State Industries Promotion Corporation Of Tamil Nadu Limited Tender

Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by SIPCOT Board officers.

Supply and delivery of 200 mm dia UN PLASTICIZED O- PVC PIPE FOR PORTABLE WATER SUPPLY AS PER IS 16647/2017 etc., complete complying with standard specifications and as directed by SIPCOT Officers. For PN 12.5 CLASS 500 Pipes.

Supply and delivery of 65 mm dia G.I PIPES (medium) as per IS 1239/PART I/2004 etc complete complying with standard specifications and as directed by SIPCOT Officers.

Supply and delivery of UN PLASTICIZED O- PVC SPECIALS FOR PORTABLE WATER SUPPLY AS PER IS 16647/2017 such as bends, couplers, elbows, Tees, flanged tail pieces, threaded adopters and Tail piece without flanges etc complete complying with standard specifications and as directed by SIPCOT Officers.

200mm dia 90 Degree bend

200mm dia 45 Degree bend

200mm x 200mm x200mm Equal Tee

200mm x 200mm x 50mm Air Tee

200mm Sliding coupler

200 mm Flanged socket

Supply and delivery of 65 mm dia G.I specials etc complete complying with standard specifications and as directed by SIPCOT Officers.

G.I Coupling

G.I Flange Set

G.I Union

G.I Bend

G.I Elbow

Lowering 200mm dia O- PVC pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste etc complete complying with standard specifications and as directed by SIPCOT Officers.

Lowering 65mm dia GI pipes and specials in the trenches and laying to proper grade and alignment, jointing with GI Specials etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Testing of following O-P.V.C. pipes/G.I pipes for water supply with hydraulic testing equipment by filling with water (including cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc, complete complying with standard specifications and as directed by SIPCOT Officers.

200mm dia pipe

65mm dia pipe

Supply, delivery and fixing of 200mm dia CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 wih ISI marking and 5 years warranty including necessary pipies, specials and other jointing materials etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Supply, delivery and fixing of following size of G.M gate / Non return valves as per I.S B.S 5154 & related I.S specifications including necessary pipies, specials and other jointing materials etc, complete complying with standard specifications and as directed by SIPCOT Officers.

65mm dia G.M gate valve

65mm dia non-return valve

Supply, delivery and fixing of 50mm dia C.I. double air valve as per ISI 14845/2000 5 years warranty of approved quality including necessary pipies, specials and other jointing materials etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorriosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide and isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished.

200mm dia

Construction of Masonary valve chamber of size 1.2m x 0.9m x 1.8m as per TWAD type design for 200mm dia Sluice valves / Air Valve including fixing the Valves , earthwork excavation for foundation, filling of stone dust, P.C.C 1:2:4 using 20mm HBG jelly, brickwork in C.M1:5 for side wall, plastering C.M 1:3, 12mm thick, R.C.C M20 grade concrete, centering, steel fabrication, supplying and fixing C.I manhole cover with C.I frames ( Heavy duty ) of size 60cm x 60cm, charges for fixing surface box , valves and specials fixing in position, refilling the sides of the pit and all other labour charges etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Construction of Masonary valve chamber of size 1.2m x 0.9m x 1.8m as per TWAD type design for 200mm dia Flow meter including fixing the meter, earthwork excavation for foundation, filling of stone dust, P.C.C 1:2:4 using 20mm HBG jelly, brickwork in C.M1:5 for side wall, plastering C.M 1:3, 12mm thick, R.C.C M20 grade concrete, centering, steel fabrication, supplying and fixing C.I manhole cover with C.I frames (Heavy duty ) of size 60cm x 60cm, flow meter and specials fixing in position, refilling the sides of the pit and all other labour charges etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Construction of thrust block for 200mm dia 90 degree bend including earthwork excavation for foundation, filling of stone dust, P.C.C 1:2:4 using 20mm HBG jelly, , R.C.C M20 grade concrete, centering, steel fabrication etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Part B Pumping Equipments

Supply and delivery of Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Duty is 125 lpm x 50 m head

Duty is 125 lpm x 40m head

Supply and delivery of D O L Starter Confirming to IS 13497,IEC60947 Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately) etc, complete complying with standard specifications and as directed by SIPCOT Officers.

Suitable for 3HP Motor

Supply and delivery of 150 mm dia. Pressure gauge and Vaccum guage suitable for above pumpsets including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) required sprcials and ringstop levelcock etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing mersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Supply, delivery, erection, testing and commiossioning of SWITCH DISCONNECTOR FUSE UNITS IN SHEET STEEL ENCLOSURE (SDF) 63 amps TPN Switch disconnector fuse units in sheet steel enclosure with HRC Fuses double break etc., complete complying with standard specifications and as directed by SIPCOT Officers.

Supply, delivery of following size of 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING etc., complete complying with standard specifications and as directed by SIPCOT Officers.

3.5 core x 50 Sq.mm.(From DOL STARTER to to each OPEN WELL motor)

Labour charges for laying the following sizes of cables in the trenches from EB supply to kiosk board through LT metering as per IE rules etc., complete complying with standard specifications and as directed by SIPCOT Officers.

3.5 core x 50 Sq.mm. (From M V Panel to each motor connections - pump room)

Labour charges for Jointing the following sizes of UG cable including cost of jointing materials etc., complete complying with standard specifications and as directed by SIPCOT Officers.

3.5 core x 50 Sq.mm. (From M V Panel to to each motor connections - pump room)

Supply, delivery and fixing in position of following Mixed DI-Electric Capacitor With TNEB Test Certificate with accessories including banking conforming to IS 2834 suitable for 415 v - 3 phase, 50Hz, AC supply etc complete complying with standard specifications and as directed by SIPCOT Officers.

For Each pumpset- 1 no

Supply and fixing of G.I. earthing system comprising of 50mm dia and 2m long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp for 3HP etc complete complying with standard specifications and as directed by SIPCOT Officers.

For Pump room pumpsets 3HP

Supply and delivery of following safety appliances including all taxes, duties and handling charges etc complete complying with standard specifications and as directed by SIPCOT Officers.

Electrical gloves tested to 11 KV/22 KV with wooden box with French chalk powder.

Electrical quality 6 mm thick rubber mat

5 Kg capacity ISI marked Dry chemical powder fire extinguisher

Fire buckets – 3 Nos. Hooked to MS stand

Laminated shock ttreatment chart

Wooden First Aid Box

Rechargeable Emergency lamp( 600mm fluorescent lamp)

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc complete complying with standard specifications and as directed by SIPCOT Officers.

Supply,Delivery and Fixing LT/LTCT METERING BOX as per IE rules and TANGEDCO norms Up to 50HP/37 KW (which includes LT meter panel board, 6 Nos. suitable fuse carriers) etc complete complying with standard specifications and as directed by SIPCOT Officers.

Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)

Added GST of 18%