Public Works Department Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Dec 2024
Closing Date23 Dec 2024
Tender Amount₹ 8,67,00,000
Costs
EMD
₹ 4,43,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Providing Ht Panel Room, Fire Fighting , Manifold Medical Gas, Stp And Etp Arrangements...,for The Work Of Construction Of Super Specialty Blocks In Government Medical College Hospital At Thoothukudi In Thoothukudi District
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_509117_1Bid Award Id
ViewTender No
15(1)SE/2024-25 dated.03.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Above 2-3m
168
-
-
... More
Above 3-4m
168
-
-
... More
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
54
-
-
... More
Supplying and filling in foundation, basement, etc with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
23
-
-
... More
Supply and filling in foundation and basement with conveyed earth 3kmmr well rammed, watered and consolidated etc. complete complying with standard specification
50
-
-
... More
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
56
-
-
... More
Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers
31
-
-
... More
Damp proof course with Cement Mortar 1:4 (One Cement and Four Plastering Sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.
31
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
255
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
1489
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
235
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
558
-
-
... More
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
294
-
-
... More
Brick work in Cement Mortar 1:5(One cement and Five crushed stone sand) using best quality Fly ash bricks of size 23x11x7cm including curing etc.,complete complying with standard specification.
-
-
-
... More
In Foundation & Basement
68
-
-
... More
Brick work in Cement Mortar 1:6 (One cement and Six crushed stone sand) using best quality Fly ash bricks of size 23x11x7cm including curing etc.,complete complying with standard specification.
-
-
-
... More
In Foundation & Basement
72
-
-
... More
In Ground floor
81
-
-
... More
In First Floor
48
-
-
... More
In Second Floor
43
-
-
... More
In Third Floor
22
-
-
... More
In Fourth Floor
42
-
-
... More
In Fifth Floor
43
-
-
... More
In Sixth Floor
43
-
-
... More
In Seventh Floor
12
-
-
... More
Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
... More
In Ground floor
49
-
-
... More
In First Floor
79
-
-
... More
In Second Floor
79
-
-
... More
In Third Floor
79
-
-
... More
In Fourth Floor
79
-
-
... More
In Fifth Floor
79
-
-
... More
In Sixth Floor
79
-
-
... More
In Seventh Floor
79
-
-
... More
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
In Foundation Basement
10
-
-
... More
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
In Foundation & Basement
188
-
-
... More
In Ground floor
106
-
-
... More
In First Floor
18
-
-
... More
In Eighth Floor
129
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
553.2
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
15
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
204
-
-
... More
Paving the floor with best approved quality fine polished Kota stone slabs above of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
26
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
841
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
317
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick mixed with bonding agent cebex112, Zydex-zycrete 2x or other Equivalent compound conforming to BIS at 200 ml of one cement bag (50 Kg) for increased workability and air entrainment used finishing all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
3908
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick mixed with bonding agent cebex112, Zydex-zycrete 2x or other Equivalent compound conforming to BIS at 200 ml of one cement bag (50 Kg) for increased workability and air entrainment including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
694
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
10
-
-
... More
Supplying and laying of Interlocking Tamin Paver Block Stone 63mm thk. . Cost of materials laying and Labour charges etc.,
401
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
3760
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
1400
-
-
... More
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
7
-
-
... More
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
... More
110mm PVC Rain Water Pipe
8
-
-
... More
Supplying and erecting pull and push type Rolling Shutters operated with ISI mark of approved size and section using 18gauge G.I Sheet The shutter shall be painted with one coat of red oxide primer and the rate is inlcusive of Hood cover, runners, GI wire, transportation charges etc., complete complying with standard specification.
-
-
-
... More
Gear Operated
8.5
-
-
... More
Manually Operated
6.5
-
-
... More
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos.
-
-
-
... More
one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
-
-
-
... More
Double leaf- fully sheeted (1.5m X 2.1m)
4
-
-
... More
Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window.
-
-
-
... More
suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete
-
-
-
... More
Two Leaves - 1.50x1.30m
21.5
-
-
... More
Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fising as directed by the departmental officers.
6
-
-
... More
Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.
3
-
-
... More
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
141
-
-
... More
Supplying and fixing mild steel iron grill for windows ventilators and grill gate MS ladder etc., including one coat of red oxide primer using M.S. angle of size 40x40x6mm and grill using 20x6mm MS flat and necessary hold fast with M.S. angle of size of 40x40x6mm- 230mm long spliced at end is to be provided appropriate places for fixing the grill etc complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.
