Rural Development And Panchayat Raj Department Tender

Fabrication and supply & Delivery of MILD STEEL DOORS of the following sizes with Single Leaf outer frame made of 35x35x5 mm equal M.S L angle and shutter frame made of 25 x25 x5mm equal M.S. L angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2 Nos. Horizontal and 3 Nos. diagonal using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of holdfasts made of 35x35x5 mm equal M.S L angle, 1 No. of wind appliance, 2 Nos. of tower bolts,1 No of aldrop,2 Nos of handles, fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer for for MPCS building, Community Hall (TypeI,TypeII &TypeIII) Noon Meal Centre & Kitchen Shed. Size 0.90 x 2.10m

Fabrication and supply & Delivery of MILD STEEL DOORS of the following Size with Double Leaf outer frame made of 35x35x5 mm equal M.S.L angle and shutter frame made of 25x25x5mm equal M.S L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos horizontal, 3 Nos. diagonal for each shutter using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of hold fasts made of 35x35x5 mm equal M.S L angle , 2 Nos. of wind appliances, 3 Nos. of tower bolts,1 No aldrop, 3 Nos. of handles fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer for primary / Middle School building, SHG, Rural Library, Community Hall (TypeI & TypeIII) ,VAO & MPCS building. Size 1.20 x 2.10 m

Fabrication and supply & Delivery of MILD STEEL DOORS of the following Size with Double Leaf outer frame made of 35x35x5 mm equal M.S.L angle and shutter frame made of 25x25x5mm equal M.S L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos horizontal, 3 Nos. diagonal for each shutter using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of hold fasts made of 35x35x5 mm equal M.S L angle, 2 Nos. of wind appliances, 3 Nos. of tower bolts,1 No aldrop, 3 Nos. of handles fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer for Panchayat Office building Size 1.10 x 2.10m

Fabrication and supply & Delivery of MILD STEEL DOORS without outer frame of the following size with Single Leaf shutter frame made of 25x25x5 mm equal M.S. L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos. Horizontal 3 Nos. Diagonal using M.S flat of 20x5mm fully covered with 22 gauge plain G.I (Zinc) full sheet welded with shutter frame neatly and also fixing by welding 3 Nos. of pivot hinges (Kondis), 1 Nos. of aldrop, 1 No of tower bolt, 2Nos of handles including painting the whole unit with one coat of best quality of red oxide primer for PDS, School toilet (Boys & Girls ),SHG & VAO toilet. (Lintel height is 2m above floor level) Size 0.75 x 1.8 m

Fabrication and supply & Delivery of MILD STEEL DOORS of the following Size with Double Leaf outer frame made of 35x35x5 mm equal M.S.L angle and shutter frame made of 25x25x5mm equal M.S L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos horizontal, 3 Nos. diagonal for each shutter using MS flat of size 20x5mm fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 Nos. of hold fasts made of 35x35x5 mm equal M.S L angle , 2 Nos. of wind appliances, 3 Nos. of tower bolts,1 No aldrop, 3 Nos. of handles fixing the shutter with 6 Nos. of 6 inch hinges with outer frame of the door including painting the whole unit with one coat of best quality of red oxide primer for Community Hall (TypeI, TypeII & TypeIII ). Size 1.80 x 2.10m

Fabrication and supply & Delivery of MILD STEEL DOORS without outer frame of the following size with Single Leaf shutter frame made of 25x25x5 mm equal M.S. L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 1 No. Horizontal 2 Nos. Diagonal using M.S flat of 20x5mm fully covered with 22 gauge plain G.I (Zinc) full sheet welded with shutter frame neatly and also fixing by welding 2 Nos. of pivot hinges (Kondis), 1 Nos. of aldrop, 1 No of tower bolt,2Nos of handles including painting the whole unit with one coat of best quality of red oxide primer for Noon Meal Centre toilet . Size 0.75 x 1.2 m

Fabrication and supply of MILD STEEL WINDOW of the following size with Double Leaves outer frame made of 35x35x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, Shutter Frame made of 25 x 25 x 5mm equal M.S.L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 No. Horizontal for each shutter using 25 x 25 x 5mm equal M.S. T section fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,4 Nos. of hold fasts made of 35x35x5 mm equal M.S.L angle , 2 Nos. of peg stays with holes for keeping the windows open in different positions, 2 Nos. of locking handles, fixing the shutter with 4 Nos. of 4 inch hinges with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for Primary Middle School building, KitchenShed, SHG, Panchayat Office building,VAO, CommunityHall(TypeIII) Noon Meal Centre & MPCS building. Size 1.20 x 1.30 m

Fabrication and supply of MILD STEEL WINDOW of the following size with Double Leaves outer frame made of 35x35x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, Shutter Frame made of 25 x 25 x 5mm equal M.S.L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 No. Horizontal for each shutter using 25 x 25 x 5mm equal M.S. T section fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,4 Nos. of hold fasts made of 35x35x5 mm equal M.S.L angle, 2 Nos. of peg stays with holes for keeping the windows open in different positions, 2 Nos. of locking handles, fixing the shutter with 4 Nos. of 4 inch hinges with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for CommunityHall (Type I & TypeII) & PDS Size 0.90 x 1.30 m

Fabrication and supply of MILD STEEL WINDOW of the following size with Three Leaves outer frame made of 35x35x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, Shutter Frame made of 25 x 25 x 5mm equal M.S.L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 No. Horizontal for each shutter using 25 x 25 x 5mm equal M.S. T section and fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,6 Nos. of hold fasts made of 35x35x5 mm equal M.S.L angle, 3 Nos. of peg stays with holes for keeping the windows open in different positions, 3 Nos. of locking handles, fixing the shutter with 6 Nos. of 4 inch hinges with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for Community Hall(TypeI,TypeII,TypeIII). Size 1.50 x 1.30 m

Fabrication and supply of MILD STEEL WINDOW of the following size with Four Leaves outer frame made of 35x35x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, Shutter Frame made of 25 x 25 x 5mm equal M.S.L angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 No. Horizontal for each shutter using 25 x 25 x 5mm equal M.S. T section fully covered with 18 gauge plain M.S full sheet welded with shutter frame neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,6 Nos. of hold fasts made of 35x35x5 mm equal M.S.L angle , 4 Nos. of peg stays with holes for keeping the windows open in different positions,4 Nos. of locking handles, fixing the shutter with 8 Nos. of 4 inch hinges with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for Rural Library. Size 1.80 x 1.30 m

Fabrication and supply of See Through window with Grills and weld mesh (fixed) MILD STEEL WINDOW of the following size with outer frame made of 25x25x5 mm equal M.S.L angle, mullion section made of 25x25x5mm equal T section, fully covered with 20x50mm 10 G weld mesh and wire mesh and weld mesh to be welded to outer frame along with 4nos of 50 x 5mm M.S flat Horizontal members neatly and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame,4 Nos. of hold fasts made of 25x25x5 mm equal M.S.L angle to be welded with outer frame of the window including painting the whole unit with one coat of best quality of red oxide primer for PDS. Size 0.75 x 0.90 m

Fabrication and supply of ‘N’ TYPE MILD STEEL GLAZED VENTILATORS (in two parts) of the following size outer frame made of 25x25x5mm equal M.S.L angle with intermediate rails using 25 x25 x 5mm M.S.T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by welding protective grill with 12mm square MS rod at an interval of not greater than 10cm centre to centre to the outer frame and 4 Nos. of hold fasts connecting the 2 parts at 75mm clear and with 45 degree inclination with 25x25mm 10 G weld mesh and wire mesh including painting the whole unit with one coat of best quality of red oxide primer for Noon Meal Centre,Kitchen Shed, Community Hall(TypeI,TypeII,TypeIII) & Cement Godown. Size 0.90 x 0.45 m

Fabrication and supply of ‘N’ TYPE MILD STEEL GLAZED VENTILATORS (in two parts) of the following size outer frame made of 25x25x5mm equal M.S.L angle with intermediate rails using 25 x25 x 5mm M.S.T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by welding protective grill with 12mm square MS rod at an interval of not greater than 10cm centre to centre to the outer frame and 4 Nos. of hold fasts connecting the 2 parts at 75mm clear and with 45 degree inclination with 25x25mm 10 G weld mesh and wire mesh including painting the whole unit with one coat of best quality of red oxide primer for Community Hall(TypeI,TypeII,TypeIII). Size 0.60 x 0.45 m

Fabrication and supply of ‘N’ TYPE MILD STEEL GLAZED VENTILATORS (in two parts) of the following size outer frame made of 25x25x5mm equal M.S.L angle with intermediate rails using 25 x25 x 5mm M.S.T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by welding protective grill with 12mm square MS rod at an interval of not greater than 10cm centre to centre to the outer frame and 4 Nos. of hold fasts connecting the 2 parts at 75mm clear and with 45 degree inclination with 25x25mm 10 G weld mesh and wire mesh including painting the whole unit with one coat of best quality of red oxide primer for PDS outlet. Size 0.90 x 0.60 m