Rural Development And Panchayat Raj Department Tender

Collection of Carted earth from approved quarry an average lead 1Km including cost and conveyance of all materials to site and labour charges etc.,

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in Subbase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Applying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (with definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of25mmx25mmx3mm Mild Steel angle and supported on a mild steelangle post 75X75X6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60m belowground level. The sign post should be painted as per IRC 67-2012 andfirmly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cmX45cmX60cm size including costand conveyance of all materials, equipment, Machinery and labour withall leads and lifts, loading charges necessary for satisfactory completionof the work as directed by the engineer-in-charge. High intensity Retro -Reflectro sheet shall consist of minimum coefficient of Retro-reflectionas per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall becovered under 7 year warranty issued for field performance and acertified copy of three years outdoor exposure report shall be obtainedas per IRC 67:2012 . ( as per MoRT&H Specification No.801) 60 cmequilateral triangle

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 60 cm Circular signBoard)

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

2.Strengthening of the Road from A.S.Kulam - Sengadu road Km 0/0 - 1/55 H/O A.S.Kulam (R-76)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201 in all etc complete

Picking the existing BT surface and sectioning including all labour charges etc, complete.

Collection of Carted earth from approved quarry an average lead 1Km including cost and conveyance of all materials to site and labour charges etc.,

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in Subbase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Applying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 90 cm octagon

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 60 cm Equilateraltriangle cautionary signboard

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (with definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of25mmx25mmx3mm Mild Steel angle and supported on a mild steelangle post 75X75X6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60m belowground level. The sign post should be painted as per IRC 67-2012 andfirmly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cmX45cmX60cm size including costand conveyance of all materials, equipment, Machinery and labour withall leads and lifts, loading charges necessary for satisfactory completionof the work as directed by the engineer-in-charge. High intensity Retro -Reflectro sheet shall consist of minimum coefficient of Retro-reflectionas per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall becovered under 7 year warranty issued for field performance and acertified copy of three years outdoor exposure report shall be obtainedas per IRC 67:2012 . ( as per MoRT&H Specification No.801) 60 cmcircular

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction & maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (for Construction & maintenance) above this row in column "BB" for all works in this package}