1668
-
-
... More
Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers
3.5
-
-
... More
Providing and Filling the tile joint with epoxy grout with following specification:
Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc. complete.
1883
-
-
... More
Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal -Above Ground Level
-
-
-
... More
25mm dia pipe
60
-
-
... More
20mm dia pipe
530
-
-
... More
Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
-
-
-
... More
25mm dia TEE
588
-
-
... More
20mm dia TEE
258
-
-
... More
25mm dia Elbow
188
-
-
... More
20mm dia Elbow
238
-
-
... More
25mm dia Coupling
173
-
-
... More
20mm dia Coupling
203
-
-
... More
25x20 Reducer TEE
243
-
-
... More
25x20 Reducer Elbow
248
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
... More
160mm dia
355
-
-
... More
110mm dia
54
-
-
... More
75mm dia
230
-
-
... More
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
... More
110mm dia PVC Elbow
30
-
-
... More
75mm dia PVC Elbow
212
-
-
... More
110mm dia PVC TEE
200
-
-
... More
75mm dia PVC TEE
295
-
-
... More
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying a) 50 mm thick
41
-
-
... More
Supplying and Fixing of White Porcelin Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe and 32mm dia C.P. waste coupling. etc., complete complying with standard specification and as directed by the departmental officers.
24
-
-
... More
Machineries for STP
Design Fabrication, Supply and erection of bar screen made of MS 10mm square bars to suit the channel. Inner size of channel 1000mm , wide 900mm liquid depth and 1200mm length. The MS 10mm square bars should be properly epoxy coated to avoid the rusting of bars. The spacing between the square bar is 5mm, so that the particles above 5mm will be retained in the entry channel and will be cleared by hand rac manually. The bar screen should be kept at an inclination of 60. The bar screen is fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of MS bars, fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design Supply and erection of Tube Settler feed pump with motor with the capacity of 25m3 /hr as per the design. The type of the pump is submersible sewage disposer Non clog. The pump make is Kirloskar/CRI/Equivalent, The capacity of the motor is 5 HP. The type of the motor is TEFC, IP68, CLSS-B insulation, suitable for 3 phase supply, 440V, 50HZ .Motor make is Kirloskar/CRI/ Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of Coagulant dosing pump with the capacity of 0-50 liters per hour @ 4 kg/cm2, The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 200 liters with HDFE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply and erection of Flocculent dosing pump with the capacity of 0-50 liters per hour @ 4 kg/cm2, The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 200 liters in HDPE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply and erection of air blowers Ring Blower with electrical Motor, 2HP motor . Air blower with motor are provided for one number for operational and one number for standby. The Air blower make is of Raico /cleantek /Equivalent to suit the design requirements. The Air blower with is fixed in a base frame. Necessary foundation bolts, nuts are provided to fix the total coupled assembly of Air blower and motor in the concrete bed. The cost includes the cost of Air blower, base frame , diffusers, foundation bolts, erection charges, transport charges, labour charges., etc., complete.
1
-
-
... More
Design, Fabrication, supply, erection of tube settler media with PVC 1000mm depth 1.1mm thickness 10m3 in hexagonal chevron shaped fixed with 60 degree slope in tube settler tank including the cost of tube settler media, erection charges , transport charges, labour charges.etc., complete
1
-
-
... More
Design Supply and erection of Sand Filter feed pump with motor with the capacity of 25m3 /hr , 20mwc as per the design. The type of the pump is horizontal, Centrifugal, flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 10.0HP. The motor type suitable for 3 phase supply,440v, 50hz . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of Oxidant dosing pump with the capacity of 0-50 liters per hour The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. The cost includes the cost of the pump, foot valves, delivery and suction tubes of standard length, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of Multi graded Sand filter unit with 1600mm dia and 1500 mm HOS. Multi graded Sand filter is a vertical, cylindrical vessel made out of 6mm thick MS Plate with inlet, outlet and back wash provisions. Fully Automated System including backwash The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected thro this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of Multi graded sand filled over & under bed media of pebbles and gravels. The size and height of the filter media is as per the design and standards. Both the top and bottom dish ends & side wall are made out of 6mm MS Plates. The inner side of vessel is painted with epoxy painting, where as the outside with enamel painting . necessary man hole is provided as per the design and drawing. The joints are properly vessel (Multi graded Sand Filter ) is supported by MS legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials like
1
-
-
... More
MS Plates for vertical cylinder and dish ends, inner piping for inlet and header lateral outlet arrangements, man holes, bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges etc., complete.
