WITH MCB 6 way TPMCB sheet steeldistribution boards flush type / surface type fitted withbus bars and neutral links with single / three phase MCB outgoings and separate 6 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 6 ways in each segment) and separate provisions for MCB / Isolator (totally 18 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.
3
-
-
... More
MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTORCIRCUITS
-
-
-
... More
Supply and Fixing of Single Pole 6A to 32A, 10KA etc completed as directed by SIPCOT offcier
62
-
-
... More
Supply and Fixing of Triple Pole & Neutral 63A, 10KA etc completed as directed by SIPCOT offcier
3
-
-
... More
Supply and Fixing of 40 Amps 30 MA DP etc completed as directed by SIPCOT offcier
9
-
-
... More
Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A) 8 Way, MCCB + 24 Modules etc completed as directed by SIPCOT offcier
1
-
-
... More
Supply and Fixing of Triple Pole 32A, 10KA v etc completed as directed by SIPCOT offcier
8
-
-
... More
40 Amps 30 MA DP etc completed as directed by SIPCOT offcier
1
-
-
... More
SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 8 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm
1
-
-
... More
Supply and Fixing of 125A TP MCCB etc completed as directed by SIPCOT offcier
1
-
-
... More
Fire Fighting Arrangement
-
-
-
... More
Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officers. (Make: Apollo /Equivalent)
54
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officers. (Make: Ravel / Equivalent)
9
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the SIPCOT Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT
9
-
-
... More
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the SIPCOT Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT
9
-
-
... More
Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officers.
9
-
-
... More
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE
2
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: KIARTAR / OMEX / EQUIVALENT.
1
-
-
... More
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
2
-
-
... More
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the SIPCOT Officers -
1
-
-
... More
Supply, erection, testing and commissioning of MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the SIPCOT Officers. Make: JINDAL / EQUIVALENT -
-
-
-
... More
Hydrant Pipe
-
-
-
... More
100mm Dia
12
-
-
... More
Sprinkler Pipe
-
-
-
... More
100mm Dia
81
-
-
... More
80mm Dia
178
-
-
... More
40mm Dia
362
-
-
... More
25mm Dia
288
-
-
... More
Supply, fixing, testing & commessioning of dial type (150mm) Glycerin filled pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no syphon, cost shall be inclusive for providing any short pieces, nipples, elbows etc all complete as per standard specification and directed by the SIPCOT officers
2
-
-
... More
Providing, fixing pipe supports 100mm dia from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
30
-
-
... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE
GUARD / EQUIVALENT.
240
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: HGURU / ISI MAKE / EQUIVALENT.
3
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: KARTAR /
EQUIVALENT
1
-
-
... More
Water Supply Arrangement
-
-
-
... More
Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. and as directed by SIPCOT Officers.
-
-
-
... More
40mm PVC - 10kg/cm2 Pipes
5
-
-
... More
25 mm PVC - 10kg/cm2 Pipes
17
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe type B class conforming to IS 13592and relevant specials including packing the joints with rubber lubricant fixing them into walls with necessary GI Bolts and Nuts with special clamp made of MS angle/Flat including cutting, bending (excluding the cost of MS angle/flat) holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with relevant standard specification and as directed by the SIPCOT officer
-
-
-
... More
Soil Pipe - (110mm Pipe 6kg/cm2)
52.5
-
-
... More
Wastewater Pipe - (110mm Pipe 6kg/cm2)
57
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. cand as directed by SIPCOT Officers.
-
-
-
... More
110 mm dia PVC- 4 kg/cm2 pipes
230
-
-
... More
Supply and fixing of GM Gate Valve 40mm Dia heavy type with necessary flanges, gaskets, nuts and bolts complete as required and shall be compatable with Composite pipes as applicable.etc., complete complying with relevant standard specification and as directed by the SIPCOT officer. The quality and brand Gate Valves is to be got approved by the Department officer before fixing
2
-
-
... More
Supplying and fixing of C.P 2Way Bip cock Long body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality and brand of fittings should be check before use).
5
-
-
... More
Supplying and fixing of C.P Bip cock Short body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality and brand of fittings should be check before use).
5
-
-
... More
Supplying and fixing of Stainless Steel Health faucet including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality of fittings should be Check before use).
4
-
-
... More
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT officers. (The urinal should be got approved by the SIPCOT Officer before use on works.)
2
-
-
... More
Supply & fixing of PVC Prelaminated Board of 12-18mm thick for Toilet Partition etc complete complying with standard specification and as directed by the SIPCOT officers.
32
-
-
... More
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT officer before use on works)
4
-
-
... More
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT officers. (The wash hand basin and specials should be got approved by the SIPCOT officers before use on works).
5
-
-
... More
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of M sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT officers before use on works) (Cast Iron Nahani Trap of size 100 x 75mm with stainless steel gratings)
7
-
-
... More
supply and fixing of pvc water tank 5000 liter capacity with all accessories approved bt dept officers
2
-
-
... More
HVAC
-
-
-
... More
Manufacturing, Supplying and Fixing of 11TR floor mounted ductable centrilized Air conditioner, complete complying with standaard specifcication and as directed by the SIPCOT officers.
1
-
-
... More
Cold storage
-
-
-
... More
Supply of cold storage puf panels for room size 18mt x 15mt x 7.5mt with 3mt x 3mt sliding door along with all installation accessories
1074
-
-
... More
Supply of 24 kw coming capacity refrigeration system 3 nos indoor and out door
3
-
-
... More
Supply of refrigeration pipr line suction and liquid line with necessary fittings and insulation 25 rmt each pipe line
75
-
-
... More
supply of r404 gas 15 kg each unit
45
-
-
... More
supply of electrical control panel
1
-
-
... More
supply of electrical cable indoor unit and outdoor unit with all necessary fittings.25 rmt indoor 15rmt outdoor unit
40
-
-
... More
labour charges for installation coldstorage puf panels
1074
-
-
... More
labour charges for installation of refrigeration system unit pressure testing leak arresting charging gas testing and commissioning
3
-
-
... More
CCTV
-
-
-
... More
Supply,Installation , testing and commisioning of 3Mpx Indoor dome 2048 x 1536 at 30fps, Autofocus Motorized remote zoom lens 2.8 - 12mm, H.265, H.264 compression, 50mtr Adaptive IR, 120dB true WDR as per IEC 62676. Minimum Illuminator @F1.4 0.016lux color; 0.007lux Mono, 3D noise
filtering, Bi directional Full Duplex Audio, inbuilt mic, 1 Alarm In, 1 Alarm out,
3 independant stream, 8nos of configurable privacy mask, Supported protocol - TCP/IP, Ipv4 & IPv6,UDP/IP, DNS, DDNS,ARP, ICMP, IGMP, RTCP, SFTP, SIP, TLS/TTLS, ARP.802.1x (EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP and EAP-FAST). Edge based analytics - Object
Counting, Adaptive Motion, Object Removal, Motion Detection, Camera Sabotage, Audio Detection, and Directional Motion. Camera shall features of Corridor mode, Mirror mode, having SD card provision of 2TB, Operating temperature -10 to +55deg C,IK10,Works on PoE, 24 VAC & 12VDC, Power consumption 12W, ONVIF profile S,G, Q & T,Cybersecrutiy Cert:UL/NDAA, CE - EN 55032 (Class A), EN 50130-4, EN 60950- 1,FCC (Class A) - 47 CFR Part 15,UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07, BIS certified.to ruggedized performace camera should meet Shock & Vibration Certifcation:IEC 60068:2-6 and 2-27 The Camera to be provided by OEM should not be complying to GB28181, GB/T28181-2011 standards and there should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings.All complete complying with relevant standard specification and as directed by the Engineer (Brand: Dahua or equivalent)
16
-
-
... More
Supply,Installation , testing and commisioning of 3Mpx Bullet 2048 x 1536 at 30fps, Autofocus Motorized remote zoom lens 2.8 - 12mm, H.265, H.264 compression,Smart Codec, internal/external 50mtr Adaptive IR, 120dB true WDR as per IEC 62676. Minimum Illuminator @F1.4 0.016lux color; 0.007lux Mono, 3D noise filtering, Bi directional Full Duplex Audio, 1 Alarm In, 1 Alarm out, 3 independant stream, 8nos of privacy mask, Supported protocol - TCP/IP, Ipv4 & IPv6,UDP/IP, DNS, DDNS,ARP, ICMP, IGMP, RTCP, SFTP, SIP, TLS/TTLS, ARP.802.1x (EAP-MD5, EAP-TLS, EAPTTLS, EAP-PEAP and EAP-FAST), Edge based analytics - Motion Detection, Camera Sabotage, Audio Detection, Object Counting, Adaptive Motion, Object Removal, and Directional Motion. Camera shall features of Corridor mode, Mirror mode, to ruggedized performace camera should meet Shock & Vibration Certifcation:IEC 60068:2-6 and 2-27, Camera should having SD card provision of 2TB,Contruction:Aluminium, Operating temperature -40 to +60deg C, IP66 and IP 67, IK10,Type 4 X Certification, Works on PoE , 24VAC & 12 VDC, Power consumption 37W, ONVIF profile S,G, Q & T, Cybersecrutiy Cert:UL/NDAA, CE - EN 55032 (Class A), EN 50130-4, EN 60950-1, FCC (Class A) - 47 CFR Part 15,UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07, UL/IEC/EN 60950-22, ICES-003 (Class A) BIS certified The Camera to be provided by OEM should not be complying to GB28181, GB/T28181-2011 standards and there should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings. (Brand: Dahua or equivalent)
13
-
-
... More
Supply installation Testing and Commissioning of Video Management Server with 32 Channel - 2 SATA (2 Nos. Hard Disk).
It should have Intel® Xeon® Silver 4210 or better with 64 GB DDR4 ECC RAM or better. It should run on Microsoft® Windows® Server 2016 or latest.It should have 960 GB SSD for operating system. For Optimized smooth performance of video, it should have Matrox G200eR2 Graphics. It should have dual power supply. it should have 1GbE Network ports (2x), 10GbE SFP+ ports (2x). it should support IPv4 and IPv6 version. *Enables and supports Risk Management Framework (RMF) *TLS-based encryption over HTTPS *Supports video and data encryption using AES-128-256 through third-party disk encryption software *Incorporates FIPS 140-3 validated cryptographic modules *Data base server should support N+N (1+1 in this case) redundancy.
*Load balancing for DB redundancy should be considered. All complete complying with relevant standard specification and as directed
by the Engineer
2
-
-
... More
Supply fixing and Installation of 24 Port POE Switch 24 ports 10/100/1000Mbps 2 port 1000M SFP Port 1/2 ≤60 Port 3-24 ≤30W Total≤240W
1
-
-
... More
Supply fixing and Installation of 8 Port POE Switch 16 ports 10/100/1000Mbps 2 port 1000M SFP Port 1/2 ≤60W， Port 3-16 ≤30W Total≤190W
2
-
-
... More
Installation of 8TB Surveillance hard disk
4
-
-
... More
Supply fixing and Installation of 6core Outdoor OFC unarmored overhead cable
590
-
-
... More
Supply fixing and Installation of Fiber Media Convertor T10/100 , Fiber Optic Patch Cord with RJ45 Connector (Brand : Tplink or equivalent)
29
-
-
... More
Supply fixing and Installation of D-Link 8Port Gigabyte Switch (10/100/1000)
2
-
-
... More
Installation Testing & Commissioning Charges Scoops Of work Fixing of RJ45 Connector & Configure CCTV Camera
29
-
-
... More
Supply , Installation , Testing and Commissioning of 43" LED 24x7 operational displays with necessary accessories etc.,.All complete complying with relevant standard specification and as directed by the Engineer
2
-
-
... More
LAN NETWORKING -ABSTRACT ESTIMATION
-
-
-
... More
Supply fixing and Installation of LAN NETWORK SWITCHES : Fully Managed 10/100/1000 Layer -3 with 10G Uplink - 24 Port with Fibre Port
2
-
-
... More
Supply fixing and Installation of I/O Socket - Face Plate Dual Socket RJ -45 With CAT 6 PVC Module Box
20
-
-
... More
Supply fixing of Rack With Accessories - 9U Rack
2
-
-
... More
Supply fixing and Installation of Patch Cord -3 Metre Length
40
-
-
... More
Supply fixing and Installation of CAT 6 Armoured Lan Cable with RJ 45
72
-
-
... More
TP-Link WiFi 6 AX1500 Mbps Archer AX10,Smart WiFi,Triple-Core CPU, Gigabit, Dual-Band OFDMA, MU-MIMO, Compatible with Alexa, Wireless Router,Black (TP Link -Business Router) (Vendor Spec)
2
-
-
... More
Supply, fixing and Installation of Face recognition And Fingerprint Biometric Reader with communication interface of WIFI,TCP/IP,RS232/485 and USB , and 1GHz High Speed CPU Processor , 125kHz EM RFID Card ,4.3" touch Screen 480x272 Pixel LCD ,16 bit Hi-Fi Voice & Sound Indication Brand: BioMax/ Equivalent etc complete complying with standard specification and as directed by the SIPCOT officers
3
-
-
... More
Supply,fixing and Installation of S-Tech EPABX Machine CS416 for Main Trunk Lines and 50Extension Telephone Intercom SystemCapacity: 4 Main Lines (Trunk Line/ P and T) and 512 Extension ,Internal/External Music on Holding, Operator/Auto-attendant Mode, Remote Programming Day/Night Mode(Manual), Music & Ringing Recordable OGM(outgoing message), Music Duration 20 Seconds Caller ID, Call Transfer, Call Forwarding Manually, Outgoing Call Transfer, Power Failure Transfer, Specific Main Line (C.O./Trunk Line) Dialing, Three Way Conference, Do Not Disturb, Auto/Manual Dial-Out Mode
2
-
-
... More
PART B ( Metal Finishing Facility and Medical Grade Moulding block )
-
-
-
... More
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. - Earth work excavation for foundation in all soils and sub-soils
-
-
-
... More
0-2 m depth
538.61
-
-
... More
2-3 m depth
148.12
-
-
... More
Plain Cement concrete 1:4:8 (one cement, four M sand and Eight aggregate) 15cm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification and as directed by the SIPCOT officers.
164
-
-
... More
Supplying and filling in foundation, basement, etc with Filling Granular Sub Base in layers of not more than 40 cm thick well watered, Without consolidation etc. complete complying with standard specification and as directed by the SIPCOT officers.
108
-
-
... More
Supplying and filling in foundation, basement, etc with M sand Gravel mix in ratio of 1:1 in layers of not more than 15 cm thick thoroughly mixed, well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT officers.
891
-
-
... More
Providing Vaccum Dewatering concrete Flooring (VDF) with Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) , etc., complete complying with standard specification and as directed by the SIPCOT officers
194
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (Side Shuttering)
1084
-
-
... More
Rainforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers
-
-
-
... More
Upto Basement
225
-
-
... More
Ground Floor
20
-
-
... More
Suppling fabricating and placing in position of Ribbed tor steel for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc., complete complying with relevant standard specifications and as directed by the SIPCOT officers.
58
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For Plane Surface Such as retangular or Sqaure Columns,Sunshades , Top and Bottom slab of RCC boxing , etc
224
-
-
... More
Brick work in cm 1:3 (one of cement and four of M sand) using chamber burnt second class ground moulded stock bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) for stair case steps including proper setting, scaffolding, curing etc., complete in all respects in all floors and as directed by the SIPCOT officers
143
-
-
... More
Providing and fixing Frameless Glass Partitions with 12mmClear Toughened glass for maximum height of 3400mm.Glass shall be supported at top and bottom with aluminium'U'Channel of size: 25x40mm and suitable PVC/rubber wedges.Channel to be fixed at bottom into groove cut in flooring with Fischer Hammer fix fastners.Channel at top to fixed into support frame using aluminium box section of size:100x45x2mm using clamps,anchor bolts and Fischer Hammer fix fastners.Weather sea lent to be applied between channel and glass and between glass joints to form complete glass partition.
485
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers. (Interior Plastering)
1284
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers. (Exterior Plastering)
644
-
-
... More
Structural Steel work- Providing, fabricating and fixing in position MS inserts such as nosing, corner angles of columns, plates, flats, tee's, protection channels of reception dock, supports, brackets and monorails, hooks, frame around cut-out, MS pipe sleeves etc as per drawings and specifications, in true line and levelincluding embedding the same in to the permanent works at the time of catsing of RCC works or fixing with or without base plate fixed to RCC element with appropriate size expansion bolts as per design with necessary welding, grinding and painting with 2 or more coats of approved quality synthetic enamel paint over a coat of primer etc complete as directed.
11.98
-
-
... More
providing and fixing anchor bars of the requried diamters tor steel in foundation up to 1.5 m deep in rock and 1.5 m above rock for following diameter tor steel dowel bar in foundation including drilling suitable diameter bore hole in rock with necessary bending, hooking, tying reinforcement in position and grouting etc and excluding the cost of reinforcement complete as per drawing and specifications.
0.21
-
-
... More
Design, fabrication, supply and erection of PEB structure by using the built up sections are made from hot rolled platers conforming to ASTM A - 572 GR 50 and other sections except beams are mill sections complying with IS :2062 and the section should be provided with 2 coats of Zinc Phosphate anti corrossion paint after M sand blasting and 2 coats of enamel paints as per the approved colour. Bracing rods and sag rods are made of steel bars conforming to IS 2062 with aminimum yiled strength of 240 MPA. All the fasteners should be confirmed as per the IS/ ASTM specifcations. The roofing and facsia board should be Zinc Aluminium alloy coated colour roof sheet of 0.47mm nominal thickness, cold roll formed from a cold rolled coil confirming to Astm a 792 m gRADE 80 WITH A MINIMUM YILED STRENGTH OF 550 mpA.THE EVES GUTTER SHOULD be provided with Zinc Aluminium alloy coated steel sheet of 0.8T with GI Gutter hangers. Downspouts should be provided with 100mm size of Zinc Aluminium coated sheets with GI with GI laedre straps. Galvansied purlin should be adopted as per the required size. The quoted price should include the supply and fixing charges of MS inserts in the concrete day light sheets in the roof.
36.65
-
-
... More
Providing corrugated G.S sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts nuts 8 mm diameter with bitumen and G.I implet washers or with G. I limpet washers filled with white lead, including a cost of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface), excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.
1724
-
-
... More
Supplying, Fabricating at CONTRACTOR's , transporting fabricated items to site, unloading, storing, erecting in position and testing/ examining , bolted and/ or welded STRUCTURAL STEEL WORKS of Grade SHS 150 X150 hollowbox (conforming to IS:4923-2017 at all locations and levels including all builtup sections/ compound sections made out of rolled sections and/or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per EIL Specification No. 6-79-0020 (or as per Job Specification, wherever applicable) after fabrication etc.. all complete. SUPPLY OF ALL MATERIAL IN CONTRACTOR'S SCOPE.
5.33
-
-
... More
Supply and installation of GRG Core Ceiling (or) Equivalent Brand of Acoustical False Ceiling of Tiles of size 595 x 595 x 15mm having volume density 270 kgss / m3, weight 4kgs / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module ncludes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15.Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. GRG Core Ceiling of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not lessthan 0.5 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc., complying to standard specication
432
-
-
... More
Supplying and erecting of pull and push type manually operated Rolling Shutter of approved size and section using 18 guage G.I. Sheet confirming to ISI standard with Hood covers including one coat of approved primer transport charges etc. complete in all respects, complying with relevant standard specifications and as directed by the SIPCOT officers (The Model/Brand of the Rolling shutter has to be got approved by the SIPCOT Officer before fixing).
27
-
-
... More
Providing & Fixing of Frameless partition with door glazing consisting of 12mm clear toughened glass (Saint Gobin or equivalent) and fixing with single leg spider , ceiling /bottom to glass connector , glass to glass connector , handle , door set ,floor spring , pivot etc. and all the necessary fittings upto all height including Scaffolding and labour all complete as directed by SIPCOT Officer all complete and as directed by the SIPCOT officers
32
-
-
... More
Supplying and fixing of solid PVC door shutters using 19 gauge 19mm MS sq.tubes for styles and outer frames. 15mm MS sq. tubes for top,lock and bottom rails the steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fitting. The overall styles shall be 50x30mm.The overall size of top rail, lock rail and bottom rail shall be 75mmx30mm.The overall size of frames shall be 50x45mm,with suitable rebate for housing the shutters. including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete as directed by the SIPCOT officers. (Fittings provided shall bear ISI mark . The quality and brand of door shutter and furniture fittings should be got approved by the SIPCOT officer before use
21
-
-
... More
Supplying and fixing of Aluminium Door Stopper with Rubber Bush with required screws complete complying with standard specification and as direted by the SIPCOT officers
12
-
-
... More
Supply &fixing Mild steel grill of approved design The cost including of necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete and as directed by the SIPCOT officers
1053.6
-
-
... More
UPVC WindowSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the SIPCOT Officer before use on work
50
-
-
... More
UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round theframes. The ventilator should be got approved from the SIPCOT Officer before use on work
3
-
-
... More
Supplying and fixing in position of colour Vitrified Floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of MM sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the SIPCOT officers. (Double Charged Vitrified Tiles 600 x 600 x 8mm)
458
-
-
... More
Self-leveling epoxy floor for 7 mm thicka) Surface Preparation:By any one of the suitable methods based on site conditions /availability.b) Primer Coat: Over the cleaned surface apply one coat of solvent less epoxyPrimer for a thickness of 100 to 150 microns for bonding epoxy flooring toConcrete surface. c) Epoxy underlay/screed (5.0 mm): Over the primed surface apply EpoxyMortar underlay to a thickness of 5 mm to cover the undulation orIrregularities in the floor to make it uniform. d) Primer Seal Coats (0.5 mm): Over the screed two coats of epoxy primer sealCoat to seal off the pores in the screed and also to act as an intermediate coatBetween screed & topcoat. e) Self leveling epoxy floor topping 1.5 mm): Over the Seal coats, applicationof around 1.5 mm thick three component epoxy-self leveling colored floorWith smooth and glossyfinish.(choice of colour-as specified by Engineer in charge)
745
-
-
... More
Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three M sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kgs. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
46
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
36
-
-
... More
Fine Polished Granite Slab Front Edge Nosing for Granite Slab
42
-
-
... More
Dadooing walls with following best approved quality, white colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two M sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kgs. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the SIPCOT officers. (Tile Size - 150mm X150mmX6mm)
36
-
-
... More
Weathering course with broken brick jelly lime concrete using 20mm gauge broken brick jelly in pure slaked lime ( no M sand) over roof slab to the proportion of brick jelly to lime ( Fat lime) being 32: 12 1/2 by volume well beaten with wooden beaters, for giving the required slope and thickness complying with relevant standard specification and as directed by the SIPCOT officers.
7
-
-
... More
Providing Polymer coating (Water Proof coating) for sunken portion of toilet with following specification and the surface shal be cleaned to remove all dust,foreign,matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry : Dry blend and polymer liquid shall be mixed into desired ratio as per recommandation of the supplier.The mix shall be stirred thoroughly until no bubbles remain in the mix.any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleanes surface.After drying,second coat shall be applied on the first coat as directed by the SIPCOT officers etc,The rate inclusive of cost of materials and labour,etc complete complying with standard specication and as directed by the SIPCOT officers
7
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
1284
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification
644
-
-
... More
Painting new iron work with two coats of approved I st class synthetic ready mixed enamel paint of approved quality, brand and shade over the existing priming coat. The paint should be supplied by the contractor at his own cost. (The quality and shade of the paint should be got approved from the Executive Engineer before use on works) etc. all complete complying with relevant standard specifications and as directed by the SIPCOT officers
53
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
40
-
-
... More
Supply & Installation of wood polymer Composite Panel of Size 2.900x0.156x0.021mm with epoxy primer coated MS tube insert to be anchored to the floor / ceiling through a base plate/wall bracket with necessary mechanical expansion anchors with necessary fixtures, including scaffolding charges. All complete complying with relevant standard specifications and as directed by the SIPCOT officers
768
-
-
... More
Providing and fixing Structural Glazing fabricated from roll framed sections made of Galvanized steel colour coated (Base steel as per IS 513 of 'D' Quality galvanized as per IS 277 with Zinc of 120 grams / Sqm) with total coated thickness of 0.72mm.The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel /powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint Specifications : Primer coat with epoxy primer of 5 -7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Polyurethane brackets should be used to connect horizontal section to vertical sections. Silicone : Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self - expanding cap and driving MS electro plated 80mm long screws into the caps through frames.Glass: 5mm reflective Saint Gobain OR equivalent.
280
-
-
... More
ELECTRICAL SUPPLY & ARRANGEMENT
-
-
-
... More
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & office, etc.) and as directed by SIPCOT Officers
99
-
-
... More
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour t and as directed by SIPCOT Officers
1800
-
-
... More
Supply and run of 2 of 2.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour and as directed by SIPCOT Officers
2000
-
-
... More
MODULAR SWITCHES & SOCKETS
-
-
-
... More
Supply and Fixing of 6A Switch 1W - 1 Module
90
-
-
... More
Supply and Fixing of 16A Switch 1W - 1 Module
25
-
-
... More
Supply and Fixing of Stepped Electronic 300W / 450W Square Type
FanRegulator
5
-
-
... More
Supply and Fixing of 6/16A Socket - 2 Module
25
-
-
... More
Supply and Fixing of 6A 5 pin Universal Socket - 2 Module
90
-
-
... More
FLUSH MOUNTING BOXES (GI)
-
-
-
... More
Supply and Fixing of Flush Box - 1/2 Module
10
-
-
... More
Supply and Fixing of Flush Box - 3 Module
30
-
-
... More
Supply and Fixing of Flush Box - 4 Module
5
-
-
... More
Supply and Fixing of Flush Box - 6 Module
20
-
-
... More
Supply and Fixing of Flush Box - 8 Module
10
-
-
... More
COMBINED PLATES (PLASTIC)
-
-
-
... More
Supply and Fixing of 1 Module Cover Plate
1
-
-
... More
Supply and Fixing of 2 Module Cover Plate
10
-
-
... More
Supply and Fixing of 3 Module Cover Plate
30
-
-
... More
Supply and Fixing of 4 Module Cover Plate
5
-
-
... More
Supply and Fixing of 6 Module Cover Plate
20
-
-
... More
Supply and Fixing of 8 Module Cover Plate
10
-
-
... More
Supply and fixing of 24A flush type wall socket with 25A DP MCB for AC Plug
17
-
-
... More
Supply and fixing of 100WATTS Highbay light
20
-
-
... More
Supply and fixing of 24W LED 4000K 2x2 Square type Recessed Fitting with LED
64
-
-
... More
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp etc., complete and as directed by SIPCOT Officers
7
-
-
... More
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall etc., complete and as directed by SIPCOT Officers.
10
-
-
... More
Supply and fixing of 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD
WITH MCB 6 way TPMCB sheet steeldistribution boards flush type / surface type fitted withbus bars and neutral links with single / three phase MCB outgoings and separate 6 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 6 ways in each segment) and separate provisions for MCB / Isolator (totally 18 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.
5
-
-
... More
MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTORCIRCUITS
-
-
-
... More
Supply and Fixing of Single Pole 6A to 32A, 10KA
106
-
-
... More
Supply and Fixing of Triple Pole & Neutral 63A, 10KA
5
-
-
... More
Supply and Fixing of 40 Amps 30 MA DP
15
-
-
... More
Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A) 8 Way, MCCB + 24 Modules
2
-
-
... More
Supply and Fixing of Triple Pole 32A, 10KA
16
-
-
... More
Supply and Fixing of 40 Amps 30MA DP
2
-
-
... More
SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 8 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm
2
-
-
... More
Supply and Fixing of 125A TP MCCB
2
-
-
... More
Fire Fighting Arrangement
-
-
-
... More
Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the SIPCOT Officers.
40
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officers.
6
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc, complete as per standard specification and as directed by the SIPCOT Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT
6
-
-
... More
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the SIPCOT Officers. Make: EXCELLENT / SAFETY / FIRST / EQUIVALENT
6
-
-
... More
Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the SIPCOT Officers.
6
-
-
... More
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE
1
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: KIARTAR / OMEX / EQUIVALENT.
1
-
-
... More
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
2
-
-
... More
Supply, erection, testing and commissioning of MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the SIPCOT Officers. Make: JINDAL / EQUIVALENT -
-
-
-
... More
Hydrant Pipe
-
-
-
... More
100mm Dia
126
-
-
... More
Sprinkler Pipe
-
-
-
... More
100mm Dia
128
-
-
... More
80mm Dia
110
-
-
... More
40mm Dia
208
-
-
... More
25mm Dia
167
-
-
... More
Supply, fixing, testing & commessioning of dial type (150mm) Glycerin filled pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no syphon, cost shall be inclusive for providing any short pieces, nipples, elbows etc all complete as per standard specification and directed by the SIPCOT officers
2
-
-
... More
Providing, fixing pipe supports 100mm dia from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification and directed by the SIPCOT officers.
30
-
-
... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE
GUARD / EQUIVALENT.
130
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: HGURU / ISI MAKE / EQUIVALENT.
3
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: KARTAR /
EQUIVALENT.
1
-
-
... More
Water Supply Arrangement
-
-
-
... More
Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. and as directed by SIPCOT Officers
-
-
-
... More
40mm PVC - 10kg/cm2 Pipes
91
-
-
... More
25 mm PVC - 10kg/cm2 Pipes
30
-
-
... More
Supplying and fixing the following dia PVC (SWR) pipe type B class conforming to IS 13592and relevant specials including packing the joints with rubber lubricant fixing them into walls with necessary GI Bolts and Nuts with special clamp made of MS angle/Flat including cutting, bending (excluding the cost of MS angle/flat) holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete complying with relevant standard specification and as directed by the SIPCOT officer
-
-
-
... More
Soil Pipe - (110mm Pipe 6kg/cm2)
157
-
-
... More
Wastewater Pipe - (110mm Pipe 6kg/cm2)
160
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. cand as directed by SIPCOT Officers..
-
-
-
... More
110 mm dia PVC- 4 kg/cm2 pipes
160
-
-
... More
Supply and fixing of GM Gate Valve 40mm Dia heavy type with necessary flanges, gaskets, nuts and bolts complete as required and shall be compatable with Composite pipes as applicable.etc., complete complying with relevant standard specification and as directed by the SIPCOT officer. The quality and brand Gate Valves is to be got approved by the Department officer before fixing
2
-
-
... More
Supplying and fixing of C.P 2Way Bip cock Long body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality and brand of fittings should be check before use).
10
-
-
... More
Supplying and fixing of C.P Bip cock Short body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality and brand of fittings should be check before use).
10
-
-
... More
Supplying and fixing of Stainless Steel Health faucet including cost of fittings labour for fixing etc, all complete and as directed by the SIPCOT officers., (The quality of fittings should be Check before use).
8
-
-
... More
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the SIPCOT officers. (The urinal should be got approved by the SIPCOT Officer before use on works.)
4
-
-
... More
Supply & fixing of PVC Prelaminated Board of 12-18mm thick for Toilet Partition etc complete complying with standard specification and as directed by the SIPCOT officers.
64
-
-
... More
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the SIPCOT officer before use on works)
8
-
-
... More
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the SIPCOT officers. (The wash hand basin and specials should be got approved by the SIPCOT officers before use on works).
10
-
-
... More
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of M sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the SIPCOT officers before use on works) (Cast Iron Nahani Trap of size 100 x 75mm with stainless steel gratings)
14
-
-
... More
supply and fixing of pvc water tank 5000 liter capacity with all accessories approved bt dept officers
2
-
-
... More
HVAC
-
-
-
... More
Manufacturing, Supplying and Fixing of 11TR floor mounted ductable centrilized Air conditioner, complete complying with standaard specifcication and as directed by the SIPCOT officers.
1
-
-
... More
PART- C (UG SUMP)
-
-
-
... More
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. - Earth work excavation for foundation in all soils and sub-soils
-
-
-
... More
0 to 2 m
40
-
-
... More
2 to 3m
32
-
-
... More
Supplying and filling in foundation and basement with Filling sand in layers of 100mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling M sand and as directed by the SIPCOT officers..
2
-
-
... More
Plain Cement concrete 1:4:8 (one cement, five M sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification.
2
-
-
... More
Rainforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers
26
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (Side Shuttering)
122
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
14
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers. (Interior Plastering)
102
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no M sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
13
-
-
... More
Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement Fe500 HYSD for all floors including cost of steel, binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT officers.
3.9
-
-
... More
Supplying & fixing SFRC MAN HOLE Cover of size 600x600mm etc complete complying with standard specification and as directed by the SIPCOT officers
2
-
-
... More
Supplying & fixing C I STEPS For sump etc complete complying with standard specification and as directed by the SIPCOT officers
20
-
-
... More
PART - D (COMPOUND WALL)
-
-
-
... More
Providing pile foundation 300mm dia augur pile for a depth to 3m depth including C.C- 2.4m. 1:2:4, using 20mm Hard Broken Stone jelly etc. all complete, excluding reinforcement.
606
-
-
... More
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.(including Refilling)
64
-
-
... More
Supplying and filling in foundation and basement with filling M sand in layers of 100mm thickness well watered rammed and consolidated complying with relevant standard specifications including cost of filling M sand and as directed by the SIPCOT officers..
12
-
-
... More
Plain Cement concrete 1:5:10 (one cement, five M sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification.
12
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (Side Shuttering)
755
-
-
... More
Brick work in cm 1:4 (one of cement and four of M sand) using chamber burnt second class ground moulded stock bricks of size 9”x4-3/8”x2-3/4” (23x11.2x7cm) for stair case steps including proper setting, scaffolding, curing etc., complete in all respects in all floors and as directed by the SIPCOT officers
266
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five P sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the SIPCOT officers.
2630
-
-
... More
Rainforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers
61
-
-
... More
Supplying, fabricating and placing in position of Mild Steel/ Ribbed Tor steel for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying and applying one coat of Cement Slurry etc., complete in all respects and as directed by the SIPCOT officers.
10.88
-
-
... More
Supplying and fixing Mild Steel grill as per the approved design including one coat of primer and labour for fixing in position etc. all complete. In all floors.
1190
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
2630
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
34
-
-
... More
Supplying and fixing GI DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanised iron pipes and flats and fixing them in position, etc., complete as per cl 2705 of MORT&H specification.
15
-
-
... More
PART- E ( ROAD AND PAVER AREA)
-
-
-
... More
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.(including Refilling)
-
-
-
... More
(a) 0-2m Depth
1836
-
-
... More
Supplying and filling in foundation, basement, etc with filling stone dust in layers of not more than 10 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT officers.
-
-
-
... More
Paver & Cement concrete Road
388
-
-
... More
Supplying and filling in foundation, basement, etc with Filling Granular Sub Base in layers of not more than 20 cm thick well watered, Without consolidation etc. complete complying with standard specification and as directed by the officers.
-
-
-
... More
Filling
547
-
-
... More
Providing and laying, Spreading and Compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the materials with water at mechanical mix plant carriage to mixed materials by tipper to site laying in uniform layers with paver in sub base/ base course on well prepared surface and cmpactory with vibratory roller to achieve the desired density complete as per clause 406 of MORTH specification
-
-
-
... More
Filling
425
-
-
... More
Plain Cement concrete 1:4:8 (one cement, five M sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification.
-
-
-
... More
Cement concrete Road and Drain & paver
106
-
-
... More
Construction of Dry Lean M-20 Concrete Sub- base using M-M sand over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing etc complete complying with standard specification and as directed by the SIPCOT officers.
-
-
-
... More
Cement concrete Road and Drain
274
-
-
... More
Construction of un-reinforced, Pavement Quality M-35 grade Concrete using M-M sand pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing etc complete complying with standard specification and as directed by the SIPCOT officers.
-
-
-
... More
concrete Road
567
-
-
... More
Supplying and laying Tamin Paver block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.
726
-
-
... More
Supplying erecting shuttering including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directedwith necessary supports for foundation with all cross bracing etc., complete in all respect complying with relevant standard specifications and as directed by the SIPCOT officers.
809
-
-
... More
Providing and laying in position, standardised concrete Mix M-25 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 k9. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of M sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
175
-
-
... More
Supplying and fixing of bitumen felt 15mm thick pad in cc pavement including cost of material and labour charges etc.,complete.with all respect complying with relevant standard specifications and as directed by the SIPCOT officers.
106
-
-
... More
Design supply and fixing of PVC Speed Breakers comes with high quality reflectors for night visibilty. PVC Speed Breaker (yellow+ black) sizes (500*400*50mm)no maintenance cost. Every piece gets fix with each other in the slot which helps in weight distribution. PVC Speed Breakers can be filled with concrete underneath for high strength durability etc complete complying with standard specification and as directed by the SIPCOT officers.
28
-
-
... More
Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 300mm x 100mm in Cement Concrete 1:2:4 (One cement, Two M sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three M sand) to full depth of slab etc., complete complying with standard specification and as directed by the SIPCOT officers
85
-
-
... More
Supply and fixing of SFRC Manhole cover of size 600mm x 600mm and including all fittings etc complete complying with standard specification and as directed by the SIPCOT officers.
20
-
-
... More
PART - F (CULVERT)
-
-
-
... More
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the SIPCOT officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.(including Refilling)
41.62
-
-
... More
Supplying and filling in foundation, basement, etc with filling Granular sub Base in layers of not more than 10 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the SIPCOT officers.
3
-
-
... More
Plain Cement concrete 1:5:10 (one cement, five M sand and ten aggregate) 100mm thick using 20mm metal for foundation and flooring using hard broken granite stone jelly including dewatering, shoring, strutting wherever necessary and curing etc. complete complying with standard specification.
4
-
-
... More
Rainforced Cement concrete 1:1 1/2:3 (One of cement, one and half of M sand and three of Hard broken stone jelly) for all RCC works namely Tee, Ell-rectangular beams, lintel, parapet cum drops, waist and landing slab, canophy, circular column, fin projections, sunshades, window boxing slab, loft and other similar works using 20mm gauge hard broken stone jelly excluding the cost and fabrication of reinforcement grills, shuttering and centering but including vibrating, laying, curing and finishing etc., complying with relevant standard specifications and as directed by the SIPCOT Officers Foundation & Basement
11.88
-
-
... More
Rainforced Cement Concrete 1:2:4 (One Cement, Two M sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the SIPCOT officers
1.17
-
-
... More
Providing form work For reinforced cement concrete works such as floor and roof slab,lintels ,beams staircase waist and landing slab and plane surfaces and other similar works.
65.1
-
-
... More
Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels for reinforcement for all floors including cost of binding wire, bending, tying etc, all complete complying with relevant standard specification and as directed by the SIPCOT officers.
1.96
-
-
... More
Plastering with Cement Mortar 1:5 ( One of cement and five of P M sand) 12mm thick finished with neat cement including, providing band cornice
30.59
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
30.59
-
-
... More
PART - G ( STREET LIGHT )
-
-
-
... More
Supply and erection of Tubular lamp, using 65 mm dia GI pipe 'B' class pipe with ISI mark of 6 mt length and 20 mm dia GI pipe 'B' class upto 2 mt with necessary reducer couplings and pipe firmly fixed with MS plate of 45 cm x 45 cm x 6 mm thick at the bottom and MS box with 8" x 6" with locking arrangements fixed with lamp post for providing looping in and loopin out connection to the street light fittings and supply and fixing of 15 Amps fuse unit and 15 Amps copper neautral link plate with brass bolts & nuts including concreting using C.C 1:2:4 using 20 mm HBSJ for 1.2 mt below Ground level and 0.3 mt above Ground level and a diameter of 45 cm with necessary earthing civil loop including labour charges for fixing the street light fittings. Earth work excavation, 2 coats of painting over 1 coat of Anti corrosion painting, welding inter connection using 1.5 sqmm copper cable etc., all complete and as directed by the SIPCOT officers.
50
-
-
... More
Supply and laying of 4 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of M sand and covering the cable completely with bricks and M sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers.
500
-
-
... More
Supply and laying of 4 x 10sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of M sand and covering the cable completely with bricks and M sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers.
500
-
-
... More
Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC LTUG armoures cable with earth connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers
100
-
-
... More
Supply and laying of 3.5 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt . Layer of M sand and covering the cable completely with bricks and M sand and refilling the earth to make good etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers.
170
-
-
... More
Supply and providing cable end termination of 3.5 x 25 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers.
8
-
-
... More
Supply and fixing of brass cable gland for 3.5 x 25 sqmm PVC armoured LTUG cable with earth connection etc.. all complete complying with relevant standard specifications & as directed by the SIPCOT officers.
50
-
-
... More
Supply and fixing of 4' 18 wts crystel glass Tubular LED lamp light with all respect
50
-
-
... More
PART-H ( ELECTRICAL - COMMON & SITE DEVELOPMENT)
-
-
-
... More
Supply and fixing of 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD
WITH MCB 6 way TPMCB sheet steeldistribution boards flush type / surface type fitted withbus bars and neutral links with single / three phase MCB outgoings and separate 6 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 6 ways in each segment) and separate provisions for MCB / Isolator (totally 18 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.
2
-
-
... More
MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTORCIRCUITS
-
-
-
... More
Single Pole 6A to 32A, 10KA
36
-
-
... More
Triple Pole & Neutral 63A, 10KA
2
-
-
... More
40 Amps 30 MA DP
6
-
-
... More
Earthing
-
-
-
... More
Supply and fixing Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated
earth as per the standard specification and as directed by the SIPCOT Officers
6
-
-
... More
Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work
19
-
-
... More
Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5 metre
330
-
-
... More
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
440
-
-
... More
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
60
-
-
... More
Supply and run of 50mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
50
-
-
... More
Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL
15
-
-
... More
Supply and fixing of GI steel tabular pole for 6 Metre Length Single Bracket Pole with Base Plate (250x250x6mm) 76.10mm ODx3.65mm Thick x 6000mm Length etc., complete and as directed by SIPCOT Officers.
40
-
-
... More
Supply and fixing of 60W LED Street Light Fitting with LED etc., complete and as directed by SIPCOT Officers.
55
-
-
... More
Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with earth connection
28
-
-
... More
Supply and fixing of brass cable gland for 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with earth connection
4
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with earth connection
2
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth connection
2
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with earth connection
6
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with earth connection
4
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with earth connection
14
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with earth connection
4
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 300 sq.mm. PVC LTUG aluminium armoured cable with earth connection
16
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 400 sq.mm. PVC LTUG aluminium armoured cable with earth connection
6
-
-
... More
Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
16
-
-
... More
Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
108
-
-
... More
Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
8
-
-
... More
Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
8
-
-
... More
Supply and providing cable end termination of 3-1/2 x 70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
24
-
-
... More
Supply and providing cable end termination of 3-1/2 x 95sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
56
-
-
... More
Supply and providing cable end termination of 3-1/2 x 150sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
16
-
-
... More
Supply and providing cable end termination of 3-1/2 x 120sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
16
-
-
... More
Supply and providing cable end termination of 3-1/2 x 300sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
64
-
-
... More
Supply and providing cable end termination of 3-1/2 x 400sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
24
-
-
... More
Supply and laying of 4C x 10 sq.mm.PVC LTUG Aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
60
-
-
... More
Supply and laying of 4C x 16 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
470
-
-
... More
Supply and laying of 3-1/2 x 25 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
30
-
-
... More
Supply and laying of 3-1/2 x 50 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
25
-
-
... More
Supply and laying of 3-1/2 x 70 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
90
-
-
... More
Supply and laying of 3-1/2 x95 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
200
-
-
... More
Supply and laying of 3-1/2 x150 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
40
-
-
... More
Supply and laying of 3-1/2 x120 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
70
-
-
... More
Supply and laying of 3-1/2 x300 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
440
-
-
... More
Supply and laying of 3-1/2 x400 sq.mm.PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of M sand and covering the cable completely with bricks and M sand and refilling the
70
-
-
... More
CABLE TRAY
-
-
-
... More
GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height
80
-
-
... More
GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height
60
-
-
... More
GI Hot Dip / Powder Coated 16 SWG Cable Tray with 450mm width and 50mm height
90
-
-
... More
Fabrication of MS Angle Support
1000
-
-
... More
11 KV OUTDOOR RING MAIN GEAR (RMG)
-
-
-
... More
11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear complete as per specification
1
-
-
... More
11 KV OUTDOOR VACCUM CIRCUIT BREAKER
-
-
-
... More
11 KV, 25 KA, 630 A, HT Outdoor Single Panel Vaccum Circuit Breaker complete as per specification
1
-
-
... More
HT CABLES
-
-
-
... More
300 sq.mm. 3 core HT XLPE 11KV € SISMV11E3 x 3002797
150
-
-
... More
CABLES, ACCESSORIES AND KITS -300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
8
-
-
... More
11KV/433V 1000KVA Outdoor Oil Type Transformer With OLTC Details : (Market rate) 11kV /433V 1000kVA, Dyn11, Three phase, ONAN,Transformer with +10% to -10% voltage variation in steps of 2.5 % through On Load Tap changer, control by RTCC panel. Impedance 5% Termination Incoming (Excluding cable termination kits, lugs and glands) Bottom Outgoing (Excluding cable termination kits, lugs and glands) Bottom
1
-
-
... More
LIGHTNING ROD
-
-
-
... More
Supply of Early Streamer Emission Air Terminal (ESEAT).Model: S The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere.
The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required ), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 µs.
The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is
avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ).
ESEAT Model : S - Radius of protection : 46 Metres Level of protection considered for the Project-II level 3 PHASE UPS (Three Phase In & Single Phase Out)-10 KVA
2
-
-
... More
MAIN MV PANEL -CABLE ENTRY: BOTTOM/TOP
-
-
-
... More
Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 1:
1600 Amps 4P EDO MP ACB of 50kA(Ics) withstanding capacity with Adjustable Overload, Short Circuit Relays -1 Set There shall be one set of Metering Compartment
incorporated with the following:- i) CTs of ratio 1600/5Amps of Class 1.0 and burden 15VA with CT short link terminal block for metering -
3 Nos.
ii) 1No Class 1.0, 96Sq.mm. Digital multi function meter with Inbuilt Selector Switch.
iii) CTs of ratio 1600/5Amps of Class 1.0 and burden 15VA with CT short link terminal block for APFC - 1 No.
iv) CTs of ratio 1600/5Amps of Class 5P10 and burden 15VA with CT short link terminal block for Earth Fault
Relay - 3 Nos.
v) 1 set of (2 OC+1 EF) Earth fault relay
vi) 1 Set of RYB & On, Off, Trip Indication lamp of LED cluster Type with Control breaker shall also be
provided.
1
-
-
... More
Incomer 2
800 Amps 4P ACB of 50kA(Ics) withstanding capacity with Adjustable Overload, Short Circuit Relays -2 Sets. There shall be one set of Metering Compartment incorporated with the following:-
i) CTs of ratio 800/5Amps of Class 1.0 and burden 15VA with CT short link terminal block for metering -
3 Nos. ii) 1No Class 1.0, 96Sq.mm. Digital multi function meter with Inbuilt Selector Switch.iii) 1 Set of RYB & On, Off, Trip Indication lamp of LED cluster Type with Control breaker shall also be
provided. Bus coupler -1 :
1600 Amps 4P EDO ACB of 50kA(Ics) withstanding capacity with Adjustable Overload, Short Circuit Relays -1 Set. Bus coupler -2 :
1600 Amps 4P EDO ACB of 50kA(Ics) withstanding capacity with Adjustable Overload, Short Circuit Relays -1 Set. Outgoings :Part - B
630 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set 400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short
Circuit Relays - 1 Set 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short
Circuit Relays - 1 Set 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short
Circuit Relays - 1 Set
-
-
-
... More
Outgoings :Part - C
400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short
Circuit Relays - 2 Set 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short
Circuit Relays - 1 Set NOTE: 01. The withstanding capacity shall be Ics only. 02. Electrical Interlocking arrangement and Auto operation should be provided between Incomer- 1(EB), Incomer-2&3(DG) & Bus coupler(BC)-1,2. Busbar : Aluminium Rating : 1600 Amps TPN 50Hz Provision made for Main Busbar Extension to be given both end of the MAIN MV PANEL for future extension. AUTOMATIC POWER FACTOR CORRECTION RELAY PANEL (APFCR PANEL)
-
-
-
... More
Supplying,erecting,connecting & commissioning of 300 KVAR APFCR Panel in MS CRCA sheet with free standing floor mounting enclosure with all necessary interconnections of capacitor Bank for 12-steps APFC relay shall be incorporated the following capacitors to maintain the power factor . INCOMER : 800 Amps TP+N MCCB of 35kA(Ics) withstanding capacity .. 01 No. with Adjustable overload and Fixed Short Circuit Relays There shall be one set of Metering Compartment incorporated with the following:-
1
-
-
... More
i) 3 Nos. of CTs ratio 800/5Amps of Class 1.0 for metering and burden 15VA with CT short link terminal block.
ii) 1No Class 1.0, 96Sq.mm. Digital MFM Meter with Inbuilt Selector Switch. iii) RYB Indication lamp of LED cluster Type with Control breaker shall also be provided. iv) Auto Manual Selector Switch v) 12 Stage APFCR Relay - 1 No. Outgoing 3Sets - 50kVAR Banks each comprising : 200A 25kA TP MCCB, with 50KVAR capacitor duty contactor, 50kVAR capacitor, On Off indicator and On
Off push button. 4Sets - 25kVAR Banks each comprising : 100A 25kA TP MCCB, with 25KVAR capacitor duty contactor, 25kVAR capacitor, On Off indicator and On
Off push button. 4Sets - 25kVAR Banks each comprising : 100A 25kA TP MCCB, with 25KVAR capacitor duty contactor, 25kVAR capacitor, On Off indicator and On
Off push button. 1Set - 15kVAR Banks each comprising : 63A 25kA TP MCCB, with 15KVAR capacitor duty contactor, 15kVAR capacitor, On Off indicator and On
Off push button. 3Set - 10kVAR Banks each comprising : 40A 25kA TP MCCB, with 10KVAR capacitor duty contactor, 10kVAR capacitor, On Off indicator and On
Off push button. 1Set - 5kVAR Banks each comprising : 25A 25kA TP MCCB, with 5KVAR capacitor duty contactor, 5kVAR capacitor, On Off indicator and On
Off push button. Busbar 1Set - 800A TPN Aluminium bus bars, interconnections with color coded heat shrinkable sleeves and SMC Bus bar supports.
