State Industries Promotion Corporation Of Tamil Nadu Limited Tender

Providing foundation arrangements to the street light poles as per following specifications.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B for culvert and drain complete complying with standard specification and as directed by SIPCOT Officers. (Narrow cutting)

Supplying and filling in foundation with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc., Complete complying with standard specification and as directed by SIPCOT officers.

Providing and laying plain cement concrete mix 1:4:8 (One cement, four M.sand and Eight aggregates) for foundation using 40mm ISS size HBG stone jelly for foundation including cost and conveyance of all materials to site dewatering if found necessary and laid in layers of not more than 15cm thick well rammed consolidated and curing etc., complete complying with Standard specification and as directed by SIPCOT Officers.

Reinforced cement concrete 1:11/2:3 (One Cement, One and Half M.Sand and Three Jelly) for pedestal concrete suing Machine Crushed 20mm size Hard Broken granites ISS stone Jelly for all "Reinforced Cement Concrete Works" including cost and conveyance of all materials and labour to work site excluding cost of centeringm, shuttering, strutting and cost of MS / RTS Reinforcement grills placed in position but including machine mixing concrete, laying, vibrating with mechanical vibrators, finishing, curing, including cost oof soft potaable water treatment of bearing, smooth with cement mortor 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claim for extra and all labour charges for mixing concete, laying, curing, vibrating charges, hire charges for all tools and plants and all other incidental charges etc., complete complying with Standard specification as directed by SIPCOT Officers. ( for Pedestal Concrete)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at above 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by SIPCOT Officers

Supplying, fabricating and placing in position steel reinforcement grills using M.S./ R.T.S. rods of all sizes of reinforcement for arr Reinforced Cement Concrete works (for pedestal concrete) including cost and conveyance of steel, binding wire, spacer bars, cover blocks, labour charges for unbending of rodsk, straightening, cutting, fabricating, tying, lifting, placing in position, overlapping to the required length whereever necessary cover blocks and all other incidental charges etc.,complete complying with standard specification and as directed by SIPCOT Officers.

Fabrication, supply, instalation of out -door street lighting distribution pillar box of size 1250x900x300 mm made out of 16 SWG sheet steel metal incorporated with 1No. 100amps TNP rewirable fuse switch and 32A 4 way fuse DB provided with 63A capacitor copper bus bars for fuses and 1 No. 63Amps Tp contactor with 230V coil and 1No 24hrs. Timer of L&T make with its control wiring , power interconnection with 7/16 copper wire from main switch to contactor and contactor to fuse DB. the pillar fabricated with front double door arrangements with one coat of primer and 2 coats of aluminium finish. the pillar to be erected with suitable angle iron frame pedestal with concrete grouting etc., complete complying with standard specification and as directed by SIPCOT officers

Fabrication, supply and installation of TNEB service connection feeder pillar box of size 900x900x300 mm outdoor type made out of 16SWG MS sheet steel with lockable door, provisional for TNEB sealing with 1No. Teak wood plank fitted inside thepillar with 3 Nos. 200A porcelain fuse cut outs with 1No. copper earth link and neutral link and space for fixing TNEB energy meter. the pillar painted with one coat of red oxide and 2 coats of alumnium finish as required by TNEB iron frame pedestal with concrete grouting etc., complete complying with standard specification and as directed by SIPCOT officers.

Supplying and laying of the following PVC armoured LTUG cable with ISI mark in a trench to be excavated/ in the median / foot path portion at a depth of 0.90m and routing the cable into the HDPE pipe laid completely and refilling the earth to make good and as per standard specification. The price shall be inclusive of all end termination,aluminium conductor, jointing as required at the site with necessary jointing materials, charges for transportation, stretching and laying of the cable etc., complete. Necessary cable brackets shall also be taken into account for the cables to be brought into the feeder pillars and lighting cubicle as per ISI 1554 (Pt.I) etc., complete copying with standard specification and as directed by the SIPCOT Officers

3 1/2 x 70sq.mm UG cable

4 core x 16sq.mm UG cable

Supplying and fixing of the following UG cable gland with supplied cable fixing in the MS switch board of the pole and pillar BOT main etc., complete copying with standard specification and as directed by the SIPCOT Officers

3 1/2 x 70sq.mm UG cable

4 core x 16sq.mm UG cable

Supply, laying and testing of 3 core x 1.50 sq.mm PVC insulated SC unsheathed Cu.cable conductor cable of 1100 V grade with necessary jointing materials etc., complete including cost and conveyance of cable and labour charges for laying the cable etc., complete complying with appropriate specification / standards and as directed by SIPCOT Officers.

Earthing as per PWD standard with an electrode of 2 metre class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work and as directed by SIPCOT Officers.

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%