Public Works Department Tender

Supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of single box type fitting with TW round block on wall or ceiling with 20W LED Tube Light for T8 Fitting (Single Side) with PVC unsheathed copper leads from terminals to the fitting. Higher end

Supply and fixing of single box type with 4'20 W crystal glass LED tube light fitting with TW round blocks on 0.75 mtr conduit pipe Suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with LED tube.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25 A DP MCB complete set for ACPlug in flush with wall with earth connection. (For AC Plug)

Supply and fixing of 32A DP MCB in flush with sheet enclosure in wall with connection. ( For Steet light and UPS In and out )

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 125 A 4P MCCB switch as incoming and 4 nos. 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End

Supply and fixing of 125A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size 1-1/2"x1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x 1-1/2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 100A fuse units(500V), 1No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earthwire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm. copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq.mm. copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and clamping of 3-1/2 x 70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Earthing as per the ISI specification with an earth electrode of 2.10metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125 mm x 50 mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and fixing of IP 1920x1080p 4MP Security Bullet Camera and connection with CAT 6 cable (Make:HIKVISION/equivalent )

Supply and fixing of 32 Channel - 2 SATA (2 Nos. Hard Disk) Network Video Recorder for CCTV Camera and connection with CAT 6 cable .

Supply and fixing of 8 PoE SWITCHES FOR CCTV IP CAMERA (Make:HIKVISION/equ )

Supply and fixing of unarmoured Cat 6 Cable with Concealed PVC Pipe.

Supply and fixing Television 80 cm (32 Inches) Smart LED TV for CCTV camera Make: LG /equivalent

Supply and fixing of 4U Rack with accessories.

Supply and fixing of 3 KVA 1 PHASE UPS (Single Phase In & Single Phase Out) SYSTEM WITH BATTERY 42 AH -8 Nos and 1 HOUR BACKUP

Design, Engineering, Supply, Fabrication, Erection, Testing, Commissioning and Handing over of 1 No. 8 persons 544 kgs. Capacity Passenger Lift as per the following specifications 1. Location : District Library Building at Tirupathur 2. No. of Lift : one No 3. Type of Lift : Passenger Lift with machine room - Gearless model 4. Capacity of Lift : 10 Persons / 544kgs 5. Speed : 1.0 mtr / sec 6. Type of Drive : V3F Drive with enhanced ride comfort and near Zero Level Functions. 7. No. of Floors : 3 (Three) (Ground Floor + 1Floors +2 Floor) 8. Total Travel : 10800mm/ Pit 1600mm / Head room 4000mm 9. Leveling accuracy : High level accuracy with smooth and jerk free stopping. 10 Construction of : 18 SWG High Quality Car. S.S. Car and Hand rail, PVC flooring and Perspex False Ceiling. 11 Position of Machinery : Directly above the Lift well – Gearless without machine room. 12 No. of Landings : 3 nos in the front side. 13 No. of Car Entrance : One in the front side. 14 Car Entrance : Power operated V3F Drive, Centre opening Sliding Stainless Steel (1.5mm) Hairline finish door. 15 Landing Entrance door : Centre opening Sliding Stainless Steel (1.5mm) hairline finish door with provision for Emergency Exit key at All landings.

16 Lift well : 2600mm (Wide) x 1400mm (Depth) as per IS 14655(Part 1) 2000. Lift shaft available. 17 Lift Pit : 1600mm (available) Depth. 18 Car Size : 1300 x 1100 x 2300 (mm Wide x mm Depth x mm Height) as per IS 14665 (Part I) 2000 19 Car Clear Opening of Gates / Doors / Lintel : 800mm Wide x 2000mm Height and Lintel : 2300mm as per IS 14665 (Part I) 2000 20 Power Supply : 400/415V 3phase 50Hz AC Power Supply. 21 Type of Control System : Micro Processor based Simplex Selective Collective control with / without attendant. 22 Car fittings : LED lights & Regular (Square) cabin fan. 23 Lift Well : Available 24 Indication : UP / DOWN Digital direction and position indicator for all Landings and inside the car. 25 Emergency provisions : Battery operated Alarm bell & Light to be Provided with Automatic charging device. 26 Fire Man’s switch : In the Ground Floor 27 Minor Builder works : included 28 Scaffoldings : included 29 Sill angles and Facio Plates : included 30 Steel for Lift Machinery : included 31 Servicing and maintenance : Free Comprehensive Maintenance for one Year Guarantee period. 32 Automatic Rescue Device : Provision to facilitate the landing to the nearest floor at the time of power failure. The ARD consists of suitable Battery system with charger, Inverter, under voltage protection system etc. complete with all accessories.

33 Provision for Intercom : To be provided in the Ground Floor & Machine Room with Phone (Press & Speak). 34 Lift License : Preparation of Drawings, payment of inspection charges to CEIG and insurance policy and Obtaining CEIG approval for the Lift as per Lift act should be done by the Lift contractor. 35 Floor Position : Included with LED display and floor annunciator. 36 Special Features: a. Infra red door sensor with full height screen b. Full width half height rear panel mirror c. S.S. hair finish hand rail in car d. Stainless steel signal features e. Vandal proof SS button with SS cover f. S.S. hair finish door frames for landing doors g. V3F door operator h. Call register signal i. Stainless steel facio plates for car operating panel and landing fixtures j. Steel ladder for Lift machine room k. On / Off switch for fan and light l. Over-load warning indicator with audio Announcer m. Voltage stabilizer for control circuit.

37 Over Speed Governor, Phase failure and Phase reversal Relay, alarm bell, T guide brackets for car and counterweight, Rubber padding under the winding unit, Motor of adequate capacity, signal reduction worm gear, Electromagnetic brake with compression springs, Car safety gears, Buffers, Electro mechanical locks, Emergency key, side supporting angles, Motor over - load protection devices, Final limit switch main, suspension ropes, Counter weights, Lifting joist for mounting the Machineries. 38. Guarantee : Guarantee at least for one year for the materials and workmanship of equipments should be offered by the Lift contractor. 39. Site testing in accordance with IS 14665 should be carried out at the time of Handing over to the User department. 40. Supply, operation and maintenance manual and necessary tools for operation and a set of spare parts required for one year to be provided. (As per SR Rate) (Johnson/Kone/OTIS)

GST @ 18%