-
-
-
... More
SUB SWITCH BOARD 1Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 800 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 SetOutgoing 400 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 1Nos 250 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos 125 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nos 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos
1
-
-
... More
SUB SWITCH BOARD 2 Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 SetOutgoing 160 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos 250 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2No 125 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nos 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 2Nos
1
-
-
... More
SUB SWITCH BOARD 3 Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 400 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 250 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 1Nos 125 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nos 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 4Nos
1
-
-
... More
POWER SWITCH BOARD 1 Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 125 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 7Nos
1
-
-
... More
MLSB Supplying, Erecting, connecting & commissioning of a made up of sheet steel, dust and vermin proof of Cubicle type, Indoor type, floor mounting, free standing, Compartmentalized design and fabricated with 14 CRCA sheet steel for main frames, and 16 CRCA sheet steel Doors & partitions and removable of Gland plates. The Panel Board shall be incorporated with the following:- Incomer 250 Amps TPN MCCB of 35kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short Circuit Relays - 1 Set Outgoing 63 Amps TPN MCCB of 25kA(Ics) withstanding capacity with FOD, Adjustable Overload, Fixed Short - 6Nos
1
-
-
... More
Supply and fixing of 1600A TPN Aluminium LT Busduct from Transformer to MV panel
15
-
-
... More
Suppy and fixing of 1600A Alu Flex Joint
2
-
-
... More
Supply and installation of 5KVA UPS with battery bank 1 hour backup
2
-
-
... More
Supply and installation of 3KVA Inverter with battery bank 1 hour backup-ups
2
-
-
... More
SAFETY ACCESSORIES
-
-
-
... More
AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories
1
-
-
... More
2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS - 5Nos
1
-
-
... More
First Aid Box complete with all First Aid Medicines
1
-
-
... More
Shock Treatment Chart fixed in glass frame
1
-
-
... More
4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle
1
-
-
... More
Hand Gloves 11KV Grade
1
-
-
... More
Danger Board as required by the Electrical Authorities
1
-
-
... More
Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms
1
-
-
... More
Earth Discharge Rod
1
-
-
... More
Supply of 250KVA, ( 6SL1500TA G3) KOEL GREEN GENSET incorporating Kirloskar Water Cooled Diesel Engine, Kirloskar Green alternator, 3 phase, 415 Volts, 0.8 PF, Standard control panal CPCB II approved Acoustic Enclosure, Battery & Diesel Tank ( Generator Used for Producing electricity)Techincal specification enclosed including Liasioning with electrical inspector for preparation of drawing such as schmatic layout , earthing layout etc., submission of drawing to electrical inspector (chennai south) and getting drawing approval. Preparation of work completion report and arranging EI inspection . Preparation of defect report after inspection and obtaining safety certificate. etc complete complying with standard specification and as directed by the SIPCOT officers
2
-
-
... More
Manufacturing, Supplying and Fixing of Automatic Grade Boom Barrier of 50Hz frequency,220V Voltage , 120W Power,Single Phase,Working Temperature 35deg C-75deg C,Motor Rotational Speed 1400 RPM etc complete comlying with standaard specifcication and as directed by the SIPCOT officers.
2
-
-
... More
Supply and Fixing of 40 Watt Ceiling Mounted FOS 2x2 LED Panel Lights are elegant in design and integrate seamlessly with your white ceilings. Made using Edge-Lit LED Lighting technology, FOS 2x2 Ceiling LED Panel Lights have the slimmest profile of just 10.5 mm thereby, offering better lighting performance and appearance than back-lit LED Panels.
100
-
-
... More
PART - I (Fire Fighting Arrangement-Common & Site Development)
-
-
-
... More
Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fizing and incidental charges etc., complete as per standard specification and as directed by the SIPCOT Officers. (Make:Kirloskar / Equivalent)
1
-
-
... More
Supply, erection, testing and commissioning of MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard by the SIPCOT Officers. Make: JINDAL / EQUIVALENT -
-
-
-
... More
Hydrant Pipe
-
-
-
... More
150mm Dia
230
-
-
... More
Sprinkler
-
-
-
... More
100mm Dia
40
-
-
... More
Hydrant PipeSupply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’,gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers. Make: NORMEX / KARTAR /EQUIVALENT
-
-
-
... More
200mm Dia
3
-
-
... More
100mm Dia
1
-
-
... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor
including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers.
-
-
-
... More
200mm Dia
1
-
-
... More
150mm Dia
5
-
-
... More
Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,
complete as per standard specification and as directed by the SIPCOT Officers. Make: LEADER / EQUIVALENT. (PWD _ SOR =Item no - 360)
3
-
-
... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Butterfly Valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor
including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIPCOT Officers.
-
-
-
... More
150mm Dia
5
-
-
... More
100mm Dia
4
-
-
... More
Supply erection testing and commissioning of Electric Motor Driven Fire Pumpset suitable for automatic operation and consisting of following:
a. 1 No. horizontal split casing centrifugal type fire pump
capable of delivering 4550 LPM against a total head of 110
metres, so as to ensure a minimum pressure of 3.5 kg. per
sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel.
b. 1 No. squirrel cage induction motor of 175 HP, 415 Volt, 3 phase 50Hz rating, conforming to IS:325-1978 with class "F" insulation, totally enclosed, IP 55 for enclosure fan cooled type conforming to relevant protection clause of IS 4691, synchronous speed of 2900 RPM.
c. Common bed plate fabricated with MS channel / cast iron type for assembling the pump and motor flexible coupling between the pump and the motor with coupling guard for protection - 1 No.
d. Making cement concrete foundation suitable for the above pumpset including vibration isolation pads as necessary, foundation bolts, brackets, clamp fixtures, grouting, etc., in
accordance with the manufacturer's design and as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard Specification and as directed by the SIPCOT Officers.
2
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for
automatic operation and consisting of followings complete in all respects as required.
a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against a total head of 70 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel.
b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete.
c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc.
d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc.
2
-
-
... More
PART - J (Water Supply Arrangement - Common & Site Development)
-
-
-
... More
Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in SFRC cover slab of size 300 x 300mm over using 40mm size brick jelly and brick masonry wall 115 mm thick using fly ash bricks of size 23x11x7cm in cm 1:5 (One of cement and five of M sand ) plastered with CM 1:3 (One of cement and three of M sand) 12mm thick Including fixing cover slab fixing in position curing finishing etc., All complete complying with relevant standard specification and as directed by the SIPCOT officer.
8
-
-
... More
Construction of Inspection chamber of following sizes with brick jelly concrete 1:8:16 ( one of cement eight of M sand and sixteen of broken brick jelly using 40mm gauge broken brickjelly 15cm thick for foundation and 23cm thick brick masonry in C.M. 1:5 ( One of cement and five of M sand) using fly ash bricks of size 230mm x110mm x70mm, plastering with cement mortar 1:3 ( One of cement and three of M sand) 12mm thick on both sides top and bottom including earth work excavation RCC 1:2:4 ( One of cement two of M sand and four of 20mm gauge hard broken stone) Including SFRC Cover Heavy duty collor with slab of required size fixing in position curing finishing etc., complete complying with relevant standard specification and as directed by the SIPCOT officer. (Inspection 0.60x0.60m (inside opening))
10
-
-
... More
Supply and fixing 2HP summersible pump set asper isi specification with isi mark hydurallically testing and commisioning of submersible wet type suitable for sump with pressure gauge and necessary length of 2 nos of pp from pumpset to the top of the sump and other required accessories etc complete in all respect and as directed by the SIPCOT officers, the motor and the pumpset supplied should satisfied the following duty conditions etc complete complying with standard specification and as directed by the SIPCOT officers.
4
-
-
... More
Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)
1
-
-
... More
Added GST of 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements