Public Works Department Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Feb 2025
Closing Soon27 Feb 2025
Tender Amount₹ 4,20,49,850
Costs
EMD
₹ 2,21,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_524518_1Tender No
NIT35 2024 25 B C M CIRCLE ERODE Dated 04 02 2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling, clearing away and carefully stacking materials useful for re-use for Pressed tiles & Weathering course
414.32
-
-
... More
Dismantling, clearing away and carefully stacking materials useful for re-use for Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs
963.31
-
-
... More
Conveyance excess Dismantled debris from site 0 to 5 km etc., as per standard specifications and as directed by the departmental officers
672.13
-
-
... More
Earthwork excavation for foundation in all soils and sub soils and to full depth as may be directed in the following type of soils except in rock requiring blasting but inclusive of shorting, strutting and baling outwater wherever necessary and refilling the sides of layer not more than 15 cm., thick well rammed and consolidated
depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead and lift and levelling the same etc., complete
899
-
-
... More
Earth Work Open Excavation in All Soils and sub soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring, shuttering, bailding out water wherever nece- ssary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150 mm thick layers well rammed and depositing the surplus earth with in the compound in place shown by the departmental officers with initial lead and lift and clearing and levelling
83
-
-
... More
Supplying and filling in foundation and basement
trenches, etc., with filling sand in layers of not
more than 15 cm. thick watered rammed and
well consolidated etc., complete complying with
245
-
-
... More
Conveyance of well Gravel for filling the basement with
a lead of 3 to 5 km including cost of gravel, loading,
unloading consolidation etc., complete complying with
standard specification and as directed by the
255.7
-
-
... More
Filling basement with excavated earth in layers of not
more than 15cm thick watered rammed well
consolidated etc, complete
215
-
-
... More
Cement concrete 1:5:10 ( one cement, five sand and
ten aggregate ) using 40 mm, gauge broken hard
granite stone jelly for foundation including dewatering if
found necessary and laid in layers of not more than 15
cm. thick complying with standard specification.
84.5
-
-
... More
Cement Concrete 1:5:10 (One cement, Five sand and
ten jelly) using 40 mm, size hard broken granite stone
jelly for flooring base including consolidating as
standard specification, curing and rendering the top
surface rough to receive floor finish etc. complete
83
-
-
... More
Brick work in Cement Mortar 1:3 (One cement ,three m sand) using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
-
-
-
... More
For Foundation and Basement.
19
-
-
... More
Brick work in Cement Mortar 1:5 (One cement ,five m sand) using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
-
-
-
... More
For Foundation and Basement.
67
-
-
... More
For Superstructure in Ground floor
3
-
-
... More
For SS in Second Floor
27.5
-
-
... More
Brick work in Cement Mortar 1:6 (One cement ,six m sand) using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
-
-
-
... More
For Foundation and Basement.
164.5
-
-
... More
For Superstructure in Ground floor
208.5
-
-
... More
For SS in First Floor
118
-
-
... More
For SS in Second Floor
11
-
-
... More
Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. Complete
-
-
-
... More
In Ground Floor 11.00 cm thick.
301
-
-
... More
For SS in First Floor
210
-
-
... More
Damp proof course in cement mortar 1:4 (One cement
and four sand) 12 mm. thick for brick masonry walls
with water proofing compound conforming to ISS at 2%
by weight of cement used etc., complete complying
with standard specification.
207
-
-
... More
Supplying and erecting shuttering including necessary
supports for plane surface in foundation and basement
for RCC Raft slab beams, columns footings, plinth
beam, steps, etc., using suitable mild steel sheets of
B.G. 10 stiffended with welded suitable mild steel
angles for boardings, supported by casurina props 10
cm to 13 cm., dia spaced at suitable intervals etc.,
complete complying with standard specification
539
-
-
... More
Supplying and erecting, centering for sides and soffits
including supports and strutting upto 3.29 M., high for
plane surfaces such as RCC slabs, Rectangular beams,
Tee (or) Ell beams, lintels, Bed Block, slabs, landing
beam, conapy side slab, or boxing (or) vertical slabs,
rectangular (or) square (or) round columns etc., as
detailed below with all cross bracings using M.S.Sheets
of size 90 cm x 60 cm., and B.G.10 Stiffended with
welded M.S.Angles of size 25mm x 25mm x 3mm., for
boarding laid over silver oak (or) country wood joist of
size 10cm.,x 6.5cm., spaced at about 90cm centre to
centre and supported by casurina props 10cm to 13cm
dia spaced out 75cm., centre to centre or at suitable
intervals etc., complete complying with standard
-
-
-
... More
For floor slabs, roof slab, rectangular beams, Ell
beams, lintals, landing waist, slab, conapy slabs, Bed
blocks etc.,
2313
-
-
... More
For rectangular or square RCC columns top and bottom
1081.6
-
-
... More
For plane surfaces such as vertical slab, side slabs of
boxing, vertical drops, facia, vertical wall, etc.
145
-
-
... More
Circular column
20
-
-
... More
Providing and laying in position, standardised concrete Mix M-2o Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete
-
-
-
... More
In foundation and basement
171
-
-
... More
In Ground floor
192.2
-
-
... More
In First floor
143
-
-
... More
In Second Floor
37
-
-
... More
Supplying, fabricating and placing in position steel
reinforcement using mild steel or ribbed for steels rods
for all RCC works as per the design given including cost
of steel and binding wire slab in all floors etc., complete
696
-
-
... More
Plain Cement concrete 1:2:4 (One Cement, Two Sand
and Four aggregate) using machine crushed 20 mm
gauge hard granite stone jelly for all concrete floor of
works excluding centering shuttering and as directed
etc complete complying with standard specification
5.2
-
-
... More
Casting and fixing of RCC Precast slab of the following
thickness in cement concrete 1:2:4 (one cement two
sand and four aggregate) excluding the cost of
reinforcement grill in position but including moulding
charges casting of slab finishing, curing and fixing in
position in all floors etc., complete
-
-
-
... More
50 mm thick using 20 mm size machine crushed hard granite stone jelly.
392.5
-
-
... More
75 mm thick using 20 mm size machine crushed hard granite stone jelly.
4
-
-
... More
Providing granolithic floor finish 40mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification
-
-
-
... More
40 mm thick
48.2
-
-
... More
Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.
614
-
-
... More
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
247
-
-
... More
Paving the floor with (Non Slipery) ceramic tiles of size
305 x 305 x 6 mm laid over 20 mm thick cement mortar
1:3 (One Cement and Three m Sand) base mortar over the
existing slab / floor including cutting the tiles to the
required size with special cutter wherever necessary,
laying in position and pointing with white cement mixed
with colouring pigment at the rate of 0.3 Kg. / sq.m.
etc., complete complying with standard specification.
176
-
-
... More
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 300x450x8mm set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers
311.5
-
-
... More
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.
92
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc.,
194
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
... More
One floor - 110 mm dia
16
-
-
... More
Two floor - 110 mm dia
96
-
-
... More
Three floor - 110 mm dia
4
-
-
... More
Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed
0.5
-
-
... More
Supplying and fixing M.S.Grill for opening corridor side 'ladder, Entrance Gate and Name board angles etc.,'using necessary M.S. flats for inner member and outermembers which should be fixed as directed by thedepartmental officers inclusive cost of providing one coat of best quality red oxide primer. The design of 'M.S.Grill should be got approved from departmental'officers before use on work. with standard specfication
4783
-
-
... More
Supplying and fixing in position Stainless Steel Handrail with Balustrades.The SS pipe will be made of 304G 1.5mm thickness of pipe.The The Balustrade using 50mm Dia Stainless Steel pipe in vertical post and in the center portion Horizontal pipes Dia 25mm x 2 Lines x 20mm x 2 Lines ( Designing work ) using pipe will be fixed for which design with stiffness. In the vertical post bottom of 50mm Dia base cup will be used and vertical post top using the size of 50mm Dia SS 'L' bow bend will be fixed in first vertical post over which the Balustrades the SS Handrail of size 50mm Dia pipe will be fixed and its to be fabricated with gas tungten are welding with fine finishing putting method and welding position with be finished polishing work including floor granite tiles drilling,fixing with Lock fix paste,with heat finishing and also inclusive of conveyance Loading and Unloading etc.,and as directed by the drawing and designin by the departmental officers.
30
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
33.5
-
-
... More
Stucco plastering 12mm thick using blue granite chips of size 10mm and below over the existing base plastering with cement mortar 1:5, 12mm thick, etc., complete complying with standard specifications (SI 314)
507
-
-
... More
Plastering with cement mortar 1:5 (one cement and five sand)12mm.thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors complying with standard specifications.
4540.5
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
1768
-
-
... More
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered to give a smooth and even surface.any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up thr undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering the same after it is dry and finishing the surface smoothly etc.,complete complying with standard specification and as directed by by the departmental officers.(The putty should be got approved by the Executive Engineer before use of work).
1228
-
-
... More
Plastering with Cement Mortar 1:3 (One cement andthree sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete
340
-
-
... More
Plastering the surface of walls with Cement Mortar 1:3(One cement and Three sand), 20mm thick with WPC mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors
176
-
-
... More
Plastering with cement mortar 1:3(one cement and three sand)12mm.thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors mixed with water proofing compound conforming to ISS at 2% by weght of cement used for dummy column etc., complete
82
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
-
-
-
... More
In Ground floor
14.2
-
-
... More
In First floor
44.7
-
-
... More
In Second Floor
1.7
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 16-18mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
775.5
-
-
... More
White washing one coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.
240
-
-
... More
White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.
144
-
-
... More
Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)
96
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
4381.5
-
-
... More
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
1598
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete
328.7
-
-
... More
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification.
93.7
-
-
... More
supplying and fixing of Hallow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of bottom thehold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.
91
-
-
... More
Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.
49.2
-
-
... More
Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KGI Cub. Mt & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-harge of the department.The WPC door shall be fixed onto the luminium "G type channel with Wheel and the door shall have 2 Hooks in Ss, 2 andles 4' in SS.(Sliding door)
2.1
-
-
... More
Manufacturing supplying and fixing of Teakwood ornamental Entrance door of size 2.40 x 2.40m with the following specification. The outer frame of ornamental Entrance Door of size 150 x 100mm. Teak wood scantling. The door consists of openable area 2.20 x 2.20m with Double leaf. The each openable shutter consists of Top Panel for 1.50m height and bottom vertival panel in for a height of 90cm. The shutter bottom rail is of 200 x 50mm size and middle top and side rails are of size 150 x 50mm with corner designed beading works. The shutter panel is of 40mm thick T.W.planks with special curving works. The outer frames corners are designed border works single side for entrance outer frame and on both sides for middle frame. The cost includes all kinds of furniture fittings such as brass aldrop, brass tower bolt, brass hinges, brass door stopper, brass handles. All themembers are finished with two coats of melamine polish outer the priming coat.
5.8
-
-
... More
Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops,3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
-
-
-
... More
Single Leaf
14.9
-
-
... More
Double Leaves
26.4
-
-
... More
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers.
-
-
-
... More
Single leaf
4.2
-
-
... More
Double leaf
3.2
-
-
... More
UPVC Window
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
128.3
-
-
... More
UPVC Ventilator
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
16.2
-
-
... More
Supplying and fixing in position Glazed steel ventilator with Side/Central hung shutters( Two Leaves) frames and made shutter frame made out of steel section conforming to IS 7452 /1990.The outer frame made out of z section (F7D) of size 33 x22 x3 mm conforming to IS 7452/1990.The mullions are made out of (F4B) section of size 46x25x3 mm and conforming to IS7452/1990.The shutters are individual and each of them can be operated separately.Sash bars are made of T section (T2) of size 25 x 22 x 3mm 2 nos of sturdy hinges and one number of handle cum latch of special type are fixed are each openable shutter with suitable opening in left for its easy operation, one member of adjustable strings with fixing brackets of sufficient length are provided for each shutter 4 nos of 40 x 40 x 3 mm angle hold fast 230mm length are welded with the frame at appropriate point M.S Square bars of 12 mm dia is welded to the inner face of the ventilator at equal intervals not exceeding 10 cm spacing 3mm pin headed glass is used for Glazing with good quality anf fixed with 15 x 12 mm teak wood beadings with screws for fixing .The shutters are to open outside.
2.2
-
-
... More
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
3
-
-
... More
Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work.
External Water Supply - Below Ground Level
-
-
-
... More
(a) 20 mm dia GI pipe
30
-
-
... More
(b) 25mm dia GI pipe
25
-
-
... More
(c) 32 mm dia GI pipe
20
-
-
... More
(d) 40 mm dia GI pipe
20
-
-
... More
Supplying, laying and jointing GI pipes of approved quality and best variety of B Class pipes of the following dia including labour for fixing GI Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. The pipes are to be painted with one coat of tar and tightly pastened with tar dipped gunny tape, etc., complete complying with standard specification. The G.I. pipes shall be got approved by the Executive Engineer before use on work. External Water Supply - Above Ground Level
-
-
-
... More
(a) 20 mm dia GI pipe
20
-
-
... More
(b) 25mm dia GI pipe
35
-
-
... More
(c) 32 mm dia GI pipe
24
-
-
... More
(d) 40 mm dia GI pipe
18
-
-
... More
Supplying and fixing in position GI unions of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete
-
-
-
... More
a) 20mm dia G.I Union
3
-
-
... More
b) 25mm dia G.I Union
4
-
-
... More
c) 32mm dia G.I Union
3
-
-
... More
d) 40mm dia G.I Union
2
-
-
... More
Supplying and fixing in position the following GI Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the GI specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete
-
-
-
... More
a) 20mm dia G.I Elbow
10
-
-
... More
b) 25mm dia G.I Elbow
12
-
-
... More
c) 32mm dia G.I Elbow
6
-
-
... More
d) 40mm dia G.I Elbow
4
-
-
... More
e) 20mm dia G.I Bend
4
-
-
... More
f) 25mm dia G.I Bend
3
-
-
... More
g) 32mm dia G.I Bend
1
-
-
... More
h) 20mm dia G.I Tee
5
-
-
... More
i) 25mm dia G.I Tee
7
-
-
... More
j) 32mm dia G.I Tee
6
-
-
... More
k) 40mm dia G.I Tee
3
-
-
... More
l) 15mm dia G.I Nipple
20
-
-
... More
m) 20mm dia G.I Nipple
15
-
-
... More
n) 25mm dia G.I Nipple
16
-
-
... More
o) 32mm dia G.I Nipple
6
-
-
... More
p) 40mm dia G.I Nipple
4
-
-
... More
q) 32x 25mm dia G.I Reducer
5
-
-
... More
r) 25x 20mm dia G.I Reducer
10
-
-
... More
s) 20x 15mm dia G.I Reducer
18
-
-
... More
Supplying and fixing in position best qualtiy and approved variety with ISI.mark Gun Metal Wheel Valve/Gate valve of the following die including necessary charges for cutting and threading of G.I.pipes for jointing the Gate valve in position etc., complete complying with standard specifications.
-
-
-
... More
a) 20 mm dia G.M. Gate Valve
5
-
-
... More
b) 25 mm dia G.M. Gate Valve
5
-
-
... More
c) 32 mm dia G.M. Gate Valve
3
-
-
... More
d) 40 mm dia G.M. Gate Valve
2
-
-
... More
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.
28
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications
8
-
-
... More
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....
10
-
-
... More
such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete
-
-
-
... More
Supplying and fixing in position of best approved quality"PVC.FLOOR" OR " NAHINI TRAP" of 110 mm x75mm. size with necessary stainless steel grating ofapproved quality fixed over a bed of brick jelly concrete1:2:5 (one lime, two sand and five brick jelly) andfinished with Cement Mortar 1:3 (One Cement, Threesand) including dismantling masonry works whereverfound necessary and making good the dismantledportions to the original condition and giving connectionto the CI / PVC pipes, etc., complete
16
-
-
... More
Supplying and fixing in position best quality cuddapah sink of following sizes including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
2
-
-
... More
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specifications.
10
-
-
... More
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
8
-
-
... More
Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification.
8
-
-
... More
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
1
-
-
... More
Supplying, laying and jointing glazed stoneware pipes of following dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with crushed stone sand/ earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications.
10
-
-
... More
Supplying and fixing in position 150mm dia stoneware tee of approved best quality and provding leak proof joints with cement, spun yarn, etc., including dismantling the brick work and re-doing the dismantled portion to the original condition, etc., complete
2
-
-
... More
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete
3
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.
-
-
-
... More
75mm dia PVC pipe
36
-
-
... More
110mm dia PVC pipe
42
-
-
... More
160mm dia PVC pipe
32
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete
-
-
-
... More
a) 75 mm diaPVC plain bend
6
-
-
... More
b) 75 mm dia PVC tee
6
-
-
... More
c) 75 mm dia PVC Y junction
5
-
-
... More
d) 110 mm dia PVC plain bend
6
-
-
... More
e) 110 mm dia PVC tee with single door
2
-
-
... More
f) 110 mm dia PVC plain Elbow
5
-
-
... More
g)110 mm dia PVC plain Tee
7
-
-
... More
h) 110 mm dia PVC tee with double door
2
-
-
... More
i) 110 mm dia PVC door Y Junction
3
-
-
... More
j) 160 mm dia PVC bend
4
-
-
... More
k) 160 mm dia PVC Y with double door
6
-
-
... More
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.
-
-
-
... More
a) 75 mm dia PVC Door cowl
3
-
-
... More
b) 110 mm dia PVC door cowl
5
-
-
... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.
10
-
-
... More
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.
10
-
-
... More
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete
10
-
-
... More
Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
4.1
-
-
... More
Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.
4.1
-
-
... More
Drilling of 6" dia (150mm) vertical bore of hard rock areas to any required depth by first taking a pilot bore of 152mm dia and then enlarging to the required dia by direct or reverse rotary mud circulation method using rotary rigs, fuel labour and drilling bentonite and water required for dirlling at site as directed by the departmental officers rate is inclusive of labour charges for inserting casing pipe assembling the equipment in piont as selected welding the casing pipe if necessary and also tranportation charges for the rig and supporting vehicle from one place to another etc., complete complying with standard specifications.
-
-
-
... More
a) For Bore well Up to 150m below ground level
150
-
-
... More
b) For Bore well Up to 151m Up to 180 m
30
-
-
... More
c) For Bore well Up to 181m Up to 210 m
30
-
-
... More
d) For Bore well Up to 211 m Up to 240 m
30
-
-
... More
e) For Bore well Up to 241 m Up to 270 m
30
-
-
... More
f) For Bore well Up to 271 m Up to 300m
30
-
-
... More
Supplying suitable size casing pipe for 6" dia borewell ( 6kg/sqcm) of best quality with ISI mark with necessary PVC coupling with socket end, The PVC should got approved by the departmental officers before execution.
18
-
-
... More
Supplying suitable PVC End cap ( 6kg/sqcm) of best for casing pipe of 6" dia borewell quality with ISI mark, The PVC should got approved by the departmental officers befoe execution.
1
-
-
... More
Supplying and fixing ISI make submersible pump of 5 HP/ 5.0 Kw model CSM-9 with outer dia 50mm of IS 14220 specification with submersible S/D starter of 8.9 - 13.50 A rekat range with 13.5 A rating and 380-415 V AC coil voltage as per specification. Providing necessary panel board with DOL bush button starter with over load relay three phase preventer indicating lamps ON/OFF switches-1 No automanual selection switch complete as directed etc, complete.
1
-
-
... More
Supplying & Fixing of 1 HP Mono block Motor all accessories etc., complete complying with standard specification
1
-
-
... More
Supplying and fixing wall mounting of Panel board with following accessories a.Suitable DOL type push botton automatic starter for 5HP Bore well compressior
1
-
-
... More
Supplying of best and approved quality of 40 mm UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule-40) etc., complying with standard Specification
-
-
-
... More
40 mm dia
310
-
-
... More
Supply and laying of FRLS PVC insulated 3 core 4 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
310
-
-
... More
Supply and fixing of 20mm dia Nylon Rope for submersible motor of approved quality etc.,complete as directed by the departmental officers
290
-
-
... More
Providing PVC trims ( corner Beeding ) for Wall tiles in all floors etc., complete complying as directed by the departmental officers.
100
-
-
... More
Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three crushed stone sandand Six hard broken stone jelly). Dummy columns should be at least 1 metre height)-Second Floor
8
-
-
... More
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
590
-
-
... More
Stage 1: Spraying antitermite treatment chemical solutions for the foundation before laying the foundation concrete bottom and sides of the foundation
-
-
-
... More
Stage 2: Spraying antitermite chemicals to the grade beam level spraying has to be done for the grade beam, brick masonry in the superstructure in contract with backfill earth.
-
-
-
... More
Stage 3: Spraying antitermite treatment chemical on crushed stone sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the crushed stone sand filling in basement and after leveling the consideration operation is over.
-
-
-
... More
Stage 4: Spraying antitermite chemicals solution alround the building (outside of the building) by making crowbar holes around the building before laying the plinth protection, this holes to be closed after the treatment. For ground floor
-
-
-
... More
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,
12
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST ? EQUIVALENT.
4
-
-
... More
Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST ? EQUIVALENT
6
-
-
... More
Supplying and erecting in position of following 500 liters
capacity Industrial Model Reverse Osmosis Water-cum-
Purifier to deliver Potable Water with World Health
Organisation (WHO) Standards with following
accessories.
(a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport
Valve (with Media Pubble and Fine Sand and
Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents /
Osmonic (USA) - 1 No. and Membrane Pressure
Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.
Low Pressure Switch - 1 No.,
Level Switch - 1 No. &
Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control
System with necessary Stainless Valves and Fittings
and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the
System in position and intact
1
-
-
... More
Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. etc complete complying with standard specification and as directed by the deparmental officers.
-
-
-
... More
Aluminium Dye Cast Letters 9" size
34
-
-
... More
Govt Emblem (15”)
1
-
-
... More
Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete
69.5
-
-
... More
Supplying and fixing in popsition of 100mm dia MS pipe for vertical post including fixing the palte for top and bottom using 5mm thick including one coat of red oxide primer etc.complete
61.5
-
-
... More
GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%