Rural Development And Panchayat Raj Department Tender

Plain Cement Concrete 1 : 4 :8 ( one part of cement, four parts of sand and eight parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Refilling the approved good quality earth in plinths, area development etc. wherever specified in layers is not exceeding 200 mm thick, with available earth at site.

Supplying and filling of good earth filling locally available earth transported from the outside including consolidation, leveling specified in layers of not exceeding 200 mm thick., etc. complete.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification.(Payment for centering shall be given after the concrete is laid).

Upto Basement

Ground Floor

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement ratio with plasticizer using 20mm and down concrete structural elements under controlled water graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the depart- mental officers comple.-1m3

Foundation & Basement

Ground Floor

Steel - Fe 500 D: Supply, fabrication and placing of reinforcement steel of high yield strength ribbed bars of various diameters and grade conforming to IS 1786 for reinforced concrete work. The work includes recoiling, straightening, cutting, bending, fabricating, and placing in position, at all levels including lead and lift, according to drawings, specifications etc. complete and supply & use of 18G black annealed binding wire double fold to tie the bars in position and providing precast cement/ PVC cover blocks for main reinforcement to ensure specified cover and complete., including all labor charges etc as directed by departmental officers.

Brick work in following Cement Mortar 1:5 using best quality Country bricks of size 8"3/4 x 41/4" X2 3/4" for foundation and basement including curing etc., complete complying with standard specification. Including scaffolding curing cost of reinforcement etc. all complete as per specifications and drawings as directed by the Engineer in-charge.

Foundation basement

Ground floor

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Finishing the top of roof with one course of Machine pressed tiles of size 23x23x2cm in 1:3 12mm thick using WCC

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Providing & applying 12 mm thick cement plaster in CM 1:5 (1 part of cement: 5 parts of sand) to walls internally in single coat at all levels to correct line and level including chicken wire mesh at all joints of brick and concrete surfaces with minimum overlap of 150 mm in all directions, scaffolding, rounding off or chambering of corners, offsets, fin/ bands, projections, etc. and cleaning of surface, raking out joints, roughening of surface, chiseling the undulated surface wherever necessary and curing, etc., all materials and labor complete in all respects including all lead, lift and descent and as directed

Provding the floor with kota stone slab of size 600x600 of 18/20 mm antiskid in alla floors laid in cm 1:3 20mm thick and pointed with colour perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc the kota stone slabs and other materilas to be used

Providing Granolithic floor finish in cemnet concrete 1:2:4 mix using 10-12 mm ISS metal to 25mm thick (using msand)including cost and conveyance of all materilas to site and all labour charges for mixing, Laying, curing etc complete for 10 cum

Dadooing of walls with colour printed glazed tiles of size 15cmx15cmx6 mm of best quality. including cost and conveyance of all materials to site and labour charges etc, complete

Emulsion Painting two coats and with best quality and colour paint over one coat of base coat including cost and conveyance of all materials to work site and labour charges etc

Painting Two coats with Oil bound distember two coats including cost and conveyance and all labour charges etc complete

Painting two coats with approved colour and quality of enamel paint over the iron works including cost and conveyance of all materils to site and labour charges etc. complete.

Supply and fixing in position European type water closet quality and approved make with 100mm p or s trap with double flapped rigit PVC seat level flusing etc

Supply and fixing in position ordinay colour galzed indian type water closet quality and approved make with 100mm p or s trap with double flapped rigit PVC seat level flusing etc

Supply and fixing of CI manhole with over and frame for septic tank manhole in position

Supplying and fixing PVC rain water down fall pipe 110mm dia with necessary shoes, bends & clamps etc

Supply and fixing of Cudappah slab 20mm thick including cost and convayance all labour charges etc, complete .

Supplying and fixing of doors and windows including all labour charges

Door D

Door D1

Door D2

Window W1

Window W

Rolling Shutter

Ventilator V1

Ventilator V2

Supplying and fabrication of the following rolling Shutters including cost and conveyance and all charges etc complete.

Supplying and fixing in position best approved of BIS quality PVC rain water down fa|l pipes of 110mm dia., having a pressure of 4 kg. / sq.cm including cost of necessary ‹PVC shoe, PVC bend. cast iron gratings of required diameter and special clamps, brass screw’s, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc.. complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in ‘z.‘all with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification

Supplyfng and fixing cf MS grill or approved design for grill gate grill work to doors and windows is openings etc using necessary mild steel etc complete complying with standard specification

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is pro«ided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intaci. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos of hinges in douhle leaves shutter to be provided 6nos. of holdfasts 120 min in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2ncs. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Ks! is provide°.d on the one shut er I conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. A!I members are given a coat of red oxide primer as directed by the departmental officer's. The rate includes cost of ail materials. labour charges, transportation to site of work, loading, un loading and all other incidental charges etc.,

Fabrication, supply and fixing in position of ’N’ type ventilators using M.S. angle of size 25 x 25 x5 mm for frame an¢! M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm ’T‘ section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original ronrJitinn s afirr fininn as rlirectecl lv the ne no rtmenta

Fabricatig supplying and fixing in position of steel sheeted windows made of Z section F7D of size 33x25x3 mm at 1.419kg/m and shuttter section made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter to be cvered with 18 gauge cold rolled sheet of superior qualify and welded intact with shutter framessection at suitable place to ca tch the window handIe each window sh fitter ha ving an md bistable stay made out of 18 x Smm at 0.70 kg/ m MS flat of lenght 320nlm with three adjustable position A matching peg is provided in the outer frame of the window at si.!itable place. 4 Ncs. o! held fasts of l20mr !engtñ spliced at the ends are welded to the outer frame of the window by using MS flat of 18xñmm at 0.70kg/m, welded tc the shutter at two place equivalent from each from top and bottom of the shutter.

Provision for wash basin

ELECTRICAL ARRANGEMENTS

Light point / Fan point SD25

Bulk Head fiting with 40w BULB SD 81

SD 88 4ft 40W tube

SD127 TN meter board

SD12 concealed plug point

SD107ceiling fan 1200mm

SERVICE CONNECTION

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)