-
-
-
... More
Design Fabrication, Supply and erection of Bag filter with 25 micron with 25 m3/hour with SS Gadridges The cost includes cost of bag filter, stand , fabrication charges, and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of AOP ( Advanced Oxidation Process) with Ozone Generator includes the ozone recirculation pump in 4m3 /hour @ 35mwc. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 2 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . ozone generator with a capacity of 500 gms / hour with oxygen concentrator Chilling plant 2 TR ( Tonnes of refrigeration) AOP ( Advanced Oxidation Process) Under ground reactor with water proofing coating, floating medias, mixing equipment etc., water ozone mixing equipments with level gauge, safety valve with 2HP motor. The cost includes the AOP ( Advanced Oxidation Process) SS Reactor, ozone generator, oxygen generator, Chilling plant, cooling water feed pump, ozone recirculation pump, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of Activated Carbon filter unit with 1500 mm dia and 2000mm HOS. Activated carbon filter is a vertical, cylindrical vessel made out of 6mm thick MS Plate with inlet, outlet and back wash provisions. Fully Automated System including backwash The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected thro this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of granular activated carbon filled over & under bed media of pebbles and gravels. The size and height of the filter media is as per the design and standards. Both the top and bottom dish ends & side wall are made out of 6mm MS Plates. The inner side of vessel is painted with FRP painting, where as the outside with enamel painting . necessary man hole is provided as per the design and drawing. The joints are properly vessel (Activated carbon filter) is supported by MS legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials like
1
-
-
... More
MS Plates for vertical cylinder and dish ends, inner piping for inlet and header lateral outlet arrangements, man holes, bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges etc., complete.
-
-
-
... More
Design Supply and erection of Back wash pump with motor with the capacity of 25m3 /hr , head of 3m as per the design. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 10.0HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of Treated tank recirculation pump as per the design. The Treated tank recirculation pump is of horizontal, centrifugal, non clog self priming type . He pump make is Kirloskar/Toshio/equivalent to suit the above said flow rate and head. The pump is coupled with motor by flexible coupling drive arrangements. The purpose of the pump is to recirculation for treated tank . The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ,. The capacity of the motor is 2.00 HP. The motor make is Kirloskar/CRI/ Equivalent. The cost includes cost of pump motor, base frame, Motor Guards, foundation bolts, labour charges for erection, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of centrifugal desludger pump with motor with the capacity of 100 m3 , as per the design. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ, 300mm Basket dia. Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, , base frame,, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply, Fabrication and erection of piping for sewage treatment plant of capacity 0.5 MLD. The piping work consists of 1) Suction lines from Equalization tank, delivery lines to Tube settler thro' raw sewage transfer pumps. 2)Pipe lines for Blowers to Equalization tank Both MS and PVC pipes with necessary valves, pressure gauges are used as per the design and suit the flow rate. 3)Pipelines from Clarifier tank Bag filter and Multigraded sand filter 4)Pipe line from multigraded Sand filter to AOP ( Advanced Oxidation Process) reactor and AOP ( Advanced Oxidation Process) reactor to Activated Carbon Filter 5) Pipe line from Backwash pump to Mutigraded filter and Activated Carbon filter 6) Necessary pipe lines , valves, pressure Gauge for filters, flow meters for tube settler feed, Sand filter , Activated Carbon filter, float level switch 7) Necessary Electro magnetic Flow Metre for Inlet and Out let The total piping network as given above, is within the sewage treatment units. The cost includes the cost of pipes (MS, UPVC and 1" dia to 3"dia), Specials, valves, pressure gauges, flow meters, pipe fittings, fabrication charges, labour charges, transportation charges etc, complete.
1
-
-
... More
Design, Fabrication, supply, erection of electrical panel board with necessary starters, main switches, voltmeter, ammeter, and electrical cables of required sizes from pumps to panel board as per design. The size of panel board is approximately 3 feet x 3 1/2 feet, fabricated with MS sheets and powder coat. Necessary provisions are given in the panel board for main switch , starters, switches, voltmeter ammeter as per the design to suit sewage Treatment plant motors. The cables are run from panel board to the all pumps and other electrical accessories such as level switches dosing pumps etc complete,. The cable sizes are as per the design and suitable for electrical motors fixed in the Sewage treatment Plant. No lighting points are considered. The cost includes the cost of panel board, starters, switches, voltmeter, Ammeter, main switch, cables for motors, labour charges etc., complete.
1
-
-
... More
Machineries for ETP
Design fabrication, supply and erection Bar screen 10mm square bars to suit the channel. The SS square bar should be properly epoxy coated to avoid the rusting of bars. The spacing between the square bar is 5mm So, that particulars above 5mm will be retained in the entry channel and will be cleared by hand rac manually. The bar screen should be kept at an inclination of 60⁰. The bar Screen in fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of, Ms bars, Fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design, supply and erection of Neutralization or Precipitation tank for 2 m3 flow per hour with Dosing System for Oxidant dosing and suitable agitator , base frame, foundation bolts, labour charges, erection charges, transport charges precipitation tank etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of on line disinfection for effluent with Ozone in Ground Level Reactor including submersible Mixing arrangement @ the pump make is CNP / Toshio Equivalent, The capacity of the motor is 1 HP. The type of the motor is Self aspirating, non clogging with SS304 impeller , and SS 420 Shaft, suitable for 3 phase supply, 440V, 50HZ including the cost of water ozone mixing equipments with level gauge, safety valve includes the ground level reactor, motor Submersible mixing unit base frame, SS Casing,Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design, Supply of Ozone Generator with Capacity of 50 gm/ hour with oxygen Concentrator, including the cost of Ozone Generator, Oxygen Concentrator and Control Panel etc. Complete
1
-
-
... More
Design, Fabrication, supply, erection of electrical panel board with necessary starters, main switches, voltmeter, ammeter, and electrical cables of required sizes from pumps to panel board as per design, The size of panel board is approximately 2 feet x 2 feet, fabricated with Ms sheets and powder coat. Necessary provisions are given in the panel board for main switch, starters, switches, voltmeter ammeter as per the design to suit Effluent Treatment plant. The cables are run from panel board to the all pumps and other electrical accessories such as level switches dosing pumps Pumps, mixing units etc complete., the cable sizes are as per the design and suitable for electrical motors fixed in the effluent treatment plant. No lighting points are considered. The cost includes the cost of panel board, starters, switches, voltmeter, ammeter, main switch, cables for motors, labour charges etc., complete.
1
-
-
... More
Fire Fighting arrangements Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
35
-
-
... More
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting specialcoupling as per IS 901 as directed by the Departmental Officers. Near every hydrant pointsincluding conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.
60
-
-
... More
Supply and fixing in position of Fire Fighting application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore, Near every hydrant points including conveyance all incidental wherever found necessary etc., complete as per standard specifiction and as directed by the departmental officers.
36
-
-
... More
Supply of Fire fighting Application Application MS Hose Box to keep two number of hoses and 1 no. of branch pipe with nozzie having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
35
-
-
... More
Supply , erection testing and commissioning of Fire Fighting 4 Way Fire Brigade inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT.
3
-
-
... More
Supply, installation of Fire fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20 mm dia ball valve and open and close spray nozzie, warm clip, etc., as per the standard pattern of nay reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doiing the dismantled portions to its original condition wherever found necessary., etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
28
-
-
... More
Supply, erection, testing and commissioning of following MS 'C' Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10kg /sq.cm including necessary fittings like MS flange of table 'E' elbows, reducers, gaskets, bolt, nuts wth washerr & joints as per standard method of arc welding, including one coat of metal primer and two coat of Post Officer Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL/ EQUIVALENT.
-
-
-
... More
200 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
27
-
-
... More
150 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
205
-
-
... More
100 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
360
-
-
... More
80 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
304
-
-
... More
50 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
440
-
-
... More
40 mm dia " c" Class M.S. pipe with ISI mark (make JINDAL or equivalent)
900
-
-
... More
Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers. Using150 dia
350
-
-
... More
Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table „E‟, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
... More
150mm dia
2
-
-
... More
100mm dia
1
-
-
... More
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table 'E' gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT.
-
-
-
... More
200mm dia
2
-
-
... More
150mm dia
8
-
-
... More
100mm dia
15
-
-
... More
80mm dia
4
-
-
... More
65mm dia
2
-
-
... More
Supply, erection, testing and commissioning of Cast iron and Gun metal or stainless steel internal Non return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E' gaskets, bolts & nuts etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
150mm dia
2
-
-
... More
100mm dia
1
-
-
... More
Supply, erection, testing and commissioning of Gun metal Gate Valve of size 50mm dia size including necessary MS flange of table 'E' gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.
25
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR/ EQUIVALENT.
8
-
-
... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motro including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.
6
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14kg. Range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe ling in pump house to read the developing pressure including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT.
6
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head with Electrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent). The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers.
1
-
-
... More
Supply, erection, testing and commissioning Mono Block type Fire fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame incluidng necessary vibration bad mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers (Make: Kirloskar / Equivalent)
2
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required.
A. End suction, top discharge centrifugal pump or cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5kg/ sq.cm at highest and farthest outlet as specified flow of 2280 LPM at 70m head conforming to IS 1520. b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts/24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc., c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc (Make: Kirloskar / Equivalent)
d. Exhaust system having flexible metallic mufier, 100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition .....
1
-
-
... More
e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop selenied for auto stop in the event of fault with audio indications, painted with post office red colour etc., as directed.
f. 12V/ 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common base plate, coupling guard, foundation bolts etc., as directed. g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement.
All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)
-
-
-
... More
Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415 volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings. A.Coomon Panel in Fire Pump House (i) Incomer a. 1 No. 600A TP & N SDFU with HRC fuses
b. 1 set of 600 A, 4 bar aluminium bus bar, 415V, 50 |Hz AC supply c. 1 No. (0-500A) digital ammeter with selector switch & CTs d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses. (ii) Outgoing a. Main Fire Pump
400 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection , digital ammeter with built- in selector switch and suitable
1
-
-
... More
CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operaton, selector switch for auto/ manual / OFF operation - 1 No......b. Jockey Pump 125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter/ delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic opertion, selector switch for auto / manual operation - 1 No. c. Diesel Engine Control comprising of :
1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode.
2. Indication lamp for high/ low lubircant oil pressure, high water termperature and engine ON indication. 3. Battery charger suitable for 12V/ 24 V DC with boost and tickle selector switch, 0-15V/0-30V DC volt meter, 0-20A DC ammeter
4. All standard relays and accessories for automatic operation of diesel engine.
5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specifiction and as directed by the Departmental Officers.
-
-
-
... More
Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specifcation and as directed by the Departmental Officers.
2
-
-
... More
Supply and Laying of following sizes of armoured aluminium/ Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition
-
-
-
... More
3 Core 10 Sq.mm armoured Copper Cable
20
-
-
... More
4 Core 16 Sq.mm armoured Aluminium Cable
25
-
-
... More
10 Core 2.5 Sq.mm armoured Aluminium Cable
20
-
-
... More
2 Core 2.5 Sq.mm armoured Aluminium Cable
25
-
-
... More
Supply and Providing 1000 litres capacity of PVC water tank. Make: SINTEX / EQUIVALENT.
1
-
-
... More
Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers.
1
-
-
... More
Supply, Installation, testing and commissioning of Micro Processor based Conventional 12 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230/24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
2
-
-
... More
Supply, Installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS junction box / false ceiling using fixing accessories llike screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers, (Make: Apollo / Equivalent)
606
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers, (Make: Ravel / Equivalent)
50
-
-
... More
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers, (Make: Ravel / Equivalent)
48
-
-
... More
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
8000
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST / EQUIVALENT.
70
-
-
... More
Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT.
8
-
-
... More
Supply and kept in position of 9 litres capacity Fire Fighting standard Buckets of 4 Nos. with Bucket Stand as per specifications and as directed by the Departmental Officers
10
-
-
... More
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI coller for each sprinkler bulb, mounted in MS pipe ling using suitable size MS threaded coupling, thread, shellac etc., as per standard mehtods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
-
-
-
... More
Pendent sprinkler
650
-
-
... More
Upright sprinkler
389
-
-
... More
Horizontal side wall Sprinkler
200
-
-
... More
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
... More
100mm dia
350
-
-
... More
80mm dia
350
-
-
... More
50mm dia
350
-
-
... More
40mm dia
350
-
-
... More
Providing and fixing Drain Valve 25mm dia, test valve andsight glass asper IS Standards. Make: Kartar
34
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet)
15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. Make: HD Fire/Tyco/Newage
200
-
-
... More
Providing and laying 25mm dia M.S. 16 gauge conduit pipes and fittings for fire alarm system, including necessary all accessories etc. complete. Make: BEC, Steelkraft or Equivalent
350
-
-
... More
Supplying and Laying of PVC (RIGID) pipes 1.8mm Thick withISI mark for smoke deductors during the time of Preconcreting in the Slabs. Make: Polycab, Finolex, Universal, Nelco, VIP, Avon Plast or Equivalent PVC Rigid pipe 20mm (3/4")
350
-
-
... More
Supply and kept in position of Trolley Mounted Water CO2 Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS: 13385, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELENT/SAFETY FIRST / EQUIVALENT.
12
-
-
... More
Medical Gas Arragements Design,supply&fixing of Gas outlet points:(Self Sealing type-Single/Dinoutlet type) with S type bracket made up of copper and the out let of non-interchangeable for other gas.The outlet points are brazed with brass bracket with self sealing valve(stainless steel) with all accessories and complete set and are converted by plastic cover duly colour coated as per specific gas and button cover etc.,complete as directed by the departmental officers and as per IS Code 12827/1989 & ISO 7396/1987 specification.
990
-
-
... More
Supply and installation of Medical gas copper pipe line arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsencial phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (Tee,Elbow,Reducer,Coupling).The copper pipe lines should be tested suitable for a steam of working pressure of 17.34kg./cm2(17 bar) and confirm to BS 864 standard with specially made for brazed socket type connection.The medical gas copper pipeline should be tested as per standard and commissioning after painting as per international code no IS 2379/1963 Table-V.The pipe lines installed at the various wings and floors etc.,complete as directed by the departmental officers as per IS code 12827/1989&ISO 7396/1987 specification.
-
-
-
... More
54mm dia copper pipe ODx1.2mm thick
221
-
-
... More
42mm dia copper pipe ODx1.2mm thick
910
-
-
... More
28mm dia copper pipe ODx0.9mm thick
1725
-
-
... More
22mm dia copper pipe ODx0.9mm thick
1232
-
-
... More
15mm dia copper pipe ODx0.9mm thick
5835
-
-
... More
10mm dia copper pipe ODx0.9mm thick
1324
-
-
... More
Brass Isolation valve. suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball value of RB or Italy or reputed make,connected in line with medical gas pipe line system by using suitable size brass valve adopter union,ferrule,nipple,rubber "O" ring,taption lap and etc.All pipe line regulators shall be capable of controlling pipee line pressure and must compatible with the requirements specified in IS 12827-1989.All valves should be pneumatically tested for twice the working pressure for the gas line as per IS code 12827/1989&ISO 7396/1987 specification.
-
-
-
... More
42mm dia ball valve
10
-
-
... More
28mm dia ball valve
30
-
-
... More
22mm dia ball valve
20
-
-
... More
15mm dia ball valve
270
-
-
... More
Oxygen Manifold arrangement of 2 banks x 12 cylinder each wing with semi automatic control panel which includes contact gauge 2 No., oulet pressure gauge, brass heavy dut IO x regulator 2 Nos., with suitable adopter, flexible SS Hose. Manifold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 12827-1989. Emergency alarms with illuminating display for low/ high pipeline pressure and malfunctioning of system.
1) Manifold top frame with provision for connecting 12 cylinders on right bank and 12 cylinder on left bank with high pressure interconnecting tubing, silver brazing, non return for claping 2 x 12 cylinders and related fastener. The O2 manifold should with stand a pressure of 140kg. / CM2 The installation is commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 /1989 & ISO 7396/1987 Specification .
1
-
-
... More
Nitrous Oxide Manifold Arrangements of 2 banks 3 Cylinder each wing, with automatic control panel which includes contact gauge 2 Nos. outlet pressure gauge, brass heavy duty IOX regulator 2 Nos. with suitable adopter, flexible SS hose. Manifold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 12827 -1989. Emergency alarams with illuminating display for low / high pipe line pressure and malfunctioning of system. 1) 2 x3 cyliner Nitrus Oxide Manifold should be suitable with stand a pressure of 140kg/ Cm2 and above along with high pressure copper annealed tail pipes with end brass adapter suitable for Nitrous Oxide Cyliners and manifold.
2) Top frames comprising of high pressure copper pipe of size 12mm ID 1.5mm wall thick with high pressure brass fittings made of high tensile brass and connetions through non -return valves, high pressure copper tail pipes made of high pressure copper pipe size of 7mm ID 1.5mm thick. 3) The disign of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely with fitted heavy duty regualtor. The Manifold should be tested at 3500 pig as per IS 12827/1989 & ISO 7396 / 1987 Specification.
1
-
-
... More
Flow Meter made up of Brass with Humidifier Bottle Flow Meter should be back pressure compressed and should be accurate gas flow measurement with control range 0-13 litres per miniute. It should meet strict permission and dumbling standard. The meter body should be made of brass materials. The humidifier bottle should be made of unbreadkable polycorbonate material and auto cleavable at 134 degree centigrate. The includes flow meter and its accessories (silicon tube with mask.) The cost of materials including transport, etc., complete as per standard specification and as directed by the Dpartmental Officer and as per IS 12827/1987 & ISO 7396/1987
120
-
-
... More
Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket for mounting it on the wall. The collection jar should be made of unbreadkable polycarbonate materials which is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officer and as per IS 12827/1989 & ISO 7396/1987 Specification . The rate includes cost of silicon hose with SS nipple on either side.
120
-
-
... More
Supply, installation, testing and commissioning of equivalent to Ingersoll Rand Reciprocating Air Cooled Type
(10 HP) Rating Vaccum Pump as per following provisions.
As per IS 12827 / 1987 & ISO 7396 / 1987 Specification
a) Vaccum Pump - 10 HP - 1 No.
b) Electric Motor - 10 HP - 1 No.
c) DOL Starter with OLR - 1 No.
d) Vaccum Switch - 1 No.
e) Vaccum Gauge - 1 No.
f) Control Frame with Fittings - 1 No.
g) Suction Scrubber - 1 No.
h) V-Belts - 1 No.
i) GI & MS Fittings - 1 No.
j) Brass Fittings - 1 No.
k) Exhaust Silencer - 1 No.
i) Base Frame for Motor and Vaccum Pump - 1 set
m) Pilot Line with Fittings - 1 set,
Vaccum Room & Air Compressor Room Inside
2
-
-
... More
Supply, installation, testing and commissioning of
Compressed Air System of Reciprocating Oil Free Air
Compressor Belt Driven Type 10 HP Air Compressor with
following provisions.
As per IS 12827 / 1987 & ISO 7396 / 1987 Specification
Compressor package consists of following:
a) 10 HP Air Compressor - 1 No.
b) Electric Motor 10 HP - 1 No.
c) Dol Starter - L&T - 10 HP - 1 No.
d) Base Frame Kit (for Motor and Compressor) - 1 set
e) Pressure Swith - 1 No.
f) Pressure Gauge - 1 No.
g) NRV and Pilot Fittings - 1 No.
h) Delivery Tube - 1 No
i) Foundation Bolts & Anchor Fasteners - 1 Lot
j) Belt Guard - 1 No.
k) Refrigerator Type Air Dryer-40 cfm. capacity-1 No.
l) Drain Ball Valve - 1 No.
m) Air Outlet Ball Valve - 1 No.
2
-
-
... More
Vacuum Room & Air Compressor Room Inside Accessories:
Non-Return Valves, Air Pressure Switch, Pressure Gauge,
Isolation Valves, Air Filters etc.,
Inter connecting piping: Mild Steel Pipe of 2” with fittings.
-
-
-
... More
Supply, installation, testing and commissioning of MS fabricated Vertical Mounted Type 1000 liters capacity Vaccum Receiver with inlet and outlet and drain holes provided suitable to operate with vaccum pump etc as directed by the Departmental Officers.
2
-
-
... More
Supply, installation, testing and commissioning of MS fabricated Vertical Mounted Type 1000 liters capacity Compressed Air Receiver with inlet and outlet and drain holes provided suitable to operate with vaccum pump etc as directed by the Departmental Officers.
2
-
-
... More
Bed Head Panel of size 1m, length, height 0-0.30cm and depth of 4". The aluminium powder coated with requirement colour for provisioin points of o2-2 No. Air 1 No. Vaccum 1 No. with double electrical socket with switch 2 Nos. with 2 set with IV - bottle holder fixing to the wall hanging including monitor stand etc., complete.Pressure Gauge, Isolation Valves, Air Filters etc., Inter connecting piping: Mild Steel Pipe of 2" with fittings.
95
-
-
... More
Theatre Vaccum Unit: The unit should comprise of two reusable 2000ml shatter resistant bottle. Each made up of ply carbonate material and fully autoclavable at 134 degree centigrade, should have a vaccum regulator with instant ON/OFF switch and three way left, right or both. All the above itesm should be mounted on atrolleyy having free moving castor wheels. (As per IS12827/1989 & ISO 7396/1987)
10
-
-
... More
Supplying and Fixing of Aluminium Dye Cast English Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes.
-
-
-
... More
37cm (15”)
23
-
-
... More
25cm (10”)
11
-
-
... More
Supplying and Fixing of Aluminium Dye Cast Tamil Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes.
-
-
-
... More
30cm (12”)
15
-
-
... More
25cm(10")
6
-
-
... More
Supplying and fixing of Brass Emblem arrangements
1
-
-
... More
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of
6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
444
-
-
... More
Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875.
Paint Specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.
Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.........Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement.
73
-
-
... More
Polyurethane brackets should be used to connect horizontal section to vertical sections.
Silicone: Natural cure, with good UV resistance to be used.
The above frame should be fixed to brick / concrete masonry by using nylon self-expanding cap and driving MS electro plated 80mm long screws into the caps through frames.
Glass: 5mm reflective Saint Gobain OR equivalent.
-
-
-
... More
Providing and finishing the portico ( 7.80 X 3.90 ) columns and finishing the portico arches with ornamental Sthapathi elevation works and by proper shape including material and labour charges etc., complete as directed by the departmental officers
1
-
-
... More
Providing and finishing the portico (10.66 X 5.40 )columns and finishing the portico arches with ornamental Sthapathi elevation works and by proper shape including material and labour charges etc., complete as directed by the departmental officers
1
-
-
... More
Painting the wall with Texture Finish Paint including labour charges etc complete.
1880
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
3
-
-
... More
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Enginer before use on works)
7
-
-
... More
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
14
-
-
... More
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (For Grading III Material)
258
-
-
... More
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base /Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material ,labourcharges, rentals for machinery,fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
343
-
-
... More
Providing and laying Prime Coat over WBM/WMM surface using 7Kg of Emulsion Bitumen (SS1) per10sqm for preparatory to another bituminous construction over it, including cost of material ,labour charges, rentals for machinery ,fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5
1275
-
-
... More
Providing and laying Tack Coat over WBM/WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion (RS1) per10sqm for preparatory to another bituminous construction over it including cost of material ,labour charges,rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5
1275
-
-
... More
Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cum of 19.00 - 9.50 mm,0.17cum of 9.50 - 2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG 30 bitumen for premixing per 10 sqm ncluding cost and conveyance of all materials to CMP site, heating the bitumen and aggregatetor required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8 - 10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler,tipper trucks,Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP clause 507 of MORTH Rev- 5.
50
-
-
... More
Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.
18
-
-
... More
Manufacturing, supplying and fixing of Teakwood Ornamental Entrance Main Door of required size with the following specification. The outer frame of ornamental Entrance door of size 200 x 150mm Teak wood scantling. The door consists of open able area with double leaf. The door frame 250x200mm with corner designed beading works. The door is of 50mm thick. The outer frames corners are designed border works single side for entrance outer frame. The cost includes all kinds of furniture fittings such as Brass Aldrop, Brass tower bolt, brass hinges, brass door stopper, brass handles. All the members are finished with two coats of melamine polish with outer priming coat. (The quality of all furniture fittings should be got approved by the Executive Engineer before use)
46.6
-
-
... More
Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
164
-
-
... More
Supplying and erecting in position of following 1000 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA) - 1 No. and Membrane PressureVessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.Low Pressure Switch - 1 No.,Level Switch - 1 No. &Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel ControlSystem with necessary Stainless Valves and Fittingsand Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the
System in position and intact
4
-
-
... More
GST
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements