Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 Apr 2024
Closing Date23 Apr 2024
Tender Amount₹ 17,35,40,000
Costs
EMD
₹ 8,77,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_450172_2Bid Award Id
ViewTender No
25/2023-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Refilling with excavated earth other than Sand with an initial head load and lift Charges and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
320
-
-
... More
Supplying and filling in foundation, basement, with Conveyed earth with a lead of 0-5KMMR in Layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
541
-
-
... More
Supplying and filling in foundation, basement, etc with stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
182
-
-
... More
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand(M-Sand) and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
120
-
-
... More
Brick work in Cement Mortar1:5 ( one Cement and five crushed stone sand(M-Sand))using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including pointing with same mortar levelling and curing, etc., complete complying with standard specification.
-
-
-
... More
In Foundation & Basement
297
-
-
... More
Brick work in Cement Mortar1:6 ( one Cement and six crushed stone sand(M-Sand))using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including pointing with same mortar levelling and curing, etc., complete complying with standard specification.
-
-
-
... More
In Ground Floor
266
-
-
... More
In First Floor
217
-
-
... More
In Second Floor
206
-
-
... More
In Third Floor
218
-
-
... More
In Fourth Floor
70
-
-
... More
Brick work in Cement Mortar1:3 ( one Cement and Three crushed stone sand(M-Sand))using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including pointing with same mortar levelling and curing, etc., complete complying with standard specification.
-
-
-
... More
In Foundation & Basement
80
-
-
... More
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
897
-
-
... More
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
... More
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
6302
-
-
... More
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
2714
-
-
... More
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
243
-
-
... More
Centering for curved surfaces of all RCC items of work
122
-
-
... More
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone sand jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone sand jelly and with about (4.79 cu'm') 7670 kg. of M-Sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
... More
Foundation & Basement
556
-
-
... More
In Ground Floor
283
-
-
... More
In First Floor
267
-
-
... More
In Second Floor
249
-
-
... More
In Third Floor
245
-
-
... More
In Fourth Floor
75
-
-
... More
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
2582
-
-
... More
Brick partition walls of 10.80cm thick using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three crushed stone sand(M-Sand)) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
... More
In Ground Floor
178
-
-
... More
In First Floor
160
-
-
... More
In Second Floor
194
-
-
... More
In Third Floor
181
-
-
... More
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand(M-Sand) and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for Flooring including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
58
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand(M-Sand) and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
-
-
-
... More
For Foundation & Basement
4
-
-
... More
Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand M-sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
-
-
-
... More
40mm thick
152
-
-
... More
Providing Vinyl Flooring 3.00mm anti static seamless PVC flooring thick.The Floor shall be smooth, non-slip, impervious material conductive enough to dissipate static electricity but not conductive enough to endanger personnel from electric shock It shall be Electro Static Discharge (ESD) combat PVC seamless flooring of very high quality thickness not less than 2.00mm. Continuous roll shall be used and with minimum joints. The Joints to be welded by special PV thermal units using PVC welding bars of same colors.The sheet shall be highly durable to shock and indentation. IThe flooring shall be done by skilled workers of the accredited agencies, autlioi‘ized by the supplier of PVC sheets. The Electrical resistance (Point to ground) shall be within 2.5 X 104 to 5 X 106 Ohms. The floor shall not allow build up of Electrical charges beyond 100V due to antistatic effect. The corners shall not be terminated sharply & concealed coving shall be used to overlap the wall panel to a height of approx. 25mm & sealed perfectly & uniformly. Self leveling compounds shall be used . The copper strips to be made visible by grinding and no copper strips shall project more than 0.5mm above level surface to avoid damage to the PVC sheet. One earthing lead shall be brought out from every 150 square feet area and attaching it to the main earthing strip/ Ground.Copper grounding strips (0.05mm Thick, 50 mm width) shall be laid flat on the floor in the conductive adhesive and connected to copper strip of grounding. The connection from copper grid shall be brought out uniformly at places to form equi-potential grid.The flooring shall be mechanically shock proof, scratch proof, flame retardant and anti antibacterial.The floor shall efficiently discharge Electric charges up to 2KV. The Floor shall offer Electrical Resistance.The Final Surface shrill be non-corrosive to biological fluids & detergents, shall be fire retardant & anti-microbial, color shall be uniform, pleasant & matching with ambience etc., Complete complying with standard specifications.
216
-
-
... More
Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand crushed stone sand(M-Sand)) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
2110
-
-
... More
Paving the floor with Cement based Hydraulically pressed Anti skid tiles (pattern design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand (M-sand)) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
95
-
-
... More
Paving the floor with best quality Industrial Vitrified Tiles of size 600 x 600 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand (M-sand)) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
351
-
-
... More
Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone sand(M-Sand)) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
251
-
-
... More
Provided Jet Black in colour granite slab 4'x2" 18-20mm thick for working table
50
-
-
... More
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet black and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand(M-Sand)) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.
940
-
-
... More
Providing Single Nosing for Granite Slab
310
-
-
... More
Dadooing walls with colour designed digital printed ceramic tiles of size 300mm x 450mm x 8mm best approved quality tiles set in Cement Mortar 1:2 (One Cement and Two crushed stone sand(M-Sand)) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
3433
-
-
... More
Dadooing the vertical wall surface with pre polished granite slabs or approved colour 18 to 20 mm thick of best quality free from all defects set in cement mortar 1:2 (one cement and two crushed stone sand M sand) sand) 10mm thick. The joint shall flush with face or granite slab and in line. The joints shall be pointed with sand color pigments mixed with white cement of 1.8 kg/sq.m. The slabs so laid shall be supported with suitable arrangements for a period of 2 hours after laying to avoid falling granite slabs by its self weight after laying its position. The granite slab shall be got approved by the departmental officers before use on works etc complete. The rate is including labour, all material, scaffolding charges, hire charges for granite cutting machine, power consumption etc complete
195
-
-
... More
Providing Wall Panelling using Stainless Steel Panels with following specification. The frame using aluminium tubular section fixing horizontally and vertically in position with wall at required interval in both diretions, fixing Stainless Steel Panels over the aluminium frame work with necessary screws & clips. The total Panel thickness between 50-60mm. It shall be 0.80mm thick,304 grade stainless steel sandwich panel(both side 0.8mm thick sheet) with core consisting of rigid polyurithane foam injected under high pressure with minimum density of 40kg/m3. The make of stainless steel sheet shall be Tata/Jindal/Sail .The rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. S.O.R 2023-2024 P-72 Item No:M 0690
310
-
-
... More
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand (M-Sand) to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
117
-
-
... More
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three crushed stone sand (M-Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
1196
-
-
... More
Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct by the departmental officers.
-
-
-
... More
20/30mm thick
160
-
-
... More
Providing cupboard Shutters using termited water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutters and 1mm thick fixed in the outside of the shutters using fevicol along with necessary furniture fittings, such as hydraulic hinges, tower bolts, handles, multi purpose locks etc., as directed by the departmental officers.The design pattern, water proof plywood, laminate sheet and other materials should be got approved from Executive Engineer before use on works. PWD S.O.R P- 48 Item No- M- 0390
240
-
-
... More
Supplying and fixing in position best approved BIS quality of PVC rain water down fall pipes having a working pressure of 4 Kg./sq.cm of following dia. including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc. and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc. complete. The rate shall be inclusive of cost of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of clamps. Special type of "U" clamp at the centre of the pipe line shall be fixed in addition to those for more than 3.0 metre pipe length etc., complete complying with standard specification.
-
-
-
... More
160mm dia
224
-
-
... More
110mm dia
9
-
-
... More
Plastering with Cement Mortar 1:5 (One cement and Five Plastering crushed stone sand (P-sand)), 12mm thick mixed with bonding agent cebex 112, zydex - zycrete 2x or other equivalent compound confirming to BIS at 200ml of 1 cement bag 50 kg for increased workability and air entraintment used finished in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
8963
-
-
... More
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering crushed stone sand (P-sand)) 10mm thick mixed with bonding agent cebex 112, zydex - zycrete 2X or equivalent compound confirming to BIS at 200ml of 1 cement bag 50 kg for increased workability and air entraintment used finishedand curing, etc., in all floors complying with standard specification and as directed by the departmental officers
7815
-
-
... More
Plastering with Cement Mortar 1:3 (One Cement and Three crushed stone sand(P-Sand)) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
765
-
-
... More
White washing three coat with freshly burnt white shell lime in all floors including cost of lime, blue powder, fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.
5080
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Plastic interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
4079
-
-
... More
Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
6761
-
-
... More
Painting new iron work with two coats of best first quality synthetic enamel paint of approved colour over the existing red-oxide primer coat in all floors excluding cost of priming coat etc. complete complying with standard specification. (The brand, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
591
-
-
... More
Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. Solid panel PVC door with frame
113
-
-
... More
Supplying and fixing of solid PVC sliding door with roller
3
-
-
... More
Supplying ,fabricating and fixing in position of Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1 mm thick) of size 100 mm x 60 mm with a rebate of 30 / 35 mm x 15 mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc.ready to assemble condition for easy installation at site including dismantling,making necessary chipping and holes in RCC columns, walls with power drills to the extent required ,including providing concrete 1:2:4 inside the box curing etc complete.The cost includes the cost of hold fast ,plastic bush, insert receiver,rubber bottom,shock absorber etc complete as directed by the departmental officers in all floors
326
-
-
... More
Supplying and fixing Solid core Particle board flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200 x 12 mm aluminium tower bolt 2 nos. 150x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos.200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers. Single Leaf
70
-
-
... More
Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers. Double Leaf
66
-
-
... More
Manufacturing Supplying and fixing in position of Modular Operation theatre door of size 1.50x2.10m. The Door Frame shall be Box Section using Stainless Steel Plate of 1.20mm thick of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame. The door panel shall be made of 0.80mm thick Stainless Steel of 304 grade and packed with paper craft honey comb Polyurithane. Glass arrangement shall be fixed in position for vision. Necessary fittings such as Door closure, D type handles, ball bearing butt hinges and concealed automatic door bottom seal shall be fixed. The rate includes transportation,labour charges, drilling the wall wherever necessary with power drills to the extent required and make the damaged portion to good condition after fixing as directed by the departmental officers. The door should be got approved from the Executive Engineer before use on work
23
-
-
... More
Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.B3538and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.
-
-
-
... More
Single Leaf
27
-
-
... More
Manufacturing, supplying and fixing of steel doors with following specification. MS Angle of size 40x40x6mm at 3.5 Kg/m used for outer frame and MS Angle f size 35 x 35 x 5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided at required intervals in the Shutter frame and welded intact on both ends to the shutter frame. 18GCR Sheets of best quality is laid as panel in the shutter frames.18x5mm at 0.70 Kg/m MS Flat is welded over the 32x6mm @ 1.50 Kg/m MS Flat on the rear side of the door, crushed stone sand(M-Sand) witching the CR sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS Flats are provided diagonally on the rear side of the shutter. 3 Nos. of hinges in case of single leaf and 6 Nos. of hinges in case of double leaf shutters is provided. 6 Nos. of hold fasts 200mm length spliced at the ends are welded to the outer frame of the door. Tower
-
-
-
... More
bolt 2 Nos., one at the top and the other at bottom are provided. One aldrop is provided in case of double leaf door at lock rail section in the door. In single leaf doors, one more aldrop is provided in the inner side of the lock rail section of the door, one rotating locking arrangementslocking arrangements for inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place in case of a double leaf door. MS Flat 32x3mm at 1.10 Kg/m is provided on the edge of the one shutter to conceal the gap between the two shutters. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete.
-
-
-
... More
Single Leaf
9
-
-
... More
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., (a) Manually operated
19.3
-
-
... More
Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.
205
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
275
-
-
... More
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black Colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
32.5
-
-
... More
Manufacturing, supplying and fixing in position of Steel Sheeted windows with the following specifications. Outer frames of windows made of ‘Z’ section F7D of size 33 x 25 x 3mm at 1.419 Kg/m and mullion ‘J’ Section (F4B) of size 46 x 25 x 3mm at 2.28 Kg/m and shutter section of made of F7D of 33 x 25 x 3 mm at 1.419 Kg/m as specified in IS 7452 / 1990.Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS Flat at 0.70 Kg/m at 3 Nos. for each shutter and additional diagonal stiffeners of the same MS Flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in positional firmly.
-
-
-
... More
2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18 x 5mm MS Flats are revetted to the shutters at an appropriate height in window. Suitable opening is left for its easy operation. A stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. Each window shutter having an adjustable stay made out of 18 x 5mm at 0.70 Kg/m MS Flat of length 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS Flat of 18 x 5 mm at 0.70 Kg/m, welded to the shutter at two place equivalent from each other from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge to edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers. All sections should be in confirmed with IS 7452 / 1990. The cost includes cost of all materials, labour charges and other incidental charges, etc., complete.
-
-
-
... More
Three Leaves Shutters(1.50 x 1.30m)
16
-
-
... More
Two Leaves Shutters(1.00 x 1.30m)
4.5
-
-
... More
Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fising as directed by the departmental officers.
6
-
-
... More
Supplying and fixing mild steel iron grill for windows ventilators and grill gate etc., including one coat of red oxide primer using M.S angle of size 40 x 40 x 6 mm and grill using 20 x 6mm M.S flat and necessary hold fast with M.S angle of size 40 x 40 x 6 mm - 230 mm long spliced at end is to be provided at appropriate places for fixing the grill etc., complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.
12602
-
-
... More
Providing and fixing Hand Rail made out of SS 304 grade 50mm dia Stainless steel tube of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel tube of 1.00mm thick as vertical at 900mm centre to centre with 2 Nos. of 25mm dia horizontal stainless steel tubes of 1.60mm thick in between as per the details shown in the drawing and as directed the rate shall include for grouting with concrete into necessary supporting arrangements of handrail verticals and in floor welding the base cup of the post into slab reinforcement, polishing butting and protecting the hand rail surface etc., complete as directed by the departmental officers.
70
-
-
... More
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
325
-
-
... More
Supplying, fabricating, erecting and fixing Hilux (or)
Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level.Using Hilux Board Plain Sheets (10mm thick)
380
-
-
... More
Supplying and fixing of SS False Ceiling
220
-
-
... More
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign, matters loose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.
455
-
-
... More
Supplying and filling Brick jelly lime concrete 1:2.5 and two using 40mm Jelly in lime Mortar 1:2.complete complying with standard specification and as directed by the departmental officers.
-
-
-
... More
In Ground Floor
22
-
-
... More
In First Floor
20
-
-
... More
In Second Floor
41
-
-
... More
In Third Floor
17
-
-
... More
Supplying and fixing of PVC Trims
2550
-
-
... More
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below. (Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. (The chemical should be got approved of Executive Engineer before use on work).
plinth area – surface treatment
stage-1 :- Completion of earth work for column footings before laying plain cement concrete 25mm dia Hole spaced at 30cm center to center on both direction will be made at the bottom of earth workand the chemical will be poured in the holes and will be sprayed in the four sides of earth work at the rate of 3 litres of chemical solution (Chlorophyrifos emulsion diluted in ration 1:19 (One emulsion and 19 water ) per square metre payment shall be made after completion of 3 stages.
1040
-
-
... More
stage-II :- After filling the basement before laying flooring concrete with filling crushed stone sand(M-Sand) 25mm dia holes to adepth of 450mm will be made inside the basement and the chemical will be poured in the holes at the rate of 3 litres of chemical solution (Chlorophyrifos emulsion diluted in ration 1:19 (One emulsion and 19 water ) per square metre payment shall be made after completion of 3 stages.
-
-
-
... More
Peripheral treatment
stage-III.On completion of building and leveling the outer area adjacent to the walls column ground ponds of size (900X300 mm will be filled in the ponds at the rate of 3 litre of chemical solution per Rm payment shall be made after completion of 3 stages.
Stage-IV.Spraying termite solution around the building (Out side of the building) by making crowbar holes around the building before laying the plinth protection. This holes has to be closed after the treatment
-
-
-
... More
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
(a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.
-
-
-
... More
50 Litres
2
-
-
... More
250 Litres
2
-
-
... More
Supplying, laying and jointing CPVC (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with higher pipe thickness) Standard Dimension Ratio- 11)of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using cement SOLVENT (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. External - Below Ground level
-
-
-
... More
40 mm CPVC Pipe
200
-
-
... More
Supplying, laying and jointing CPVC (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with higher pipe thickness) Standard Dimension Ratio- 11)of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using cement SOLVENT (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.External-Above Ground level
-
-
-
... More
40 mm CPVC Pipe
40
-
-
... More
32 mm CPVC Pipe
490
-
-
... More
Supplying, laying and jointing CPVC (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with higher pipe thickness) Standard Dimension Ratio- 11)of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using cement SOLVENT (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal-Above Ground level
-
-
-
... More
25 mm dia CPVC pipe
470
-
-
... More
20 mm dia CPVC pipe
330
-
-
... More
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
... More
40mm dia Gun metal Gate Valve
12
-
-
... More
32mm dia Gun metal Gate Valve
10
-
-
... More
25mm dia Gun metal Gate Valve
10
-
-
... More
Supplying and fixing in position the following CPVC Specials of heavy type and approved quality and good variety including the labour for cutting, threading / pasting, sundries, fixing CPVC specials etc., complete complying with standard specification and as directed by the departmental Officers. (The CPVC specials should be got approved by the Executive Engineer concerned before use on works.)
-
-
-
... More
CPVC Elbow
-
-
-
... More
40 mm dia
8
-
-
... More
32 mm dia
16
-
-
... More
25 mm dia
50
-
-
... More
20 mm dia
50
-
-
... More
CPVC Union
-
-
-
... More
40 mm dia
5
-
-
... More
32 mm dia
10
-
-
... More
25 mm dia
10
-
-
... More
20 mm dia
5
-
-
... More
CPVC Tee
-
-
-
... More
40 mm dia
5
-
-
... More
32 mm dia
10
-
-
... More
25 mm dia
50
-
-
... More
20 mm dia
50
-
-
... More
Reducer Elbow
-
-
-
... More
32 mm x 25mm
4
-
-
... More
25 mm x 20mm
4
-
-
... More
CPVC Reducer
-
-
-
... More
32 mm x 25mm
4
-
-
... More
25 mm x 20mm
4
-
-
... More
Reducer Tee
-
-
-
... More
32 mm x 25mm
30
-
-
... More
25 mm x 20mm
30
-
-
... More
CPVC Coupling
-
-
-
... More
40 mm dia
10
-
-
... More
32 mm dia
50
-
-
... More
25 mm dia
30
-
-
... More
20 mm dia
30
-
-
... More
Supplying and fixing in position 15mm dia. Tap ( Heavy duty ) of best approved make and quality including cutting, threading wherever necessary and fixing in position etc., complete complying with standard specification. Taps to be used on works should be got approved from the Executive Engineer before use).
-
-
-
... More
Screw Down Tap
50
-
-
... More
Pillar Tap
15
-
-
... More
Elbow Action Tap
15
-
-
... More
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). a) White glazed Wash hand basin of size 550x400mm without Pedestal
40
-
-
... More
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sand(M-Sand) cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand(M-Sand) and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
13
-
-
... More
Supplying and fixing in position White Glazed EUROPEAN WATER CLOSET of best quality and approved make with 100mm P or S trap with double flapped rigid PVC. seat cover with chromium plate brass hinges, including supplying and fixing PVC. Low level flushing tank 10 litre capacity of approved quality on wall with teak wood plugs, brass screws and 2 numbers 15mm dia gun metal wheel valve, 15mm dia nylon connection wihout CI Bracket and giving necessary water supply connection as directed by the Departmental Officers. The rate includes cost of 100mm dia PVC. Pipe 60cm long including cost of 3 Kg of white cement, 6Kg of cement, spunyarn, shellac, thread ball, teak wood plugs, brass screws 75mmx10mm. The European Water Closet and flushing tank should be got approved by the Departmental Officers before use on work.
a)White glazed EWC with 10 litres capacity, PVC flushing tank fixed on wall without CI Brackets
26
-
-
... More
Supplying and fixing best approved best quality Stainless Steel Health Faucet with stop cock of size 150x150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The Health Faucet should be got approved by Executive Engineer before use on works).
26
-
-
... More
Supplying and fixing in position best quality Stainless Steel Sink, 600x600x200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
2
-
-
... More
Supplying and fixing in position best quality SS Scrub up Sink of size 1200 x 550 x 180mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
4
-
-
... More
Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
4
-
-
... More
Supplying and fixing position PVC Nahani Trap / Floor Trap of 100mmx75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sand(M-Sand) and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three crushed stone sand(M-Sand)) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
-
-
-
... More
PVC Nahani Trap of size 100 x 75mm with stainless steel gratings
94
-
-
... More
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on works)
40
-
-
... More
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
51
-
-
... More
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
51
-
-
... More
Supplying and fixing in position of P.V.C water storage tank of best approved quality and brand with the capacity of 1000 Litres with accessories including giving necessory connections etc., complete as directed by the departmental officers. ( The P.V.C. water storage tank should be got approved by the Executiove Engineer before use on works.)
-
-
-
... More
1000 litre capacity
4
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation,sand filling and refilling charges etc. will be measured and paid separately in the cases where the pipe lines are proposed to laid Below Ground Level
-
-
-
... More
160 mm dia
299
-
-
... More
110 mm dia
130
-
-
... More
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level
-
-
-
... More
160 mm dia
72
-
-
... More
110 mm dia
362
-
-
... More
75 mm dia
60
-
-
... More
Supplying and fixing in position of the following P.V.C. specials of best approved quality confirming to B .I.S. and providing leak proof joints with P.V.C. adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the P.V.C .pipe dismantling the brick masonry RCC floor or roof slab and making good the disturbed portion to original conditions etc. complete complying with standard specifications. (The P.V.C. specials should be got approved from the Executive Engineer before use on works).
-
-
-
... More
160mm dia Plain Elbow
7
-
-
... More
160mm dia PVC "Y" with Single Door
30
-
-
... More
110mm dia PVC Elbow
17
-
-
... More
160mm dia PVC bend with Door
7
-
-
... More
110mm dia PVC bend with Door
17
-
-
... More
110mm PVC "Y" with Single Door
25
-
-
... More
110mm PVC Tee with Double Door
25
-
-
... More
75 mm dia PVC Elbow
5
-
-
... More
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
2
-
-
... More
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).
-
-
-
... More
110 mm dia
17
-
-
... More
75 mm dia
5
-
-
... More
Manufacturing, supplying and fixing in position plain cement concrete precast pavement slab of size 450mm x 450mm of 50mm thick in Cement Concrete 1:2:4 (One cement, Two crushed stone sand(M-Sand) and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three crushed stone sand(M-Sand)) to full depth of slab etc., complete complying with standard specification and as directed by departmental officers
70
-
-
... More
Casting and fixing in position of precast reinforced cement concrete slab of following thickness in Cement Concrete 1:2:4 (one cement, two crushed stone sand(M-Sand) and four hard broken granite stone jelly) excluding cost of reinforcement grill in position but including moulding charges, casting of slabs, finishing, curing and fixing the precast slabs in position in all floors etc., complete complying with standard specification.
-
-
-
... More
50mm thick slab using 20mm HBGS Jelly
50
-
-
... More
75mm thick slab using 20mm HBGS Jelly
26
-
-
... More
Supplying and filling ISS metal of following size in dispersion trench around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the departmental officers etc. complete.
-
-
-
... More
20mm ISS Metal
6.5
-
-
... More
40mm ISS Metal
6.5
-
-
... More
Supplying and fixing of Vertical blinds ( ordinary)
87
-
-
... More
Supplying, fabricating and fixing in position UPVC along with SS mesh with shutter arrangement to drain the water extruded UPVC section of the sizes 50mm x 39mm, wire diameter 0.27 kg/m with necessary accessories such as best quality runner, lock, including cost of all materials, labour power consumption required for fabrication, drilling holes in necessary wall where ever necessary with power drills and made same to original condition after fixing. CER NO. 29 CE/MDU/19-20
292
-
-
... More
Providing and fixing Aluminium Composite panel cladding to cover using Alstrong (or) Alex (or) equivalent of 3mm thick with Kynar based PVDF coating consisting of 3.40mm Anti oxide polythene core of LDFE sandwitched between 2 skins of 0.25mm aluminium sheet making a total panel thickness of 3mm Aluminium composite panels with 38 x 38 x 2.50mm thick aluminium "L" angle frame work with necessary hardwares, drilling, fixing with neat finishing and also inclusive of conveyance, loading and unloading etc., and as direted by the drawing and designing by the departmental officers.
190
-
-
... More
Designing the Semi Unitised Structural Glazing System withopen groove Joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept., Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composote panel, openable, window panels on a continuius framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the saystem both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere
80
-
-
... More
Supply and Erect tensile membrane structure or Open to sky and us Shelter as per the Specification and Design below Steel: Steel design fabricated and supplied and erected as per the analysis wing NDN design software with minimum thickness of 3.20 mm thickness and approx. tonnage of 1.20 to 2.50 kg Wt/Sq.ft varying as per the design shown in the drawings the steel to be of ISI approved make as has to fabricated and supplied with one coat of Epoxy primer to site. The lugs/clears and base plates to be prefabricated and to comply as per design standards of Reports. The steel to be designed for a wind speed of 55m/sec as per the Is Code. The steel to be finished with two coats of Epoxy white roller finish at site Fabric: The fabric has to be PVC fabric with cross link of Tx-30 with a life expectancy & 5 years and has to be patterned as per NDN software and has to be welded and high frequency machine with a minimum weld width of 40 mmq.ft
50
-
-
... More
The fabric to be fixed with necessary Aluminum extrusion of minimum 3.20 to 4.00 mm thickness flats or special extrusion. The fabric fixed should be made in such a way sufficient stiffness is there in the fabric.
-
-
-
... More
Drilling of 6" or 150 mm dia vertical bore in all Soils and hard rock area of any required depth as directed by the departmental Officers including labour charges for inserting casing pipes assembles in the drilled holes excluding cost of PVC casing pipes of required length including transportation charges for Rig supporting vehicles from one place to another place etc.,complete complying with standard specification.
-
-
-
... More
Upto 150m Below Ground level
300
-
-
... More
From 151m to 180m
60
-
-
... More
From 181m to 210m
60
-
-
... More
From 211m to 240m
60
-
-
... More
From 241m to 270m
20
-
-
... More
Supplying and delivery of PVC Casing pipe as per IS 12818/1992 with ISI Marking of 160mm diameter in 3m length with screwed and socket end and centering guides for every 15m length of pipe to suit deep bore wells for delivery including loading, unloading, freight, insurance etc., complete (Rate inclusive of Excise duty).(without Slot.)
60
-
-
... More
Supplying and fixing of suitable PVC endcap (6kg/cm2)for 6"dia borewell of best quality with ISI mark (the PVC endcap should be got approved by the departmental officers before execution)
2
-
-
... More
Supply of 5 HP submersible motor with pumpset having duty of 50 lpm x 75m pumpset with delivery pipe of size 32mm dia with motor wet type (Three phase) model equivalent to KSB / CORA / CRI 2HP suitable for 150mm dia borewell with having model to ISI mark of approved quality with necessary accessories etc., complete.
2
-
-
... More
Supplying erecting and commisioning 2.00 HP mono block motor with accessories conforming to ISI std assembling over the clamp in dismantling brick masonry fixing bed clamp with angle purlin etc in to the wall redoing dismantling portion neatly including Labour for fixing the motor with Proper alignment to the suction delivery pipe etc Complete
2
-
-
... More
Supply of 4.00 sq.mm three core flat type copper cable with IS 694/1990 wire.Twad SOR 2022-23 Item no 12.1 Page 120
530
-
-
... More
Supplying and erecting New UPVC suction submersible heavy pipe of approved quality and variety conforming toe ISI with ISI mark of the following size in bore to standard length of 6m conforming to work site, fixing specials but excluding cost of such specials cutting and threading of pipes but including jointing the pipes labour charges, for erecting of pipes in drilled bore to required depth as directed by the Departmental Officers complete complying with standard specification. The UPVC pipe should be got approved by the Departmental Officers before use on work.
-
-
-
... More
32 mm dia UPVC pipe - Internal - BGL
480
-
-
... More
Supplying of Nylon Rope for Borewell. The rope should be got approved by the departmental officers before use on work.
530
-
-
... More
Supplying and Fixing 3 Phase Panel Board including labour charges.Twad SOR 2022-23 Item no 11.1 (i) Page 114
2
-
-
... More
Labour charges for erection of Submersible pump set in bore well including fixing and jointing submergible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the and erection of panel board consisting of TPICN switches, starter, volt meter, ammeter, three pilot (indicating) etc., complete complying with standard specification.Twad SOR 2022-23 Item no 17 C (i) Page 308
2
-
-
... More
Fire Fighting
-
-
-
... More
Supply and fixing of fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instataneous coupling with rotating wheel to open and close the valve including MS flanfe of table "E" bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
12
-
-
... More
Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental
officers.(Make:OMEX/KARTAR/LIFEGUARD/SAFE GUARD/EQUIVALENT.
24
-
-
... More
Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
12
-
-
... More
Supply of Fire fighting application M.S.Hose Box to keep two number of Hoses and one number of branch pipe with nozzle having proper glass windw type double door with universe open key, painted inside white and outside PO red. Near every hydrant point including conveyance, all inicidental charges, necessary scaffolding and redoing the dismantled portions toits original condition wherever found necessary etc., complete as per standard specification and as directed by the departmental officers.Make : OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
12
-
-
... More
Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade Inlet with necessary Gunmetal 63mm dia non return spring shutter arrangements so that to control one way flow at the time of emergengy water supply by fire nad recuse service fire engine entry, including conveyance, all incidental charges, necessary scaffoloding and redoing the dismantled portion to its original condition wherever found necessary etc., complete as per standard specification and as directed by the departmental officers.Make : KIARTAR / OMEX / EQUIVALENT
1
-
-
... More
Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 meters long so as to extended to necessary distance by self roling spindle wheel including necessary 20mm dia ball valve & open & close spry nozzle, warm clip, etc., as per standard pattern of any reputed make ar every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffoloding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specificatin and as directed by the departmental officers.Make : OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
12
-
-
... More
Supply, erection, testing and commissioning of following MS „C‟ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table „E‟, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT
-
-
-
... More
150 mm dia
200
-
-
... More
100 mm dia
180
-
-
... More
80 mm dia
12
-
-
... More
25 mm dia
12
-
-
... More
Wrapping and coating anti- corrosive treatment for the following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe as per standard methods as per standard specifications and as directed by the Departmental Officers.
-
-
-
... More
150mm dia
110
-
-
... More
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Nonreturn valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table „E‟, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
100mm dia
4
-
-
... More
Supply ,erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’ gaskets , bolts & nuts including conveyance all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the
departmental officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
4
-
-
... More
Supply, erection, testing and commissioning of following sizes of Heavy Duty Foot Valve including all accesories, such as, MS flange of table „E‟, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
... More
150 mm dia
3
-
-
... More
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
3
-
-
... More
Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 2850 LPM at 70 metres head with Electrical Motor of 60HP of 415 volt, 3 phase connection complete with base plate and
accessories. (Make Kirloskar or Equivalent). The rate inclusive of neessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers
1
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects as required.
a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 2850 LPM against
a total head of 70 metres, so as to ensure a minimum pressure of 3.5 kg. per sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210- 1978
and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft of stainless steel.
b. 68 BHP, 1500 RPM water cooled with radiator,
diesel engine conforming to relevant BS & IS standard complete.
c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoid switches etc.
d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc............
1
-
-
... More
e. Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary
MS support arrangements from wall or ceiling as per site condition.
f. Dash board consisting of the instruments like Temperature Gauge, Galvano Type DC Ammeter, Lubricant Oil Pressure Gauge, Ignition Switch, Emergency Stop and all other protection equipments as per specification, stop soleneid for
auto stop in the event of fault with audio indications, painted with Post Office Red Colour etc., as required.
g. 12 V / 24 V, storage battery, maintenance free tape,
180AH rating. MS fabricated common base plate, coupling guard, foundation bolts, etc., as required.
h. Positioning the Diesel Engine Driven Fire Pump over
cement concrete foundation using suitable size anti vibration mounting arrangements. All works including conveying, fixing and incidental charges, etc., completed as per standard specification and as directed by the Departmental Officers. (Make: KIRLOSKAR / EQUIVALENT).
-
-
-
... More
Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)
1
-
-
... More
Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalised with hinged lockable door dust and vermin proof, cable alley, inter connection having switch gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings.
A. Common Panel in Fire Pump House
(i). Incomer
a. 1 No. 600A TP & N SDFU with HRC fuses
b. 1 set of 600A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply
c. 1 No. (0-500A) digital ammeter with selector switch & CTs
d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses
e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses
1
-
-
... More
(ii). Outgoing
a. Main Fire Pump 400 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual / OFF operation - 1 No.
b. Jockey Pump
125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No.
c. Diesel Engine Control comprising of:
1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start / stop in manual mode.
2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication.
3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter.
-
-
-
... More
4. All standard relays and accessories for automatic operation of diesel engine.
5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
... More
Supply, installation, testing and commissioning of Micro Processor based conventional 8 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
1
-
-
... More
Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)
200
-
-
... More
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)
8
-
-
... More
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)
8
-
-
... More
Supply, installation, testing and commissioning of fire alarm electronic Isolater Modular Make : RAVEL or equivalent
5
-
-
... More
Supply, installation, testing and commissioning of fire alarm 5A Power Supply Unit
1
-
-
... More
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
30
-
-
... More
Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.
1
-
-
... More
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: GURU / ISI MAKE / EQUIVALENT
10
-
-
... More
Supply and laying of following sizes of Armoured Aluminium / Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX /
EQUIVALENT.
-
-
-
... More
3 core 185 sq.mm armoured aluminium cable
55
-
-
... More
2 core 1.5 sq.mm. armoured aluminium cable
2500
-
-
... More
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
... More
100mm dia
33
-
-
... More
80mm dia
8
-
-
... More
Supplying and fixing BUTTERFLY VALVE Slim Seal type cast iron lever operator type with required flanges, nuts, bolts etc. complete.
-
-
-
... More
150 mm dia
1
-
-
... More
Supply and kept in position of Trolley Mounted Water CO2 Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS13385, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
5
-
-
... More
Supply& fixing of illuminated auto glow signage’s word “EXIT” with standard specifications
25
-
-
... More
Supply & fixing of DO & DONOT instruction board as per standard specifications
5
-
-
... More
Supply and placing of 1000 ltr capacity HDP tank cylindrical type including ms stand,level indicators etc.,
1
-
-
... More
Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT. The rate includes conveyance, all incidental charges, necessary scaffolding and redoing the dismantled portions to its original condition and labour charges etc.,as directed by the departmental officers.
1
-
-
... More
Supply and fixing of carbon-di-oxide Gas type 2 kg capacity Fire Extinguisher as per New IS No. 15683 complete with with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., Including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed
by the departmental officers. EXCELLENT/SAFETY FIRST/EQUIVALENT
8
-
-
... More
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.
3
-
-
... More
Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
2
-
-
... More
Supply and installation of NP3 – Air Release Hume Pipe 300 NB
1
-
-
... More
Supply and erection ,testing commisioning of flanged Y strainer heavy duty including all accessories like GI bolts, nuts, washers, insertion gaskets etc SS mesh internals 150 mm dia
1
-
-
... More
STP
-
-
-
... More
Design Fabrication, Supply and erection of bar screen made of MS 10mm square bars to suit the channel. Inner size of channel 1000mm , wide 900mm liquid depth and 1200mm length. The MS 10mm square bars should be properly epoxy coated to avoid the rusting of bars. The spacing between the square bar is 5mm, so that the particles above 5mm will be retained in the entry channel and will be cleared by hand rac manually. The bar screen should be kept at an inclination of 60o. The bar screen is fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of MS bars, fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design Supply and erection of Tube Settler feed pump with motor with the capacity of 1.25m3 /hr as per the design. The type of the pump is horizontal, Centrifugal, Non clog, self priming coupled with base frame arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1.0 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ .Motor make is Kirloskar/CRI/ Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of Coagulant dosing pump with the capacity of of 0-6 liters per hour @ 4 kg/cm2, 0.16 HP with electronic driven construction of pump is Polypropylene . The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 50 liters with HDFE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply and erection of Flocculent dosing pump with the capacity of 0-6 liters per hour @ 4 kg/cm2, 0.16 HP with electronic driven construction of pump is Polypropylene . The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 50 liters in HDPE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply and erection of air blowers Ring Blower with electrical Motor, 16 m3/hr, 0.5 HP motor . Air blower with motor are provided for one number for operational and one number for standby. The Air blower make is of Raico/Equivalent to suit the design requirements. The Air blower with motor is fixed in a base frame. Necessary foundation bolts, nuts are provided to fix the total coupled assembly of Air blower and motor in the concrete bed. The cost includes the cost of Air blower, base frame , diffusers, foundation bolts, erection charges, transport charges, labour charges., etc., complete.
1
-
-
... More
Design, Fabrication, supply, erection of tube settler media with PVC 1000mm depth 1.1 mm thickness in hexagonal chevron shaped fixed with 60 degree slope in tube settler tank (1 m3) including the cost of tube settler media, erection charges , transport charges, labour charges.etc., complete
1
-
-
... More
Design Supply and erection of Sand Filter feed pump with motor with the capacity of 1.25 m3 as per the design. The type of the pump is horizontal, Centrifugal, flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1.5HP. The motor type suitable for 3 phase supply, 440v, 50hz . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply and erection of Oxidant dosing pump with the capacity of of 0-6 liters per hour @ 4 kg/cm2, 0.16 HP with electronic driven construction of pump is Polypropylene. The pump is fitted Base frame necessary bolts and nut . The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of Multi graded Sand filter unit with 406 mm dia and 1650 mm height. Multi graded Sand filter is a vertical, cylindrical vessel made out of FRP The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of Multi graded sand filled over & under bed media of pebbles and gravels. The size and height of the filter media is as per the design and standards. The joints are properly vessel (Multi graded Sand Filter ) is supported by FRP legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges and painting etc., complete.
1
-
-
... More
Design Fabrication, Supply and erection of Bag filter with 10 micron with1.25 m3/hour with Polypropylene Gadridges 10" length. The cost includes cost of bag filter, stand , fabrication charges, and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of Advanced Oxidation Process with Ozone Generator includes the ozone recirculation pump in 4 m3 /hour. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . ozone generator with a capacity of 30 gms / hour with oxygen concentrator, including the cost of epoxy coating for ozone reactor tank, water ozone mixing equipments with level gauge, safty valve with Recirculation Pump 1 HP motor. The cost includes the ozone generator, oxygen generator, ozone recirculation pump, motor, recirculation pump, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply, fabrication and erection of Activated Carbon filter unit with 406 mm dia and 1650 mm height. Activated carbon filter is a vertical, cylindrical vessel made out of FRP The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of Activated Carbon filled over & under bed media of Course Silex. The size and height of the filter media is as per the design and standards.The joints are properly vessel (Multi graded Sand Filter ) is supported by FRP legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges and painting etc., complete.
1
-
-
... More
Design Supply and erection of Back wash pump with motor with the capacity of 2.5 m3 /hr , head of 3m as per the design. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1.5 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design Supply, Fabrication and erection of piping for sewage treatment plant of capacity 50m3. The piping work consists of 1) Suction lines from Equalization tank, delivery lines to Tube settler thro' raw sewage transfer pumps. 2)Pipe lines for Blowers to Equalization tank Both MS and PVC pipes with necessary valves, pressure gauges are used as per the design and suit the flow rate. 3)Pipelines from Clarifier tank Bag filter and Multigraded sand filter 4)Pipe line from multigraded Sand filter to Ozone reactor and Ozone reactor to Activated Carbon Filter 5) Pipe line from Backwash pump to Mutigraded filter and Activated Carbon filter 6) Necessary pipe lines , valves, pressure Gauge for filters, flow meters for tube settler feed, Sand filter , Activated Carbon filter, float level switch The total piping network as given above, is within the sewage treatment units. The cost includes the cost of pipes (MS, UPVC and 1" dia to 3"dia), Specials, valves, pressure gauges, flow meters, pipe fittings, fabrication charges, labour charges, transportation charges etc, complete.
1
-
-
... More
Design and Providing and Fixing of Liquid Level Controller at all Tanks. Including suitable Electrical Panel. Suitable Cables and all other necessary accessories etc., Complete. Input Voltage : 220V AC/50 Hz ( Other Input Voltages on request) Motor Protection : Voltage Variation +/- 20%, Dry Run Condition 60 Sec Delay after return to normal line voltage and power on. Motor Trip Delay : 45 Sec after Dry Run LED Indications : Sump and tank level indication on the facia. Hi/Low/Normal Voltage indication, Flow indication, Pump Motor On/Off /Trip. Auto: Pump Motor switched on automatically when level falls below set low. Manual : Auto / Manual Switch for manual operation of pump motor. Audio Alarm : Audio Alarm on Dry Run. Mute : Feather touch Push-button to silence the Alarm Output contact rating : One N/O Contact for DOL Two N/O, N/C Contacts for Starters Level Sensing Technology : Current loop with Cyclic Sampling. This ensures long sensor life. Sensors : Standard Conductive type.
1
-
-
... More
ETP
-
-
-
... More
Design fabrication, supply and erection Bar screen 10mm square bars to suit the channel. The SS square bar should be properly epoxy coated to avoid the rusting of bars. The spacing between the square bar is 5mm So, that particulars above 5mm will be retained in the entry channel and will be cleared by hand rac manually. The bar screen should be kept at an inclination of 60⁰. The bar Screen in fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of, Ms bars, Fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete.
1
-
-
... More
Design, supply and erection of Neutralization or Precipitation tank for 2 m3 flow per hour with Dosing System for Oxidant dosing and suitable agitator , base frame, foundation bolts, labour charges, erection charges, transport charges precipitation tank etc., complete the rates
1
-
-
... More
Design Supply, fabrication and erection of on line disinfection for effluent with Ozone in Ground Level Reactor including submersible Mixing arrangement @ the pump make is CNP / Toshio Equivalent, The capacity of the motor is 1 HP. The type of the motor is Self aspirating, non clogging with SS304 impeller , and SS 420 Shaft, suitable for 3 phase supply, 440V, 50HZ including the cost of water ozone mixing equipments with level gauge, safety valve includes the ground level reactor, motor Submersible mixing unit base frame, SS Casing,Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.
1
-
-
... More
Design, Supply of Ozone Generator with Capacity of 10 gm/ hour with oxygen Concentrator, including the cost of Ozone Generator, Oxygen Concentrator and Control Panel etc. Complete
1
-
-
... More
Design, Fabrication, supply, erection of electrical panel board with necessary starters, main switches, voltmeter, ammeter, and electrical cables of required sizes from pumps to panel board as per design, The size of panel board is approximately 2 feet x 2 feet, fabricated with Ms sheets and powder coat. Necessary provisions are given in the panel board for main switch, starters, switches, voltmeter ammeter as per the design to suit Effluent Treatment plant. The cables are run from panel board to the all pumps and other electrical accessories such as level switches dosing pumps Pumps, mixing units etc complete., the cable sizes are as per the design and suitable for electrical motors fixed in the effluent treatment plant. No lighting points are considered. The cost includes the cost of panel board, starters, switches, voltmeter, ammeter, main switch, cables for motors, labour charges etc., complete.
1
-
-
... More
Supplying and fixing following Burma Ornametal teak wood entrance door asper the drawing and desings approved by the departmentals offices. The outer framce of the door sis 150mmx125mm teak wood.The main door shutter opening size is 1.58mx2.35m. The main door should be double leaves and each door shutter outer frame of size 150mx50mm teak woods.The door Panel shall be of 50 mm thick teakwood planks with orenamental design approved by the Executive Engineer.The lock Rail shall be of 200x50mm thicks teakwood.All the doors frames are made out of 150mmx125mm teak wood of best quality.The door frames and shutter shall be given two coats of best approved quality melamine finish.The rate inclusive of cost of approved quailty teakwood,brass hings,brass tower bolts,brass aldrops,door stoppers,brass screws.
18.1
-
-
... More
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete complying with standard specifications
5
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light Modular point / fan point (for electronic regulator) (5 points / Coil) (Higher End ) (DATA-1)
574
-
-
... More
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (DATA-2)
101
-
-
... More
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Modular Light point (Higher End) (DATA-3)
12
-
-
... More
supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD-526)
63
-
-
... More
Supply and fixing of single box type 4'-20 W LED fitting (Higher End) with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed Copper leads from terminals to the fitting. (DATA-4)
332
-
-
... More
Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp. (SD-581)
173
-
-
... More
Supply and fixing of 9W LED lamp (Higher End) in existing BH point. (DATA-5)
32
-
-
... More
Supply and fixing of WT bulk head fitting with guard suitable for 9W LED lamp (Higher End) with lamp. (DATA-6)
44
-
-
... More
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32 mm dia. GI pipe (class B) with 1 no. 32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD-535)
22
-
-
... More
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall. (SD-115)
42
-
-
... More
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. (SD-120)
42
-
-
... More
Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW round block with 1 Module GI flush mounting box, 1 Module combined plastic cover plate and 1 module Modular type Bell push Switch with indicator complete. (The GI flush mounting box,cover plate and switch should be of Higher End). (DATA-7)
3
-
-
... More
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 464)
15
-
-
... More
Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-476)
22
-
-
... More
Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 524)(Combined plug)
162
-
-
... More
Supply and fixing of 1 no.6/16A two module socket, 1no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. (Higher End) (SD-488)
27
-
-
... More
Supply and fixing of 4nos.6/16A two module socket, 4nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
(SD-506)
16
-
-
... More
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)(SD-140)
43
-
-
... More
Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall with earth connection. (Higher End) (DATA-9)
10
-
-
... More
Supply and fixing of 63A FP MCB in sheet steel enclosure in flush with wall with earth connection. (Higher End) (DATA-10)
20
-
-
... More
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour. (for call bell ) (DATA-11)
250
-
-
... More
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-55) (for street light and 6A Plug)
200
-
-
... More
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (SD-57)(For combined plug, 32A DP)
3130
-
-
... More
Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD-59)(for modular 16A Plug and SPN)
950
-
-
... More
Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD-63) (for FP)
550
-
-
... More
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 613)
18
-
-
... More
Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 42 protection with 100A 4 pole MCB as incoming and 3Nos 100A DP RCCB as sub incomer and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (Higher End) (DATA-12)(POWER DB essential power and raw power)
22
-
-
... More
Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 42 protection with 63A 4 pole MCB as incoming and 3Nos 63A DP RCCB as sub incomer and 12Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (Higher End) (DATA-13)(7 SEG LIGHTING DB)
5
-
-
... More
Supply and fixing of Vertical type 6 way triple pole neutral MCCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 125A 4 pole MCCB as incoming and 6Nos 63A TP MCB as outgoing with suitable MS cable entry boxes on suitable angle iron frame on wall with earth connection only. (Higher End) (Raw power) (DATA-14)
6
-
-
... More
Supply and Run of 4 of 16 sq.mm. (101 / 0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( Data 15 ) (For lighting DB 63 A)
300
-
-
... More
Supply and Run of 4 of 25 sq.mm. (168 / 0.45) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( Data 16 ) (For 100 A 7 segment DB)
300
-
-
... More
Design supply, erection testing and commissioning of 800Amps cubical panel floor mounting type dust and vermin proof MV panel board made up of 16 SWG MS sheet steel rated for 433 volts, 50HZ AC supply as per the CEIG guidelines and latest IE rules comprising the following EB incoming bus bar: copper bus bar rated for 800Amps 2 runs of 50 mm x 6mm for phases and one number for neutral. EB supply incoming: 1 No of 800A 4 pole 433V, MV Air circuit breaker (L&T / Siemens / English Electric, GE, Alstom, C&S make) manual draw out type Thermal over load protection to IS 13947-2IEC 60947-2 with making capacity of 105KA and breaking capacity of 50KA at 600V AC with all accessories each fitted the following independent mechanism.
1
-
-
... More
1. Manual trip push button - 1No
2. Mechanical ON/OFF indicator - 1No 3. UV coil device suitable for 433 volts AC - 1No 4. No/NC auxiliary contacts-1set 5. CTs suitable for metering - 1 set 6. LED indicating lamp-2 Nos 7. Digital demand controller- 1No 8. Earth fault relay - 1No 9. Over current relay - 1No suitable capacity fuse controls for the systems - 1set Separate mould base for each pole for easy maintenance, all relevant protection, accessories, as per CEIG IE rules in force, with interconnection and terminations and required. Incoming :EB Incomer1- 800A ACB- 1 No ,
out going switches are as:630A,-1 No
250A Amps- TPN interior switch fuse disconnector with HRC fuse double break - 2 Nos (L&T / Siemens) 400Amps TPN interior switch fuse disconnector with HRC fuse double break-4 Nos (L&T / Siemens)
-
-
-
... More
The EB supply feeder are to provide with digital multifunction meter with CT, RYB indicator lamp and control fuses switches S&F of danger borad all switches and the ACB's should be given double earth connection by runs of 25x3mm copper flat. And two numbers 25 x 3 copper earth bus must be run around the panel as per IE rules. All live parts of the bus switches etc are to be shrouded with suitable thick hylum sheet and SMC support insulators should be with maximum creep age distance as per IE rules. All the out going feeder, bus bars should be extended for easy termination of LTUG cable and suitable removable type gland. All the copper flats inside the panel should be provided with heat shrinkable sleeves and lead coating in the termination points.
-
-
-
... More
The cubical panel should be mounted over the MS channel of size 3" x1 1/2" x 1/2". The cubical panel should be painted with anti corrosive red oxide and with powder coated epoxy paint. The capacity of the switch, cable direction, place of feeding shall be indicated clearly in all the switches.
-
-
-
... More
The operation and maintenance manual for the metering instruments and the AB switches shall be handed over to the department without fail. (DATA-17)(MV PANEL)
-
-
-
... More
Supply and erection of 250A capacity dust and vermin proof cubical panel board of Suitable 5.5'x5.5'x1' size with 2Nos Incoming switches and interlocking arrangements of size doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with 25 X 6 mm tinned cu. Flat for 3 phase , neutral and 2 Nos 25 x 3 mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches 25 X6 tinned cu. Flat for interconnection of 250A incoming switch to bus bar,
8
-
-
... More
25 X 3 mm tinned cu. Flat for inter connection 5Nos, 63A TPN, 2 Nos 125A TPN and 1 Nos 100A TPN outgoing Switch and fixing of multifunction meter (VAF) with suitable CT –coil, selector switches & indication lamps with HRC fueses connections complete etc.The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate 14 Nos 3 phase switches and supply and fixing of the following switches.
-
-
-
... More
1. 250 A TPN switch disconnector fuse units interior only with HRC fuses double break with interlocking arrangements-2Nos
2. 125A TPN switch disconnector fuse units interior only with HRC fuses double break- 2 Nos.
3. 63A TPN switch disconnector fuse units interior only with HRC fuses double break-4Nos The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base. (Data-19)
-
-
-
... More
Supply and laying of 2 Runs of 3 ½ x 240 sq.mm aluminium PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (DATA -20) (From NEW MV Panel to CCU RAISING MAINS 2 and Genset)
1600
-
-
... More
Supply and clamping of 2 Runs of 3 ½ x 240 sq.mm aluminium PVC armoured LTUG cable in Existing trench or on wall with MS Clamps. (DATA -21) (for 250 A panel clamping & RM2 and Genset)
240
-
-
... More
Supply and clamping of 3 ½ x 240 sq.mm aluminium PVC LTUG armoured cable on post or on wall with MS clamp. (SD-230)(RM 2 to 250 A Panel)
250
-
-
... More
Supply and fixing of brass cable gland for 3 ½ x 240 sq.mm. PVC armoured LTUG cable with earth connection. (SD-194)
58
-
-
... More
Supply and providing cable end termination of 3½ x 240 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete (DATA-23)
58
-
-
... More
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD 458)
500
-
-
... More
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. (SD 76)
550
-
-
... More
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 233)
25
-
-
... More
Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD-234)
15
-
-
... More
Supply and Laying of 3 core 240 sq.mm. aluminium HT XLPE 22kV (UE) cable through 300mm dia Half Round RCC Hume pipe in a trench to be excavated at a depth of 1 metre and refilling the earth to make good. (DATA-25)
10
-
-
... More
Supply and clamping of 3 core 240 sq.mm. aluminium HT XLPE 22kV (UE) cable on post or on wall with MS clamps (DATA-26)
10
-
-
... More
Supply and providing of 240 sq.mm. 3 core HT Cable Outdoor Terminations 22kV (UE) - Belted PILC Cables with necessary connection complete etc. (DATA - 27)
3
-
-
... More
Supply, erection, testing and commissioning of 22kV/433V, 500kVA outdoor type oil immersed Distribution Transformer of Dyn11 vector group, ONAN cooling, copper wound with energy efficieny of Level 2 with off load tap circuit with a tapping range of +5% to -5% in 5 steps with standard fittings and accessories (as per IS 1180-Part 1 with latest Amendments and fitted with the following:
1
-
-
... More
a) HT Bushing terminal arrangement
b) LT cable end box suitable for connection 3 run of 31/2 x 400 sqmm LTUG cables. c) Conservator with shutt of valve. d) Dehydrating slilicagel breather. e) Conservator drain plug valve. f) Tank drain plug value. g) 4 Nos Plain rollers. h) Thermometer pocket with thermomoter with capillary tubing for maximum reading position. i) Drain plug valve.
-
-
-
... More
j) Filter Valve
k) Oil filling with end cap
l) Oil Level gauge
m) Two body earthing terminal
n) Rating and terminal marking diagram plate.
-
-
-
... More
o) Lifting hooks / Lifting eyes / Jacking pad to facilitate movement to transformer and easy ground level. p) Off load hand operated tap changing switch at standby height from ground level. q) Tapping on primary winding for voltage variation +5% to - 5%. r) Neutral on L.V side to be available for 4 wire supply and brought out truf pushing for earthing. s) Air release device.
-
-
-
... More
t) The transformer should be supplied with first filling of oil. u) All removable covers shall be provided with weather proof hot oil resistance gaskets to prevent leakage of water into core, and oil from the tank.
v)100 / 5 A ratio Tape Insulated Ring Type "BPL" Low Tension Current Transformer (AE make / Eq) with Rated Burden of 15VA, Accuracy Class of 5P10 in suitable Metallic enclosure for transformer neutral - earth link terminal with necessary connections complete. (Make: ROWSONS / Kirloskar electric company/ IPL / Voltech). (DATA-1)
-
-
-
... More
Construction of Transformer plinth suitable foundation for 500 KVA outdoor transformer of size length 1.5m x breadth 1.5m x height 2.0m in the brick work, concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation in the above equipment with proper alignment. (quotation)
1
-
-
... More
Supply and clamping of 3 1/2 x 300sq.mm aluminium PVC armoured LTUG cable on post or on wall with MS Clamps. (SD-231) (For APFC Panel)
45
-
-
... More
Supply and fixing of brass cable gland for 3 1/2 x 300 sq.mm PVC armoured LTUG cable with earth connection (SD 195)
4
-
-
... More
Supply and providing cable end termination of 3 ½ x 300 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (DATA-28)
4
-
-
... More
Design, supply, erection of 8 stage 100 kVAR Automatic Power Factor Correction wall mounting vermin proof cubical panel made of 16 SWG CRCA sheet steel with supply and fixing of the following interior mounting capacitor chamber relay with metering chamber and compartmentalised outgoing feeders with suitable capacity MCB with panel board with provision for louvers and cooling fan for proper ventilation to manage heat load, with incoming - 200A TPN switch with 8 stage capacitor bank with necessary relay arrangements. 8 stage Capacitor (L&T/EPCOS make/Eq) from 1 KVAR to 100 KVAR
1
-
-
... More
1.stage-5KVAR 2.stage - 20 KVAR
3. stage -5 KVAR 4.Stage- 10 KVAR
5.stage-20 KVAR
6.stage-20 KVAR 7.stage-10 KVAR 8.stage-10 KVAR
-
-
-
... More
Bus bar: 25mm x 6mm tinned copper Metering : 1-200A Ammeter with CT coil 2) 0-500V voltmeter 3) Advance micro controller based intelegent power factor controller with self dianostic sensing and digital network analayset with software for mentiory and saving para meter of a suitable multi function meter. Indication: R,Y,B pilot lamp. The panel should be coated with Epoxy based painting and the whole assembly fixed in suitable cubical panel grouted in floor with connection complete.
-
-
-
... More
Supply, Installation, testing commissioning & Handling over of 1No 250 kVA / 200KW diesel generator set 0.8P.F, 3 ph, 415 Volts, 50c/s, 1500 RPM as detailed below.
1
-
-
... More
A. Engine: Water cooled diesel engine suitable for generating application (Kirloskar Green/ Cummins) developing shaft output of 125BHP at 1500 RPM under NTP condition as per BSS 5414-ISO 8528 . The engine shall comprise the following standard scope of supply.
-
-
-
... More
1) Dry type Air cleaner 2) Expansion bellow
3) Radiator, radiator fan and mounting
4) Air to air charge cooler
5) Exhaust gas turbo charger 6) Lube oil cooler and tube oil filter 7) Fuel filter (pre and micro)
-
-
-
... More
8) In-line mono-block fuel injection pump with governor and fuel feed pump
9) Electronic governor 10) 12V battery charging alternator
11) 12V Volt electric starter motor 12) Engine test certificate
13) Residential Muffler
14) Fly wheel with starter ring.
-
-
-
... More
Engine instrument panel: Engine control panel consisting of ON/OFF/START/KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator.
-
-
-
... More
Safety system of Engine:
-
-
-
... More
The engines shall trip for the following conditions with Visual alarm device.
1) Low lubricating oil pressure
2) High water temperature
3) Vee - belt failure and over speed
4) Low battery indication The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.
-
-
-
... More
B. ALTERNATOR : Alternator capacity of 250KVA (200KW), AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self excited, self regulated, Brushless design to run at 1500 RPM under NTP conditions conforming to BS 5000/IS 13364 (part-II) 1992 (KIRLOSKAR GREEN / STAMFORD) to be coupled directly to the Diesel engine and test certificate
-
-
-
... More
C) STANDARD CONTROL PANEL : The standard control panel (cubical) should be vermin proof and dust proof best quality sheet steel of 16 SWG CRCA MS sheet and floor mounted with suitable hinged glass doors and enamel painted. The panel should be completed with suitable Square/ Rectanguler copper bus bars with internal connections and with necessary cables and other accessories and with tapings for the incoming supply from the alternator and for the outgoing supply to the load and incorporating Suitable MCCB and HRC fuses, Set of control fuses, etc. with following facilities.
-
-
-
... More
1. UNDER / OVER LIMIT
i. High coolant Temperature
ii. Low lube oil pressure
iii. Over speed
iv. Start fail
v. Emergency stop
vi. Over load
2. FAULT INDICATIONS:
i. LLOP - Low Lub. oil pressure
ii. HWT - High water temperature
iii. OL - Over load
iv. E.STOP - Emergency stop
v. DG - Gen set ON
vi. LOAD - ON
-
-
-
... More
3.Metering & Protective relaying:
i) Multi function Digital panel meter with the functions of Ammeter , Voltmeter, Frequency Meter, Power factor meter, KW meter, KWHr Meter .- 1No 2) Current transformers of suitable ratio. – Set of 3Nos.
3) Earth fault relay – 1No
-
-
-
... More
4. Battery charger: A suitable automatic battery charger with suitable Transformer, Bridge rectifier and voltage regulator with selectable boost/float/trickle charging facility and automatic cut off function should be provided for charging the battery from mains in addition to the battery charging alternator fitted to the engine. The charger should have status indicator with LCD display and DC circuit breaker.
-
-
-
... More
D) ACOUSTIC ENCLOSURE: Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet. The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm power coating done after seven-tank surface preparation process of sheet metal. Canopy panel and door shall have inside lining of FIRE-RETARDANT foam / Wool(conforming to BS4735/BIS7888). Four hinged doors shall be provided to canopy. The maximum permissible sound pressure level for new diesel generator (DG) sets shall be 75 dB(A) at 1 metre from the enclosure surface.
-
-
-
... More
SURFACE TREATMENT – PAINTING : The enclosure shall be suitably treated for degreasing, de-rusting and phospating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES : Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any.
-
-
-
... More
WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg c/ambient temperature. No grounding required on the ground, only a level surface capable of withstanding the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading. Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.
-
-
-
... More
E) Base Frame : Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges.
-
-
-
... More
F) Fuel Tank : 450Lts. fuel tank shall be fabricated out of 14SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge.
-
-
-
... More
G) Battery : 24V 150AH battery system with AI frame work support
-
-
-
... More
H) Exhaust Piping : DG set should be offered complete with exhaust piping i.e. silencer is mounted and connected by means of MS pipe through flexible pipe to the engine manifold. Entire exhaust piping inside the canopy (cold Zone) is insulated by means of ceramic wool and aluminum cladded.
-
-
-
... More
I) Supply of maintenance and operating manual: 1. Operation & Maintenance manual for Engine with parts list
2. Maintenance Manual for Alternator with parts list
3. Engine test certificate 4. Alternator test certificate
5. Circuit diagram for control panel
6. DG set test certificate
7. CPCB compliance label fixed on canopy
-
-
-
... More
J) TESTING AND COMMISSIONING : After the installation of DC set on its foundation, the DG set should be tested and commissioned with First charging of lubrication oil to its level, first charging of fuel and first charging of battery and run the set for eight hours on full load test complete.(SR)
-
-
-
... More
ERECTION OF GENSET: Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation. (for 250 kVA Genset)
1
-
-
... More
Supply and fixing of 400A, 415V Enclosed Automatic Transfer Switch with following features
1
-
-
... More
Mode of Operation: Auto / manual /(Remote/RS485-Optional) 1) Automatic ON / OFF control of DG on mains failure
-
-
-
... More
2) Inbuilt control switch for selecting auto / manual mode 3) Double-Break Contact System offering High Short-time Withstand 4) High Mechanical and Electrical Life: as per relevant IS/IEC standard 5) Adjustable Time Delay(0.1sec to 3 hours)
6) Protections: UV/OV, Phase Sequence, Single Phasing, Frequency
7) Authorized Access Control through Password Protection
8) Terminal Shrouds, Phase Barriers & Source Separator. The enclosed ATS switch is mounted on suitable angle iron frame work with earth connection and necessary connections complete.(Make: L&T/Eq) (Data-33).
-
-
-
... More
Supply and installation of Additional length of exhaust pipe with silencer with suitable MS pipes so as to extend outside the generator room with necessary thermal insulation. (SR)
3
-
-
... More
Supply and clamping of 3 1/2 x 35 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps (SD-223)(For lift and vertical Power DB )
150
-
-
... More
Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection(SD-187)
15
-
-
... More
Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-236)
15
-
-
... More
Design, Engineering supply, fabrication, erection, testing, commissioning and handing over of 26 persons capacity bed cum passenger Gearless lift with machine room as per the following Technical specifications
2
-
-
... More
1. Location: Government Theni Medical College Hospital - 50 Bedded Critical care Block (G+3) 2. No of Lift : 1No
3.Type of lift : Hospital Lift
4. Capacity of lift : 26 persons capacity (1768Kgs)
-
-
-
... More
5. Speed : 1.0 m/s
6. Type of Drive: Specific variable voltage variable frequency V3F drive with enhanced ride comfort and near Zero leveling functions.
-
-
-
... More
7. No. of floors: (Ground + 3 floors) 8. Total Travel : 10.8 mtrs.
9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping
10. Construction of Car: Car Panel with High quality SS 304 grade car Neat hairline finish, S.S 304 grade hand rail, Perspex false ceiling, stretcher impact protection.
11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 4 Nos (one in front only)
13. No. of car entrance: one in front only 14. Car entrance door: power operated V3F drive side opening sliding SS 304 stainless steel hair line finish. 15. Landing entrance door: power operated V3F sliding, opening 18SWG stainless steel 304 grade hair line finish with provision for emergency key
-
-
-
... More
16. Lift well existing: 3000mm (depth) x 2400mm (width)
17. Lift pit depth available : 1600mm
18. Car size (Clear inside): 1600mm (wide) x 2400mm (Depth) 19. Car clear opening: 1200mm width x 2000mm height 20. Lift machine room as Existing size. 21. Power supply: 400/440 3 phase, 50 Cycles/sec A.C. supply for power and 230 V, 50 HZ, single phase, supply for lighting.
22. Control: Micro processor based simplex selective collective simplex
23. Car fittings: sleek LED light fitting with 300mm blown type fan
24. Lift well: R.C.C. construction with brick masonry.(Existing)
-
-
-
... More
25. Indication: UP/Down digital direction and position indicator for all landing and in car 26. Emergency Alarm Bell: Battery operated alarm bell to be provided with Automatic charging device.
27. Emergency light: Battery operated light to be provided with Automatic charging device.
28. Fireman’s switch: To be provided at ground floor
29. Minor builders work: to be provided by lift contractor.
30. Scaffolding: to be provided by lift contractor
-
-
-
... More
31. Sill angles and facia plates: to be provided by lift contractor
32. Steel for lift machinery: to be provided by lift contractor
33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year.
34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories.
-
-
-
... More
35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room
36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor.
37. Floor annunciator with music, included
-
-
-
... More
38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars.
c. Voltage stabilizer for circuit control.
d. Stainless Steel signal fixtures.
e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors.g. VF door Register signal
h. Call Register signal
i. Stainless steel facia plate for car operating panel and landing fixtures.
j. Steel ladder for machine room and ladder for lift Shaft pit,
k. On – Off switch for fan and light
l. Over load warning indicator With audio announcement.
-
-
-
... More
39. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries.
-
-
-
... More
40. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year
43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS) (SR) (G+3)
-
-
-
... More
Design, Supply,Installation, Testing of 400A, 3L+N, Sandwich type Aluminium Bus Bar Trunking system, Straight run feeder (Rising Main), insulation class F (155oC), Dust and Vermin proof made up of Galvanised iron, Aluminium Earthing Plug in points at every floor necessary angle iron supporting of Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.6 mm, N° of conductors: 4. Painted: RAL 7032 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C)Complete with Aluminium busbar or Cu Flexible with provision for rotary handle mechanism with bottom Cable entry and top Busduct outgoing provision. (L&T make/Eq)
26
-
-
... More
Supply and fixing of Flange End End Feed Unit suitable for 400A straight Run Feeder. (L&T make/Eq)
2
-
-
... More
Supply and fixing of Plug in Point(Tap off box) for Taping the Power from Raising main to Panel suitable for 400A straight Run Feeder. (L&T make/Eq)
16
-
-
... More
Supply and fixing of vertical spring hanger /Fix hanger (1 No per Floors per Riser) suitable for 400A straight Run Feeder. (L&T make/Eq)
8
-
-
... More
Supply and fixing of End Cover suitable for 400A straight Run Feeder. (L&T make/Eq)
2
-
-
... More
Supply and fixing the bolts and other Accessories to fix the raising main suitable for 400A straight Run Feeder.
2
-
-
... More
supply and fixing of Shaft Cantiliver angle support with C Channel for Vertical spring or Rigid hangers suitable for 400A straight Run Feeder.
8
-
-
... More
Supply and fixing End feed Panel with switchgear (Suitable for 400A 4P MCCB ) - Al Busbar Arrangement (L&T make/Eq)
2
-
-
... More
Supply and fixing of 250A FP MCCB switch gear (standard size) in the existing Plug-in Box / Tap-off Box. (L&T make/Eq)
16
-
-
... More
Design, manufacturing, supply, erection, testing, commissioning and handling over of 22kV, 800A, 25kA Outdoor Single panel special type VCB with roof bushings for incoming and outgoing with the following specifications
1. Horizontal Draw Out VCB fitted with Manual/Motor Operated spring charging mechanism with 230V AC Motor & Motor Control Switch, Mechanical ON / OFF indicator, Operation Counter, Automatic safety shutters & push button. 2. 110V DC operated Shunt trip Coil- 1 No
3. 110V DC operated Closing Coil -1 No 4. Spare Auxillary Contact -(6No and 6 NC)1 No 5. 110 V DC Operated Antipumping Future- 1 No .
6. Potential Transformer:
Single Phase, Resin cast, Dry type, Fixed type potential transformer with one set of HTFS / LTFS and one no. Neutral Link with rating of 11kV/1.732 -1 set
7. Current Transformer :
Single phase, Resin Cast, Dry Type Current Transformer with rating of Class 0.5 ,2.5 VA for meter -1 No and for protection with the class 5P10,2.5VA
1
-
-
... More
8. Metering:
96 sq.mm Digital Ammeter with Inbuilt Selector Switch -1 No
96 sq.mm Digital Voltmeter with Inbuilt Selector Switch -1 No
3Ф, 4 wire, 3 Element Digital MultiFunction Meter-1 No
9. Protection:
Numerical Non-directional IDMT combined 3 O/C+1 E/F relay with highset -1 No
Transformer fault annunciation type auxillary relay -2 No.
High speed Master trip relay- 1No
10. Indication Lamps :
VCB OFF/ON/Auto trip/Trip circuit healthy/Spring charge indication lamps -1 No
R,Y,B Phase Indication Lamps -1 set
11. Annunciation:
Facia, Static type Annunciator with inbuilt alarm, accept, test, reset push button with buzzers(M2-8/Eq)-1 No
-
-
-
... More
12. Control Switches / Push Buttons:
Breaker Control Switch (Close-Neutral-Trip)-1 No
Local Remote selector switch -1 No
Flush Head type Trip Circuit Healthy Push Button-1 No
Control wiring with appropriate colors- 1 lot
13. Busbar Ratings:
22KV, 800Amps Busbar with insulation -1 Set
Earth bus - 1 Set 14. Common For Switchgear :
Heater ON / OFF switch with filament type 100Watts space heater & thermostat , single phase switch with socket, 9W cubicle Lamp for panel illumination with snap type door limit switch, Fuses / MCBs for AC / DC control.-1 No
-
-
-
... More
15. MS Sheet steel enclosure & installation Incoming (Excluding Cable termination kits, lugs & glands) Roof Bushing
Outgoing (Excluding Cable termination kits, lugs & glands)Roof Bushing 16. Surge Arrester:22 KV,10 kA -1 Set
17. Power Pack - 1No
(MegaWin/SriWin/ABB make/ Equivalent) (Quotation enclosed)
-
-
-
... More
Addition and alternation to the Existing 6 pole structure for addition of new transformer by supply and fixing of 22kV AB switch, HG/DO fuse with necessary assembly on channel frame, 3 Nos 22kV Pin Insulators, 0 copper conductor as jumper from Structure to Fuse clamp and EB DP to new single panel VCB as incoming and from VCB to 6 pole structure as outgoing with all HT acessories as per CEIG Regulations. (Quotation enclosed)
1
-
-
... More
Supply and fixing of 800A FP ACB MDO type without protection unit with interlock arrangements in the existing MV Panel. (for Bus coupler) (DATA-29)
1
-
-
... More
Supply and fixing of 800 TPN Switch Disconnector Fuse Units in Sheet Steel Enclosure with HRC fuses Double Break with MS cable entry boxes in suitable angle iron frame work and necessary connections complete. (DATA-30)
1
-
-
... More
Supply and providing HT yard link fencing with fixing of 8ft height in RCC concreted pillar of size 0.7f x 0.75ft by excavated the earth with depth of 2ft putting concrete pillar and refilling the earth to make good and fixing of chain link fencing with size of (2"x2")x10SWG galvanised iron wire all around the HT yard with necessary binding wire with ISI earthing. RCC pillar with chain link fencing should be provided for the total area of 48x20ft for seperate the EB yard and consumer supply yard places.
1
-
-
... More
HT yard is provided with two gate entries, where one entry for EB side and another entry for consumer side. Each gate is fabricated using 2" GI pipe as outer frame with weldmesh with necessary support. Earthing the fencing by using no.8 SWG copper wire all around the fencing. Earthing of gate by using 25mmx3mm copper flat, filling the yard with 400mm jelly for a height of 0.50feet from ground level to make good. (Previous TS)
-
-
-
... More
Design manufacturing Supply, erection, testing, commissioning and handing over of 22kV 25kA HT Single panel outdoor vacuum Circuit Breakers Switch Board VCB Comprising one number 630A 25 kA VCB for outdoor installation each panel comprising 1. Draw out type 22 KV 630A 25 kA Horizontal Draw out / Horizontal isolation Vacuum Circuit Breaker with Motor (230V AC. – AC source of supply to be arranged purchaser) operated spring charged mechanism. Anti Pumping Device 110V DC shunt trip and closing coils (DC source of supply to be derived from a Power Pack suitable for 3 tripping and two closing operation counter, 4 no + 4 NC spare Aux, contact for customer use, automatic safety shutter, mechanical close / trip knob, mechanical on/off indication, operating hand, 110V AC – 110V DC Power Pack etc (Incoming 1 No 630A)
1
-
-
... More
2. 22KV / Root 3 / 110V /Root3 – Three phase, 3 Limb 200VA Class 1 Resin Cast Draw Out type Potential transformers complete with HT and LT HRC Fuses (Incoming – 1 No.)
3. Current Transformers of 100 – 50/5-5 Amps. Dual Core (Core 1 -15 VA class 1 for metering and core 2-15 VA 5P 10 for protection) for incoming 3 Nos, current transformers of 30/5-5 Amps dual core
-
-
-
... More
(Core 1-15VA Class 1 for metering and core 2 – 15VA 5P 10 for protection) for outgoing 2 Nos.
-
-
-
... More
4. Meters :Digital Ammeter with Selector Switch (Incoming 1 No. Outgoing 1 No.)
Digital Voltmeter with Selector Switch (Incoming 1 No.)
-
-
-
... More
Digital Trivector made of L&T / Secure make (Incoming 1 No)
-
-
-
... More
Digital power factor meter – 1 No.
-
-
-
... More
Digital Frequency Meter (Incoming 1 No.)
-
-
-
... More
5. Protection :
-
-
-
... More
TP ND IDMT 2 OC + 1 EF Relay with highest Instt elements similar like mega with type MCDG 61. (Incoming 1 No.)
-
-
-
... More
6. TP ND IDMT 2 OC + 1 EF Relay similar like Megawin type MCDG 31 Master trip replay Megawin MVAJH 13.
-
-
-
... More
7. Breaker ON/OFF Auto trip / Healthy trip / Spring charged indication
-
-
-
... More
8. Phase indicating Lamps R, Y and B (Incoming 3 Nos.)
-
-
-
... More
9. Control wiring
-
-
-
... More
10.630A Copper Bus Bar PVC sleeved and required panel copper earthing.
-
-
-
... More
11. Control Switch TNC
-
-
-
... More
12. Trip Circuit Healthy Push Button
-
-
-
... More
13. Common for Switch gear, MCB’s for AC DC Control Heater ON / OFF Switch with space heater and thermostat single phase switch socket, cubicle illumination lamp, Disconnecting type terminal Block etc. 14. MS sheet enclosure for Indoor Installation Powder Coated with paint shade Siemens Grey. Provision through Bottom entry to receive Incoming or outgoing cable excluding cable glands and cable terminal kit. (Make : System control /Mega win / Pentagon/ Equivalent) (DATA-1)
-
-
-
... More
Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Air conditioner with copper coil conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with rotary compressor operating on refrigerant non-CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with star rating of 3 star as per BEE specification and capable of performing the functions of
17
-
-
... More
Cooling
-
-
-
... More
Dehumidifying
-
-
-
... More
Air Circulating
-
-
-
... More
Filtering
-
-
-
... More
The installation works for the above split type AC units includes the following.
-
-
-
... More
1.Mounting / Fitting Indoor and outdoor units at their respective locations.
-
-
-
... More
2. Laying refrigerant pipeline of required length connecting not exceeding 3 metre distance and both units after drilling hole/holes in the wall if required.
-
-
-
... More
3. Insulating the suction pipe with expanded polyethylene foam 5mm tubing.
-
-
-
... More
4. Laying 25mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit.
-
-
-
... More
5. Leakage testing the entire system unit.
-
-
-
... More
6. Charging refrigerant gas in the unit.
-
-
-
... More
7. Suitable electric wiring to be provided with 2.5 Sq.mm PVC insulated copper wire between indoor and outdoor units up to 6 Mtrs length and up to switch within 3 Meters of location of indoor unit (Carrier/Bluestar/O General).(SR)
-
-
-
... More
Supply of 5 KVA Electronic Automatic Voltage Stabilizer V-GUARD make VGS 500 Model/Eq with Input Voltage range of 170Volt – 270 Volt and Output Voltage range 200Volts to 240 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration. (SR)
17
-
-
... More
Supply and fixing of angle Iron Frame work to rest the Outdoor unit. (SR).
17
-
-
... More
Supply and laying of 5/8" and 3/8" copper refrigerant pipe of 0.8mm thick with 2.5sqmm 3 core chord between indoor and outdoor unit. (Extra beyond 3 mts/AC unit) (SR).
68
-
-
... More
Supply, installation, testing and commissioning and handing over the following Capacity Aircooled self contained Ceiling suspended Ductable Air conditioner (carrier / Toshibha make /Eq)
-
-
-
... More
5.5 TR
3
-
-
... More
8.5 TR
2
-
-
... More
Supply and filling of R-410A Refrigerant gas
80
-
-
... More
Supply and Fabrication and fixing of MS Channel for Mounting the Air conditioner outdoor Unit
9
-
-
... More
Supply and Fabrication and fixing of MS Channel for Mounting the Air conditioner Indoor Unit
5
-
-
... More
supply and fixing of flexible canvas connection
13
-
-
... More
Supply and laying of 28.60mm Hard Drawn Copper refrigerant pipe by brazing connection.
100
-
-
... More
Supply and laying of 15.9mm Hard Drawn Copper refrigerant pipe by brazing connection.
40
-
-
... More
Supply and laying of 22.2mm Hard Drawn Copper refrigerant pipe by brazing connection.
45
-
-
... More
Supply and laying of 12.7mm Hard Drawn Copper refrigerant pipe by brazing connection.
105
-
-
... More
Supply and fixing of water drain pipe line (1” PVC Pipe)
135
-
-
... More
supply ,fabrication and erection of fabricated duct made up of GI Sheets of 22Gauge thickness
180
-
-
... More
supply ,fabrication and erection of fabricated duct made up of GI Sheets of 24Gauge thickness
505
-
-
... More
supply and fixing of extruded aluminium powder coated supply and return air grilles /diffuser with MS volume control damper
18.25
-
-
... More
Supply of extruded aluminium powder coated Gravity Louvers
9
-
-
... More
Supply and fixing of fresh Air louver made of extruded aluminium with bird screen provided with intake louvers
9
-
-
... More
Supply and Providing Acoustic For intial portion of ducting with 12mm thick fibre Glass Rigid Board Covered with tissue paper and aluminum Perforated Sheet
180
-
-
... More
supply and providing thermal insulation of 9mm thick vidoflex with aluminium foil
505
-
-
... More
Supply and run of 2.5 Sq.mm 7 core PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 (Havells /Eq) (for indoor to outdoor unit control cable).
95
-
-
... More
Supply and providing of pipeline nitrle rubber insulation for Refrigerant and drain pipe lines.
280
-
-
... More
Supply and run of 10 Sq.mm 4core PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 (Havells /Eq) (for indoor to outdoor unit control cable).
90
-
-
... More
Unit Lifting, shifting, positioning charges for outdoor unit
5
-
-
... More
DX AIR COOLED CONDENSING UNITS: Design, supply , installation, testing and commissioning of 11TR Nominal capacity DX Air-cooled Condensing unit fixed with energy efficient R410A Refriant scroll compressor along with grooved copper tube/aluminium fins air cooled condensor coil with anticorrosion coatings,liquid ,accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powdercoated as per specification .the unit to include built in safety controls like HP/LP switch power quality protector ,in built thermal / temperature protection .(carrier)
4
-
-
... More
Supply ,installation , testing and commissioning of 11 TR Nominal capacity 1 circut of 11TR factory assembled double skin Floor mounded AHU with 50mm-45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/forward curved centrifugal fan with EFF1 rating motor ,drive arrangement with taper lock pulleys for fan and motor ,vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 mic, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins ,GI mist arrestor ,condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for inspection door ,out let damper of aerofoil blades &PVC gears ,and flexible fire retardant canvass complete with galvanized hardware . each of the cooling coils will have independent distributers ,electronic expansion valve kit ,catch all drier, independent DX coil circuit to connectivity to each ODU circuit.
4
-
-
... More
Supply and installation of fabricated GI plenum for HEPA filter . Necessary access door shall be provided with air tight locking arrangements .the supply air plenum shall be made out GI frame work and frame arranements for micro filter and HEPA filter section
4
-
-
... More
supply ,fabrication and fixing of suitable MS angle
support frame for AHU Unit for Operation theater
4
-
-
... More
Supply and installation of control panel for AHU & OUTDOOR UNIT/Suitable DOL starter with 18A powercontactor, OLR, Single Phase Preventer, Indication Lamp and Push Button, RYB Indication Lamp, 32A TPN MCB, Auto/ Manual Selector Switch, Wall mounting panel in Siemens Gray powder coated
4
-
-
... More
supply and fixing of high efficeincy particulate Air (HEPA)filter of size 600x600mm with 99.97% optical efficiency at micron with following specification : filter size :600x600 classification:h-13 construction: panel type efficiency :99.97% optical efficiency at 3 micron; media :micro glass fiber paper spacers: Aluminium initial pressure drop :25 mm Final pressure drop :75 mm duct holding capacity :4750gm/sq.mtr framing :aluminium (Box type) no of pleats:72 ; filtration Area:26.8sq.mtr; face Area:372 sq.mtr washable:No pleating process: machine plasted suitable for 11.0 TR (Quotation)
4
-
-
... More
Supply and run of 2.5 Sq.mm 3 core PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 (Havells /Eq) (for indoor to outdoor unit control cable).
14
-
-
... More
Supply and fixing of AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories (SR)
7
-
-
... More
Supply and laying of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to relevant IS (1set -5 nos) (SR)
2
-
-
... More
Supply and fixing of First Aid Box complete with all First Aid Medicines (SR)
4
-
-
... More
Supply and fixing of Shock Treatment Chart fixed in glass frame (SR)
2
-
-
... More
Supply and fixing of 4 Nos. Fire Buckets made out of 40x40x6mm MS Angle (SR)
4
-
-
... More
Supply and demonstration of Hand Gloves 11KV Grade (SR)
2
-
-
... More
Supply and fixing of Danger Board as required by the Electrical Authorities (SR)
2
-
-
... More
Supply and fixing of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms (SR)
8
-
-
... More
Supply and handing over of Earth Discharge Rod (SR)
1
-
-
... More
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for
earth connection. (SD-77)
55
-
-
... More
Supply and erection of 7.5 kVA three Phase in Single phase out Pure sinewave UPS of Microcontroller based High frequency and Double Conversion Online Technology with inbuilt isolation transformer system, LCD/ LED Display with suitable SMF battery to provide minimum 1 hour backup time for full load condition along with Powder coated MS Rack and interlink cables. with connections complete
4
-
-
... More
The Technical specifications of the inverter shall be as follows.
1)Capacity 7500VA pure sinewave UPS. Input voltage range 415V to 440V AC three phase. Output Voltage 230V AC Single phase. Backup time 1 Hour. 2)2. Voltage THD (Linear Load) : ≤2%
3. Voltage THD (Non-Linear Load) : ≤4%
4. Current THD : 10%
5. Overload : 110%, 30s turn to Bypass mode; 150% instant turn to Bypass mode
6. Short Circuit protection : 5 cycles turn off inverter, no transfer to Bypass, provide Alarm (AC mode) ; 5cycles turn off inverter, provide Alarm (Battery mode), Input fuse blown or breaker action
-
-
-
... More
7. Waveform : Pure sinewave
8. Transfer time : (AC mode to Battery mode - Zero) (Inverter to bypass - 4ms)
9. Efficiency : 85% to 92%
10. Noise Level : less than 50dBA @ 1meter (with fan speed control)
11. Warranty : Two years on Electronics & one year on battery.
(consol /Numeric/ Fuji make / Eq), (Battery make : Exide) (SR)
-
-
-
... More
Supply and fixing of 80W LED Surround Neo(T) Eco round High bay Industrial fitting of IP66 rating (Crompton make TIP-320-80-57-SL-GL-NSG) in PDC housing with efficacy of 110lm/W with suitable special type of MS clamps with PVC unsheathed copper leads from terminals to the fitting.(Previous TS)
8
-
-
... More
Supply and fixing of 630A TPN Switch Disconnector Fuse Units in Sheet Steel Enclosure with HRC fuses Double Break with MS cable entry boxes in suitable angle iron frame work and necessary connections complete.
1
-
-
... More
Preparation of Site plan, physical layout electrical schematic diagram (6 Sets) getting drawing approval from CEIG, preparation of completion report rectification report etc. arranging CEIG inspection, paying CEIG inspection fees, obtaining safety certificate from CEIG and preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in panel room.
1
-
-
... More
GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements