Rural Development And Panchayati Raj Department Tender

km 0/0 - 1/0

km 1/0 - 2/0

km 2/0 - 3/0

KM 3/0 - 4/0

KM 4/0 - 5/0

KM 5/0 - 6/0

KM 6/0 - 6/700

Advance patch work for making up the undulation in the existing B.T surface to an average thickness of of 50mm using 45mm IRC size HBG metal

km 0/0 - 1/0

km 1/0 - 2/0

km 2/0 - 3/0

KM 3/0 - 4/0

KM 4/0 - 5/0

KM 5/0 - 6/0

KM 6/0 - 6/700

Advance patch work for making up the undulation in the existing B.T surface to an average thickness of of 25mm using 13.20mm IRC size HBG metal

km 0/0 - 1/0

km 1/0 - 2/0

km 2/0 - 3/0

KM 3/0 - 4/0

KM 4/0 - 5/0

KM 5/0 - 6/0

KM 6/0 - 6/700

Providing and laying TACK COAT over the Bt surface using 3.00 Kg of bituminous emulsion for 10 sqm. Including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour charges for preparing the surface for laying tack coat and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of MOST specification.

BITUMINOUS CONCRETE 25 MM THICK USING cmp (Grade-II) Providing and laying Bituminious concrete to 40mm thick using 0.13cum of 13.20-11.20mm. 0.17cum of 6.7-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface

a. 60 cm Equilateral triangle cautionary signboard

Provision of Rumble Strips with Premix Bituminous carpet Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.

Road Marking with Hot applied Thermoplastic compound with Reflectorising Glass beads on Bituminous Surface

Supplying and fixing of HM stone of size 0.75x 0.23x 0.10m

Provision for Speed Breaker

Routine Maintenance** after completion of construction works (Lump-sum Amount for each year Per Km

For 1st year

For 2nd year

For 3rd Year

For 4th Year

For 5th Year

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}