State Industries Promotion Corporation Of Tamil Nadu Limited Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
State Industries Promotion Corporation Of Tamil Nadu Limited - SIPCOT Tender
Civil And Construction
Building Construction
Education And Training Services
Eprocure
Opening Date20 Jan 2024
Closing Date30 Jan 2024
Tender Amount₹ 34,64,00,000
Costs
EMD
₹ 17,42,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SIPCT_406419_2Bid Award Id
ViewTender No
NIT.No.47/CD/T.No.47/2023-24Tender Authority
State Industries Promotion Corporation Of Tamil Nadu Limited ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and fabrication of Anchoring Rod for footing using 20mm dia rod including cost and conveyence of all material and all labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
23500
-
-
... More
Providing and fixing 50 x 50 x 2.5mm weld mesh and nailing 16mm dia rod to side of the earth up to 3m deep @ 500mm c/c in both direction and tie & weld with 8mm rod including guniting the weld mesh surface with CM 1:3:2 at an average thickness of 60-70mm using 6mm to 10mm aggregate,weep holes provide before shotcreting with 50mm dia. slotted hole PVC pipes the rate inclusive of all machineries, tools & tackle, labour, requried compaction etc.complete complying with standard specifications and as directed by SIPCOT Officers.Note: Provision of weep holes is based on site condition & wherever required.
700
-
-
... More
Earth work excavation for foundation in all soils and sub soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers well watered rammed and consolidated and depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified here under etc.complete complying with standard specifications and as directed by SIPCOT Officers. (without Refilling)
55
-
-
... More
Supply and filling of Gravel including all cost and conveyance of materials and all labour charges, wall rammed etc.complete complying with standard specifications and as directed by SIPCOT Officers.
2040
-
-
... More
Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.
89
-
-
... More
Supply and filling in foundation and basement with earth in layers of 150mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of earth. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1065
-
-
... More
Supply and filling of stone dust in layer of not more than 15cm thick well watered, rammed and consolidated including all cost and conveyance of materials and all labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
730
-
-
... More
Plain Cement Concrete 1:3:6 (One of cement,three of M sand and Six of hard broken stone jelly) for foundation using 40mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc.complete complying with standard specifications and as directed by SIPCOT Officers. For Footing,Plinth beam & truss
169
-
-
... More
Plain Cement Concrete 1:5:10 (One of cement, five of M Sand and ten of hard broken stone jelly) for foundation using 40mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. For Plinth beam
228
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-35 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 425 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.complete complying with standard specifications and as directed by SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the SIPCOT for the excess usage of materials).
-
-
-
... More
Footing Foundation belowNGL
834
-
-
... More
Foundation and basement above NGL
317
-
-
... More
Lower Ground Level column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
1011
-
-
... More
Ground floor column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
801
-
-
... More
First Floor column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
761
-
-
... More
Second Floor column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
791
-
-
... More
Third Floor Terrace column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
9
-
-
... More
Fourth Floor OHT water tank and Fire fighting water tank Terrace column upto roof beam bottom, beam lintel staircase and pt,conventional slab etc.
35
-
-
... More
Vacuum Dewatered Flooring (VDF)-Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc. The Rate is inclusive of Providing vacuum de-watered flooring operation consisting of Vibrating the concrete by using screed vibrator, de-watering using vacuum pumps by suction method and finishing the top surface to required level and grade using skim floaters/discs/power trowels and providing fixtures wherever necessary without claiming extra, etc.complete complying with standard specifications and as directed by SIPCOT Officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No seperate payment will be made by the SIPCOT for the excess usage of materials).
311
-
-
... More
Brick work in cm 1:5 (One of cement and five of M sand) using Ground Moulded chamber burnt bricks of size 23x11.4x7.5 cm in foundation and basement including dewatering wherever necessary proper setting, curing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Footing and foundation bsement
73
-
-
... More
Above basement
8
-
-
... More
Brick work in cm 1:6 (One of cement and Six of M sand) using Ground Moulded chamber burnt bricks of size Bricks of size 23x11.4x7.5 cm in super structure including dewatering wherever necessary proper setting, curingetc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Below GL
435
-
-
... More
For Superstructure - Ground floor
519
-
-
... More
In First floor
508
-
-
... More
In Second floor
301
-
-
... More
Terrace floor
67
-
-
... More
Brick partition wall in Cement Mortar 1:4 (One of cement and four of M sand) 114mm thick for super structure in the following floors using Ground Moulded chamber burnt bricks of size Bricks of size 23x11.4x7.5 cm including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Lower GF
61
-
-
... More
Ground floor
41
-
-
... More
In first floor
41
-
-
... More
In Second floor
41
-
-
... More
Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cmx60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre supported by caurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the RCC works etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Upto Ground floor
-
-
-
... More
For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
2862
-
-
... More
Plain surfaces
17040
-
-
... More
Square column
5962
-
-
... More
Vertical walls
2823
-
-
... More
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc.complete complying with standard specifications and as directed by SIPCOT Officers.For workshop Truss column
-
-
-
... More
3.30m to 4.30m
144
-
-
... More
4.30m to 5.30m
144
-
-
... More
5.30m to 6.30m
144
-
-
... More
6.30m to 7.30m
144
-
-
... More
Providing Expansion joint bitumen filler pad 20 mm thick including cost and conveyence of all material and all labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
445
-
-
... More
Supplying, fabricating and placing in position of Ribbed Tor Steels for reinforcement for all floors including cost of binding wire, bending, tying etc.complete complying with standard specifications and as directed by SIPCOT Officers. for all sizes.
731
-
-
... More
POST TENSIONING WORKS : Design and Execution, of post tensioning works, including, decoiling the strands, cutting to the required lengths, supplying laying of HT strands sheathing (GI corrugated ducts 0.3mm thick) jointing with couplers, and inserting the strands, profiling, fixing live end anchorages, including the supply of stressing anchorages, suitable for 5-5 & 5-4 tendons, grout vents, making dead end anchorages, including flowering the strands, fixing tendon support bars, supervising the fixing of anti-bursting reinforcement, stressing the cables, end trimming, grouting the cables, with cement slurry, mixed with admixtures , with required tools, plants, and machineries, and consumables etc. (shuttering, concreting & reinforcement steel, shall be paid under respective items) at all heights including all leads, lifts, coordination, with the post-tensioning agency, preparation of drawings, obtaining approval from the Employer / Architect etc. Rate to include providing water, power, cement and admixture for grouting, packing of sheathing and anchorages blockings, filling of recess pockets after stressing using grouts(cement slurry mixed with approved admixtures) including providing access to post tensioning at all heights including all leads, lifts etc., all complete and as approved and as directed by the SIPCOT but excluding shuttering, concreting & reinforcement steel which shall be payable under respective items separately.
18.6
-
-
... More
Paving the floor with best approved quality fine polished Kota stone slabs of size above 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by SIPCOT Officer concerned before use on work,etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1612
-
-
... More
Dadooing walls with best approved quality, white / colour glazed tiles of following sizes (300mmx450mmx8mm)set in Cement Mortar 1:2 (One Cement and Two M sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
480
-
-
... More
Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm in CM 1:3 (One Cement and three M sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with grout (Tile joint filler) curing, finishing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
8250
-
-
... More
Supplying and fixing of colour design ceramic tiles 305 *305*6mm (Anti skid without corrugated design for flooring and other similar works (best approved quality colour and shade shall be got approved from SIPCOT Officer before using) over cement 1:3 (one cement and three of sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary, pointing the joints with grout (Tile joint filler) curing, finishingetc.complete complying with standard specifications and as directed by SIPCOT Officers.
391
-
-
... More
Supplying and fixing of white glazed tiles (best approved quality and the same shall be got approved fromSIPCOT Officer before using) over cement plastering in CM 1:2 (one of cement and two of sand) 10mm thick including fixing in position, cutting the tiles to the reqauired size wherever necessary, pointing the joints with Grout (Tile joint filler), curing, finishing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1088
-
-
... More
Supplying and laying Interlocking paver block 83mm tk 50% of Terracotta colour paper 50% of gray colour paver block with M30 grade cement concrete using 6mm chips including levelling the base preparation of sub base, laying out the paver, cut the places to fit the edge, vibrating the pavers and sweeping the sand (grouting) and transportaion chrges loading and unloading charges, all taxes and laying chargesetc.complete complying with standard specifications and as directed by SIPCOT Officers.
441
-
-
... More
Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc.complete complying with standard specifications and as directed by SIPCOT Officers.
59
-
-
... More
Supplying and laying of granite tile 10mm thick. (600 x 300mm) in CM 1:3, 20mm thick including fixing in position, cutting to the required size wherever necessary, pointing the joints with grout (Tile joint filler) curing, finishing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
90
-
-
... More
Providing Grooving for granite step slab area including cost of all labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1324
-
-
... More
Supplying and fixing in position with best quality Fine Polished "GRANITE SLABS" of size 18- 20 mm thick Ruby red with machine cut edges laid true to line in both directions with minimum possible width of joints in cement mortar 1:3 (One cement and three sand) 20mm thick and pointing the joints to full depth of Granite slabs neatly with white cement mixed with matching colour best quality colouring pigments etc.complete complying with standard specifications and as directed by SIPCOT Officers.
815
-
-
... More
Providing Single Nosing for wash basin and stair case steps granite slab area including cost of all labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
730
-
-
... More
Supplying and laying of Urinal divider of size 350x675x130mm including cost and conveyance of material and all labour chargesetc.complete complying with standard specifications and as directed by SIPCOT Officers.
31
-
-
... More
Finishing the top of Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles of size 300mmx300mmx8mm thick of approved quality laid in cement mortor 1:3 (one part of cement and three parts of M sand) over base concrete mixed with calcium based mineral powder (60 kg for 1000 sqft) (before laying tiles, the tiles should be dipped with salin based nano liquid) and top Grouting with cement mortar 1:3 (one part of cement and three parts of M sand) mixed with white cement, silicon powder and polimer additives (20kg for 1000 sqft.) and joint pointed with zycosil oil (200gm for 1000 sqft.) after grouting acrylic salin based liquid including cost of base concrete 1:2:4 mix using 6-10mm chips - 40mm thick etc., complete complying with standard specifications including cost of all materials, labour charges for lifting to open terrace, laying and finishing and other incidental charges etc., complete and as directed by the SIPCOT officers. (The Brand and quality of tiles should be got approved from the SIPCOT officer before using).
2691
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and five M.sand), 12mm thick in all floors including curing band,ceiling scaffolding etc.complete complying with standard specifications and as directed by SIPCOT Officers.
22425
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
9440
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Interior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc.complete complying with standard specifications and as directed by SIPCOT Officers.
14045
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc.complete complying with standard specifications and as directed by SIPCOT Officers.
8380
-
-
... More
White washing two coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete etc.complete complying with standard specifications and as directed by SIPCOT Officers. - Ground floor, First floor, Second floor
9440
-
-
... More
Painting the new Iron work rolling shutter ,grills and other similar works such as PVC /ASTM Pipes, Kerb Stone and with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. (The quality and the brand of paint should be got approved by SIPCOT Officer before use) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
281
-
-
... More
Supply, Fabrication & Erection of Steel Structural Truss, Purlin, base plate, top plate, Joining plate with necessary fasteners with full finishing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Framing plan and Truss and fixing angle for Ground floor area
62200
-
-
... More
Supply and fixing of steel Structural Truss work for Multipurpose hall including painting works
8110
-
-
... More
Supply and Fixing of colour coated galvalume 50mm thick puff panel roofing sheet. Top 0.5 mm thick bottom 0.4 mm thick in between 50mm polyurethane with SDS screws with full finishing etc., complete complying with standard specifications and as directed by SIPCOT Officers
2388
-
-
... More
Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of Sisoli Serene / Slate Spirts / Slate Polka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595 x 15mm having volume density 270 kgs / m3, weight 4kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. The skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally skelet CT15 W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15 W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. Sisoli Serene / Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. The systems to achieve noise reduction coefficient not less than 0.5 NRC, so as to have an neat appearance as directed by the SIPCOT offices. The cost includes, cost of material, cost of labour, Scaffolding, transportation, conveyance, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
461
-
-
... More
Water supply arrangements
-
-
-
... More
Supplying and fixing of half turn C.P Long body Tap of 15mm dia of Best quality including cost of half turn CP tap with required specials and labour for fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers. (The quality and brand should be got approved from SIPCOT before use).
90
-
-
... More
Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992 Type 'A' for Rainwater Down fall pipe with relevant specials such as gratings, shoes, bends, offsets confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion with necessary clamps, teak wood plugs etc., of approved quality and including fixing CI gratings at the junction of parapet and floor or roof slab etc., including finishing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
261
-
-
... More
ALUMINIUM SLIDING window Supplying, fabrication and fixing in position of anodised Aluminium powder coating any color finishing sliding Window 3 track all the theee shutters with sliding arrangement the bottam section should have gutter arrengement so as to drain the water entering and made with extruded aluminium section for outer frame as directed with necessary accessories such as rubber beeding and clips,best quality rubber beeding ,handle,stoppers and fixing 4mm thick clear sheet glass including all required fitting including fabrication etc. complete.Necessary dismanfling making holies in RCC Columns.beams,masonary wherever necessary with power dril to the extent required and made good the original conditions after fixing as directed by departmental officers. The aluminium surface is to be anodised with matt finish under electrically controlled condition in accrdance with ISI 1868.1962 specification for an average anodic film thickness of not less than 15 microns.All materials should be got approved by the SIPCOT Officer before fixzing.in position.etc.complete complying with standard specifications and as directed by SIPCOT Officers.
843
-
-
... More
ALUMINIUM FIXED / TOP HUNG- Supply and fixing of anodized aluminium fixed window / Top Hung powder coating any colour finishing and using 62x38x2mm@1.174 Kg/m Thick extended box section as vertically and horizondal spaced member and fixing of 5.5mm thick plain frosted (pin headed glass of approved quality) with necessary glaszzing clips,rubber beeding ,and including dismantling, making holes in RCC columns,beam,masonry wherever necessary with power drill to the extent required and made good to the oririnal condition after fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
464
-
-
... More
ALUMINIUM FIXED / TOP HUNG- Supply and fixing of anodized aluminium fixed window powder coating any colour finishing and using 62x38x2mm@1.174 Kg/m Thick extended box section as vertically and horizondal spaced member and fixing of 5.5mm thick plain frosted (pin headed glass of approved quality) with necessary glaszzing clips,rubber beeding ,and including dismantling, making holes in RCC columns,beam,masonry wherever necessary with power drill to the extent required and made good to the oririnal condition after fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
99
-
-
... More
Aluminium Ventilator fixed /Top Hung Supply and fixing of anodized aluminium using 62x38x2mm@1.174 Kg/m Thick extended box section as vertically and horizondal spaced member and fixing of 5.5mm thick plain frosted (pin headed glass of approved quality) with necessary glaszzing clips,rubber beeding ,and including dismantling, making holes in RCC columns,beam,masonry wherever necessary with power drill to the extent required and made good to the oririnal condition etc.complete complying with standard specifications and as directed by SIPCOT Officers. after fixing as directed by SIPCOT officials.
238
-
-
... More
Supplying, fabrication Fixing in position Aluminium Anodised natural colour matt finish door half glazed & half PLB Board, using rectangular aluminium to a section for frame and shutter as directed with necessary accessories such as rubber beeding Aluminium clips, best double action floor springs/door close handles,luck and glass including all materials labour and power construction charges required for febrication if necessary holes in rcc column, beams or masonary wherever necessary with power drill to the extent required and made good to the original condition after etc., complete.The aluminium surface is to be enclosed with matt finishing under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than 15 microns for all sectioln all the material should be got approved by SIPCOT Officer before fixing in position etc.complete complying with standard specifications and as directed by SIPCOT Officers.
75
-
-
... More
Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces etc. , including labour charges for fixing hold fasts. complying with relevant standard specifications etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
T.W.Scantling Below 2 m
4
-
-
... More
T.W.Scantling Between 2m to 3m
5
-
-
... More
Supplying and fixing of Teak wood Glazed Shutters etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Teak wood door GLAZED size 2.00m x3.00m
186
-
-
... More
Teak wood door FLUSH WITH VISION PANEL size 1.20m x 3.00m
40
-
-
... More
Teak wood door FLUSH PANEL size 1.00m x 3.00m
60
-
-
... More
TW FLUSH PAINTED D4 0.80x2.00 M
58
-
-
... More
Fire rated door :1no.Second Floor size 1.20m x 2.40m and 1no.Electrical panel size 2.40m x 2.40M etc.complete complying with standard specifications and as directed by SIPCOT Officers.
9
-
-
... More
Rolling Shutter :- Supply and erecting pull and push type rolling shutter with ISI make of approved size and section 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers ,transportation charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.12sqm area.
75
-
-
... More
Supplying and fixing of iron grills for the windows & venlators using 12mm square rods & MS flat alround 18x4 mm as including one coat of red oxide primer cutting, welding, labour for fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
195
-
-
... More
Painting new wood work with 2 finshing coats of synthetic enamel ready mixed paintr of apporved qly. And colour over one coat priming coat in all floors inculding cost of primer etc.complete complying with standard specifications and as directed by SIPCOT Officers. ( the make qly and colour of paint should be got approved by SIPCOT Officer before use on works)
260
-
-
... More
Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing , etc., complete complying as per the standard specifications. (The make, quality and colour of french polish , bees vax should be got approved by SIPCOT Officer before use on works.) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
420
-
-
... More
Providing Rain water harvesting pit of 1m dia and 600mm depth and filling the pit with 40mm stone jelly to a depth of 300mm from the top of the augering portion and filling with filling sand to a depth of 300mm over the stone jelly and covered with the pre-cast RCC perforated slab of 40mm thick excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position etc.complete complying with standard specifications and as directed by SIPCOT Officers.
15
-
-
... More
Augering 30cm dia bore hole in all soils and sub soils required depth to providing rain water harvesting from the centre of the rain water harvesting pit already excavated and filling the augering portion with 40mm size stone jelly etc.complete complying with standard specifications and as directed by SIPCOT Officers.
45
-
-
... More
Supply and planting of avenue trees including earth work excavation for pit of size 60x60x60cm filled with manure for 20cm depth and filling with river sand and red earth mix in the ratio of 1:1 for 40cm depth in the same pit and planting the avenue trees of approved varities to a height of 200cm from the ground level and maintaining them for the period of 6 month including watering, periodical manuring and replacing the avenue trees if dead etc.complete complying with standard specifications and as directed by SIPCOT Officers. (Tree sappling shall be got approved from SIPCOT Officer before planting).
30
-
-
... More
Supplying and fixing of triangular shape chicken mesh tree guard using 8cm dia casuarina vertical post and middle tie using country wood reeper of size 50x25mm and 25 gauge chicken mesh including labour charges for fixing the triangular tree guard etc.complete complying with standard specifications and as directed by SIPCOT Officers.
30
-
-
... More
Supplying Fabrication and Erection in position of M.S. scheme name and layout board with 50x50x6mm M.S. angle for vertical post and support posts with 2.5 mm thick M.S. sheet for a size at 1.80x1.20m with 40x40x6mm M.S. angle around the board and 50x6mm flat stiffeners on both directions including cost of welding charges, painting charges and drawing the layout and lettering the scheme details as directed by the departmental officers including PCC 1:5:10 (One of cement, five of sand and ten of HB stone jelly) for pits. 0.45 x 0.45 x 0.60m below Ground level and P.C.C 1:2:4 (one of cement, two of M sand and four of 20mm HB Stone Jelly) at 0.30 x 0.30 x 0.30m above Ground level for erection, conveyance charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for curing antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls. The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide. “Chloripyrifos” and spraying the same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II)/ 1981 and as directed by SIPCOT officers.
10652
-
-
... More
Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, including concrete filling the sunk portion with brick jelly lime concrete proportion of brick jelly to lime being 32:12½ by volume (32 cft of 20mm gauge brick jelly and 12 ½ cft of slaked lime) (No sand) and top 75mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of sand and sixteen of broken brick jelly) using 40mm size brick jelly including plastering the sides of sunk portion in Cm 1:3 (one of cement and three of sand) 12mm thick mixed with water proofing compound at 2Kg / m2 and top left rough to receive the floor plastering but including antisyphonage connection, one coat of bitumen for the sides, bottom and curing etc., complete in all floors.
-
-
-
... More
Toilets / in Ground Floor
8
-
-
... More
Toilets in First floor & 2nd floor
8
-
-
... More
Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap including cost and fixing of double flapped coloured plastic sheet cover PVC flushing cistern in appropriate level as directed by the SIPCOT officers at a maximum level of 5’6” and of approved brand of 10litres capacity including fittings such as CI brackets. PVC connection GM wheel valve, Hex nipple, etc.complete complying with standard specifications and as directed by SIPCOT Officers. (The Quality and brand of EWC and plastic cover shall be got approved from the SIPCOT Officer before fixing)
23
-
-
... More
Supply & Fixing of Bevelled edge mirror of approved quality and brand of size 500x400x5.5mm shelf type mounted in the PVC / Fibre Glass framed with necessary hard board backing including labour for fixing in position etc.complete complying with standard specifications and as directed by SIPCOT Officers.
3
-
-
... More
Supply & Fixing of Special type mirror of approved quality and brand of size 1000x780x5.5mm shelf type mounted in the PVC / Fibre Glass framed with necessary hard board backing including labour for fixing in position eetc.complete complying with standard specifications and as directed by SIPCOT Officers.
38
-
-
... More
Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of M sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 114 mm thick using chamber burnt bricks of size 9”x4-1/2”x3” (23x11.4x7.5cm) in CM 1:5 (One of cement and five of M sand) plastered with CM 1:3 (One of cement and three of M sand) 12mm thick etc.complete complying with standard specifications and as directed by SIPCOT Officers.
15
-
-
... More
Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of sand and ten of 40 mm gauge brick jelly) etc.complete complying with standard specifications and as directed by SIPCOT Officers. (The PVC Nahani Trap should be got approved from the EE before use)
130
-
-
... More
Supplying and fixing of porcelain Wash hand basin (white without pedestal), superior variety of size 550x400mm with all accessories such as powder coated cast iron brackets, 32mm dia C.P. waste coupling, Rubber plug and aluminium chain, 32mm dia 'B' class G.I. / PVC waste pipe, Angle Valve, 15mm dia Nylon connection inculding necessary, specials etc.complete complying with standard specifications and as directed by SIPCOT Officers.
47
-
-
... More
Supply and fixing of SS Sink of size 1200mm x550x180mm for Kitchen and dinning area in Ground floor etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Supplying and fixng of Fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (One of cment, three of sand and six of 20mm HBS jelly) using 20mm hard broken stone jelly mixed with secondary reinforcement fibre of approved quality of 0.25% by weight of cement (125 gm of fibre for 1 bag i.e 50 kg of cement) used including cost of all materials, moulding, curing, transportion, laying, pointing etc., for approach road, pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the SIPCOT officers. (The shapes of slab and brand and quality of fibre should be got approved from the SIPCOT officer before use)
761
-
-
... More
Supply and fixing of Lipped Mouth Procelain Flat Back Urinal with all accessories such nas 32mm dia bell mouth PVC connection,15mm dia GM wheel val;ue,15mm dia 'B' Class GI waste water pipe, 15mm dia Nylonconnection, 15mm dia brass Nipple etc,complete complying with standard specifications and as directed by SIPCOT Officers.
41
-
-
... More
Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped of masonry etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
264
-
-
... More
25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
1090
-
-
... More
Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like Elbow, Tee reducers, Plug , unions, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tap etc., Fully concealed in walls to the proper gradient and Alignment and redoing the Chipped portion of Masonry eetc.complete complying with standard specifications and as directed by SIPCOT Officers. 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
214
-
-
... More
Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/GI specials /GM specials like Elbow, Tee reducers, Plug , unions, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tap etc., Fully concealed in walls to the proper gradient and Alignment and redoing the Chipped portion of Masonry etc.complete complying with standard specifications and as directed by SIPCOT Officers.
50mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI specials
150
-
-
... More
Supplying and fixing the following dia PVC Soil waste & rain (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
110mm dia PVC SWR pipe including all required PVC specials etc.complete complying with standard specifications and as directed by SIPCOT Officers.
135
-
-
... More
75mm dia PVC Soil waste & rain (SWR) pipe including all required PVC specials etc.complete complying with standard specifications and as directed by SIPCOT Officers.
142
-
-
... More
Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line with relevant specials confirming to IS 14735 including jointing and making good of the dismantled portion with necessary connections to sanitary fittings etc.complete complying with standard specifications and as directed by SIPCOT Officers.
150
-
-
... More
Supply and Delivery of Double wall corrugated (DWC) Structured Wall Polyethylene Piping Systems (Pipe with online/ offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) FOLLOWING dia SN 8 Class pipe for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
150MM dia
60
-
-
... More
200MM dia
250
-
-
... More
Supplying and fixing of two way bib cock with Health faucet approved quality with ISI mark (Health faucet shall be got approved from SIPCOT Officer before use.) including all accessories etc.complete complying with standard specifications and as directed by SIPCOT Officers.
41
-
-
... More
Providing construction of Insepction chamber size 0.60 x 0.60 x 0.75m including earthwork excavation AND REFILLING, C.C (1:8:16) USING 40mm B.J METEL,B.W IN C.M (1:5), PLASTERING IN C.M (1:3) 12 mmT.K, R.C.C (1:2:4) PETTY WORKS, (50mm T.K PCC SLAB) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
10
-
-
... More
Providing construction of Insepction chamber size 0.90 x 0.90 x 0.75m including earthwork excavation AND REFILLING, C.C (1:8:16) USING 40mm B.J METEL,B.W IN C.M (1:5), PLASTERING IN C.M (1:3) 12 mmT.K, R.C.C (1:2:4) PETTY WORKS, (50mm T.K PCC SLAB) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
20
-
-
... More
Supplying and fixing of C.I. manhole cover with locking arrangements of approved quality and brand of size 0.6mx0.6m (50 kg) as per standard specifications including cost of material, labour charges for fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
2
-
-
... More
Supplying and fixing of SFRC manhole cover of approved quality and brand of size 0.6mx0.6m as per standard specifications including cost of material, labour charges for fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
10
-
-
... More
Supplying and fixing of SFRC manhole cover of approved quality and brand of size 0.9mx0.9m as per standard specifications including cost of material, labour charges for fixing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
20
-
-
... More
Supplying and fixing GI pipe handrails for Staircase & Ramp using 50mm dia GI pipe handrail at a height of 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe over the 25mmx4mm Flat at 30cm centre to centre and Horrizontal tie mid of the railling with 25mmx4mm flat including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members etc.complete complying with standard specifications and as directed by SIPCOT Officers.
122
-
-
... More
Plastering with Cement Mortar 1:3 (One cement and M.sand), 12mm thick in all floors including curing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
150
-
-
... More
Providing CUDDAPPAH SLAB for cupboard wardrobe, shelves, kitchen sinks, hearth slab and sunshade etc., for the following thickness including cost of Cuddappah slab and labour charges for fixing in position etc.complete complying with standard specifications and as directed by SIPCOT Officers. (Both sides polished)
-
-
-
... More
20mm Thick slab:-
19
-
-
... More
40mm Thick slab:-
8
-
-
... More
Damp proof course with Cement Mortar 1:4 ( One Cement and Four M sand) 12mm thick mixed with best approved quality water proof compound conforming to Indian Standard specification as specified by the departmental officers at 2% weight of cement used ,finishing and curing etc complete complying with standard specification.
410
-
-
... More
Providing Expansion joint treatment using silicon sealant of approved brand quality and ISI make and by making 20x15mm depth groove at joints and cleaning the surface free from foreign particles fungus and make polymer modified cementatious mortar smooth finishing at the top of terrace and vertical wall sections and fixing mastic pad for the rest of gap in the joints and placing 3mm thick foam to the full width of the joint and masking tape on either side of ;the groove and fill the grooves with single part silicon sealant with necessary tools and finishing the surface wiht soap water and masking tape and allow it to dry and seal the joint with adhesive tape on either side for walls and slabs ilncluding cost all materials of approved brand and labour charges and hire charges for tools etc.complete complying with standard specifications and as directed by SIPCOT Officers. (The silicon sealant polymer modified cementatious liquid should be got approved by the SIPCOT Engineers before use).
220
-
-
... More
(PART B) ELECTRICAL AND DG SET WITH STREET LIGHT, LIGHTENING POTECTION AND UPS.
-
-
-
... More
SECTION-A: HT CABLES,HT BREAKERS ,TRANSFORMER, LT BUSDUCTS
-
-
-
... More
Supply and laying, testing and commissioning of 3Core 120-185 sqmm 11kV, XLPE Aluminium conductor individual core screened, flat steel strip armoured, PVC sheathed cable inside the building in the prepared trench/under ground. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
40
-
-
... More
Manual Digging - Excavation and backfilling of cable trench for HT Cable comprising of : - a) Excavation of cable trench of 600mm(W) x 1200mm(D), b) Providing river sand for 150 mm depth below and above HT cable, c) Concrete RCC truffs and Back filling e)Safety/Warning taps and necessary minor civil plasterings. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
10
-
-
... More
Design, supply, termination, testing and commissioning of OUTDOOR type termination kit suitable for following cables with all required accessories.11KV, 3core 120-185Sqmm XLPE armoured aluminium cable.- OUTDOOR etc.complete complying with standard specifications and as directed by SIPCOT Officers.
4
-
-
... More
2 POLE STRUCTURE
-
-
-
... More
Supply and Erection of end to end of 11KV, Double Pole Structure comprising of:- 11 KV supply with following HT accessories complete as per Central Electricity Authority (measures relating to safty and electric supply) regulation. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
a) 1 Set - 2 Nos. 200 x 100 mm 9.15 Mtr high R.S.J. Pole with base plate, 100 x 50 x 6 mm M.S. channels for supports of line with M.S. clamps, bar etc., aluminium painting including supplying fixing of the following. b) 1 Set – 11KV, AB Switch 200A Single break type with all accessories.
c) 3 Sets – 11KV, HG Fuse with insulators. d) 3 Nos - 11KV Disk insulators with hardware. e) 3 Nos – 11KV Pin insulator. f) 1 Lot – ‘0’ Copper for bus & jumpers. g) 3 Nos - 11KV Lightning Arrestor. h) 1 Set - Stay rods, wires, Guy insulators.
1
-
-
... More
11kV HT Single VCB Panel
-
-
-
... More
Design, supply, installation, testing and commissioning of Single VCB panel, comprising of 1set of 11KV, 630A, 500MVA, 26.2kA VCB with all required necessary accessories. HT Outdoor single VCB Panel Board with all accessories and all metering, protection for satisfactory operation and as required by the statutory Electrical authorities as per the detailed specification and SLD enclosed. The panel shall be extendable at both sides. The cost is inclusive of suitable rating of builtin power pack for all control wiring. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
250 KVA DISTRIBUTION TRANSFORMERS
-
-
-
... More
Supply, unloading, handling, safe keeping, Installation, testing and commissioning of 250kVA, 11KV/433V, DYN11 Outdoor, ONAN type transformer with RTCC panel. Necssary phase and neutral CTs, control switches and transformer Protection relays should be provided at Transformer such as Transformer Buchholz relay, OLTC surge relay, Oil temperature relay, winding temperature relay, magnetic oil level gauge and pressure relief valve with NO/NC, Auxiliary relays as per standards. The transformer should be complied Energy efficiency Level-2 as per IS-1180. The primary and secondary winding material shall be of copper. All hardware shall be hot dipped galvanised. The copper flexible strip shall be provided at every gasketted joint for earthing continuity purpose. The Transformer shall be provided with cable termination box on primary side to terminate 3C 120Sqmm XLPE Al. Ar. 11kV HT cable and on secondary sideo terminate 1Rx 3.5Cx300 Sq.mm XLPE Al. Ar. LT cable and as per the detailed specification. The colour shade by the SIPCOT Officer before fixing potition 3 Nos - 11 KvA Disc insulaters with hardware, 3 Nos - 11 KVA pin Insulated of transformer shall be light grey, shade no. 631 of IS-5 and 1ltr. paint shall be supplied along with transformer for touch up at site. THE TRANSFORMER SHALL BE SUPPLIED WITH FIRST FILL OF OIL. Also 10% of extra transformer oil should be supplied in a non returnable sealed containers.
1
-
-
... More
FENCING & LEVELING
-
-
-
... More
Providing 2.4 mtr height weldmesh fencing with vertical angle iron supports spaced as required, 2M X 2.4M double side gate with hinged lock and key, painting with one coat red oxide and two coat aluminium paint, levelling yard with sand cussain of 150mm depth and 40mm blue metal of 150mm depth above grade level, Construction of 300mm high Curbwall all around Covering the Switchyard / transformer yard area as required and Necessary MS channel / angle iron support shall be provided. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
40
-
-
... More
Levelling of transformer yard with sand custion of 150mm depth and 40mm blue metal of 150mm depth above the sand level and all required materials etc.complete complying with standard specifications and as directed by SIPCOT Officers.
40
-
-
... More
SECTION-B LT PANELS
-
-
-
... More
MAIN MV PANEL:
-
-
-
... More
Design, Supply, fabrication, erection, testing and commissioning of - MV Panel suitable for 415Volts 3Phase 4wire system, fabricated from 14 & 16SWG CRCA sheet steel, 40 X 40 X 6 MS Angle panel frame, 800A TPN Aluminium bus bar Size Ph: 1R x 100 x 10mm, NL: 1R x 100 x 6mm, Earth 1R x 25 x 3mm and interconnections with black painted and SMC Bus bar supports. Bus bar supports, Current density of the Bus bars shall not exceed, single fronted, free standing, front hinged, rear removable, extendable on both sides, dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at bottom, complete with internal wiring, ferrules, name plates, painting etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
EB Incomer comprising of :
-
-
-
... More
1 No. 630 Amps 4P, 50KA, Mechanical draw out type Air Circuit Breaker trip - release for O/L, S/C, E/F protection and Mechanical Interlock for EB.
-
-
-
... More
DG Incomer -
-
-
-
... More
1 No. 630 Amps 36kA 4P, L&T MCCB with RHOM & Spreader and Mechanical Interlock for DG.
-
-
-
... More
Solar Incomer-
-
-
-
... More
1 Nos. of 160 Amps 4 Pole 36kA µP based MCCB with door interlock and all other accessories.
-
-
-
... More
Instrumental compartment
-
-
-
... More
Combined digital meter, Maximum demand controller , Ammeter, Voltmeter, Instantaneous over current, earthfault relay (3 O/C+ 1 E/F), Necessary CTs, PTs, control MPCB/MCB/ ELCB/RCBOs, RYB Indication lamps and “ON/OFF/Trip/Rest" indicating lamp, voltage surge protection with emergency lockable push buttons and also refer the specification and SLD.
-
-
-
... More
OUTGOINGS
-
-
-
... More
400A 4P MCCB 36KA - 1 Nos
-
-
-
... More
250A 4P MCCB 36KA - 3 Nos
-
-
-
... More
200A 4P MCCB 36KA - 1 Nos
-
-
-
... More
125A 4P MCCB 36KA - 1 Nos
-
-
-
... More
100A 4P MCCB 36KA - 3 Nos
-
-
-
... More
With necessary aluminium busbars, interconnections, providing RYB phase indication lamps, surge protection devices with suitable fuses, Digital multi function meter with necessary CTs, control MCB/MPCB/RCBOs etc. at incoming feeder. Also providing ON,OFF & TRIP indication lamps at both incoming and outgoing feeders and all as per the relevent standards and SLD/ specification enclosed.All MCCBs should have two (spare) potential free contactor for monitoring ON, OFF & TRIP status of each through BMS
-
-
-
... More
Incoming feeder MFM should have the facility to monitor Harmonic THD and individual harmonic display+ Regular parameters like V, I, KVA, KVAR, KW, KWH, KVARh, PF, Freq, Max, AVG etc.
All Outgoing Feeders in Main LT panel shall be with MFM monitoring V,I, KWH, KVARH, PF with RS 485 BMS integration. All the metres to be wired and terminated at common metre chamber / marshalling feeder of each panel section.
-
-
-
... More
The DG incoming feeders should have the facility for load shedding during the loads are connected to DG source. Accordingly it should be decided which DG should run / goes to shut off to cater the live demand load/ based on the load consumption and all the incoming breakers of DG should be logically controlled to meet the said requirement with necessary control relays and logic controls as required. Also please note that all the incoming feeders of Main LT panel should be both electrically and mechanically interlocked with each other
-
-
-
... More
630Amps 4P 36kA aluminium busbars:- All the neutral busbars shall have the same capacity of phase busbars.
-
-
-
... More
125KVAR APFC PANEL
-
-
-
... More
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed 125KVAR APFC PANEL with Harmonic filters. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Incoming
-
-
-
... More
250A TPN MCCB 36kA with all connected accessories - 1set as incomer.
-
-
-
... More
Instrumental compartment
-
-
-
... More
Multi function meter, Voltmeter and Ammeter with selector switches, R,Y,B and On/Off/Trip indication lamp, Control MCBs, necessary CTs, PTs, PF meter etc. as per the specification and SLD.
-
-
-
... More
1 Each Intelligent Automatic Power Factor Controller and Voltage & Power Factor Monitoring Relay can control up to 12 Capacitor Banks with LED indiication for Alarm code, Each of Banks selected, PF status-Lead / Lag / Unity, Auto & Manual Mode, DIP Switches selection for Each of Banks / Time Relay, Bank ratios and the relay should have dual incoming ports to receive the sensing cable from two different source / with summation CTs arrangements with single input signal port relay etc., with control wiring and all other required necessary accessories.
-
-
-
... More
Outgoing: Total 125 KVAR
-
-
-
... More
1 Sets of 50 kVAR Capacitor (2x 25 kVAR) with suitable 63A TP MCCB 25kA with capacitor duty contactor, control MCBs, On & Off Indicating Lamp, Push Buttons, Ammeter with Selector switch, CTs etc.,Including interconnection busbars, contrring with all other required necessary accessories.
-
-
-
... More
2 Sets of 25 kVAR Capacitor (1x 25 kVAR) with suitable 63A TP MCCB 25kA with capacitor duty contactor, control MCBs, On & Off Indicating Lamp, Push Buttons, Ammeter with Selector switch, CTs etc.,Including interconnection busbars, contrring with all other required necessary accessories.
-
-
-
... More
2 Sets of 10kVAR Capacitor (1 x 10 kVAR) with suitable 32A TP MCCB 25kA with capacitor duty contactor, control MCBs, On & Off Indicating Lamp, Push Buttons, Ammeter with Selector switch, CTs etc.,Including interconnection busbars, contrring with all other required necessary accessories.
-
-
-
... More
1 Set of 5kVAR Capacitor (1 x 5kVAR) with suitable 32A TP MCCB 25kA with capacitor duty contactor, control MCBs, On & Off Indicating Lamp, Push Buttons, Ammeter with Selector switch, CTs etc.,Including interconnection busbars, contrring with all other required necessary accessories.
-
-
-
... More
Each capacitor bank (with 7% series reactor) in a separate compartment with necessary ventilation arrangemnts with wire mesh arrangements as required by the Electrical Authorities .
-
-
-
... More
With necessary aluminium busbars, interconnections, providing Ammeter with selector switches, phase indication lamp, control fuse and switch control, PFmetre etc. with RS 485 BMS integration as per the specification.
-
-
-
... More
250Amps TPN aluminium busbars:- All the neutral busbars shall have half the capacity of phase busbars.
-
-
-
... More
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. MLDB PANEL etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Incoming
-
-
-
... More
125A 4P MCCB 25kA with all connected accessories – 2No. as incomer
-
-
-
... More
Outgoing
-
-
-
... More
100A TPN MCCB 25KA - 2 Nos
-
-
-
... More
63A TPN MCCB 25KA - 2 Nos
-
-
-
... More
32A TPN MCCB 25KA - 4 Nos
-
-
-
... More
With necessary aluminium busbars, interconnections, providing Combined Digital type Mulitifunction Meter with RS485, RYB phase indication lamps, surge protection devices with necessary CTs, control MCB/MPCB/RCBOs etc. at incoming feeder. Also providing ON,OFF & TRIP indication lamps in all incoming & outgoing feeders with control MCBs / MPCB etc. All MCCBs should have two (spare) potential free contactor for monitoring breaker ON, OFF & TRIP status through BMS etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
125 Amps TPN aluminium busbars:- All the neutral busbars shall have same the capacity of phase busbars.
-
-
-
... More
WORK SHOP PANEL
-
-
-
... More
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. WORK SHOP PANEL etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Incoming
-
-
-
... More
400A 4P MCCB 25kA with all connected accessories – 1No. as incomer
-
-
-
... More
Outgoing
-
-
-
... More
200A TPN MCCB 25KA - 5 Nos ,100A TPN MCCB 5
-
-
-
... More
With necessary aluminium busbars, interconnections, providing Combined Digital type Mulitifunction Meter with RS485, RYB phase indication lamps, surge protection devices with necessary CTs, control MCB/MPCB/RCBOs etc. at incoming feeder. Also providing ON,OFF & TRIP indication lamps in all incoming & outgoing feeders with control MCBs / MPCB etc. All MCCBs should have two (spare) potential free contactor for monitoring breaker ON, OFF & TRIP status through BMS etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
200Amps TPN aluminium busbars:- All the neutral busbars shall have same the capacity of phase busbars.
-
-
-
... More
SUB PANEL - 3 NO'S for WORK SHOP
-
-
-
... More
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclo SUB PANEL 1 TO 3 etc.complete complying with standard specifications and as directed by SIPCOT Officers.
3
-
-
... More
Incoming
-
-
-
... More
200A 4P MCCB 25kA with all connected accessories – 1No. as incomer
-
-
-
... More
Outgoing
-
-
-
... More
100A TPN MCCB 16KA - 5 Nos. 63A TPN MCB 5Nos , 32A 3 Nos
-
-
-
... More
With necessary aluminium busbars, interconnections, providing Combined Digital type Mulitifunction Meter with RS485, RYB phase indication lamps, surge protection devices with necessary CTs, control MCB/MPCB/RCBOs etc. at incoming feeder. Also providing ON,OFF & TRIP indication lamps in all incoming & outgoing feeders with control MCBs / MPCB etc. All MCCBs should have two (spare) potential free contactor for monitoring breaker ON, OFF & TRIP status through BMS etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
200 Amps TPN aluminium busbars:- All the neutral busbars shall have same the capacity of phase busbars.
-
-
-
... More
WELDING PANEL
-
-
-
... More
Design, Supply, Installation, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. WELDING PANEL etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Incoming
-
-
-
... More
250A 4P MCCB 25kA with all connected accessories – 1No. as incomer
-
-
-
... More
Outgoing
-
-
-
... More
100A TPN MCB 25KA - 3 Nos , 63A TPN MCB 4 Nos 32A TPN MCB 2 nos
-
-
-
... More
With necessary aluminium busbars, interconnections, providing Combined Digital type Mulitifunction Meter with RS485, RYB phase indication lamps, surge protection devices with necessary CTs, control MCB/MPCB/RCBOs etc. at incoming feeder. Also providing ON,OFF & TRIP indication lamps in all incoming & outgoing feeders with control MCBs / MPCB etc. All MCCBs should have two (spare) potential free contactor for monitoring breaker ON, OFF & TRIP status through BMS etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
250 Amps TPN aluminium busbars:- All the neutral busbars shall have same the capacity of phase busbars.
-
-
-
... More
SECTION-C: DISTRIBUTION BOARDS
-
-
-
... More
All installation works should be as complete and as directed by Employer / Empolyer's representative.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
PDB'S:
-
-
-
... More
VTPN DB- 8 WAY KITCHEN
-
-
-
... More
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door(metal)with 1 no.100 A 4PMCB Isolatoras incoming and 16/25/32/40A TP MCB 10KA (C-Curve) – 8 Nos. as outgoings. as outgoing in flush with wallwith earth connection only.Higher etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
100A 4P MCB 10kA – 1No. as incomer.
-
-
-
... More
16/25/32/40A TP MCB – 8 Nos. as outgoings.
-
-
-
... More
With necessary tinned copper busbars, interconnections, earth bus, neutral bus. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc.
-
-
-
... More
PDB - (7 segment DB)- 8 WAY
-
-
-
... More
Supply and fixing of 7 segment8 way63A TPNMCB sheetsteeldistributionboard (Higherend)with metal/ acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
5
-
-
... More
63A 4P MCB 10kA – 1No. as incomer.
-
-
-
... More
63A DP ELCB 30MA – 3 Nos. as outgoings.
-
-
-
... More
6Ato32ASPMCB - 24nos.
-
-
-
... More
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc.
-
-
-
... More
LDB (7 segment DB)-4 WAY
-
-
-
... More
Supply and fixing of 7 segment4 wayTPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provisionforaccomodating one no.4 pole incoming MCB /Isolatorand another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. withthe followingin flush with wall with earth connection only. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
9
-
-
... More
63A4PMCB- 1no.
-
-
-
... More
63A 4P30MARCCB/ELCB-3no.
-
-
-
... More
6Ato32ASPMCB - 12nos.
-
-
-
... More
With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc.
-
-
-
... More
SECTION–D : CABLES AND TERMINATION
-
-
-
... More
All installation works should be as complete and as directed by Employer / Employer's representative.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Supply and Laying of PVC armoured LTUG cable with suitable size HDPE pipe in atrench to be excavated at a depth of 0.75 metre andrefilling the earth to make good. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
3.5Core 300 Sq.mm Aluminium armoured cable
175
-
-
... More
3.5Core 185 Sq.mm PVC armoured cable
200
-
-
... More
3.5Core 120 Sq.mm PVC armoured cable
40
-
-
... More
3.5Core 95 Sq.mm PVC armoured cable
40
-
-
... More
3.5Core 70 Sq.mm PVC armoured cable
40
-
-
... More
3.5Core 50 Sq.mm PVC armoured cable
100
-
-
... More
3.5Core 35 Sq.mm PVC armoured cable
350
-
-
... More
3.5Core 25 Sq.mm PVC armoured cable
50
-
-
... More
4Core 16 Sq.mm PVC armoured cable
350
-
-
... More
1 Core 6 Sq.mm PVC Copper flexible cable
300
-
-
... More
7 Core 2.5 Sq.mm PVC Copper armoured cable
30
-
-
... More
16 Core 2.5 Sq.mm PVC Copper armoured cable
30
-
-
... More
24 Core 2.5 Sq.mm PVC Copper armoured cable
30
-
-
... More
Supply and termination of the following size cables with suitable glands (weather proof glands) with suitable size PVC boot and suitable crimping socket, gland earthing by using copper flexible and all other necessary accessories. (copper sockets for copper cables and Alu. Sockets for alum. Cable) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
3.5Core 300 Sq.mm Aluminium armoured cable
10
-
-
... More
3.5Core 185 Sq.mm PVC armoured cable
10
-
-
... More
3.5Core 120 Sq.mm PVC armoured cable
4
-
-
... More
3.5Core 95 Sq.mm PVC armoured cable
4
-
-
... More
3.5Core 70 Sq.mm PVC armoured cable
4
-
-
... More
3.5Core 50 Sq.mm PVC armoured cable
4
-
-
... More
3.5Core 35 Sq.mm PVC armoured cable
40
-
-
... More
4Core 16 Sq.mm PVC armoured cable
20
-
-
... More
1 Core 6 Sq.mm PVC Copper flexible cable
20
-
-
... More
7 Core 2.5 Sq.mm PVC Copper armoured cable
6
-
-
... More
16 Core 2.5 Sq.mm PVC Copper armoured cable
6
-
-
... More
24 Core 2.5 Sq.mm PVC Copper armoured cable
6
-
-
... More
SECTION–E : EARTHING ,CABLE TRAYS AND MS ITEMS
-
-
-
... More
BODY EARTH
-
-
-
... More
Supply and installation of UL listed and CPRI tested copper bondedsteelelectrode of 25 mm dia. With a min. coating thickness of 250 microns andlength of 3 meters. 30kgs of earth enhancing compound needs to be considered to fill the 100mm augered hole surrounding to the electrode.65x10x300mm copper busbar to be exothermically welded to the electrode. All connection to the busbar shall be exothermically welded as per the drawing and should comply with IEEE 837 and UL approved .The rate shall include excavation of earth, filling with back fill compound, exothermic welding etc. Also the rate is inclusive of construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortor. The chamber shall be provided with 450mm x 450mm heavy duty RCC cover with frame and lockable facility. The Complete installation shall be as per the drawing and technical specifications. ( EB YARD -4Nos ,DG-4Nos, LT Panel - 2 Nos, VCB Panel - 2Nos, UPS -2Nos , Lift - 2Nos.) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
16
-
-
... More
NEUTRAL EARTH
-
-
-
... More
Supply and installation of earth pipe electrode as per IS 3043 complete with 3 mtr long with 40mm dia 'B' class G.I. pipe and copper earth plate of size 600mm x 600mm x 3mm including 2 Runs of 50 x 10mm CU . flat upto test link from plate earth electrode, watering funnel and necessary bolt, nut and double washer. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortor. The chamber shall be provided with 450mm x 450mm heavy duty RCC cover with frame and lockable facility. The plate electrode shall be filled with 50Kgs of earth enhancing compound(PROCEM) tested as per IEC 62561-7 as required as full depth. The Cover shall be heavy duty to suit heavy vehicle movements (Transformer neutral -2Nos & DG neutral-4Nos UPS Neutral- 1no) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
7
-
-
... More
EARTH FLAT
-
-
-
... More
Supply and laying of following sizes of CU / GI strips with all necessary accessories to be laid on ground / wall/ on tray etc. The cost is including the required bimettalic strip to make a smooth connectivity between GI and copper stip and also the cost is including the excavation and refilling the soil. The strip should be run minimum 600mm depth from finished ground level if burried in ground directly. (On non availability of specified flat / strip size, immediate higher size strip must be provided). etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Supply and laying of 40 x 6 mm CU. Flat with required black colour sleeves for transformer & DG neutral.
150
-
-
... More
Supply and laying of 50 x 6 mm G.I flat
50
-
-
... More
Supply and laying of 25 x 6 mm G.I flat
250
-
-
... More
Supply and laying of 25 x 3 mm G.I flat
250
-
-
... More
Supply and laying of 8 gauge copper wire
500
-
-
... More
Supply and laying of earth station made up of 500mm length 50 x 6 mm CU. flat with necessary insulators at both end, Making required holes and filled with suitable size bolt, nut and double washer etc. as required. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
4
-
-
... More
Supply, erection of following sizes hot dipped GI ladder / perforated type cable rack system made out of sheet steel folded to required shape with adequate number of supports. The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates,materials.Thecableracksshallbe suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc.The rack shall have suitable cable clamping arrangements etc. complete with all civil works for fabrication details.Refer enclosed drawing. The cable tray supports spacing shall be at every 1.25 mtrs and also next to both side of bends as per standards. The height of the hanging arrangement shall be as per drawing and with all accesories to fix the hangers at roof with required clamps nuts & bolts to be considered. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
a) Perforated type
-
-
-
... More
For Perforated Cable trays designed, tested and confirming to IEC 61537, thickness of cable tray should be according to the manufacturers catalogue. For locally fabricated and non tested tray, thickness should be 2 mm up to span length of 1.5 meter, 2.5 mm for span length between 2 to 3 meter and 3 to 4 mm for span length between 4 and 10 meter etc.complete complying with standard specifications and as directed by SIPCOT Officers.
(The gripple make support to be consider up to the size of 150mm cable tray and above the size shall be as MS angle / channel support which will be measured and paid separately.)
-
-
-
... More
100mm x 50mm
50
-
-
... More
300mm x 50mm (BLACK COLOUR POWDER COATED TRAY)
50
-
-
... More
b) Ladder type
-
-
-
... More
For Ladder Cable trays designed, tested and confirming to IEC 61537, thickness of cable tray should be according to the manufacturers catalogue. For locally fabricated and non tested tray, thickness should be 2.5 mm up to span length of 1.5 to 2 meter, 3 mm for span length between 2.5 to 4 meter and 3 to 4 mm for span length between 5 and 10 meter. etc.complete complying with standard specifications and as directed by SIPCOT Officers. (The gripple make support to be consider up to the size of 150mm cable tray and above the size shall be as MS angle / channel support which will be measured and paid separately)
-
-
-
... More
150mm x 50mm
100
-
-
... More
450mm x 75mm
20
-
-
... More
600mm x 100mm
15
-
-
... More
Supply and Installation of MS flat / angles / channels supports for various purpose if required with various sizes including cutting,welding,grinding,fixing accessories and one coat of primer & two coats of enamel paints, minor civil works like grouting existing floors and walls etc. as required. etc.complete complying with standard specifications and as directed by SIPCOT Officers. (Note: The flat / angles/channels weights will be arrived on the basis of theoretical calculation only).
500
-
-
... More
SECTION – F : POINT WIRING, CONDUITS & WIRINGS, SWITCH & SOCKETS AND RACEWAYS & JUNCTION BOXES.
-
-
-
... More
The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same.
-
-
-
... More
Wiring to the Circuit mains (DB to switch board / first point of power socket) using 3 Runs of 2.5sqmm (Phase, Neutral + Earth conductor) multi strand PVC insulated copper conductor (FRLS) in 20mm dia. MS conduit in open system in above false ceiling and concealed system in below false ceiling with all other necessary accessories, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1250
-
-
... More
Wiring to the Circuit mains (DB to switch board / first point of power socket) using 6Runs of 2.5sqmm (2Nos of single phase circuit and each should have Phase, Neutral & Earth conductor) multi strand PVC insulated copper conductor (FRLS) in 25mm dia. MS conduit in open system in above false ceiling and concealed system in below false ceiling with all other necessary accessories, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
100
-
-
... More
Wiring to the Circuit mains (DB to switch board / first point of power socket/AC) using 2 Runs of 4sqmm + 1 Run of 2.5sqmm (Phase, Neutral + Earth conductor) multi strand PVC insulated copper conductor (FRLS) in 20mm dia. MS conduit in open system in above false ceiling and concealed system in below false ceiling with all other necessary accessories,etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1100
-
-
... More
Wiring to the light points using 3Runs of 1.5sqmm multistrand PVC insulated FRLS copper wirein 20 mm MS conduit for primary point(switch to first point) and 3Runs of 1.5 Sqmm multi strand PVC insulated FRLS copper wire in 20mm MS conduit for secondary point (point to point looping), on direct ceiling /wall/ on tray etc.. The primary point wiring shall be concealed system below the false ceiling and open system at above false ceiling. The primary point rate should inclusive of supply and fixing of 6A modular type switch in a suitable size modular box in concealed system, the primary & secondary point rate should inclusive of supply, laying of GI flexible hose for lighting drops from ceiling, all complete complying with relevant standard specifications ( Roof PVC conduit ) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Primary point
450
-
-
... More
Secondary point
615
-
-
... More
Wiring to the light points using3 Runs of 1.5sqmmmulti strand PVC insulated copper conductor (FRLS) for two way control(switch to switch and first point of lighting) in suitable size MS conduit in open / concealed system in RCC slab/ wall / column etc. The rate should inclusive of supply and fixing of 2 sets of 1 Each 6A 2 way modular type switch with face plate in a suitable size modular box in concealed system, with all other necessary accessories, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
6
-
-
... More
Supply, laying, testing and commissioning of 3core 2.5sqmm multistrand PVC insulated copper flexible cable (FRLS) in 25mm PVC conduit in concealed system in floor/ wall / column etc.complete complying with standard specifications and as directed by SIPCOT Officers.
200
-
-
... More
Supply, laying, testing and commissioning of 3core 4sqmm multistrand PVC insulated copper flexible cable (FRLS) in 25mm PVC conduit in concealed system in floor/ wall / column etc.complete complying with standard specifications and as directed by SIPCOT Officers.
100
-
-
... More
Supply, laying, testing and commissioning of 3core 6sqmm multistrand PVC insulated copper flexible cable (FRLS) in 25mm PVC conduit in concealed system in floor/ wall / column etc.complete complying with standard specifications and as directed by SIPCOT Officers.
200
-
-
... More
Ceiling fan point wiring: Supply, wiring, connecting & commissioning of 3Runs 1.5 Sq.mm. (PNE- from switch board to fan point) PVC insulated multistranded FRLS copper wires in 20mm dia, HMS PVC conduit along with 1No. Modular 6A one way switch, fan step regulator with moulded front plate, GI back box and fan hook and other accessories as etc.complete complying with standard specifications and as directed by SIPCOT Officers.
150
-
-
... More
SWITCH AND SOCKETS:
-
-
-
... More
Supply, fixing, testing and commissioning of Modular Switch & Socket combination in suitable modular box and Metal Clad sockets with MCB in Open/Recessed system.The necessary civil works shall be done for connected works and no extra payment will be made for the same etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
1No 6A 240V 3pin Socket Controlled by 6A SP Switch with suitable size front plate and surface / metal box in open / recessed system.
300
-
-
... More
2Nos 6/10/13A 240V Universal Socket Controlled by 1no. 16A SP Switch with suitable size front plate and surface / metal box in open / recessed system.
15
-
-
... More
3Nos 6/10/13A 240V Universal Socket Controlled by 1no. 16A SP Switch with suitable size front plate and without back box in recessed system.(For UPS Power in Workstations).
10
-
-
... More
1No 6A 240V 5pin Socket Controlled by 6A SP Switch with suitable size front plate and surface / metal box in open / recessed system.
99
-
-
... More
1No 6/16A 240V 5pin Socket Controlled by 16A SP Switch with suitable size front plate and without back box in recessed system.
110
-
-
... More
1No 16A 240V 3 pin industrial type polycarbonate plug & socket with interlocking arrangement andcontrol breaker of 16A SP MCB (C-Curve) in a suitable size enclosure fixed in open / recessed system.
9
-
-
... More
RACEWAYS AND JUNCTION BOXES:
-
-
-
... More
Supply, fixing of the following PVC conduit /Aluminum Channel including stiffner at required intervals in open system in floor (Consider before putting screeding on floor) including co ordination with modular vendor and Civil verdor while doing screeding on floor and small cutting ,chipping, removal of debris,plastering if required as per site condition in the floor/wall to make good finish and to match with the original surface etc. (The thickness: 2mm for Top & Base and 1.6mm for sides)
-
-
-
... More
50mm x 25mm
25
-
-
... More
100 mm x 40mm
50
-
-
... More
32mm PVC conduit
25
-
-
... More
SECTION–G :STARTER PANELS
-
-
-
... More
Supplying & erecting approved make motor control cubical panel [Star delta] made from 16G CRCA sheet duly epoxy powder painted inside and outside with hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty) main fuses. Digital volt and current meter (in a single unit) with micro controller based control unit and current sensing single phasing preventer electronic overload protection, over voltage (Programmable) protection and under voltage (Programmable) protection, prod less dry run protection programming facility for setting of all parameter like overload current, high voltage limit, low voltage limit, dry run limit with digital indication on seven segment LED display for any fault like over load, high voltage, low voltage, dry running single crimped, electronic star delta timer, feather touch start / stop push buttons to be erected on angle iron frame. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
DOL up to 5.0 H.P.
3
-
-
... More
Supplying & erecting approved make 3 phase motor control cubical panel ( Star - Delta) made from16 G. CRCA sheet duly painted with epoxy powder painted inside and outside with hinged doors and locking arrangement, consisting of suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing preventer cum water level. Guard (Complete unit), Toggle switch to by pass Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load relay, Automatic water level controller, Ammeter & Voltmeter each with two way selector switch incoming wires duly socket Crimped, Panel to be erected on angle iron frame grouted on wall as directed. Star Delta & main contactor, overload relay, thermal / Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be erected on angle iron frame ground on wall. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
S/D up to 12.5 H.P.
3
-
-
... More
SECTION –H : LIGHTING LUMINAIRES
-
-
-
... More
Supply, Fixing, testing and commissioning of the following light fittings with all other necessary accessories. The rate shall be inclusive of suitable MS supports,GI Clamps and gripple make cable with crimp arrangement ,and chain suspenders .The height of the hanging arrangement shall be as per drawing and with all accesories to fix the hangers at purlin, rafter beam ,MS supports and walls with required clamps nuts & bolts to be considered. Also the rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Supply of 15W Recess mounted LED downlighter made of pressure die cast aluminum housing with high efficiency reflector , LED used shall be SMD type and fixture should have minimum efficacy at system level (Non Chip Level)=100lumens / watt,Life of fixture(including Driver):50K Hrs.@L70B50 Lumen Maintance , CCT upto 4000 , CRI80 , PF 0.95 & THD10% , an operating voltage range of 140 - 270V. minumum internal surge protection 2.0KV the fixture design should comply with IS10322 , EMC / EMI compliance maintaining driver leakage current as per IEC 60598 , minimum system Lumens 1200 , Philips - DN296B LED15S PSU WH etc.complete complying with standard specifications and as directed by SIPCOT Officers.
150
-
-
... More
Supply, fixing, testing and commissioning of 4' 20W LED Tubler type Light fitting etc.complete complying with standard specifications and as directed by SIPCOT Officers.
300
-
-
... More
Supply, fixing, testing and commissioning of LED Cove light.Similar to Philips - Smart LED Flexible Cove etc.complete complying with standard specifications and as directed by SIPCOT Officers.
100
-
-
... More
Supply, fixing, testing and commissioning of decorative luminaire etc.complete complying with standard specifications and as directed by SIPCOT Officers.
10
-
-
... More
Supply , fixing , testing and commissioning of 10W LED BulkHEad Light fitting with all other accessories.
100
-
-
... More
Supply of 70W LED highbay symmetric beam luminaire with housing made of single piece pressure die-cast aluminium
75
-
-
... More
SECTION-I : STREET LIGHT POLE AND ALLIED WORKS
-
-
-
... More
Supply, erection, testing and commissioning of 7 Mtrs. height stepped steel tubular poles above foundation (Single Arm) 1mtr length inside the RCC foundation along with 1 M long bracket including providing providing concreting in foundation. Construction of pillar accommodating fuse housed in weather proof box including wiring to the light fittings with 3C 2.5 sq.mm PVC insulated copper conductor, 2Pole 6 Amp MCB, 4 way 30 A rated terminal block,loop in loop out cable arrangements, coil earthing etc. The pole shall be Hot dip galvanised (80- 100 Microns) with 1Mtr. long 25mm dia 'B' class G.I. Pipe as earth electrode with charcoal ,Salt with 10SWG copper wire interconnected with street light pole.The rate includes excavation and foundation for erecting the above referred street light as required at site and inclusive of necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. The rate includes excavation and foundation for erecting the above referred street light as required at site and inclusive of necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Single bracket type.
20
-
-
... More
Supply and Fixing of 2Mtr height wall bracket with all other necessary accessories, top bracket should suitable for fixing the street light luminaire. The rate should inclusive of supplying and fixing of 1No. of 6A SP MCB with mounting rail and 25A 4 way terminal connector with all other necessary accessories in suitable size weather proof enclosure. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
20
-
-
... More
Supply, Fixing, testing and commissioning of 36W LED street light fitting with control gear fixed with street lighting. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
20
-
-
... More
Supply, Fixing, testing and commissioning of 42W LED Gatelight luminaire . Decorative LED posttop of 42W with LED aranged in ring. No upward light component etc.complete complying with standard specifications and as directed by SIPCOT Officers.
6
-
-
... More
Supply, Fixing, testing and commissioning of 27W LED Post top luminaire.Decorative LED post top of 27W with LED arranged in ring with 4.5 meter pole. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
6
-
-
... More
Supply, Fixing, testing and commissioning of 6W Decorative LED Spike light with all other accessories (TREE-UP LIGHTER WITH ANGLE ADJUSTMENT AND SPIKE) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
8
-
-
... More
Supply, Fixing, testing and commissioning of 4W LED BOLLARD luminaire. Decorative LED BOLLARD of 4W with all other accessories etc.complete complying with standard specifications and as directed by SIPCOT Officers.
10
-
-
... More
Supply, Fixing, testing and commissioning of 3W Decorative LED STEP LIGHT with all other accessories. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
15
-
-
... More
Design, supply, laying of following size PVC/XLPE (FRLS) insulated outer sheathed (1100 V grade) Copper armoured conductor cable laid in ground.(The rate shall exclusive of civil works like excavation, sand filling etc. Same will be measured separately) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
4C x 6 Sqmm PVC Cu. Ar. cable.
250
-
-
... More
4C x 4 Sqmm PVC Cu ar. cable.
75
-
-
... More
3C x 4 Sqmm PVC Cu ar. cable.
40
-
-
... More
Supply and termination of the following size cables with suitable double compression type weather proof glands with suitable size PVC boot and suitable crimping socket, gland earthing by using copper flexible and all other necessary accessories . (copper sockets for copper cables ) etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
4C x 6 Sqmm PVC Cu. Ar. cable.
30
-
-
... More
4C x 4 Sqmm PVC Cu ar. cable.
20
-
-
... More
3C x 4 Sqmm PVC Cu ar. cable.
10
-
-
... More
Supply and fixing of the PVC Outdoor weather proof Junction boxes suitable for post of lattern poles for loop-in loop-out cables with suitable knock out holes for cable glands, termination arrangment with earthing and necessary mounting arrangement on poles. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
47
-
-
... More
Earth Excavation of the 300mm(W) x 750mm(D) cable trench in soil including river sand cushioning (150mm thick both at top and bottom of the cable), brick protection covering (size of brick 220 x 100 x 70 mm) after laying the cable,back filling, ramming and compacting the soil,etc., etc.complete complying with standard specifications and as directed by SIPCOT Officers.
100
-
-
... More
Earth Excavation of the 600mm(W) x 1000mm(D) cable trench in soil including river sand cushioning (150mm thick both at top and bottom of the cable), brick protection covering (size of brick 220 x 100 x 70 mm) after laying the cable,back filling, ramming and compacting the soil,etc., etc.complete complying with standard specifications and as directed by SIPCOT Officers.
25
-
-
... More
Supply and laying of the following size RCC hume pipes with collar.The cost including excavation to a depth of 750mm to 1000mm from existing ground level, plasterings, back filling, ramping the soil, making the surface to match the original surface etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
100 mm dia
75
-
-
... More
200 mm dia
40
-
-
... More
300 mm dia
50
-
-
... More
Construction of following size Masanory inspection (Man hole) chamber with cover for hume pipes .The man hole cover shall be provided with heavy duty CI/RCC type for inspection chamber. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Chamber size: 450x450x1000mm
10
-
-
... More
Chamber size: 600x600x1000mm
2
-
-
... More
Chamber size: 1000x1000x1000mm
2
-
-
... More
SECTION – J : LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Supply, fixing of following materials for lightning arrestor system. The rate includes necessary accessories like 'Wood screws, plastic dowels, cross connector, expansion piece, clamps, suitable concrete base part with cover for fixing air terminal, conductors holder at wall / roof/ ACP etc. and all connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
copper strip 3 Meter
3
-
-
... More
copper strip 4 Meter
2
-
-
... More
Test link (at every down conductor)
11
-
-
... More
GI Strip (25x6 mm)
350
-
-
... More
Earthing: C-Bar 3/4" dia, UL listed, 3000 mm long + 22.6 Kg GC+ and clamp for termination. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortor. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The Cover shall be heavy duty to suit heavy vehicle movements.
10
-
-
... More
SCHEDULE- II -DG SET AND ALLIED WORKS
-
-
-
... More
Design, Manufacture, Transportation, Supply, Installation, Testing and Commissioning of radiator water cooled 200KVA DG set, 1500 rpm, four stroke,designed for operating on 415V, 50 Hz, 0.8 pf, complete with all accessories, like base frame, fuel tank of 990 litres,batteries 12V or 24V suitable for starting of the DG Set with standard control panel and includes the following transport, insurance, handling, safe keeping at site etc., erection, installation, testing and commissioning including performance tests as per Specifications. etc.complete complying with standard specifications and as directed by SIPCOT Officers. The necessary foundation will be provided by other agency.The rate shall also include the following 1. Acoustic enclosure, 2. Isolator panels if required 3. Silencer 4. Earth flats for body and neutral. 5. Necessary Cables 6. Safety equipments 7. Ms angles will be measured & paid as per actuals as per site condition 8. Exhaust stack etc.
1
-
-
... More
Design, Manufacture, Transportation, Supply, Installation, Testing and Commissioning of radiator water cooled 50 KVA DG set, 1500 rpm, four stroke,designed for operating on 415V, 50 Hz, 0.8 pf, complete with all accessories, like base frame, fuel tank of 990 litres,batteries 12V or 24V suitable for starting of the DG Set with standard control panel and includes the following transport, insurance, handling, safe keeping at site etc., erection, installation, testing and commissioning including performance tests as per Specifications. The necessary foundation will be provided by other agency. The rate shall also include the following 1. Acoustic enclosure, 2. Isolator panels if required 3. Silencer 4. Earth flats for body and neutral. 5. Necessary Cables 6. Safety equipments 7. Ms angles will be measured & paid as per actuals as per site condition 8. Exhaust stack etc.
1
-
-
... More
SCHEDULE- IV - UPS SYSTEMS
-
-
-
... More
Supply, Installation, Testing and commissioning of 15KVA UPS system 3 phase input and three phase output andas per the specification. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
2
-
-
... More
i. Supply, Installation, Testing and Commissioning of 12V, VRLA (SMF) Sealed Maintenance Free Batteries to support 15KVA UPS for 30 minutes complete with intercell connectors & copper cables, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries.
-
-
-
... More
Supply and laying of 2mm thick 1000mmx2000mm wide chequered rubber mat with ISI mark suitable for 11KV installation .(IS 15652)
5
-
-
... More
Supply and laying of 2.5mm thick 1000mmx2000mm wide chequered rubber mat with ISI mark suitable for 11KV installation .(IS 15652)
10
-
-
... More
Providing pair of rubber hand gloves suitable for working on 11 KV supply.
1
-
-
... More
Supply and fixing of LT cable route indicator made out of MS flat and angle iron. The cable route marker shall be fixed at both the ends of cable at joints and 15mtrs spacing for straight runs. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
5
-
-
... More
Supply and providing shock treatment chart in English and Hindi duly framed with 2mm thick glass in front & 6mm thick ply on back as required etc.complete complying with standard specifications and as directed by SIPCOT Officers.
5
-
-
... More
(PART C) CONSTRUCTION OF 2.00LL UNDER GROUND SUMP
-
-
-
... More
Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m for foundation including shoring, strutting wherever necessary including hand bailing out water and all other incidental charges. etc. complete complying wit. Hard stiff clay,stiff black cotton soil, hard red earth, shales, murams, gravel, stoney earth, and earth mixed with 50% fair size boulders and hard gravelly soil -SS20B complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
0-2.0 m depth
175
-
-
... More
2.00-3.00m depth
88
-
-
... More
Supplying and filling in foundation and basement with filling crushed stone sand in layer of not more than 150 mm thickwell rammed watered and consolidated etc.complete complying with standard specifications and as directed by SIPCOT Officers.
14
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
14
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).,complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
Below GL & upto 1.5 m
57
-
-
... More
Above G.L
21
-
-
... More
Supplying, fabricating and placing in position of RTS rods Fe500 at all heights for reinforcement including the cost of steel and binding wire, labour charges etc., complete for all RCC works and ascomplete complying with standard specification and as directed by SIPCOT officers.
70.2
-
-
... More
Centering for sides and soffits of R.C.C slab for plane surface / curved surface including strutting upto required height using MS sheets of size 90cmx60cm and BG 10 gauge, stiffend with welded MS angle of size 25mmx25mmx3mm laid over silver oak (country wood) joists of size 10cmx6.5cm (space at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification etc.,complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
Plain surface
83
-
-
... More
Curved surface
230
-
-
... More
Circular surface
2
-
-
... More
Supplying and fixing in position Manhole cover 60 x 60 cm (heavy duty) with frame of best approved quality as per standard specification etc., complete complying with standard specifications and as directed by SIPCOT officers
2
-
-
... More
Supply and fixing of A.C. Cylindrical Cowl - 100mm dia complete complying with standard specification and as directed by SIPCOT officers.
4
-
-
... More
Supplying and fixing in position of RCC M25 in side access lader of following size using 20mm size HBS jelly including cost of all materials,centring, shuttering, strutting, fabrication and placing in position of reinforcement, finishing, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supplying and fixing in position ofoutside MS Lader of 45cm clear wide made out of 50mm x 50mm x 12mm MS Angle for sides and steps in 16mm MS plainrods fixed at 30cm c/c welded jointed etc, providing with suitable side supports,clamps, locking arrangements provided with two coats of approved enamal paint over one coat of red oxide paint to access over roof top including bottom anchorage with bed block in CC1:2:4 using 20mm HBS at top and bottom of sump with suitable anchor bolt and transportation charges etc., complete complying with standard specification and as directed by SIPCOT officers.
3
-
-
... More
Providing and fixing of cut stone (Rough dressed) set in CM 1:3 of size 0.45 X 0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Refilling the outside of the sump with excavated earth(other then sand) complying with standard specification for filling the foundation including watering consolidation etc.complete complying with standard specifications and as directed by SIPCOT Officers.
95
-
-
... More
Painting two coats with approved cement paint over one coat of priming coat over cement plastered exposed surface of the Reservoir including cleaning, preparing the surface and curing etc.complete complying with standard specifications and as directed by SIPCOT Officers.
47
-
-
... More
Labour charges for Painting SIPCOT Board Emblem in accordance with the size and specifications as approved by the Board on the Service Reservoirs including cost of all consumables, one coat of base paint, scaffolding charges including painting NRDWP Logo on the Service Reservoirs etc.complete complying with standard specifications and as directed by SIPCOT Officers.
4
-
-
... More
(PART D) PROVIDING PUMPING MAIN ARRANGEMENTS.
-
-
-
... More
Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984
with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Duty is 400 lpm x 25 m head
2
-
-
... More
Supply and delivery of D O L Starter Confirming to IS 13497,IEC60947 Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and
as amended thereafter with suitable KW rating for operation in AC/Three
Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal
Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection,
Indication lamp, starting capacitor, running capacitor and On/Off Push button
switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated
cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Suitable for 3HP Motor
2
-
-
... More
Supply and delivery of 150 mm dia. Pressure gauge suitable for above pumpsets on delivery side to be erected after the valves including required sprcials and ringstop levelcock etc., complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
For Pump room pumpsets
1
-
-
... More
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing mersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
2
-
-
... More
Supply, delivery, erection, testing and commiossioning of SWITCH DISCONNECTOR FUSE UNITS IN SHEET STEEL ENCLOSURE (SDF) 63 ampsTPN Switch disconnector fuse units in sheet steel enclosure with HRC Fuses double break. etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Supply, delivery of following size of 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 WITH ISI MARKING etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
3.5 core x 50 Sq.mm. (From DOL STARTER to to each OPEN WELL motor )
20
-
-
... More
Labour charges for Laying the following sizes of cables from EB supply to kiosk board through LT metering as per IE rules etc., complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
3.5 core x 50 Sq.mm. (From M V Panel to to each motor connections - pump room)
20
-
-
... More
Labour charges for Jointing the following sizes of UG cable including cost of jointing materials etc.complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
3.5 core x 50 Sq.mm. (From M V Panel to to each motor connections - pump room)
2
-
-
... More
Supply, delivery and fixing in position of following medium voltage power capacitor electric as per IS 2384 suitable for 415 v - 3 phase, 50Hz, AC supply, etc.complete complying with standard specifications and as directed by SIPCOT Officers.
2
-
-
... More
Supply and fixing of G.I. earthing system comprising of 50mm dia and 2m long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable for 3HP.
-
-
-
... More
For Pump room pumpsets 3hp
2
-
-
... More
Supply and delivery of following safety appliances including all taxes, duties, and handling charges etc., complete complying with standard specifications and as directed by SIPCOT Officers.
-
-
-
... More
Electrical gloves tested to 11 KV/22 KV with wooden box with French chalk powder.
1
-
-
... More
Electrical quality 6 mm thick rubber mat
1
-
-
... More
5 Kg capacity ISI marked Dry chemical powder fire extinguisher
1
-
-
... More
Fire buckets – 3 Nos. Hooked to MS stand
1
-
-
... More
Laminated shock Treatment chart
1
-
-
... More
Wooden First Aid Box
1
-
-
... More
Rechargeable Emergency lamp( 600mm fluorescent lamp)
1
-
-
... More
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
Provision for LT/LTCT METERING BOX as per IE rules and TANGEDCO norms Up to 50HP/37 KW (which includes LT meter panel board, 6 Nos. suitable fuse
carriers etc.complete complying with standard specifications and as directed by SIPCOT Officers.
1
-
-
... More
(PART E) CONSTRUCTION OF COMPOUND WALL
-
-
-
... More
Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc.complete complying with standard specifications and as directed by SIPCOT Officers. (including refilling)
-
-
-
... More
Column Footing (0 to 2 mtr)
201
-
-
... More
Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc.complete complying with standard specifications and as directed by SIPCOT Officers.
12
-
-
... More
Providing and laying plain cement concrete mix 1:3:6 (One cement, Three M.sand and Six aggregates) for foundation using 20mm ISS size HBG stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed consolidated and curing etc, complete complying with Standard specification including cost and conveyance of all materials to site and as directed by SIPCOT Officers.
12
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards etc., complete complying with standard specifications and as directed by SIPCOT Officers. (Footing, Column Pedesal & Grade beam.)
58
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/mᶾ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards etc., complete complying with standard specifications and as directed by SIPCOT Officers. (Coping Beam, Column)
34
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers.
a. Form work for Plinth beam, Grade beam, Raft beam
-
-
-
... More
Column Pedesal & Grade Beam.
523
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc., Complete complying with standard specification and as directed by SIPCOT Officers.
-
-
-
... More
Column
301
-
-
... More
Brick work in Cement Mortar 1:5 (One Cement and Five M-sand) using best quality II class Ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" including cost and conveyance of all required materials at site, labour charges and curing etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
Compound wall
17
-
-
... More
Damp proof course with Cement Mortar 1:4 (One Cement and Four Crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
Compound wall, d/F Slideing gate & D/F wicket gate
693
-
-
... More
Plastering with CM 1:5 (One of cement and five of crushed stone sand) 12mm thick finishd with neat cement including providing band cornice, ceiling cornice, curing scaffolding etc., complete complying with standard specification and as directed by SIPCOT officers. Compound wall, Column sides portion, Column Top side, Top portion of wall, d/f Slideing gate & D/F wicket gate.
1755
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Exterior plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by SIPCOT officers.
1755
-
-
... More
Supplying, fabricating and placing in position of Ribbed Tor Steels Fe500 for reinforcement for all floors including cost of binding wire, bending, tying etc., complete complying with standard specification and as directed by SIPCOT officers.
7
-
-
... More
SlidingGate:
-
-
-
... More
Motorised Sliding Gate
Fabrication, supply and erection of MS Motorised Telescopic Sliding Gate with following specifications etc., complete complying with standard specification and as directed by SIPCOT officers. Entry / Exit Gate
20
-
-
... More
Gate shall be made of 72 x 72 mm x 3.0 mm thick hollow tubes, verticals 25 x 25 x 2.5 mm thick square tubes @ 165 mm c/c and 25 x 6 flat for top Arch and bottom diamond with 75 x 10 mm Flat horizontal 3 nos. Wheel EN 8 Single Groove wheel 2 Nos. with double ball bearing. Track / Rail MS flat 75 x 10 mm base with 1" square MS single rod rail and ISA 35 x 35 x 6 Edging angle. Guide Rollers - 2 SetsNecessary Nylon guide rollers with Gunmetal bush bearing shall be fixed with bolts to the Arm of the box channel post. Guide Post ISMC 150 x 75 mm box channel post 2.0 Mtr. High with necessary insert plate complete - 12 Nos. Finish Two Coat of PU Paint over one coat of Zinc primer in required DFT of (dense film thickness) for each coat in total DFT of 60 microns Pattern : Standard Mild Steel square hollow tubular section, torsion free fully welded unit Gate frame: M.S. pipe top/botom horizontal & vertical profile Infills:The infills are to be fully welded between the upper & lower gate frame Cladding:(Optional if any applicable as per gate design) Bottom rail :C channel & 20mm round polished bar Bottom rollers :Italian make Galvanised Wheels 120mm dia. with ball bearings and axle with lubrication point Guide Post Full height column ;Galvanised adjustable upper guide brackets with pair of guide post constructed from a steel square hollow section profile Guide rollers;Nylon Rollers with bearings mounted on both side of column providing lateral support & smooth movement to the gate leaf
-
-
-
... More
Fabricate, supply, erect and commission of steel wicket gate of size 1.0m x 1.8m ( 2 No.s) to the specification shown in the drawing including providing locking arrangements, hold fast etc. all as directed by the Enginer-in-Charge. The gate shall be painted with Two Coat of PU Paint over one coat of Zinc primer in required DFT of (dense film thickness) for each coat in total DFT of 60 microns of approved colour and shade including fixing in steel stanchions, etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
Gate Size - 1.20 m wide, 1.5 m height, ENTRY / EXIT GATE
2
-
-
... More
(PART G) CEMENT CONCRETE ROAD.
-
-
-
... More
Sectioning and levelling of roadway in OG Soil using manual means with initial lift and lead etc., complete complying with standard specification and as directed by SIPCOT officers.
117
-
-
... More
Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.
78
-
-
... More
Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- III of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.
78
-
-
... More
Laying of CEMENT CONCRETE(1:4:8) USING 40mm HBG STONE METEL including cost and conveyance of all materials, labour charges and curing etc., complete complying with standard specification and as directed by SIPCOT officers.
117
-
-
... More
Laying of Plain cement concrete pavement as per design mix M20 using 12mm and 20mm HBG Machine Crushed Metal, with side formwork, over 125 microns thick Polythene sheet including cost and conveyance of all materials, labour charges,centreing and curing etc., complete complying with standard specification and as directed by SIPCOT officers.
117
-
-
... More
Supply, delivery and fixing of Mastic Pads of 12.70 mm thick including cost and conveyance and labour charges etc., complete for expansion joints. etc., complete complying with standard specification and as directed by SIPCOT officers.
8
-
-
... More
PRECAST Plain cement concrete (P.C.C )KERB STONE 600x600x100mm etc., complete complying with standard specification and as directed by SIPCOT officers.
300
-
-
... More
(PART H) STP - CIVIL, MECHANICAL & ELECTRICAL.
-
-
-
... More
Earth work excavation for Open Foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary. (Excluding refilling the sides of foundation) and depositing the earth in places shown clearing and levelling the site with an initial lead of 10 metres and lift as specified hereunder etc., complete in all respects complying with relevant Standard specifications etc., complete complying with standard specification and as directed by SIPCOT officers.(Excluding Refilling).
-
-
-
... More
0 to 2m depth.
425
-
-
... More
Earth work excavatoin 2 TO 3m with additional lift of 1 m
183
-
-
... More
Supplying and filling in foundation and basement with filling sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant Standard specification including cost of supplying filling sand.etc., complete complying with standard specification and as directed by SIPCOT officers.
24
-
-
... More
Supplying and filling in foundation and basement with gravel in layers of 150mm thickness well watered , rammed and consolidated complying with relevant standard specification including cost of gravel etc., complete complying with standard specification and as directed by SIPCOT officers.
6
-
-
... More
CC 1:4:8 (One of cement, four of M sand and eight of hard broken stone Jelly) for foundation using 40 mm gauge broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
26
-
-
... More
M20 grade Concrete for all reinforced cement concrete works, namely plinth beams/column/tie beams, column footings, slab using 20mm gauge hard broken stone jelly excluding the cost and fabrication of reinforcement grills, shuttering and centering but including, vibrating, laying, curing, with etc., complete complying with standard specification and as directed by SIPCOT officers. in Foundation and Basement.
-
-
-
... More
Foundation and Basement
111
-
-
... More
Ground floor
5
-
-
... More
Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height for plane surfaces as detailed below with all cross bracings using mild steel sheets of size 90cm x 60cm and MS 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak or country wood joists of size 10cmx6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced at 75cm intervals and removing the same after a specified period without damaging the R.C.C works etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
For Column footings, plinth beam, Grade beam, Raftbeam,Raft slab etc.,
22
-
-
... More
Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sillslab, staircase waist, portico slab and other similar works
19
-
-
... More
For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.
36
-
-
... More
For Vertical walls
801
-
-
... More
Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels for reinforcement for all floors including cost of binding wire, bending tying and without cement slurry etc., complete complying with standard specification and as directed by SIPCOT officers.
10
-
-
... More
Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc., complete complying with standard specification and as directed by SIPCOT officers.
660
-
-
... More
Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost etc., complete complying with standard specification and as directed by SIPCOT officers.
13
-
-
... More
Brick work in cm 1:5 (One of cement and five of M sand) using chamber burnt bricks of size 9”x4½”x3” (23x11.4x7.5 cm) in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
3
-
-
... More
Brick work in Cement Mortar 1:6 (One of cement and six of M sand) using Chamber burnt bricks of size 9”x4½X3” (23x11.4x7.5cm) for super structure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
In Ground Floor
12
-
-
... More
Plastering the top of flooring in cm 1:4 (One of cement and four of sand) 20mm thick including surface rendered smooth including providing proper slopes, thread lining, curing and 150mm wide skirting alround with the same cement mortar etc., etc., complete complying with standard specification and as directed by SIPCOT officers.
437
-
-
... More
Plastering with cm 1:3 ( one of cement and three of sand ) 12 mm thick mixed with water proofing compound ( CICO ) at the rate of 2 kg / 10 sq.m including curing etc., all complete complying with relevant standard specifications etc., complete complying with standard specification and as directed by SIPCOT officers.
172
-
-
... More
Special ceiling plastering in cement mortar 1:3 (One of cement and three of sand) 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors finished with neat cement including hacking the areas, providing band cornice, scaffolding, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
19
-
-
... More
Plastering with cm 1:5 (One of cement and five of sand) 12mm thick finished with neat cement including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete complying with standard specification and as directed by SIPCOT officers.
120
-
-
... More
Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellis Pattern Flooring (No Sand) and surface rendered smooth including 150mm wide skirting, providing proper slopes, thread lining, curing etc., complete complying with standard specification and as directed by SIPCOT officers.
33
-
-
... More
White washing three coats using clean shell lime slaked including cost of lime, gum, blue, brushes, including scaffolding etc., complete complying with standard specification and as directed by SIPCOT officers.
16
-
-
... More
Painting the new walls with two coats of oil bound distemper of approved brand over cement plastered wall surfaces including cost of paints, putty, brushes, watering, curing, etc., complete complying with standard specification and as directed by SIPCOT officers.
47
-
-
... More
Painting two coats of Plastic Emulsion paint over one coat of white cement paint over of first quality including the cost of cement paint, brushes, scaffolding etc., complete complying with standard specification and as directed by SIPCOT officers.
74
-
-
... More
Supplying and fixing of 110mm dia PVC SWR pipe for Rain water down fall pipe with necessary gratings, shoes, bends, off sets, clamps, teak woods plugs, and of approved quality and including fixing C.I. gratings at the junction of parapet and floor or roof slab etc., including finishing etc., complete complying with standard specification and as directed by SIPCOT officers.
4
-
-
... More
Filling in basement with 40mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., complete complying with standard specification and as directed by SIPCOT officers. (For filter media)
1
-
-
... More
Filling in basement with 20mm size hard broken jelly in drying beds in other similar works including cost of materials, labour charges etc., complete complying with standard specification and as directed by SIPCOT officers. (For filter media)
3
-
-
... More
Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, 1.1 K.v. grade cable with continuous earth by means of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming to IS: 694/1990, 1.1 K.v. grade cable in fully concealed PVc rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16 g thick concealed and covered with 3mm thick laminated hylem sheet controlled by 5 amps flush type switch including circuit mains cost of all materials, specials etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
a) Light point with ceiling rose
3
-
-
... More
b) Light point without ceiling rose
5
-
-
... More
Wiring with 1.5 sqmm copper P.V.C. insulated unshealthed single core 1.1.k.v. grade cable with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1.k.v. grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for Fan point controlled by 5 amps flush type switch including circuit mains cost of all materials, specials, etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Wiring with 1.5 sqmm copper P.V.C. insulated unsheathed single core 1.1.k.v. grade cable with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1.k.v. grade cable in fully concealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for 5 amps. 5 pin plug socket point at convenient places including circuit mains cost of all materials, specials, etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Wiring with 1.5 sqmm copper P.V.C. insulated unsheathed single core 1.1.k.v. grade cable with continuous earth by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1.k.v. grade cable in unconcealed PVC rigid conduit pipe heavy duty with ISI mark with suitable size TW box of unconcealed and covered with 3mm thick laminated hylem sheet for 5 amps 5 pin plug socket point at Switch Board Itself including circuit mains cost of all materials, specials, etc., complete complying with standard specification and as directed by SIPCOT officers. (open wiring)
1
-
-
... More
Earthing as per the ISI specification with an earth electorde of 2.85m class'B' GI pipe of dia not less than 40mm,with copper earth plate of size 125mmx50mmx6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Charges for assembling and fixing of ceiling fan of different sweep with necessary connectios and fixing of fan regulator on the existing board etc., all complete and as directed by the departmental officers.(Excluding of fan) etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supplying and delivery of following electicals ceiling fan with ISI mark with blades and doubles ball bearing, capacitor etc., complete with 300mm down rod, canopies, capacitor, shackle blades with speed regular (resistence type) suitable for operation on 230 volts 50 htz single phase AC supply conforming to ISI on 374/79 and provided with insulation etc., complete complying with standard specification and as directed by SIPCOT officers.(the brand should be got approved from the SIPCOT Officer)
-
-
-
... More
48" Electical Fan 1200 mm sweep
2
-
-
... More
MECHNICAL AND ELECTRICAL
-
-
-
... More
Supply and delivery of bar screening system fabricated in SS 304 in 2 mm tk, the box size of 10 feet X 2 feet X 2 feet -1no.SS 304 in 2 mm tk, the hole size of 8 mm Dia, removing type plate try to easy cleaning.5 feet X 2 -4no. the fabricated set pickled with anti corrosive reagents as per recation/ coating procedure (SS 304–Secondary screening set) with the following specifications inclusive of all incidental charges, taxes, transport to site, loading, site, unloading etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and delivery with fixing accessories of Collection Pumps including electrical items and auto level controller to safe guard the dry run (or) over heating for pumping the Raw sewage from collection tank to aeration tank with the following specifications inclusive of all incidental charges, taxes, loading, conveyance to site, unloading etc., all complete and as directed by the departmental officers material of construction cast iron body material of construction shaft / impeller cast iron discharge 10 m3 per hour, head 10m (total head) type - Submersible pump with cutter mechanism solid handling size of 50mm all etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and delivery with fixing accessories of Air pipe line in collection tank for air distribution with the following specifications inclusive of all incidental charges, taxes, loading conveyance to site, unloading etc., all complete and as directed by the departmental officers, material of construction UPVC and MS material of construction to discharge of 90 m3 (max) per hour of air, total pressure of 4 kg/cm2 with standard specification and with proper and suitable accessories for erection. etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and delivery with fixing accessories of Air blowers including electrical and other accessories for aeration tank for treatment of sewage water with the following specifications inclusive of all incidental charges, taxes, transportation, loading, unloading to site, etc., all complete and as directed by the departmental officers, material of construction cast iron body material of construction to discharge of 260 m3 per hour of air, total pressure of 0.4 kg/cm2 with suitable motor and all complete complying with standard specification and with proper and suitable accessories for erection. etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and delivery with fixing accessories of Air pipe line in aeration tank for air distribution with the following specifications inclusive of all incidental charges, taxes, loading conveyance to site, unloading etc., all complete and as directed by the departmental officers, material of construction UPVC and MS material of construction to discharge of 260 m3 per hour of air, total pressure of 0.4 kg/cm2 with standard specification and with proper and suitable accessories for erection, etc., complete complying with standard specification and as directed by SIPCOT officers. (The quality and brand shall be got approved from the SIPCOT Officer before use)
1
-
-
... More
Supply and delivery with fixing accessories of Sludge Transfer Pumps for pumping the sludge from clarifier tank to aeration tank with the following specifications inclusive of all incidental charges, taxes, loading, conveyance to site, unloading etc., all complete and as directed by the departmental officers material of construction cast iron body material of construction shaft/impeller cast iron discharge 10 m3 per hour, head 15m (total head) type - submersible pump with sludge handling with mechanical seal 50 HZ + 415 volts 3 phase motor of suitable HP etc., all complete complying with standard specification and with proper and suitable accessories for erection. etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and delivery with fixing accessories of Clarifier Ø 2.06m central driven type motor primary speed reduction gearbox secondary speed reduction drive head heavy duty motor and gear box is connected with lovejoy coupling overload sharpen mechanism, centre shaft MS Fabricated scrapper ARM mechanism of 4 RPH (speed 40 M/Min TIP velocity) direction of rotation clockwise with neoprene rubber, Ø 1.5m X 2.5m height SS304 fabricated feed well, all hard wares will be in GI, all MS parts will be given one coat of epoxy zinc phosphate primer and two coats of epoxy finish painting inclusive of all incidental charges, taxes, loading, conveyance to site unloading eetc., complete complying with standard specification and as directed by SIPCOT officers. (The quality and brand shall be got approved from SIPCOT Officer before use)
1
-
-
... More
Supply and delivery with fixing accessories of Filter Feed Pumps for feeding the clarified water from clarified water storage tank to filters with the following specifications inclusive of all incidental charges, taxes, transport to site, loading, site, unloading etc., all complete and as directed by the departmental officers, material of construction last iron body material of construction shaft / impeller cast iron discharge 20m3 per hour head 15M (total head) type - Submersible pump, and all complete complying with standard specification and with proper and suitable accessories for erection. etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and delivery with fixing accessories of Pressure Sand Filter of capacity 20m3 per hour to filter the suspended matter escaped from the clarifier and present in the sand filter of shell size Ø 1.0 x 1.5M hos fabricated out of 6 & 8 mm thick plate with dished end and Ø 0.5M manhole with proper back wash arrangements, cover, strainers, distribution to be provided inlet and outlet. All flanges in inlet and outlet connections shall confirm IS:15328 necessary valves, pressure gauges, fittings to be provided the filter shall be hydro tested to 5 KG / CM2 for duration of 2 hours. Entire sand filter shall be painted with one coat of epoxy zinc phosphate primer and two coats of epoxy finish paint inclusive of all incidental charges, taxes, loading conveyance to site unloading etc., all complete and with proper and suitable accessories for erection, etc., complete complying with standard specification and as directed by SIPCOT officers.(The quality and brand shall be got approved from SIPCOT Officer before use)
1
-
-
... More
Supply and delivery with fixing accessories of activated carbon filter of capacity 20M3 per hour to filter the suspended matter escaped from the clarifier and present in the sewage sand filter of shell size Ø 1.0 x 1.5M hos fabricated out of 6 & 8mm thick plate with dished end and Ø 0.5M manhole with proper back wash arrangements, cover, strainers, distribution to be provided inlet and outlet. All flanges in inlet and outlet connections shall confirm IS:15328 necessary valves, pressure gauges, fittings to be provided the filter shall be hydro tested to 5KG/CM2 for duration of 2 hours. Entire sand filter shall be painted with one coat of epoxy zinc phosphate primer and two coats of epoxy finish paint inclusive of all incidental charges, taxes, loading conveyance to site unloading etc., all complete and with proper and suitable accessories for erection. etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supplying and delivery with fixing accessories of Ultra Violet System (4 lamp system) for the STP treated outlet to disinfection in accordance with the relevant standard specification inclusive of all incidental charges taxes, loading conveyance to site unloading etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and delivery with fixing accessories of Electrical Control Panel Board for the STP with total load, inter connection wiring to all starters, suitable capacitors, as per relevant specifications. The starters of DOL/Star delta type consisting contactor, over load relay etc. Panel made of 1.8mm thick CR sheet with power coated shall be provided with the following. Incoming Isolator, bus bars, ammeter, voltmeter with selector switches, one set of indication lamps. Remote control provision for all starters etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Erection and commissioning of STP of 100 KLD capacity including erection of all mechanical equipments, control devices with necessary tools and tackles etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and delivery with fixing accessories of Electromagnetic flow meter, Flow Tube sensor, Digital flow transmitter LCD display, Flow range 33.10 LPS(max), 2.41 LPS(Min), power rate 240 watts with all incidental charges, taxes, loading conveyance to site unloading etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and delivery with fixing accessories of MBBR Media, isolated organisms, filming ,chocked with higher media solutions Type : hexagon , 8 segments ,rough liner Inoculums: Aerobic stains at 26 days preservation at 26-28 oC (mesophilic conditions),non specified ratio in F/M,MCRT.& F/M based HRT.Method of isolation : isolation by pore plate technique & cultivation in aeration tank organisms,( Bi-environmental conditions ) with the following specifications inclusive of all incidental charges, taxes, loading, conveyance to site, unloading etc., complete complying with standard specification and as directed by SIPCOT officers.
10
-
-
... More
Supply and delivery of Media blocker screening system fabricated in SS 304 in 2 mm tk at dia of 10 " length of 8 feet each hole size 12 mm, the fabricated set pickled with anti corrosive reagents as per recation/ coating procedure with the following specifications inclusive of all incidental charges, taxes, transport to site, loading, site, unloading etc., complete complying with standard specification and as directed by SIPCOT officers.
4
-
-
... More
(PART I) SOLAR PLANT - GRID CONNECT SOLOR PV SYSTEM 150KWp
-
-
-
... More
SOLAR POWER PLANT ONGRID SYSTEM:116 KWp Various Components Technical Specification a) Solar Photovoltaic Module as Per MNRE Standards SPV Panel Specification: 116Kwp – Model-540Wp (214 nos),Open Circuit voltage (Voc)- 37.3V, Short Circuit Current(Isc)-8.6A, Voltage maximum(Vmax)-33.06V,Current maximum(Imax)- 8.03A, Maximum power at STC 25’C(Pmax)-330W, Maximum system voltage-1000V, Operating Temperature/Humidity- 20’c to 90’c/85%, Solar Cell-72 Polycrystalline silicon cells, Module Dimensions-1968mm X 995mm X 45 mm, Module Weight 21 Kg, Oblong Hole 9mm X 13 mm, Terminal Box- IP 65, Bypass Diode-20 A, 1000 V, Cable & Connectors- 4 sqmm/MC4 b) Solar Ongrid Inverter: Solar Ongrid inverter with inbuilt Solar optimizer, MPPT charge controller Capacity – 120 KW.
c) Mounting Structure & Electrical Accessories Mounting structure design with GI Material to withstanding Wind velocity up to 100 km / hr, Structure material - galvanized steel with Bolts, nuts, fasteners for panel mounting Electrical Materials DC & AC Cables, MC4 Connectors, and ALL BOS Required for the SPV Power Plant as Per MNRE Norms etc., complete complying with standard specification and as directed by SIPCOT officers.
116
-
-
... More
(PART J) FIRE FIGHTING AND PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supply, installation, testing & commissioning of Nicro Processor based conventional 12 zone fire alarm control pannel having he rating of 24Volt DC power supply, consisting 230/24 volt SMPS unit. 2 Nos. of 12 volt, 7AH stand by batteries, suitably mounted on wall using fixing accessories like screws, Plug, Clamps. etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply, installation, testing & commissioning of" conventional smoke detector suitably mounted on ceiling with M.S.junction box/False ceiling using fixing accessories like screws, plugs. etc., complete complying with standard specification and as directed by SIPCOT officers.
128
-
-
... More
Supplying, fixing, testing and commissioning of Manual Call Points providing on wall usings fixing accessories like screws, plug, clamps. etc., complete complying with standard specification and as directed by SIPCOT officers.
20
-
-
... More
Supplying, fixing, testing and commissioning of Electronic hooter/Sounder providing on wall usings fixing accessories like screws, plug, clamps. etc., complete complying with standard specification and as directed by SIPCOT officers.
20
-
-
... More
Supply and Laying of 2 core 1.5Sqmm armoured copper cable in wall with suitable size GI clamps screws wooden plug end termination by using suitable size calble. etc., complete complying with standard specification and as directed by SIPCOT officers.
3000
-
-
... More
Supply Erection, testing and commissioning of fire fighting application Mono block motor pump set of 900LPM at 40Mtrs head to develop 3.5Kg/Sq.cm at the heighest and farthest hydrant point to make 30m water jet at the time of fire fighting emergency sircumstances coupled with 11KW/15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast iron body, bromze impeller , rope gland packing, suction size of 80mm dia. delivery size of packing, suction size of 80mm dia, delivery size o f65mm dia., including the cost of foundation concrete anti vibration mountings. etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply, erection and commissioning of Fire fighting electrical control pannel of 15Hp, 415 Volts , 50hz rating wall mounted type facbricated using CRCA sheet, hinged locakable door, dust and vermin proof with following provisions: a. 63 Amps, 4 pole MCB -Incomer, 6 Amps, 2 pole MCB for control circuit-1 Set b.RYB Phase Indication lamp, Volt meter(0-500V), Ammeter (0-50A), Volt meter selector switch 1 Set c.32 Amps power contactor with 230 V coil, 14-23 Amps over load relay-1 Set d.Singlw Phase preventor-1No e.Indication lamp for motor ON/OFF/TRIP-1 set f.AUTO/MANUAL selector switch, ON/OFF Push Button-1Set g.Add on Block, terminal block, Power Wiring, Control Wiring , Connectors, Cable lgs etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supplying, installing, testing and commissioning of M.S. C class Pipes confirming to IS 1239 Pt - with painting ( 1 coats of Redoxide primer and 2 coats of PO Red Paint ), etc., complete complying with standard specification and as directed by SIPCOT officers.
-
-
-
... More
100 NB MS C Class Pipe
312
-
-
... More
80 NB MS C Clas Pipe
6
-
-
... More
25 NB MS C Clas Pipe
6
-
-
... More
Supply and fixing of water ABC 6 kg capapcity fire extinguishers as per new IS 15863 complete with control valve, cap, pressure guage, operation sticker, discharge hose, wall mounting bucket , safety clip, etc., complete complying with standard specification and as directed by SIPCOT officers.
30
-
-
... More
Supply and fixing of Carbon-di-Oxide Gas Type 4.5 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., complete complying with standard specification and as directed by SIPCOT officers.
15
-
-
... More
Supply , installation of fire fighting application 180 degree swinging type , Hose reel drum with 20mm dia braided thermoplastic hose of 30m long, so as to extend to necceassary distance by self rolling spindle wheel including necessary and open and close spray nozzle, warm clip etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve. etc., complete complying with standard specification and as directed by SIPCOT officers.
12
-
-
... More
Supply of fire fighting application MS hose box to keep two number of Hoses and 1 No of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside post office red. etc., complete complying with standard specification and as directed by SIPCOT officers.
12
-
-
... More
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points etc., complete complying with standard specification and as directed by SIPCOT officers.
24
-
-
... More
Supplying and fixing of fire fighting application oblique typr stainless steel hydrant valve of size 63mm dia with oblique type instaneous coupling with rotating wheel open and close the valve including MS flange of table E bolts and nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building etc., complete complying with standard specification and as directed by SIPCOT officers.
12
-
-
... More
Supply and fixing in position of fire fighting application 63mm dia stainless steel short length branch pipe with hexagonal type spray nozzle of 15mm or 20mm jet bore. Near every hydrant points including necessary scaffolding and re-doing the dismantled portions to iyts original condition wherever found necessary, etc., complete complying with standard specification and as directed by SIPCOT officers.
12
-
-
... More
First Aid box with all accessories
20
-
-
... More
4 Nos of Fire Buckets made out of 40x40x6mm MS Angle etc., complete complying with standard specification and as directed by SIPCOT officers.
20
-
-
... More
Supply and Erection of MS Supports etc., complete complying with standard specification and as directed by SIPCOT officers.
200
-
-
... More
Supply and Erection of 100 NB Butterfly valve etc., complete complying with standard specification and as directed by SIPCOT officers.
4
-
-
... More
Supply and Erection of 100 NB NRV etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and Erection of Pressure Guage etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and Erection of Pressure Switch etc., complete complying with standard specification and as directed by SIPCOT officers.
1
-
-
... More
Supply and Erection of Air release valve etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
Supply and Erection of 25 NB Ball Valve etc., complete complying with standard specification and as directed by SIPCOT officers.
14
-
-
... More
Supply and Erection of 15 NB Ball Valve etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
(PART K) PROVIDING LAN NET WORK
-
-
-
... More
Supply and run of 4 Pair unshielded twisted pair (UTP) LAN (Computer) CAT 6 Cable in Existing Race ways, Hume Pipes, PVC Conduits, Flexible PVC Hoses Etc.,(For Data Communication cables). Make : Belden/Comscope
16000
-
-
... More
Supply and fixing of 2 Nos I/O Socket (RJ 45) Modular type with PVC Modular Box with PVC Modular Face plate. Make : Belden/Comscope
450
-
-
... More
Supply and run of 4 Pair unshielded twisted pair (UTP) LAN (Computer) CAT 6 Cable in suitable gauge MS conduit pipe on wall and ceiling. (For Data Communication cables). Make : Belden/Comscope
850
-
-
... More
Supply and installation of CAT 6 Patch Cord of 2 Mtr length, pre- terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots. Make : Belden/Comscope
900
-
-
... More
Supply and Installation of cat 6e patch panel 24 port fully loaded rack mount type 4 pair unshielded twisted cable termination unit Make : Belden/Comscope
2
-
-
... More
Supply and Installation of OFC MM 6 core outdoor cable suitable with accessories etc. Make : Belden/Comscope
700
-
-
... More
Supply and fixing of Rack mount OFC Single mode LIU 12 port OFC pigtails core termination pigtails duplex coupler connecting plate etc.
4
-
-
... More
Supply and Installation of OFC MM mode Patch cord 2 Mtrs
10
-
-
... More
Supply and Installation of 100 x 50 MK channel
100
-
-
... More
Supply and Installation of 50 x 50 MK channel
100
-
-
... More
50mm PVC flexible hose
90
-
-
... More
Supply and Installation of 27U Rack Floor Mount Rack with accessories cooling fan, power supply 5/15amp 6socket with MCB hardware packet suitable cable manager and etc.
4
-
-
... More
Labelling ,Testing ,commissioning ,documentation project Management ,Network Rack dressing work accessories materials and etc.
4
-
-
... More
NET WORK SWITCH
-
-
-
... More
C9200L-48T-4X-E 48 Port Gigabit non POE Access Switch having 48 Nos. of 10/100/1000 Ethernet Ports & should support a minimum 2 Nos of 10 Gig SFP+, populated with 2 Nos. of 10 Gig SR SFP+3 YEARS software &Hardware Support 3 years DNA licence
1
-
-
... More
C9200L-24T-4X-E 24 Port Gigabit non POE Access Switch having 24 Nos. of 10/100/1000 Ethernet Ports should support a minimum 2 Nos. of 10 Gig SFP+, populated with 2 Nos. of 10 Gig SR SFP+3 YEARS software & Hardware Support 3 years DNA licence
2
-
-
... More
Cisco 10G SFP MM
8
-
-
... More
Switch installation Post, Mounding configuration , migration, charges
8
-
-
... More
Cisco AP 9100 with mounding Bracket ,Embedded controller for active and passive 3 YEARS software & Hardware Support 3 years DNA licence
8
-
-
... More
Cisco Wi-Fi 9100 and bracket Installation, Configuration, and migration swapping. Documentation
8
-
-
... More
Total IT Devices Performance and status monitoring with Support of incident Ticketing software to support 1000 end users licences.Network L3 Traffic monitoring for routers and L3 switches,1000 Asset & online Inventory management with Dashboards.Supporting of Map with Building Layout dashboards150 Switch’s & Multiplication routersApplication HA licence active and Standby mode to manage 100% uptime, 1000 Users support self-ticking management
1
-
-
... More
Dedicated Servers to RUN multiple application on virtually with Windows 2019 OS licences combined 64GB RAM , 3TB HDD, 16 CORE Processor HP/DELL
1
-
-
... More
(PART L) PROVIDING LIFT TWO NUMBERS.
-
-
-
... More
8 Passenger elevator with 4 stops without machine room as per specification - 282 - KONE I MonoSpace R22.1-2.(a. Price validity 12 months from date of signing order, b. Warranty 12 months from date of handing over) etc., complete complying with standard specification and as directed by SIPCOT officers.
2
-
-
... More
(PART M) PROVISION FOR BT ROAD INSIDE THE CAMPUS.
-
-
-
... More
Clearing Light Jungle.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. etc., complete complying with standard specification and as directed by SIPCOT officers.
2958
-
-
... More
Forming Embankment using carted earth with a conveyance of 10Km having CBR value not less then 8% which has to compacted properly and form a stable embankment including cost , loading and unloading and labour for proper setting out, stripping and storing the top soil, if necessary compacting the original ground by vibratory roller to have a relative compaction of required proctor density, spreading the materials uniformly over the entire width of embankment in layers of not exceeding 500 mm compacted thickness, breaking clods, watering with all leads for water, compacting to 97% proctor density for the soil 0.5 meter height of sub grade under optimum moisture content with moisture content adjusted in the range of one per cent (1 %) above and two percent (2%) below the optimum moisture content determined as per IS. 2720 (Part VII) with power roller rolling and other construction equipments approved by engineer-in-charge and finishing the embankment at 97% proctor density including compaction to specified requirement, working in narrow width of embankment including hire and fuel charges for all tools and plants and all other incidental charges etc., complete complying with standard specification and as directed by SIPCOT officers. (Forming Subgrade at 95% Compaction)
7692
-
-
... More
Forming Subgrade using carted earth with a conveyance of 10Km having CBR value not less then 8% which has to compacted properly and form a stable embankment including cost , loading and unloading and labour for proper setting out, stripping and storing the top soil, if necessary compacting the original ground by vibratory roller to have a relative compaction of required proctor density, spreading the materials uniformly over the entire width of embankment in layers of not exceeding 500 mm compacted thickness, breaking clods, watering with all leads for water, compacting to 97% proctor density for the soil 0.5 meter height of sub grade under optimum moisture content with moisture content adjusted in the range of one per cent (1 %) above and two percent (2%) below the optimum moisture content determined as per IS. 2720 (Part VII) with power roller rolling and other construction equipments approved by engineer-in-charge and finishing the embankment at 97% proctor density including compaction to specified requirement, working in narrow width of embankment including hire and fuel charges for all tools and plants and all other incidental charges etc., complete complying with standard specification and as directed by SIPCOT officers. (Forming Subgrade at 97% Compaction)
1265
-
-
... More
Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- V of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.
230
-
-
... More
Construction of Granular Sub - Base (GSB) to the required compacted thickness (Drainage layer) by providing approved Coarse graded material conforming to Grading- III of Table 400 - 1 and satisfying the physical requirement for material for GSB as per Table 400 - 2 of MORTH Rev.-5 including screening, spreading in uniform layers with motor grader on prepared surface, watering and premixing by mix in place method with rotavator at OMC, and compacting with Vibratory roller 80 to 100 KN static weight to achieve the desired density and fine dressing to required grade and cross slope as directed by the SIPCOT officers etc., complete including obtaining and transporting all materials from approved quarry site to work site with all lift and lead by mechanical transport, head load or any other mode of transporation including cost and conveyance of all materials, labour charges,hire charges and fuel charges for loader, water tanker with sprinkler,motor grader, vibratory road rollers and all other equipments, tools and plants, safety measures, testing required including all other incidental charges, etc., complete as per the standard specification as per clause 401 of MORTH Rev.-5 and as directed by the SIPCOT officers.
315
-
-
... More
Providing and laying, spreading and compacting graded stone aggreates to Wet Mix Macadam Base Course of 250mm compacted thickness specification in two layers of 150mm thick each or else as specified on the prepared sub base by providing approved Coarse graded material conforming to Table 400 - 13 and satisfying the physical requirement for material for WMM as per Table 400 - 12 of MORTH Rev.-5, including pre-mixing the materials with water at OMC in mechanical mix plant carriage of mixed matrerial by tipper to site laying in uniform layers with favours in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rental for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev.-5 and as directed by SIPCOT Officers.
280
-
-
... More
Providing and laying Prime coat over wet mix macadam surface using 7.00 Kg bitumen for 10 sqm area including cost and conveyance of bitumen binder including labour charges for preparing the surface and applying the required quantity as tack coat by bitumen sprayer etc.complete as per clause 502 of MORT & H specifications. etc., complete complying with standard specification and as directed by SIPCOT officers.
1115
-
-
... More
Providing and laying Tack coat over treated wet mix macadam surface using 2.50 Kg bitumen to cut back for 10 sqm area including cost and conveyance of bitumen binder including labour charges for preparing the surface and applying the required quantity as tack coat by bitumen sprayer etc.complete as per clause 503 of MORT & H specifications. etc., complete complying with standard specification and as directed by SIPCOT officers.
1115
-
-
... More
Providing and laying to 75 - 95 mm thickness Dense Bituminous macadam using 0.40 cum of 37.50 -13.20 mm IRC size graded metal 0.35 cum of 13.20 - 2.36mm IRC graded metal and 0.36 cum of 2.36mm and below IRC size HBG metal with 71.30 kg of VG40 bitumen for premixing for 10 Sq.meter includin cost and conveyance of all materials to CMP site including cost and conveyance of bitumen and other materilas to CMP site heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hoti mix plant 20-30 tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 95 mm with mechanical paver to the specified grades and cross sections and compaction by vibratory Pneumatic Roller to the required density etc., including labour charges for loading the bitumen in bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire,fuel charges for 20-30 tonnes capacity CMP unit bitumen boiler, tipper ttrucks, paver finisher/9 m paver finisher, vibratary/Pneumatic Roller, and al other tools & plants required including fuel and all other incidental charges etc., complete asper specification using CMP as per clause 505 MORTH REV. V Specification and as per directed SIPCOT Officers.(Grade II)
111
-
-
... More
Providing and laying 40mm compacted thickness bituminous concrete using 0.13 cum of 19.0 - 9.5 mm graded IRC size HBG metal 0.17 cum of 9.5-2.36mm IRC graded metal and 0.26 Cum. of 2.36 mm and below size graded metal with 50.30 of bitumen grade VG 40 confirming to IS 73 for pre mixing for 10 Sq. meter and using materials as per table 500 - 17 and staifying the physical requirement for material for course aggregates for BC as per table 500 - 16 of MORTH REV-V including cost and conveyance of all materials to CMP site , heating the bitumen andaggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity, conveyin the mix by tipper trucks to paver site spreading the mix in required temperature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidation 80-100 kn vibratory/Pneumatic road roller to the required density etc., includinglabour charges for loading the bitumen in bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire, fuel charges for 20-30 tonnes capacity CMP unit bitumen boiler, tipper trucks, paver finaisher/9 m paver finisher /Vibratory/Pneumatice road roller , and all other tools and plants requried, including fuel and all other incidental charges etc., complete as per specification using CMPP as per clause 507 OF MORTH REV. specification and as directed by SIPCOT Officers. (Grade II)
50
-
-
... More
Providing and laying of hot applied thermo plastic compound 2.5 mm thick including refletorising glass beads @ 250 gms per Sq.m. area, thickness of 2.50 mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MORTH Specification No. 803 and as directed by SIPCOT officers.
55
-
-
... More
Providing and fixing reflective Road studs of category 'B' Raised pavement markers made out of poly carbonate / ABS moulded body and reflective panels (bi-convex reflectors) with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro-reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No.RW / NH. 33023/10/97.shall not be less than 13.0 sq.cm. The slope or retro - reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a CIL not less than values specified in table 2 of said MORT &H circular and two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be provided for better anchorage etc., complete complying with standard specification and as directed by SIPCOT officers. .
75
-
-
... More
Earthwork excavation in all classes of soil except soft rock not requiring blasting and hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B, including cost of all labour,equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materialsetc., complete complying with standard specification and as directed by SIPCOT officers. for foundation of toe walls of Revetment
214
-
-
... More
Vibrated Cement concrete in M 15 using 40mm ISSHBG including cost and conveyance of all materials to site and cost of cement at site including soft water, labour charges for mixing, transporting, laying and curing concrete, tools and plants and incidental charges as baling out water, maintaining of protective bunds, cofferdams, shorting, struttingetc., complete complying with standard specification and as directed by SIPCOT officers. for TOE WALLS OF REVETMENT
214
-
-
... More
Providing Gravel backing to the required thickness for Revetment slopes including cost and conveyance of gravel to work site and including labour charges for mixing with water so as to attain a plastic state and levelling and laying etc., complete complying with standard specification and as directed by SIPCOT officers.
337
-
-
... More
Manufacturing and fixing of precast cement concrete blocks of size 25cmx25cmx30cm in cement concrete 1:2:4 and fixing them in apron and revetment slopes including cost of all materials from approved source to work site including cost of moulding, mixing, laying in mould, curing with soft potable water and conveying the moulds to work site including labour charges for fixing the blocks to the correct line and level and pointing with cement mortar 1:3 to full depth and all incidental charges etc., complete complying with standard specification and as directed by SIPCOT officers.
2241
-
-
... More
Sub Total of Total Amount in Column BA (ie. Qty x Unit Rate)
1
-
-
... More
Added GST of 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements