Rural Development And Panchayat Raj Department Tender

Km 0/0-1/0

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Km 0/0-1/0

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Km 0/0-1/0

Applying TACK COAT over WBM surface at 4Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and laying open graded premix carpet of 20mm compacted thick using 0.18cum of 13.20mm IRC size HBG machine crushed chips and 0.09 cum of 11.20mm IRC HBG machine crushed chips with 14.60Kg of bitumen for 10 Sqm. of premix carpet including laying of seal coat 'A' over the premix carpet using 0.09 cum of 6.70mm IRC size HBG machine crushed chips with 9.80Kg of bitumen per 10 Sqm. including cost and conveyance of chips and stacking them to departmental gauge for pre-measurements including cost of bitumen which will be supplied by the department at departmental section stores and its cost will be recovered as per special condition appended including heating the bitumen and metal mixing the materials in mini hot mix plant for premix carpet including spreading the same and finishing and compacting the same by power rolling to the specified lines and grades including all labour charges application of bitumen for seal coat over the premix carpet and spreading the seal coat and power roller rolling separately as per MOST specification 509 and 513 (III revision) including all labour charges hire and fuel charges for mini hot mix plant, power roller 80-100KN capacity and all other tools and plants employed therefor etc.com.

Km 0/0-1/0

Supply and fixing of Signboard including cost and conveyance to worksite and fixing in position as directed by the departmental officers and all other incidental charges etc., complete

Supply and fixing of Nameboard including cost and conveyance to worksite and fixing in position as directed by the departmental officers and all other incidental charges etc., complete

Name of Work: Strengthening the Kondaiyampalayam Indirapuram AD Colony Road Km 0/0-0/270 (R209)

Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for cutting side drain etc, complete. As per SS20 A

Providing and laying including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and ciompacting by power roller to achieve the required proctor density at 100% compaction at OMC and hire fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing dangerlights etc, comp for base course and side berms

Km 0/0-1/0

Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m

Km 0/0-1/0

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Km 0/0-1/0

Applying TACK COAT over WBM surface at 4Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Km 0/0-1/0

Supply and fixing of Sign Board including cost and conveyance to worksite and fixing in position as directed by the departmental officers and all other incidental charges etc., complete

Supply and fixing of Nameboard including cost and conveyance to worksite and fixing in position as directed by the departmental officers and all other incidental charges etc., complete

Name of Work: Upgrading the road from Anna nagar ST Colony OHT to Vilaiyattumariamman Koil Road Km 0/0 to 0/345 (R274)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, scrubs, saplings and trees cut earlierand disposal of unserviceable materials to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201. etc. complete.

Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for cutting side drain etc, complete. As per SS20 A

Providing and laying including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and ciompacting by power roller to achieve the required proctor density at 100% compaction at OMC and hire fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing dangerlights etc, comp for base course and side berms

Km 0/0-1/0

Providing and laying Water Bound Macadam Grading - III(63mm to11.20mm)IRC HBG of 75mm consolidated thickness consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively) and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer as per clause 405 of MORD revision I(Mix -in - place method) Rate for 10sqm

Km 0/0-1/0

Applying TACK COAT over WBM surface at 4Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Km 0/0-1/0

Supply and fixing of Nameboard including cost and conveyance to worksite and fixing in position as directed by the departmental officers and all other incidental charges etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. {GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}