Special Economic Zone Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Special Economic Zone Authority Tender
Civil Works Buildings
Eprocure
Opening Date14 Jul 2020
Closing Date29 Jul 2020
Tender AmountRefer Documents
Costs
EMD
₹ 1,00,000Document Cost
₹ 5,600Tender Fee
Refer Documents
Summary
Civil Works For The Construction Of 3rd Floor At The Administrative Office Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_MSEZA_571064_1Bid Award Id
ViewTender No
MEPZ/KITCO/CL/02/2019/R2Tender Authority
Special Economic Zone Authority ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
All kinds of soil
10
-
-
Filling available excavated earth(excluding rock) in trenches, under floors,plinth,sides of foundation,in areas etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50m and lift upto 1.5m including cost and conveyance of all materials,labour charges, etc complete at all levels as directed by the Engineer-in-Charge
5
-
-
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil and unserviceable material as directed, within a lead of 50 m All kinds of soil
-
-
-
Pipes, cables etc. not exceeding 80mm dia
10
-
-
In all kinds of soil for pipes, cables etc exceeding 80mm dia but notexceeding 300mm dia.
10
-
-
Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm
10
-
-
Disposal of surplus excavated earth / building rubbish / malba / similar unserviceable,dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
10
-
-
(SH: - 2.0 - CONCRETE WORK)
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead,lift , etc. complete for all work up to plinth level as directed by Engineer- in-Charge. 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
-
-
Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
10
-
-
Providing and laying cement concrete of specific grade properly mixed and consolidated with hand rammers, including cost and conveyance of all materials, labour, curing, lead lift , etc. complete as directed by Engineer-in-Charge at all levels.
For screed concrete 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 6mm nominal size)
53
-
-
Extra for providing and mixing water proofing compound in cement concrete work, masonry work, plastering etc in the proportion recommended by the manufacturers including cost and conveyance of all materials, labour, curing, lead, lift, etc. complete as directed by Engineer-in-Charge at all levels.
24
-
-
Providing and laying damp-proof course 50mm thick with cement concrete1:2:4 (1 cement: 2coarse sand (zone III) : 4 graded stone aggregate of 20mm nominal size) including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer- in-Charge
74
-
-
Providing and applying a coat of residual petroleum bitumen of grade VG 10 of approved quality using 1.7kg per square metre on damp -proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including cost and conveyance of all materials,labour charges,lead,lift etc complete at all levels as directed by the Engineer-in-Charge
74
-
-
(SH: - 3.0 - R.C.C. WORK)
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements such as footing,grade beam,columns etc,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite groken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge All work upto plinth level.
1
-
-
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262 for reinforced cement concrete structural elements such as lintel, beam, slab, columns etc,using coarse sand conforming to IS 383 and 20mm nominal size graded hard granite groken stones, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in proportion of 0.5% of weight of cement (asper IS 9103) to accelerate,retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-in-charge All work above plinth level upto floor V level .
43
-
-
Providing ,hoisting and fixing precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, slabs,brackets etc. including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 crusher sand), cost of required centering, shuttering etc complete but excluding the cost of reinforcement as per direction of Engineer-in-charge, with design mix cement concrete of M-25 grade conforming to IS 456 or IS 10262.
1
-
-
Extra for providing richer mixes at all floor levels.Providing M-30 grade concrete instead of M-25 grade BMC/
RMC. (Note:- Cement content considered in M-30 is @ 340 kg/ cum)
43
-
-
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with 16 gauge GI binding wire etc complete including cost, conveyance, lead, lift of all materials for all types of RCC works at all levels as per drawing/specification and as directed by Engineer-in-Charge.
Thermo-Mechanically Treated bars
6356
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
3
-
-
Suspended floors, roofs, landings, balconies and access platform.
1
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
348
-
-
Edges of slab and breaks in floors and walls under 20 cms wide
174
-
-
Weather shade, Chajjas, corbels etc., including edges.
130
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing propping, etc. including cost of deshuttering and decentering at all levels ,over a height of 3.5 m for every additional height of 1m or part there of (plan area to be measured)
1430
-
-
(SH: - 4.0 - MASONRY WORK)
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
109
-
-
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
45
-
-
Extra for providing and placing in position 2 Nos. 6 mm dia M.S. bars at every third course of single block masonry at all levels including cost and conveyance of MS bars etc complete as directed by Engineer-in-Charge
985
-
-
(SH: - 5.0 - JOINERY & PARTITION WORKS )
Providing and fixing powder coated aluminium work for doors ,windows& partitions with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make confirming to IS:733 & IS:1285 fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions,at top,bottom & sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth,rust free,straight,mitred & jointed mechanically where ever required including cleat angle,aluminium snap beading for glazing/panelling,cp brass/stainless steel screws,removing the stickers clearly all complete as per architectutral drawings & directions of Engineer-in-Charge at all levels.(glazing & panelling to be paid seperately).Minimum thickness of powder coating for powder coated Aluminium shall be 50 micron
For fixed portion
2868
-
-
For shutter of doors ,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings,exhaust fan of required size,etc wherever required including the cost of PVC neoprene gasket required(fittings shall be paid for separately)
852
-
-
Providing and fixing 12 mm thk prelaminated marine ply conforming to IS:710 in panelling fixed in aluminium doors,windows shutters and partition frames with C.P. brass / stainless screws etc complete as per architectural drawings and directions of Engineer in charge at all levels.Pre laminated marine ply with decorative lamination on both sides
158
-
-
Providing and fixing glazing in aluminium doors,windows,ventilator shutters,partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directon of Engineer-in-Charge at all levels
-
-
-
with float glass panes of 5.5mm thickness
12
-
-
with float glass panes of 4.mm thickness
50
-
-
with pin headed glass panes of 4.mm thickness
5
-
-
Providing and fixing IS:3564 marked Aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc complete as directed by the Engineer-in-Charge at all levels.
107
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge.
76
-
-
Providing and fixing zinc alloyed (white powder coated) touch lock for aluminium sliding window with necessary screws etc. complete. including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer in Charge.
61
-
-
Providing and fixing 200 x 10 mm aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by the Engineer-in-Charge at all levels.
238
-
-
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour and shade with necessary screws etc complete as directed by the Engineer-in -Charge at all levels.
Single rubber stopper
107
-
-
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. including cost of all accessories, labour charges for fixing etc. complete as directed by the Engineer-in-Charge at all levels.
9
-
-
Providing wood work in frames of doors, windows , clerestory windows and other frames, wrought frames and fixed in position with hold fast lugs or with dash fastners of required dia & length(hold fast lugs or dash fastener shall be paid separately)
Second class teak wood
0.56
-
-
Providing and fixing panelled or panelled and glazed shutters of approved design(grooves,beadings etc) for doors, windows and clerestory windows including ISI marked stainless steel butt hinges(100 x 60 x 6.5mm IS : 12817 marked ) with necessary screws excludings panelling which be paid for separately.The rate shall includes cost and conveyance of all materials,labour, lead, lift, etc. complete as directed by Engineer in Charge at all levels.
Second class teak wood - 35 mm thick shutters
6
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters approved design(grooves,beadings etc) for doors, windows and clerestory windows(area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick:The rate shall includes cost and conveyance of all materials,labour, lead, lift, etc. complete as directed by Engineer in Charge at all levels.
Second class teak wood
10
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including cost and conveyance of all materials,labour etc complete at all levels as directed by the Engineer in Charge.
42
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked stainless steel butt hinges(100 x 60 x 6.5mm IS : 12817 marked ) with necessary screws excludings panelling which be paid for separately.
Second class teak wood
35 mm thick shutters
21
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick:
Second class teak wood
21
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
15
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
88
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.
27
-
-
Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I. sheet ( zinc coating not less than 120 gm/ sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer -in-charge (Dash fastener to be paid for separately ).
16
-
-
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS : 3614 (Part - II), tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer -in-charge ( panneling to be paid for separately).
7
-
-
Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size. made out of 20 SWG G.I. sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge. With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resisitance
1
-
-
(SH: - 6.0 - STEEL WORK)
Structural steel work welded in built up sections,trussess and framed work including cutting, hoisting, fixing in position and applying two coats of Synthetic enamel paint over two coats of anticorrossive Yellow zinc chromate primer including cost and conveyance of all materials,labour charges ,lead,lift etc complete as directed by Engineer- in-Charge at all levels.
35342
-
-
Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels.
In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.
809
-
-
Providing and fixing 2mm thick M.S sheet door with frame of 40x40x6 mm MS angles,40x40x6 mm MS angles for diagonal braces and 3mm M.S gusset plates at the junctions and corners ,all necessary fittings complete including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, conveyance of all materials, labour, etc. as directed by Engineer in Charge at all levels.
3
-
-
Steel work in built up tubular sections YST 310 grade as per IS: 4923 including cutting, hoisting, fixing in position, welded and bolted including special shaped washers etc. complete with electric resistance or induction butt welded tubes including painting with two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, closing all the open ends properly with same material cost and conveyance of all materials, labour, etc., complete as directed by the Engineer-in-Charge at all levels.
6162
-
-
Providing and fixing M.S round holding down bolts with nuts and washer plate including two coats of approved make and colour synthetic enamel paint over two coats of approved make yellow zinc chromate primer,including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer-in-Charge
2075
-
-
(SH: - 7.0 - FLOORING WORK)
Providing and fixing Vitrified floor tiles 600x600 mm of approved thickness Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade including cost and conveyance of all materials,labour charges, lead, lift etc, complete as directed by the Engineer in Charge
956
-
-
Providing and fixing Vitrified wall tiles in skirting,dados etc 600x600mm of approved thickness Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade .including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge.
97
-
-
Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer in Charge at all levels.
62
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
178
-
-
52 mm thick cement concrete flooring with hardcare concrete hardener topping under layer 40mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick Hardcrete cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume with which Hardcrete hardening compound of approved make is mixed as per manufactures specification and providing and fixing 4 mm thick glass strips in approved pattern including cost of cement slurry,etc. complete as directed by the Engineer-in-Charge at all levels.
14
-
-
Cement plaster skirting 18 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement etc. complete as directed by the Engineer in Charge at all levels.
5
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., upto floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
10
-
-
Supplying and laying approved quality and size pressed cement tiles minimum 22mm thick in CM 1:4 (1 cement: 4 course sand),20mm thick including cost and conveyance of all materials and labour ,lead,lift,joints finished with white cement mixed with pigment of matching shade etc as directed by the Engineer in charge (colour of tiles,laying pattern etc to be got approved by the Engineer-in-Charge).
10
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
24
-
-
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite work including providing necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete as directed by the Engineer-in-Charge at all levels.
12
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of baby metal, filling the joints with coarse sand etc., all complete as directed by the Engineer-in- Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
10
-
-
(SH: - 8.0 - ROOFING WORK)
supply & fixing of Double Skin metal Roofing with insulation consisting of Lloydeck
profiled colour coated galvalume sheet as top sheet with 975mm cover width, 28mm crest height at
195mm pitch made out of 0.50mm TCT cold rolled steel of 550Mpa yield strength with hot dip metallic
coating of minimum 150gm/sqm zinc aluminium alloy coating mass (55% aluminium, 43.5% zinc &
1.5% silicon) total of both sides. The colour shall have a total coating thickness of 35 microns of silicon modified polyester paint system in approved colour comprising of 20 micron exterior coat on top surface and 5 micron reverse coat on back surface over 5 microns primer coat on both surface. The sheet shall be factory cut and supplied in required length to suit site condition and design drawings. The top sheet shall be crest fixed to the GI „Z‟ sub girt already provided on the bottom sheet with hot dip galvanized imported self-drilling fasteners with integral EPDM washers for perfect
sealing . The bottom sheet shall be Lloydeck reverse profiled colour coated galvalume sheet with 975mm cover
width, 28mm crest height at 195mm pitch made out of 0.50mm TCT cold rolled steel of 550Mpa yield strength with hot dip metallic coating of minimum 150 gm/sqm Zinc Aluminium Alloy coating mass (55% Aluminium, 43.5% Zinc and 1.5% Silicon) total of both sides.
The colour coating shall have a total coating thickness of 35 micron silicon modified polyester paint system in approved colour comprising of 20 micron of exterior coat on top surface and 5 micron reverse coat on back surface over 5 micron primer coat on both surface. The bottom sheet shall be fixed directly to the purlin as liner sheet using galvanized imported self drilling and self tapping fasteners with EPDM washers. Rockwool Slabs of 75mm thick having a density of 64kg/cum encased in polythene bag shall be sandwiched between the internal and external sheeting as insulation. The sheet shall be separated with „Z‟ shaped sub girts of 50 x 75 x 50mm size made out of 1.6mm thick galvanized steel sheets. The sub girts shall be fixed on the bottom sheet and shall be used for supporting the external sheet
(top sheet). The rate is inclusive of cost and conveyance of all materials, labour, lead, lift etc.as directed by the Engineer-in-Charge.
1620
-
-
Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, all taxes etc. complete at all levels as directed by Engineer-in-Charge
151
-
-
Providing and fixing precoated galvanised steel sheet Gutter 600mm over all girth) 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
239
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum moisture resistant board
608
-
-
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
415
-
-
(SH: - 9.0 - FINISHING WORK)
6 mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
130
-
-
12mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
1274
-
-
15mm cement plaster of mix 1:4 (1 cement : 4 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
1000
-
-
15mm cement plaster of mix, 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement 2 kg/sqm including mixing water proofing material in separately).proportion recommended by manufacturer over roof at all heights including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels. (water proofing liquid will be paid separately)
15
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on all surface including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
2043
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
608
-
-
Finishing walls with acrylic smooth exterior paint for new work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10sqm including cost and conveyance of all materials, labour charges, scaffoldings etc complete as directed by the Engineer in Charge at all levels.
609
-
-
Painting the inside walls with ready mix plastic emulsion paint of approved quality two or more coats to smooth even finish on ceiling and walls including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, etc as directed by Engineer-in-Charge at all levels
2434
-
-
Painting with synthetic enamel paint two or more coats of approved brand on wood work of approved brand and manufactures to give an even shade including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.
71
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
7
-
-
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge..(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. .Only skilled and experienced persons shall be employed for this purpose.)
62
-
-
Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing all fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge
37
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between twoAluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work forACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."
405
-
-
Providing Luxalon SL-4 Louvers in 84R Plain Panel manufactured by M/s. Hunter Douglas India Pvt. Ltd. of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6mtrs coil coated on a continuos paint line double baked and roll formed from enameled corrosion Resistance Aluminium Alloy AA3005 (Al.Mg.) for higher strength and good Roll forming characteristics. Panels shall be clipped at a distance of 86 mm to baked enameled Aluminium SL-4 panel stringer 33mm wide and 86mm deep x 0.95 mm thick in a standard length of 5mtrs made of double baked enameled Aluminium Alloy AA5050 (Al.Mg.) white to hold the panel in a module of 86mm centre to centre. The prongs on SL–4 stringers shall be to accommodate an angle of 21.30 Degrees between two panels. SL-4 stringers shall be fixed at 150 mm from panel ends and at a distance of maximum 1000 mm center to center across the panel span. The carrier shall be fixed to a suitable structure by means of rigid fixing details. All proerties and specifications shall comply with ECCA directives and more specifically EN 1396:1996 Paint Finish: -Panel shall be stove enamelled and finished with Luxacote, a patented special three layered coating system (consisting of first a conversion layer of thickness 800-2000mg/sq mtr, a polyurethane basecoat of 16-20 microns, and a special top coat of polyamide particles of 8-12 microns thick to provide excellent abrasion and damage resistance) in a continuous coil coating process of the approved colour on the exposed side and the reverse side with epoxy.
128
-
-
Providing and fixing 18mm thick exterior grade UPVC board as roof face board (Mughappu) of Multiwood make or equivalent , at a height of 10m, made of U Pvc polyester resin in an extruded polymer profile form with CNC cutting as per approved design and drawing.The board shall be 100% waterproof, Termite & Borer proof, corrosion free & fire retardend and used for wet area applications.The rate shall include cost and conveyance of all materials, labour, scaffolding, lead, lift etc complete at all levels as directed by the Engineer- in-Charge.
9
-
-
(SH: - 10.0 - MISCELLANEOUS BUILDING WORK)
Supplying, diluting and injecting chemical emulsion for PRE- CONSTRUCTIONAL anti-termite treatment: Treatment of soil using chemical emulsion by drilling 12 mm diameter holes upto 300mm depth at 150 mm center to center: With Imidacloprid 30.5% SC at 2.1 ml per litre of water as per IS 16131. The rate includes preparation of surface, treatment, cost and conveyance of all materials including chemical emulsion, labour charges,lead,lift etc complete as per manufacturer's specification and as directed by the Engineer-in-Charge. The above work shall be carriedout by an agency having sufficient experience and should ensure a service warranty of 10 years. Only skilled and experienced persons shall be employed for this purpose.
50
-
-
Providing and placing in position suitable PVC water stops conforming to IS :12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc., complete including all cost and conveyance of all materials, labour charges etc. complete as directed by Engineer - in - Charge at all levels : Serrated with central bulb(225mm wide, 8-11 mm thick).
5
-
-
Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
-
-
-
150 mm dia. RCC Pipe
5
-
-
300 mm dia. RCC Pipe
5
-
-
Drilling hole 30 to 34mm dia to a depth of 250 mm and fixing25mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as directed by the Engineer-in -Charge at all levels
50
-
-
Drilling hole 26 to 30mm dia to a depth of 200 mm and fixing20mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as directed by the Engineer-in-Charge at all levels
50
-
-
Drilling hole 20 to 22mm dia to a depth of 160 mm and fixing 16mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as Directed by the Engineer-in-charge at all levels
50
-
-
Drilling hole 15 to 18mm dia to a depth of 120 mm and fixing 12mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as Directed by the Engineer-in-charge at all levels
50
-
-
Drilling hole 12 to 16mm dia to a depth of 100 mm and fixing 10mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as Directed by the Engineer-in-charge at all levels
50
-
-
Drilling hole 10 to 14mm dia to a depth of 100 mm and fixing 8mm reinforcing bar using approved fastening method including all labour charges and cost of chemical anchoring materials but excluding the cost of reinforcement etc complete as Directed by the Engineer-in-charge at all levels
50
-
-
(SH: - 11.0 - DISMANTLING WORK)
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead.
For thickenss of tiles above 10mm and upto 25mm
1050
-
-
Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
5.04
-
-
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar
74.25
-
-
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)
50
-
-
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer-in-Charge.
325
-
-
SH :12.0 SANITARY INSTALLATION
Providing & fixing of star white vitreous China European wall hung pan with soft close seat and lid with CP brass hinges and rubber buffers with ceramic cistern complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price (inclusive of all taxes) of WC pan with soft close seat and lid including all accessories shall be taken as Rs 4257/- and ceramic cistern shall be Rs2669/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
10
-
-
Providing & fixing star white vitreous china flat back urinal with CP brass flush valve of approved size with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of Urinal is Rs 5538/-, flush valve is Rs 1663/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
4
-
-
Providing and fixing of star white vitreous china urinal division plate of approved quality and make with fittings/fastener including cutting and making good the walls, cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge. (The purchase price(inclusive of all taxes) of Urinal division plate is Rs 1550/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
4
-
-
Providing & fixing of star white vitreous china under counter wash basin of approved size, C P brass waste assembly, CP brass bottle trap with extension piece 450mm long connections pipes wall flanges and rubber adapters for waste connection,angle valve pillar cock, complete including CI/MS brackets duly painted, nuts, washers, etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of under counter WB is Rs 1726/-, CP brass pillar cock is Rs 1270/-, angle valve-Rs 395/-,bottle trap-Rs1050/- , waste coupling Rs 290/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
9
-
-
Providing and fixing CP brass hand spray with lever control (health faucet) of make 1meter long flexible tube and wall hook,CP brass angle valve and all fittings etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of Health faucet with wall hook and flexible tube is Rs 1240/- and angle valve is Rs 610/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
10
-
-
Providing and fixing CP brass body bib cock etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of CP brass bibcock is Rs 1190/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). 15 mm nominal bore
10
-
-
Providing and fixing SS floor trap of 110mm outer dia including SS cockroach free floor grating with cup, PVC multitrap etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.
15
-
-
Providing and fixing concealed floor trap including SS cockroach free floor grating with cup etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.
2
-
-
Providing and fixing stainless steel A ISI 304 (18/8) sink of size 510 X 1040 mm bowl depth 200 mm without drain board, 40mm CP brass bottle trap, CP brass waste coupling , CP brass sink cock(table mounted), angle valve etc per IS: 13983 with C.I. brackets & stainless steel plug, including painting of fittings and brackets, cutting and making good the walls ,floors,slab wherever required,testing and commissioning to the satisfaction of Engineer in Charge:The rate is including cost and conveyance of all materials, labour charges, lead,lift etc complete as directed by the Engineer in charge at all levels. (The purchase price(inclusive of all taxes) of SS sink is Rs 3773/-and CP brass sink cock is Rs 1500/-, Bottle trap is Rs 1050/-, waste coupling is Rs 290/-, angle valve is Rs 365/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
1
-
-
Providing and fixing CP brass over head shower with arm, shower mixer, bath spout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(The purchase price(inclusive of all taxes) of CP Over head shower with arm Rs.1004/- ,bath spout is Rs1656/- , shower mixer is Rs4164/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
2
-
-
Providing and fixing CP brass towel rail of approved make etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(The purchase price(inclusive of all taxes) of CP towel rack is Rs 740/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
2
-
-
Providing and fixing C.P. brass stop cock (control valve) of standard design and of approved make conforming to IS:8931 etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of CP stop cock including exposed and conealed parts is Rs 1130/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor). 20 mm nominal bore.
5
-
-
Providing and fixing SS cleanout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(110 mm dia)
6
-
-
Providing and fixing SS cleanout etc. complete, testing and commissioning to the satisfaction of Engineer in Charge at all levels.(75 mm dia)
6
-
-
Providing and fixing CP robe hook etc complete testing and commissioning to the satisfaction of Engineer in Charge at all levels. (The purchase price(inclusive of all taxes) of Robe hook Rs 310/-and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
8
-
-
Providing and fixing CP brass soap dish with holder of approved quality and make including cost and conveyance of all materials labour charges etc complete as directed by the Engineer in Charge at all levels.(The purchase price(inclusive of all taxes) of CP brass soap dish is Rs 480/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted ) while making payment to the contractor).
2
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
-
-
SH: - 13.0- WATER SUPPLY PIPING WORKS
Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
50mm nominal dia
6
-
-
40mm nominal dia
6
-
-
32 mm nominal dia
6
-
-
Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
100 mm nominal dia
78
-
-
80 mm nominal dia
12
-
-
65 mm nominal dia
36
-
-
50mm nominal dia
30
-
-
40mm nominal dia
6
-
-
32 mm nominal dia
12
-
-
25mm nominal bore
6
-
-
20mm nominal bore
6
-
-
Supplying, fixing, testing and commissioning of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
32mm nominal dia
12
-
-
25mm nominal dia
24
-
-
20mm nominal dia
90
-
-
15mm nominal dia
12
-
-
Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer- in-Charge at all levels
-
-
-
80 mm dia
4
-
-
65 mm dia
4
-
-
50 mm dia
4
-
-
40mm dia
3
-
-
32mm dia
3
-
-
25mm dia
3
-
-
20mm dia
10
-
-
Supplying, installing,testing and commisioning of GSM powered water level controller with single phase preventor, phase imbalance preventor, auto starter, timer, external antenna, wiring kit and other accessories including supporting, fixing of materials as required
2
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
13
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
-
-
Supplying and fixing C I Non return valve PN 16 with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer- in-Charge at all levels
-
-
-
65 mm nominal bore
2
-
-
80 mm nominal bore
2
-
-
Providing and fixing C.I. sluice valves (with cap) complete as per IS 14846 with bolts, nuts, rubber insertions including cost and conveyance of all materials etc complete as directed by the Engineer- in-Charge at all levels
100 mm dia nominal bore PN 10
2
-
-
SH: - 14.0- SANITARY PIPING WORKS
Supplying, laying, jointing, testing and commissioning of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including earth work, refilling, ,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for external works as directed by the Engineer -in-Charge
-
-
-
160mm OD(6 kg/cm2)
30
-
-
110mm OD(6 kg/cm2)
12
-
-
75mm OD(6 kg/cm2)
6
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in Charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps testing the lines rectifying any leakages or defects,etc. complete as directed by the Engineer-in-Charge for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for internal work-exposed on walls as directed by the Engineer in charge.
-
-
-
110mm OD(6 kg/cm2)
312
-
-
75mm OD (6 kg/cm2)
72
-
-
50mm OD (6 kg/cm2)
15
-
-
75mm OD (4 kg/cm2)
90
-
-
Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes with PVC specials such as tees, bends, door bend, door tee, elbows,unions, etc. with clamps including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge.
-
-
-
110mm OD (6 kg/cm2)
36
-
-
75mm OD(6 kg/cm2)
36
-
-
50mm OD(6 kg/cm2)
30
-
-
Supplying, laying, jointing, testing and commissioning Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
300mm dia RCC pipes
20
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
560 mm dia circular D.I. cover with square frame(heavy duty) for manholes
3
-
-
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil and unserviceable material as directed, within a lead of 50 m
-
-
-
Pipes, cables etc. not exceeding 80mm dia
6
-
-
In all kinds of soil for pipes, cables etc exceeding 80mm dia but not exceeding 300mm dia.
30
-
-
Supplying, fixing, testing and commissioning to the satisfaction of Engineer in charge of PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and water tight C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge
6
-
-
Providing and fixing PVC vent cowl to pipe already fixed as directed by Engineer-in-Charge at all levels.
-
-
-
110mm dia
5
-
-
75mm dia
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements