Rural Development And Panchayat Raj Department Tender

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. roof beam

Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.

Weathering course with brick jelly lime concrete including cost and convetance and labour charges etc complete.

Providing pressed tiles set in cm 1:3 including cost and conveyance and all labour charges etc.

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coat with Oilbound Distember of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using enamal paint including cost and conveyance and all labour charges etc.

Painting two coats using enamal paint including cost and conveyance and all labour charges etc.

Temple Pattern Ornamental Doors with high quality Burma Teakwood with 2” minimum to 7” maximum thick ornamental frames, 2” thick to 5” thick Kamala (Flower Planks), Creeper, Birds, Animal Figures, Sculptures, etc. Backside 1” thick to 3” plank including necessary carving, shaping, wastage, etc., as per approved plan and design.

Cost and supply of steel door od size 0.90 x 2.00 inulding cost and conveyar of all lbour chrges etc complete

Cost and supply of steel grill window inuclidng conveyar of all lbour chrges etc complete

Cost and supply of UPVC window inuclidng conveyar of all lobour chrges etc complete

Supply and fixing for rain water 110mm dia pvc pipe including all charges etc complete

Provision forLight and fan point

Provision for Plug point

Provision for48 " Ceiling fan

Provision for40 W Tub light

Bulk head fitting

GST 18%