Rural Development And Panchayat Raj Department Tender

Excavation in Soil using Hydraulic Excavator and Tipper with diposal upto 1000m

KM 0/0-1/000

KM 1/000-1/375

Construction of Embankment with Material Obtained From Roadway Cutting

KM 0/0-1/000

KM 1/000-1/375

Gravel Sholder

KM 0/0-1/000

KM 1/000-1/375

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete

KM 0/0-1/000

KM 1/000-1/375

Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it for all including all cost and Convenyance for etc Complete

KM 0/0-1/000

KM 1/000-1/375

Providing and laying Tack coat over WMM surface(treated with primer) using 2.5Kg of bitumen emulsion RS-1 for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc all including all cost and Convenyance for etc Complete

KM 0/0-1/000

KM 1/000-1/375

BITUMINOUS MACADAM 50 MM THICK

KM 0/0-1/000

KM 1/000-1/375

Providing and laying Bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5

KM 0/0-1/000

KM 1/000-1/375

Providing and laying if hot applied Thermoplastic compound 2.5mm thick including reflectirising glass beads @ 250 gms per Sq.M area. Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes etc. complete as per MORT&H specification No.803.

60CM Equilateral triangale Cautionary Signboard

Provision for 60 cm Circle(MANDATORY SIGN)

Provision for Chevron Signs 90 cm

Provision for Reflector

HM Stone

KM Stone

Guard Stone

Provision for Photo

Providing Name Board cum Citizen Board

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}