Rural Development And Panchayat Raj Department Tender

Supplying and filling foundation and basement with filling sand in layers notmore than 15cm thick well ramed,watered and compacted Complete complying with standard specification.

Above Base

Suppling and fixing in position of Cudappa Slab 20mm Thick including cost and conveyance to work site and labour charges etc complete compling with standerd specification

Filling in Basment with Excavated earth in layer of not more than 15cm thick well ramed,watered and compacted Complete complying with standard specification.

RCC 1:1.5:3 Mixusing 20mm HBG metal for all RCC worksexcluding cost and fabrication of reinforcement grill including cost and conveyance and materials of all labour charges etc,.complete.

Supply and fixing of Position of Indian Type water closet 580 x 440 mm of approved quality

Supply and delivery of Mild Rolling shutter fixing size of 1.20x2.10 including cost and conveyance with transportion charges etc,.complete

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 18 Light Point & Fan Point

Providing and fixing PVC Rainwater Downfall pipes of 110mm dia with necessary shose,bends and other specials,clamps,screws,nails,teackwood plug etc.,

Plastering with in CM 1:5mix using 12mm thickincluding cost and conveyance and materials of all labour charges etc,.complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. The Putty shoule be got approved by the Executive Engineer before use on work.

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Painting two coats with approved ready enamel paint with Doors, Rolling shutter,grill gate and windows paint including cost and conveyance and materials of alllabour charges etc,.complete.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying and fabrication and placing position MS steel or Ribbed tor steel for all RCC works as per the design including necessary supports (MSRod or RTS bar will be supplied department) including binding wire charges etc,.

Paving the floor with Antiskid tiles of size 305 x 305 x 6 mm of any colour and any size laid in CM 1:2 mix using 10mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Two coat oil bound Distempering using best freshly burnt shell lime in all the floors including cost of lime,Blue,fevicol type gum,brushes scaffolding charges with all labour charges with standared specification etc,.complete.

Supply and fixing of fancy glass shade and 7W / 9W LED bulb SD 79

Supply and run of 2 of 4 Sq mm (56/0.3) PVC insulated SC unsheathed Cu conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 63

Below Base

Plastering with in CM 1:3mix using 10mm thickincluding cost and conveyance and materials of all labour charges etc,.complete.

Supply and fixing of Position of Europen Type water closet 580 x 440 mm of approved quality

1.Construction of Panchayat Office Building at Sivanvoyal Village in Sivanvoyal Panchayat

Towards cost and supply of Tube light Fittings with light including cost and convayance tosite and labour charges etc, complete.

Supply and fixing of Water TIGHT Bulk Head fitting with Guard for incandesent lamp with 60 W Bulb SD 83

Providing Granolithic pattern floor finish with CC 1:2:4 mix using 10to 12mmchips metalincluding cost and conveyance and materials of all labour charges etc,.complete.

Dadooing walls with glazed tiles of any colour and any size laid in CM 1:2 mix using 20mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Above Base

Above Base

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 x 25 x 3mm at 1.419kg/m and mullion "J" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0,70kg/m at 3Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly.

Wiring with 2 x 1.5 sqm PVC including unsheated Sc.alu cable of conductor of 1100V grade including for Open Plug Point SD 10

Supply and fixing of TNEB Meter Board Suitable for 32 A single phase sc with 32 A Fuse Unit etc., SD 125

Brickworkin CM1:5 Mix using C,bricks size of 23x11x75cm for following including cost and conveyance and materials of all labour charges with complying,curing with standared specification etc,.

Supply and delivery of PVC doors fixing size of 0.75x2.10 including cost and conveyance with transportion charges etc,.complete

Supply and fixing of Position of best quality make white glazed wash basin of size 550x400mm

Earth work excavation and depositing on bank with initial lead and lift in gravelly soil stiff in clay, hard stiff clay , murram boulders mixed with gravel as per SS 20-B for foundation. 0.m to 0.30m Depth

Supply and fixing of 1200 mm (48") AC ceiling fan (Conforming to ISS 374 / 1979) complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110)

Supply and fixing of PVC Water storage tank 500 liter Capacity

Paving the floor with scratch proof ceromic tiles of any colour and any size laid in CM 1:2 mix using 20mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Exterior Emulsion Paint two coats using best freshly burnt shell lime in all the floors including cost of lime,Blue,fevicol type gum,brushes scaffolding charges with all labour charges with standared specification etc,.complete.

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Plain Cement Concrete 1:4:8 mix using 40mm HBG metal from an approved quarry it from an site including cost and conveyance and materials of labour charges etc,.complete.