Public Works Department Tender

Supply and erection of M.S. Stepped tubular pole of 8 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 114.30mm OD x 5.40mm Thick x 4500mm Length, 88.90mm OD x 4.85mm Thick x 1500mm Length, 76.10mm OD x 3.25mm Thick x 1500mm Length with single arm ornamental bracket of outer dia 50 mm pipe bent suitably to give a height of 1.5 mtr and overhang welded suitably with ornamental bracket and fixed rigidly with 8 Nos of bolt and nuts to prevent any turning movement of bracket due to wind with sheet moulded compound (SMC) junction box IP 42 protection of size (295mm x 225 mm x 120mm) , fire proof of suitable size with 4 way terminal block with hylem sheet of size (250mm x 200mm x 6mm) with 1 No. 16 A DP MCB provided at a height of 2.0 mtr from the ground level with embossing of metalic "DANGER 440 V" with earth connection with earth bolts of size 8mmx25mm welded on the pole at one end with 2 mtr of 40 mm GI pipe for incoming and outgoing cable.The pole shall be provided for coil earth with No. 8 SWG GI wire of 11.5 mtr of length in which 10 mtrs of total length compressed in to a coil of one meter length. The pole shall be painted with one coat of red oxide primer paint and two coats of aluminium paint of reputed make to the length of pole with supply and fixing of 1 No. 100W LED Street Light Fitting with LED suitable for pole dia 63 mm (max)/ equivalent to be approved by PWD officials with necessary connection wire from junction box to the fittings with 3 x 2.5 sq. mm. (28/0.3 mm) PVC copper wire for each fitting with pole earthing with necessary connections testing and commissioning as per the specification. The MS tubular pole is to be embeded in the bridge with suitable clamping and MS cover plate. The pole should be mounted and the side wall of the bridge with suitable clamping arrangements.

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply, erection and commissioning and testing of outdoor type pillar box 5 feet x 4 feet x 18" with angle iron support and with double door made up of 16 gauge MS sheet with lock and key arrangements finished with anti corrosive treatment and painting with view glass arrangements for meter and indication lamp with weather proof ventilation arrangements mounted on suitable concrete pedestal with cable entry holes to accommodate the following control gears, cubical type panel with two coats of enamal paint in sheet heavy gauge complete with two coats of enamel paint with two independent compartments for EB metering arrangements with sealing provision to accommodate EB meter, 4 way vertical type TP MCB DB timer etc.,