Rural Development And Panchayat Raj Department Tender

Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. Main Column, Toilet Column, Grade Beam, Main wall alround, Toilet wall alround, D/F Column Area, D/F Column Area, Flooring, Hall, Toilet, D/F WC, Step

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. Basement, Main wall alround, toilet wall alround, super structure - Wall alround upto lintel, toilet wall alround, parapet alround, Step I, Step II, Step III, Step IV, Door D Door D1, Windows W, Ventilator, Coloumn Portion.

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle Column, Column upto grade beam, column upto grade beam, Grade beam inner, Alround, Alround Toilet

Basement to Top of Parapet For Columns For Columns Toilet

Lintel - Alround, Alround Roof Beam - Alround, Beam Sides Roof Slab - Ceiling - Hall, Toilet, Outsides alround, Bottom - Door D, Door D1, Windows

Sunshade - window, frount sunshade, sides, loft in store, rear side windows

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs Column Matt, Coping, Column, Coping, Grade beam, alround, for columns, for columns toilet, roof level beam, alround, beam alround, sunshade front, rear side windows, roof slab, Toilet Roof Slab

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. Ceiling, Hall, Beam sides, sunshade, sunshade bottom & Top, Alround front, front sunshade, sides

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. Inside Allround, Toilet allround, outer alround, toilet sides, soffits, Door D, Door D1, Windows W, Jolly, Parapet Top Step Sides 1, Step sides 2, Door D, Door D1, Windows W, Jolly, Wall Tiles

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses Main Building, Toilet Portion

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth Main Building, Splash Protion, Toilet Portion, Splash Portion

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) Flooring, Hall , Side Alround

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including finishing the joints neatly completed. Toilet, D/F WC

Dadooing walls with Colour Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard. Toilet sides Alround, D/F Door D

Distembering two coats using best approved Interiar oil destember with one coat primer over New plastered Surface including cost and conveyance of materials and labour charges etc complete. Ceiling, Hall, Beam sides, toilet, bottom, Door D, Door D1, Windows W, Jolly, sunshade bottom, front sunshade bottom, inside alround, toilet alround, soffits, Door D, Door D1, Windows W, Jolly, Door D, Door D1, Windows W, Jolly, Wall Tiles

Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Schedule ItemNo.359 – B) Outer alround, toilet sides, parapet top, sunshade side, front sunshade side, Door D, Windows W, Ventilator

Painting two Coats over New iron Works using best quality of enamel paint including cost and conveyance of materials and labour charges etc complete. Door D, Door D1, Windows W, Ventilator

Supply and cost of steel door, window, Ventilator Door D (1.00x 2.00m)

Door D1 (0.85 x 2.00m)

Windows (0.90 x 1.20m)

Jolly (0.60x0.45m)

Fixing charges for doors, windows and ventilators Door D (1.00x 2.00m) Door D1 (0.85 x 2.00m)

Windows (0.90 x 1.20m) Jolly (0.60x0.45m)

Provision for Electrification arrangements Light & Fan Point SD.no.23

Supply&Fixing of Tube Light SD.no.88

CFL SD.no.80

Supply&Fixing of Street light SD No.94

Supply & Fixing of Fan SD.no.110

Plug Point SD.no.36

Power Plug Point SD.no.39

S & Fixing DP Main switch SD.no.142

S & FixingTNEB Meter board SD.no.125

Service pipe SD.no.73

Service Connection SD.no.68

Service Charge to EB

Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends,& clamps etc.,

Provision for RWHS including pipes & specials etc., all complete

Provision of wash basin

Provision of EWC,

Provision of Leach Pit arrangements

Provision for Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}