Rural Development And Panchayat Raj Department Tender

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Collection of Carted earth from approved quarry an average lead 1Km including cost and conveyance of all materials to site and labour charges etc.,

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC 67:2012 . ( as per MoRT&H Specification No.801) 60 cm Equilateraltriangle cautionary signboard

Road Markers/Road Stud with Lens Reflector -- Providing and fixingreflective road studs of ‘category A’ Raised pavement markers made outof poly carbonate / methyl methercrylate/ABS moulded bodyconfirming to ASTM D 788 and reflective panels with micro prismaticlens capable of providing total internal reflection of the light enteringthe lens face with retro reflectance and chromaticity values conformingto ASTM D4280. The reflective raised pavement markers shall alsoconfirm to the MORTH circular No RW / NH. 33023/10/ 97-DO. III dt11.06.97. The height, width and length shall not be less than 15 mm, 90mm and 100 mm and with minimum reflective area of 13 Sq.cm on eachside and the slope to the base shall be 35 /- 5 degree. Each reflectorshall have a CIL not less than values specified in Table 2 of said MORTHcircular. The strength of detachment of the integrated cylindrical shanks,(of diameter not less than 19 /- 2mm and height not less than 30 /- 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will beby drilling holes on the road for the shanks to go inside, without nailsand using epoxy resin based adhesive as per manufacturer’srecommendation and complete as directed by the engineer. The markershall support a load of 13635 Kg tested in accordance with ASTM D4280and confirming to IRC 35 - 2015 guidelines and MoRT&H specification804 etc., complete

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 90 cm octagon

Supplying and fixing of Hecta Metre stones including painting and lettering as directed by the departmental officers etc., complete

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

2.Strengthening to the road from Maruthi nagar road Km 0/0-1/310 (R-159) H/O Kurudampalayam

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201 in all etc complete

Picking the existing BT surface and sectioning including all labour charges etc, complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) (GSB Grade III) Km 1/0 -1/125

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in Subbase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Applying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Collection of Carted earth from approved quarry an average lead 1Km including cost and conveyance of all materials to site and labour charges etc.,

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Supplying and fixing of Hecta Metre stones including painting and lettering as directed by the departmental officers etc., complete

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (with definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of25mmx25mmx3mm Mild Steel angle and supported on a mild steelangle post 75X75X6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60m belowground level. The sign post should be painted as per IRC 67-2012 andfirmly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cmX45cmX60cm size including costand conveyance of all materials, equipment, Machinery and labour withall leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. High intensity Retro -Reflectro sheet shall consist of minimum coefficient of Retro-reflectionas per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall becovered under 7 year warranty issued for field performance and acertified copy of three years outdoor exposure report shall be obtainedas per IRC 67:2012 . ( as per MoRT&H Specification No.801) 90 cmequilateral triangle

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC 67:2012 . ( as per MoRT&H Specification No.801) 60 cm Equilateraltriangle cautionary signboard

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 90 cm octagon

Road Markers/Road Stud with Lens Reflector -- Providing and fixingreflective road studs of ‘category A’ Raised pavement markers made outof poly carbonate / methyl methercrylate/ABS moulded bodyconfirming to ASTM D 788 and reflective panels with micro prismaticlens capable of providing total internal reflection of the light enteringthe lens face with retro reflectance and chromaticity values conformingto ASTM D4280. The reflective raised pavement markers shall alsoconfirm to the MORTH circular No RW / NH. 33023/10/ 97-DO. III dt11.06.97. The height, width and length shall not be less than 15 mm, 90mm and 100 mm and with minimum reflective area of 13 Sq.cm on eachside and the slope to the base shall be 35 /- 5 degree. Each reflectorshall have a CIL not less than values specified in Table 2 of said MORTHcircular. The strength of detachment of the integrated cylindrical shanks,(of diameter not less than 19 /- 2mm and height not less than 30 /- 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will beby drilling holes on the road for the shanks to go inside, without nailsand using epoxy resin based adhesive as per manufacturer’srecommendation and complete as directed by the engineer. The markershall support a load of 13635 Kg tested in accordance with ASTM D4280and confirming to IRC 35 - 2015 guidelines and MoRT&H specification804 etc., complete

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

3.Renewal BT Road from Km 9/8 of Chinnathadagam road to Nanjundapuram Km 0/0-1/2 (R-66) H/O 22, Nanjundapuram Panchayat

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201 in all etc complete

Advance patch work for making up the undulaion in the existing B.T.Surface to an average thickness of 50mm using 45mm IRC size HBG metal

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for spreading and compaction with power roller etc. Complete, for SHOULDERS

Supplying and fixing of Kilo Metre stones including painting and lettering as directed by the departmental officers etc., complete

Supplying and fixing of Hecta Metre stones including painting and lettering as directed by the departmental officers etc., complete

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) 60 cm Equilateraltriangle cautionary signboard

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) Chevron signs 90 cmOctogen ( Curves)

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (with definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of25mmx25mmx3mm Mild Steel angle and supported on a mild steelangle post 75X75X6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60m belowground level. The sign post should be painted as per IRC 67-2012 andfirmly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cmX45cmX60cm size including costand conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completionof the work as directed by the engineer-in-charge. High intensity Retro -Reflectro sheet shall consist of minimum coefficient of Retro-reflectionas per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall becovered under 7 year warranty issued for field performance and acertified copy of three years outdoor exposure report shall be obtainedas per IRC 67:2012 . ( as per MoRT&H Specification No.801) 90 cmequilateral triangle

Road Markers/Road Stud with Lens Reflector -- Providing and fixingreflective road studs of ‘category A’ Raised pavement markers made outof poly carbonate / methyl methercrylate/ABS moulded bodyconfirming to ASTM D 788 and reflective panels with micro prismaticlens capable of providing total internal reflection of the light enteringthe lens face with retro reflectance and chromaticity values conformingto ASTM D4280. The reflective raised pavement markers shall alsoconfirm to the MORTH circular No RW / NH. 33023/10/ 97-DO. III dt11.06.97. The height, width and length shall not be less than 15 mm, 90mm and 100 mm and with minimum reflective area of 13 Sq.cm on eachside and the slope to the base shall be 35 /- 5 degree. Each reflectorshall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks,(of diameter not less than 19 /- 2mm and height not less than 30 /- 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will beby drilling holes on the road for the shanks to go inside, without nailsand using epoxy resin based adhesive as per manufacturer’srecommendation and complete as directed by the engineer. The markershall support a load of 13635 Kg tested in accordance with ASTM D4280and confirming to IRC 35 - 2015 guidelines and MoRT&H specification804 etc., complete

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

4. Strengthening to the road from NGM road RV Nagar Km 0/0-0/520 (R164) H/O Kurudampalayam Panchayat

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes ,scrubs,saplings and trees of girths upto 300mm, removal of stumps of such trees cut earlie and disposal of unserviceable material and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness as per technical specification clause 201 in all etc complete

Picking the existing BT surface and sectioning including all labour charges etc, complete.

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in Subbase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Applying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. Comp.

Applying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m including labour for spraying, hire charges for bitumen sprayer etc. complete

Bituminous macadam of 50mm thick shall consists of construction in a single cause of compacted crushed aggreagates premixed with bituminous binder of 80/100 serve as base / binder course in accordance with MORTH rev IVcl.504 specification and in confirmity

Providing and laying Bituminious concrete which shall consists of construction of a single course binder /wearing corse on a previosly prepared Bituminous base to the requirements of the specification using 60/70 grade bitumen as per MorRTH specificaton CI.508.

Collection of Carted earth from approved quarry an average lead 1Km including cost and conveyance of all materials to site and labour charges etc.,

Supplying and fixing of Hecta Metre stones including painting and lettering as directed by the departmental officers etc., complete

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (without definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x25mmx3mm Mild Steel angle and supported on a mild steel angle post75X75X6mm with a clear height of not less than 2.10m from the groundlevel to the bottom of the sign board and 0.60m below ground level.The sign post should be painted as per IRC 67-2012 and firmly fixed tothe ground by means of properly designed foundation with M15 gradecement concrete 45cmX45cmX60cm size including cost and conveyanceof all materials, equipment, Machinery and labour with all leads and lifts,loading charges necessary for satisfactory completion of the work asdirected by the engineer-in-charge. High intensity Retro - Reflectrosheet shall consist of minimum coefficient of Retro-reflection as perTable 6.6 of IRC 67-2012. The retro - reflective sheeting shall be coveredunder 7 year warranty issued for field performance and a certified copyof three years outdoor exposure report shall be obtained as per IRC67:2012 . ( as per MoRT&H Specification No.801) Chevron signs 90 cmOctogen ( Curves)

Providing and erecting of Retro - Reflectorised Cautionary, Mandatoryand Informatory signs (with definition board) made out of HighIntensity Prismatic Grade Sheeting confirming to Type-IV standards ofIRC-67: 2012 and ASTM D 4956 –09, specification and fixed over 2mmthick Aluminium sheet fixed over a back supporting frame of25mmx25mmx3mm Mild Steel angle and supported on a mild steelangle post 75X75X6mm with a clear height of not less than 2.10m fromthe ground level to the bottom of the sign board and 0.60m belowground level. The sign post should be painted as per IRC 67-2012 and firmly fixed to the ground by means of properly designed foundationwith M15 grade cement concrete 45cmX45cmX60cm size including costand conveyance of all materials, equipment, Machinery and labour withall leads and lifts, loading charges necessary for satisfactory completionof the work as directed by the engineer-in-charge. High intensity Retro -Reflectro sheet shall consist of minimum coefficient of Retro-reflectionas per Table 6.6 of IRC 67-2012. The retro - reflective sheeting shall becovered under 7 year warranty issued for field performance and acertified copy of three years outdoor exposure report shall be obtainedas per IRC 67:2012 . ( as per MoRT&H Specification No.801) 60 cmcircular

Road Markers/Road Stud with Lens Reflector -- Providing and fixingreflective road studs of ‘category A’ Raised pavement markers made outof poly carbonate / methyl methercrylate/ABS moulded bodyconfirming to ASTM D 788 and reflective panels with micro prismaticlens capable of providing total internal reflection of the light enteringthe lens face with retro reflectance and chromaticity values conformingto ASTM D4280. The reflective raised pavement markers shall alsoconfirm to the MORTH circular No RW / NH. 33023/10/ 97-DO. III dt11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on eachside and the slope to the base shall be 35 /- 5 degree. Each reflectorshall have a CIL not less than values specified in Table 2 of said MORTHcircular. The strength of detachment of the integrated cylindrical shanks,(of diameter not less than 19 /- 2mm and height not less than 30 /- 2mm) from the body is to be a minimum value of 500 Kgf. Fixing will beby drilling holes on the road for the shanks to go inside, without nailsand using epoxy resin based adhesive as per manufacturer’srecommendation and complete as directed by the engineer. The markershall support a load of 13635 Kg tested in accordance with ASTM D4280and confirming to IRC 35 - 2015 guidelines and MoRT&H specification804 etc., complete

Provision of 5 Nos.Rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed,marked with white strips of road marking paint

Supplying and fixing of Name board cum Citizen board including painting and lettering as directed by the departmental officers etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction & maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (for Construction & maintenance) above this row in column "BB" for all works in this package}