Rural Development And Panchayat Raj Department Tender

Providing and laying PRIME COAT using slow setting emulsion bitumen Grade I at the rate of 7kg/10sqm over the WMM surface preparatory to another bituminous construction over it. KM 0/000 - 1/100

Providing and laying TACK COAT over WMM surface (treated with primer) using 2.5kg of bitumen emulsion RS-1 for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery,fuel and all other incidental charges etc., KM 0/000 - 1/100

Providing and laying Bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonnes vibratory/phenumatic roller to the required density etc., including labour for attending to paver to site etc.including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks,paver finisher/9m paver finisher,vibratory/phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clauses 507 of MORTH Part-5 KM 0/000 - 1/100

Spreading the collected US gravel to watering and hand roller rolling including cost and supply of well Gravel from approved quarry and stacking to departmental gauge for premeasurements etc complete as per standard specifications and as directed by the departmental officers KM 0/000 - 1/000.

KM 1/000 - 1/100.

Provision for HM Stone charges etc complete

Provision for KM Stone charges etc complete

Provision for sign board 60cm Triangle Cautionary Board

Road Marking with Hot Applied thermoplastic compound with reflectorising Glass beeds on bituminous surface providing and laying of hot applied thermoplastic compound 2.5mm thick including reflecctorising Glass beeds at 250gms per sqm area ,thickness of 2.50mm is exclusive of surface applied glass beeds as per IRC 35 . The finished surface to level uniform and free from streeks and holes extra complete as per MORTH specification no 803.KM 0/0-1/100

Construction of 1.50M RCC slab Culvert @ Ch 387m Earth work excavation in hard gravelly soil with initial lead and lift as per SS20 B for Foundation in narrow trench.

P.C.C 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyance to site and all labour charges etc ., complete.

Plain cement concrete in 1:3:6 using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.

Plain cement concrete in 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.Superstructure

Plain cement concrete in 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.Bed Block

Providing plain reinforced concrete in mix 1:11/2:3 using 20mm HBG metal including cost conveyance of all labnour charges etc completed

Supplying and erection centering for sides and soffits inculding cost and conveyance of all materials to site and all labour charges,etc., complete Below Sill level

Above Sill level

Suppling Fitting and palcing HYSD bar reinfourcement (Fe 415) in super structure complete as per drawing and technical specification as per clause 1002,1010 and 1202 for MORD

Providing and fixing 20mm Bitumen felt for expansion joint Between Dirtwall & Deck Slab

Providing and fixing Tar Paper for bearing between Bed Block and Deck slab

Provision PVC pipes 110mm 4KG for WEEP holes etc., Complete

Filling the Well gravel including cost and conveyance of materials to worksote etc complete.

Construction of 1.50M RCC slab Culvert @ Ch 1095m Earth work excavation in hard gravelly soil with initial lead and lift as per SS20 B for Foundation in narrow trench.

P.C.C 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyance to site and all labour charges etc ., complete.

Plain cement concrete in 1:3:6 using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.

Plain cement concrete in 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.Superstructure

Plain cement concrete in 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges, etc., complete.Bed Block

Providing plain reinforced concrete in mix 1:11/2:3 using 20mm HBG metal including cost conveyance of all labnour charges etc completed

Supplying and erection centering for sides and soffits inculding cost and conveyance of all materials to site and all labour charges,etc., complete Below Sill level

Above Sill level

Suppling Fitting and palcing HYSD bar reinfourcement (Fe 415) in super structure complete as per drawing and technical specification as per clause 1002,1010 and 1202 for MORD

Providing and fixing 20mm Bitumen felt for expansion joint Between Dirtwall & Deck Slab

Providing and fixing Tar Paper for bearing between Bed Block and Deck slab

Provision PVC pipes 110mm 4KG for WEEP holes etc., Complete

Filling the Well gravel including cost and conveyance of materials to worksote etc complete.

Provision for Name Board Cum Citizen Board

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)