Sports Development Authority Of Tamil Nadu Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Sports Development Authority Of Tamil Nadu - SAI Tender
Civil And Construction
Building Construction
Eprocure
Opening Date28 Aug 2024
Closing Date5 Sep 2024
Tender Amount₹ 4,28,00,000
Costs
EMD
₹ 2,25,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_SDAT_477942_1Tender No
sports/2024-2025/011Tender Authority
Sports Development Authority Of Tamil Nadu ViewPurchaser Address
-Website
http://https://sportsauthorityofindia.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Soling Using hard broken Stones
4.6
-
-
Providing cast in situ auger pile by manual/mechanical means up to a depth of 3M of 300mm dia . The quoted rate shall inclusive of boring in all kinds of soil, carting away of bored soil from site and filling the bore hole with M25 concrete up to NGL/EGL, fabricating reinforcement and placing the cage in the bore with cover block ( reinforcement steel will be paid separately).
103
-
-
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
510.52
-
-
Extra for every additional 1m lift or part there of over the initial lead (Earth work open excavation in all soils)
6
-
-
Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam, all round the Pile Caps, Catch basins, trenches, pits, tunnels, wall trenches, back fill, plinth filling, junction of wall and floor. External perimeter of building, surrounding of pipes, expansion joints, below U.G. sump and retaining/side walls etc. as per instructions of chemical manufacturer as directed by the Department officer/ Architect. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc, TC stands for Termiticide Concentrate for Termite Control (Bifenthrin) and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.Including cost of chemicals labour charges,transport and storing etc complete and as directed by the department officers
1250
-
-
Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.
41
-
-
Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
35.07
-
-
Supplying filling in foundation,basement etc with filling suitable embankment filler materilas in layers of not more than 15cm thick well watered,rammed and consolidated etc., complete complying with standard specification and as directed by the department officers.
259
-
-
Plain Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
90.57
-
-
Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.
9
-
-
Cement Concrete M 25 1:1:2 (One Cement, One sand and Two hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
-
-
-
a) Upto basement
123.62
-
-
b) Ground floor
115.01
-
-
Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers -Foundation and Plinth
-
-
-
Ground floor
20
-
-
Brick work in Cement Mortar 1:5 using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.
-
-
-
Inbetween column Up to plinth level
72.5
-
-
In ground floor
228
-
-
Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
238
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
-
-
-
a) Upto basement
381.01
-
-
b)For Plane Surfaces Such as RCC Floor Slab,Roof slab,Beams,Lintels,Bed Blocks,Landing Slab,Waist Slab,Portico Slabs-Ground floor
564.5
-
-
c)For Plane Surfaces Such as Rectangular or Square RCC Columns,Sunshades,Top and Bottom slab of RCC Boxing etc
481
-
-
d)vertical slab, side slabs of boxing, vertical drops, facia, vertical wall
6.5
-
-
Supplying fabricating and placing in position steel reinforcement using mild steel or ribbed star rods for all RCC works as per the design given including cost of steel and binding wire also in all floors steel and binding wire shall be supplied by the contractors etc., complying with standard specifications.
37612.9
-
-
Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,
-
-
-
Overall length
37
-
-
Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.
15
-
-
Providing and fixing fixed window with 12mm thick toughned glass door including aluminium work with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,Glazing, paneling and dash fasteners all complete as per architectural drawings and the directions of Engineer-in-charge.Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications.
10
-
-
UPVC Ventilator
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
19
-
-
UPVC Window
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (All items rate E674)
7
-
-
Supplying and fixing of M.S.grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.
140
-
-
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
2787
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
190
-
-
Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
161
-
-
Flooring with following Plain ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
41
-
-
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers
65
-
-
Paving the floor with best quality Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
59
-
-
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)-'For 40mm thick
400
-
-
Supply & installation of (10+2) mm synthetic PU flooring approved by international basketball/hand ball / badminton /Volleyball federation. Supply and installation of one layer of Conipur 70 primer over concrete /bitumen surface at the rate of 0.15kg/Sqm. Supply and installation of 10mm thick shock pad layer with SBR granules mixed with Conipur 326 binder at the rate of 6 kg per Sqm. Supply and installation of one layer sealing coat with Conipur 220 at the rate of 750gm/Sqm over the SBR Supply and installation of 2mm thick Conipur 227 PU. Supplying and applying of paint coat with approved shade.
400
-
-
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
66
-
-
Providing and filling the tile joint with epoxy grout with followingspecification:Surface preparation including cleaning the joint to befree from dust and loose particles. Providing masking tape on eitherside of the tile joint edges and providing sealing the tile gap withepoxy tile joint grout and finishing neatly and as directed by theepartmental officers. The rate inclusive of cost of materials andlabour, etc., complete.
41
-
-
Paving the floor with best approved quality fine polished Granite
Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic
Grey, Paradise and similar varieties with machine cut edges laid
over a cement mortar bed of 20mm thick using cement mortar 1:3
(One cement and three sand) fixing the slabs with required cement
slurry and laid in true right angles with minimum possible width of
joints and pointing the joints with white cement mixed with
mathcing colouring pigments etc., The granite stone slabs and other
materials to be used shall be got approved by the Executive Engineer
concerned before use on work, etc., complete as per standard
speicification.
2
-
-
Nosing for Granite Slab
3
-
-
Supplying and painting the walls with two coats of wall putty asinstructed by the departmental officers including preparation ofsurface curing, etc., complete in all floors complying with standardspecifications (The wall putty shall be got approved by theExecutive Engineer before use of work).
1529
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
1529
-
-
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wallsurface ect., complete complying with standard specification.
50
-
-
English Stainless Steel Letters
-
-
-
60cm (24”)
30
-
-
Tamil Stainless Steel Letters
-
-
-
60cm (24”)
30
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
87
-
-
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
15
-
-
Manufacturing, supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1.00 mm thick as vertical at 900mm centre with 2 nos of 25 mm dia intermediate horizontal stainless steel pipe of 1.60 mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, griding, polishing, conveyance, electrical charges, etc. complete
10
-
-
Claading walls with following best approved quality, brick tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers
870
-
-
Supplying & fixing in position Greenlam Sturdo Classique Invincible Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch impact and anti bacterial resistant 12mm thick solid compact laminate panels tested by shriram Test House. Finish of the compact laminate should be suede/ *Raw silk, which includes doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 304) as per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U-Channels, (6) SS-Shoe Box Plate (7) MS-Base Plate, (8) Top rail with Corner conntector (9) Rubber noise deafening tape (10) Screws & wall Plugs. The top fitting should consist of SS round top rail which will get fixed with pilasters, with SS panel tube holder, SS corner bend (connected with top rail) will be used on the corner of cubicle in absence of brick wall, SS wall fixing is used only on the wall which will hold the ss top rail.
All screws will of 304 Grade in stainless steel with satin finish. All pilasters are supported by stainless steel Bottom Cladding. The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 110mm.
-
-
-
Toilet Cubicle with standard dimension of 2100mm Height x 1000mm Width x 1550mm Depth, which includes 600mm door size width). Toilet Cubicle I-Shape (Front Partition) with standard dimension of 1885mm Height x 1000mm Width which includes 600mm door size width). The divider height to 2100mm height All aspects specified by the manufactures, Greenlam Sturdo Classique Invincible Model or equivalent. complete as per directions of Engineer-in - charge
9
-
-
Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)
481
-
-
Pre-Engineered Buildings - Supply, Fabrication, Erection with Labours, Consumables, Power tools, Toggles, crane and Painting of Steel structures - Two coats of Zincromate Primer + One coat of Enamel Paint.
25.8
-
-
Supply and Installation of 0.50MM Arch type Colour Coated Galvalume Roofing Sheets 150 Gsm JSW Brand with Accessories.
756
-
-
Supply and Installation of 0.50MM Thick Galvalume Eaves Gutters 150 Gsm JSW Brand with Clamp Set Accesorries
66
-
-
Supply and Fixing of Pedestal Bolt and Nuts 25mm DiaX 1150 mm Long with Accesorries. (Pedestal bolts will be fixing with assist of Total Station Instrument).
84
-
-
Supply and Erection of 20 mm Dia X 75 mm Long Rafter Connecting Bolt Nuts with washer Accesorries. (TVS or UNBROKO BRAND)
345
-
-
Supply and Erection of 24mm Dia X 120 mm Long Column Connecting Bolt Nuts with washer Accesorries. ( TVS or UNBROKO BRAND)
165
-
-
Supply and Erection of 12mm Dia X 50mm Long Purlins Connecting Bolt Nuts with washer Accesorries. (TVS OR UNBROKO BRAND)
2250
-
-
Providing and fixing SFRC manhole cover with frame of size 600mmx600mm, Including cost of all material, machinery, equipment, labour, placing, all lead and lift etc.
3
-
-
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
10846
-
-
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
779
-
-
Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed
57
-
-
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
162
-
-
Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes
130
-
-
PLUMBING WORKS:Supplying and fixing in position white/ colour special delux model glazed cascade type paryware/Hindware/Equivalent wall mounted European water closet of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs,brass screws, etc., including supplying and fixing 10 litres capacity PVC/12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball value with polythene float with brass handle, union cuppling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 nos), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover.Wall Fitting
9
-
-
Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve,15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc Without Pedestal
11
-
-
Supplying, fixing, testing and commissioning approved make Urinal with piller cock fixed above counter with 32mm dia CP waste coupling, 32mm dia C.P.bottle trap with C.P. extension pipe, 1 No. C.P. flexible inlet connection pipe G.I. expansion bolts etc., complete including silicon sealant.
6
-
-
Supplying, fixing, testing and commissioning of approved make 15mm CP Concealed Stop cock with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.
20
-
-
Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock with Health Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete.
9
-
-
Supplying, fixing, testing and commissioning approved make Mirror 600X450 with necessary fixing screws etc complete.
11
-
-
Supplying, fixing, testing and commissioning approved make Angle valve with necessary fittings.
6
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).Supplying and fixing best quality of C.P. wall mixer ,over head showerarm with rose and necessary fittings etc complying with standard specification..
3
-
-
INTERNAL DRAINAGE SOIL AND WASTE PIPE SYSTEM:Supplying and fixing in position UPVC specials / Pipe of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
a) 40 mm dia
30
-
-
b) 50 mm dia
60
-
-
UPVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS
-
-
-
UPVC Elbow Dia 40mm
10
-
-
UPVC Elbow Dia 50mm
10
-
-
UPVC BEND Dia 40mm
10
-
-
UPVC BEND Dia 50mm
10
-
-
UPVC TEE Dia 40mm
10
-
-
UPVC TEE Dia 50mm
10
-
-
UPVC REDUCER Dia 50mm X 40 mm
10
-
-
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
A) 75 mm dia
30
-
-
B) 110 mm dia
60
-
-
B) 160 mm dia
30
-
-
PVC PASTING TYPE SPECIALS FOR SANITARY ARRANGEMENTS
-
-
-
PVC Elbow Dia 75 mm
10
-
-
PVC Elbow Dia 110 mm
10
-
-
PVC SHOE Dia 75 mm
10
-
-
PVC SHOE Dia 110 mm
10
-
-
PVC Y Dia 75 mm
10
-
-
PVC Y Dia 110 mm
10
-
-
PVC Tee with Single Door Dia 75 mm
10
-
-
PVC Tee with Single Door Dia 110 mm
10
-
-
PVC Bend Dia 75 mm
10
-
-
PVC Bend Dia 110 mm
10
-
-
Supplying, laying, jointing, testing and comissioning of approved make PVC floor trap with C P grating with required concrete encasing all around, complete.
-
-
-
a) 110 x 75 mm dia (20 mm water seal)
20
-
-
RAIN WATER SYSTEM:Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
110mm dia PVC Pipe
40
-
-
PVC Specials for Rainwater down fall pipe works
-
-
-
PVC Elbow Dia 110 mm
10
-
-
EXTERNAL DRAINAGE SYSTEM:Supplying, laying, jointing, testing and commissioning approved make PVC 6kg pipes SWR grade confirming to IS 13592 Class "B" with rubber ring joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. The quoted rate should include encasing the pipes in toilet sunken in M-15 grade concrete as per specifications 100mm thk. all around with necessary shuttering arrangement, as directed by Engineer-in-Charge.
-
-
-
a) 110 mm dia
100
-
-
a) 160 mm dia(soil pipe)
100
-
-
Supplying, fixing, testing and commissioning of glazed stoneware gully traps, 550x550mm C.I. grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 115 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover (medium duty) etc., complete.
3
-
-
Providing and constructing inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm, benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge.
-
-
-
a) 600 x 600 mm size internal and depth more than 450 mm but not exceeding 850 mm
3
-
-
b) 600 x 600 mm size Heavy duty cover
3
-
-
HGS SS.20.B. Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B
100
-
-
INTERNAL WATER SUPPLY SYSTEM :Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
dia 20mm
30
-
-
dia 25mm
18
-
-
dia 32mm
12
-
-
PVC Specials for water supply arrangements
-
-
-
ELBOWDia 20mm
10
-
-
ELBOW Dia 25mm
10
-
-
ELBOW Dia 32mm
10
-
-
TEE Dia 20mm
10
-
-
TEE Dia 25mm
10
-
-
TEE Dia 32mm
10
-
-
COUPLER Dia 20mm
10
-
-
COUPLER Dia 25mm
10
-
-
COUPLER Dia 32mm
10
-
-
REDUCER 25 mm x 20 mm
10
-
-
REDUCER 32 mm x 25 mm
10
-
-
REDUCER 40 mm x 32 mm
10
-
-
EXTERNAL WATER SUPPLY SYSTEM FROM OHT:Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
dia 40mm
30
-
-
PVC Specials for water supply arrangements
-
-
-
ELBOW Dia 40mm
10
-
-
COUPLER Dia 40mm
10
-
-
TEE Dia 40mm
10
-
-
EXTERNAL PUMPING WATER SUPPLY SYSTEM: Supplying, laying, jointing, testing & Commissioning of uPVC Schedule 80 pressure pipes as per ASTM D 1785 with Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes in shaft. (For under ground external water supply piping.)
-
-
-
a) 32 mm dia ( UG SUMP TO OH TANK)
60
-
-
ELBOW
-
-
-
Dia 32mm
10
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
Fixing Gun Metal Wheel Valve Dia 40mm
6
-
-
Providing and placing on terrace Polyethylene water storage Tanks as per IS 12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and overflow pipes, including cost of all materials, labour transport charges, HOM and testing complete as per specifications.
4000
-
-
Supplying, installing, testing and commissioning approved make submersible pump made of C.I Construction suitable for building application. Thequoted rate shall also include for auto lvl.controller. providing necessary safety devices viz. dry run protection, over load relays etc., complete working on 230V, 50Hz, 1Ph, with starter,-Duty of Pump :2.0 HP Submersible Pump-2 Lps @ 20.0m Head-1 No. Working (From UG sump to O.H.T)
1
-
-
ELECTRICAL WORKS:Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with GI Flush Mounting box and 6A FT switch in flush with wall with Modular cover Plate (Plastic) and making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)
250
-
-
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with suitable model MS box, modular cover plate and 6A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)
150
-
-
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm, MS switch box with Modular coverplate along with 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point
150
-
-
Supply and laying of 2 x 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') with necessary accessories and end supports for water pump
100
-
-
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth
connection (For Water pump)
2
-
-
Supply and fixing of single box type 4'18W LED Tubelight fitting complete with electronic ballast with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting
30
-
-
Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. ( SD 530 )
30
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make)
6
-
-
Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure, door type with metal door with IP43 protection with Four pole 32A MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with the ISI mark (like standard make)
5
-
-
Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable rigid PVC conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour
2000
-
-
Supply and Run of mains with 2 wire of 4.0 Sqm. Copper PVC conduit 25 mm dia insulated un sheathed single core 1.1. K.V. grade cable with continuous earth 1 wire of 1.5 sqmm etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.
1000
-
-
Supply and run of 1 of No.8 SWG GI wire for earth connection, including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.
100
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
7
-
-
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
5
-
-
Supply and laying of 2 x 6 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
100
-
-
Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
100
-
-
Supply and fixing of 5A or 10A or 20A AC single phase 230V, 50 Hz Watt hour metre on suitable TW box complete with earth connections
7
-
-
Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection
5
-
-
Wiring with 4 pair unarmoured telephone cable suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with 2 module surface box and RJ11 socket on wall / furniture along with Modular cover Plate (Plastic) and making good of the concealed portion
50
-
-
Supply and wiring with 10 pair jelly filled armoured telephone cable suitable PVC rigid pipe and accesories on wall and ceiling and painting of suitable colour. Rate to include supply and fixing of synthetic box (Krone box) along with required accessories.
50
-
-
Supply and fixing of Synthetic Box (Krone Box) with accessories
10
-
-
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")
30
-
-
Supply and fixing of 400mm sweep AC Wall fan (MR)
15
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan
10
-
-
Supply & Fixing of Water Tight Bulk Head Fitting suitable for LED Lamp with Guard Heavy Type
20
-
-
Supply & Fixing of 7 / 9 W LED bulb
20
-
-
Supply and fixing of single box type 100W LED flood light fitting complete with driver wall or ceiling mount clamp with PVC unsheathed Copper leads from terminals to the fitting
50
-
-
Supply and fixing of Backlight LED for Name Boards
40
-
-
Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable Surface box covered with Modular plate on in flush with wall with earth connection (for computer plug socket).
30
-
-
Supply and laying of 4 x 16 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
200
-
-
Supply and Installation of Armoured Lan & CCTV Cable CAT 6 (PWD SOR pg 153) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
100
-
-
Supply and Installation of POE Switch for Camera -8 Port (PWD SOR pg no 154) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Supply and Installation of Hard Disk for NVR 6 TB (PWD SOR pg no 155) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Supply and Installation of Network Video record for CCTV 8 Channel-1 SATA 1 No hard disk (PWD SOR pr 153 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Supply and Installation of CCTV Camera including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Supply and Installation of Rack with Accessories 6 U rack (PWD SOR page no 155) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Supply and Installation of I/O socket RJ 45 (PWD SOR pg no 154) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
3
-
-
Supply and Installation of I/O socket RJ 11 (PWD SOR pg no 154) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
3
-
-
Supply and Installation of 29" LED TV including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
Supply and fixing of water CO2 stored pressure type 9litres capapcity fire extinguishers as per new IS 15863 complete with control valve, gun meta cap, pressure guage, operation sticker, discharge hose, wall mounting bucket , safety clip, etc., as directed by departmental officers (SOR pg 140-8-e)
10
-
-
Supply and instalaltion of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle (TWAD 122) etc., as directed by departmental officers
5
-
-
Supply and instalaltion of First Aid Box complete with all First Aid Medicines (TWAD 122) etc., as directed by departmental officers
10
-
-
Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 150mm top diameter, 340mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 6mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 8 nos 150W LED luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 6 nos fixed in existing RCC foundation and junction box etc, complete 16 Meters
2
-
-
UNDERWATER LIGHTING FOR MAIN POOL :Lights :Supplying of Warm White LED Light 14.5W/12V AC FlexiSlim ABS including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
16
-
-
Junction box : Supplying and instalation of of Deck Box (Suitable to Use with Lights) 1P65 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
16
-
-
Transformer : Supply and instalation of Transformer 100VA/ 12V output IP20 including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
3
-
-
Supply & Installation of copper cable, junction boxes to transformer & transformer to Control panel including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
-
-
-
2.5 Sqmm
350
-
-
4 Sqmm
100
-
-
Valves and Control:Butterfly Valve for Inlet: Supplying and instalation of Butterfly Valve 140 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
Butterfly Valve for Main Drain : Supplying and instalation of Butterfly Valve 140 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
Butterfly Valve for Suction line : Supplying and instalation of Butterfly Valve 110 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
Butterfly Valve for Balancing Tank:Supplying and instalation of Butterfly Valve 110 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
4
-
-
Ball Valve for Pump Suction & Delivery: Supplying and instalation of PVC Ball Valve 90 mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
6
-
-
Non Return Valve - Flap Type for Pump Delivery Supplying and instalation of Wafertype check valve 110mm dia including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
3
-
-
Foot Valve for Balancing Tank :Supplying and instalation of of Foot Valve 110mm including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
PIPES AND FITTINGS SUPREME 10 Kg:Supply and instalation of 140mm dia PVC Pipe T(10kg/cm2 Pressure) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
24
-
-
Supply and instalation of 160mm dia PVC Pipe (10kg/cm2 Pressure) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
178
-
-
Supply and instalation of 90mm Dia PVC Pipe (10kg/cm2 Pressure) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
58
-
-
Supply and Mtrs instalation of 75mm Dia PVC Pipe (10kg/cm2 Pressure)) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
24
-
-
Supply and instalation of 63 mm dia PVC Pipe (10kg/cm2 Pressure) including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
90
-
-
CONTROL PANEL:Supply and instalation of Control Panel c/w sheet steel enclosure, ELCBs, MCBs, O/L relays for pumps auto / pre-set (on timer) and hand controls for pumps (components are of ABB, L&T Schneider). Included with 2.4 Sqmm 2 core, 1.5 Sqmm core including conduiting with necessary joint adaptors elc., including all Material,labour,loading,unloading etc as per direction of Architect and Engineer incharge
1
-
-
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
(a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with
Media Pubble and Fine Sand and Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic
(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.
& Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low
Pressure Switch - 1 No., Level Switch - 1 No. & Necessary
CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control System
with necessary Stainless Valves and Fittings and Float Control
etc. The rate should be inclusive of all civil works, wherever
necessary to install the System in position and intact.
2
-
-
Acoustic enclosure: The acoustic enclosure shall be made of 1.6 mm thick CRCA sheets in suitable approved shade and a structural/ sheet metal base frame painted in black. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75dBA at 1 m sound levels specified by Ministry of Environment & Forest The enclosure has the following features: Specially designed to meet stringent MOEF/CPCB norms of 75dBA @ 1 m at 75% load under free field conditions, Two point lifting for easy handling at customer site, Designed to have optimum serviceability, Air inlet louvers specially designed to operate at rated load made on special purpose CNC machines for consistency in quality and workmanship, Powder coated for long lasting service life and superior finish, With UV resistant powder coating, can withstand extreme environment, Use of special hardware for longer life, Insulation material meets exacting IS 8183 specifications for better sound attenuation, Flush styling - no projections, Fluid drains for lube oil and fuel, Fuel filling point inside the enclosure. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.-10Kva
1
-
-
SupplyofLEDBollardlightfittingof...Wwithpressurediecast aluminiumhousingbodyforoptimal thermaldissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, deliveringsuperior light output Rated lifeBurningHrs50000 hr@ Lumen Maintenance of 70%, CCT 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 withmains, SurgeProtection- Min5KValongwithOvervoltage/Overload, shortcircuit/miss-wiringprotection. Universal Voltagedriver to operate wide voltage range from100V to 270V50/60Hz application.CompliancetoIS10322/IEC60598, LM79&LM 80Adherence withRoHS.ULapprovedMCPCB, with2years Warranty against anymanufacturing defect working under standard electrical condition-8W 1 m Height
30
-
-
Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements