Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Nov 2024
Closing Date13 Dec 2024
Tender Amount₹ 2,54,69,821
Costs
EMD
₹ 1,38,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_505579_2Tender No
NIT21 2024 25 B C M CIRCLE ERODE Dated 18 11 2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
93
-
-
Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling M-Sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
290
-
-
Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, Without consolidation etc. complete complying with standard specification and as directed by the departmental officers.
236
-
-
Brick work in Cement Mortar 1:6 (One Cement and Six M-Sand) using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).
-
-
-
For Foundation and Basement
47.5
-
-
For Superstructure in Ground Floor
71
-
-
For Superstructure in First Floor
73
-
-
For Superstructure in Second Floor
88
-
-
For Superstructure in Third Floor
14.5
-
-
Brick work in Cement Mortar 1:5 (One Cement and Five M-Sand) using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).
-
-
-
For foundation & basement
59
-
-
Damp proof course with Cement Mortar 1:4 (One Cement and Four M-sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.
77
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
209
-
-
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
1523
-
-
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
736
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
114
-
-
Providing and laying in position, Standarised concrete Mix M-20 grade in accordance with IS:456 - 2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum water cement content of 325kg/m3 and maximum water cement ratio of 0.55, including admixture (Plasticiser/Super plasticiser) fosroc (or)equivalent in recommended proportions as per IS 9103to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cum) 7730kg of 20mm machine curshed stone jelly and with about (3.3cum) 5156 of 10 - 12mm machine curshed stone jelly and with about (4,79 cu.m) 7670kg of sand but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanica vibrators, finishing curing etc, and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra etc, complete. complying with standard specification and as directed by the departmental officers. The coarse and the fine aggregates to be used should comply with the requirements of IS standards (No separate payment will be made by the department for the excess usage of materials
-
-
-
For Foundation and Basement
80
-
-
For Superstructure in Ground Floor
82
-
-
For Superstructure in First Floor
69
-
-
For Superstructure in Second Floor
72
-
-
For Superstructure in Third Floor
7.5
-
-
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two M-sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in cub boards, record racks, platforms in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.
-
-
-
50 mm thick slab.
9.5
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
414.5
-
-
Cement Concrete 1:5:10 (One cement, Five M-sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
33
-
-
Brick partition walls of 11.00cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three M-Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
11.00 cm thick For superstructure in Ground Floor
108
-
-
11.00 cm thick For superstructure in First Floor
21
-
-
11.00 cm thick For superstructure in Second Floor
21
-
-
Paving the floor with best approved quality fine polished Kota stone slabs of size below 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
903
-
-
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 10mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M-sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
34
-
-
Supplying and laying of Rubber moulded Hydraulic pressed paver block 63mm thk. over a base layer of M-Sand filling incl. Cost of materials laying and Labour charges etc., complete complying with standard specification. and as directed by the Department Officers.
962
-
-
Providing granolithic floor finish of the 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two M-Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
95
-
-
Supplying and fixing fine polished cuddapah slab of 38 / 40mm thick thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
26
-
-
Providing Single Nosing to the Kota stone slab and finishing the edges Smoothly. The rate is inclusive of Labour charges and hire charges for polishing machine, Polishing blade etc., Complete Complying with Standard Specifications and as directed by the departmental officers.
163.5
-
-
Providing Double Nosing to the fine Cuddapah slab of approved quality and best variety complete complying with standard specification
58
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
-
-
-
For second floor
25
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 16-18mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M-Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
316
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.(110MM DIA)
-
-
-
110 mm dia/Three floor
92
-
-
110 mm dia/Four floor
15
-
-
Supplying and fixing in position steel balustrades using 20mm square rods spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails (cost of hand rail shall be measured and paid separately) by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm provided at the bottom of hand rail; the bottom of balustrades shall be fixed on to the top of step concrete. An additional MS flat of size 50mm x 6mm shall be provided at the centre of balustrades connecting all square rods to the entire length including cost of square rods, flat and applying one coat of red oxide primer to the iron surfaces, etc., complete complying with standard specification and as directed by the departmental officers.
37.5
-
-
Supplying and fixing 40mm dia GI pipe for staircase hand rail including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers
33
-
-
Supplying and fixing GI pipe handrails for handicapped persons using 50mm dia GI pipe double handrail at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre as shown in CA Job No. 9123 / 1 including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers
13.5
-
-
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
-
-
-
Double leaf
30.3
-
-
Single leaf
2.1
-
-
Fabricating, Supplying and fixng in position of steel windows (Four Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle.
63.2
-
-
Fabricating, supplying and fixing of steel Emergency exitdoor cum, emergency window with the following specification. M.S. angle in size 40x40x6mm are used for the outer frames and M.S. angle of sie 35x35x5mm for the shutter frame, stiffners with 32x6mm M.S. flats provided at required intervals in the shutter frames 18 guage CR sheet is laid as panel and welded instant for 1/3 bottom portion of the shutter, M.S. flat 18x5mm is welded over the 32x6mm M.S flat sandwitching the CR sheet in between additional stiffner with 18x5mm M.S. flat is provided diagonally at the rear-side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 15kg/m2 and the top portion of operation emergency window is to be made of 25x25x3mm M.S. angle welded intact with CR sheet and 25x3mm M.S. flat at diagonally at the near side of the window at required interwals 6 Nos. of hinges to be provided,6 Nos of holdfast 100mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2 Nos. one at top and the other at the bottom are to be provided one aldrop is provided at an appropriate place in the door 2 Nos. of 'D' type handle for emergency window and 2 Nos of handle for door is to be provided at appropriate places. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of materials, labour transportation to side of works, loading, unloading and all other incidental charges etc., complete.
30.3
-
-
Manufacturing, supplying and fixing of Entrance Double leaf steel Door size 1.5 X 2.1M with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sand witching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m and 6 Nos hinges for double leaves shutter to be provided 6nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all meterials, labour charges,taxes, transportation to site of work , loading, unloading and all other incidental charges etc.,complete.
3.2
-
-
Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed
48
-
-
Supplying, and fixing M.S. GRILLS for open courtyard grill, grill work to doors, windows and ventilators etc, using necessary flats for inner and outer members which should be fixed or welded to masonry or column including necessary dismantling or making holes and redoing the same to original condition as directed by the departmenta officers inclusive of cost of providing one coat of best quality red oxide primer completre complying with standard specifications.
8232
-
-
Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers
3364
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
852
-
-
Stucco plastering 12mm thick using blue granite chips of size 10mm and below over the existing base plastering with cement mortar 1:5, (One Cement and Three P-Sand) 12mm thick, etc., complete complying with standard specifications (SI 314)
96
-
-
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P-sand), 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement and with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
71
-
-
Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be throughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for 48 hrs. It shall then be sand papered to give a smooth and even surface. Any unevenness shall be made good by onr coat of wall putty mixed with water on entire surface incluidng filling up the undulations and applying 2 nd coat of putty after 6 hours of 1 st coat of putty and then sand papering the same after it is dry and finishing the surface smoothly, etc completed complying with standard specification and as directed by the departmental officers .( The rates are inclusive of hire charges for grinding machine with wheel , cost of sand paper , cost of putty blade , labour charges for grinding the joints and sand papering, two coats of putty , scrapping the putty area to level the surface smooth , etc complete). The putty should be get approved by Executive Engineer before use on work.
956
-
-
Supplying and fixing of Napkin Incinerator for Girls Toilets including cost of conveyance and fixing charges etc., complete as directed by the depatmental officers.
2
-
-
Painting two coats of newly plastered wall surface with ready mixed Plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
3104
-
-
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
2070
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) 2 HP Monoblock
1141
-
-
Supplying and erecting of 2 HP-Jet Pump Set, including erection with necessary accessories etc., complete as per standard specification and as directed by the departmental officers.
1
-
-
Providing Blackboard in two layers with first layer in cement mortar 1:5 (one cement and five P-sand)20mm thick including Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) and the second layer in Combination mortar 1:1:6(one cement one lime and six p- sand) 20mm thick and providing band all round the block board in c.m 1:5 (one cement and M- sand) for 20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying with standard specification.
56.5
-
-
Supplying and Fixing of Aluminium Dye Cast letters of following size to suit the Architectural elevation drawings given for the including Cost ,conveyance and all other materials and Labours involved etc., complete and as directed by the Department Officers.
-
-
-
Aluminium Dyecast letters 9" size
31
-
-
Aluminium Dyecast letters 6" size
40
-
-
Manufacturing supplying and fixing in Position of the Tamilnadu Government Emblem of dia 15" made upto 12mm thickness sheet including, Computer designing, drawing, pattern making, moulding, grinding, painting, the emblem etc., complete as directed by the dpartment officers.
-
-
-
Supplying and Fixing of 15" size emblem(Brass) of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process etc., complete and as directed by the departmental officers
1
-
-
Providing Anti-Termite Treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 part I to IV in stages to suit the progress of work consist as per the detailed specification as below (Measurements taken for the plinth area for the purpose of payment) including braking of termit mounds, making holes with crow ar, closing the holes after the treatement and including cost of chemicals, labour charges transport and storing etc., complete (The chemical should be got approved by the Executive Engineer before use on works)
Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete in bottom and sides of foundation.
Stage-2: Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth.
Stage-3Spraying anti-termite chemical solution on the sand for the flooring before laying the flooring concrete. This treatment has to be carried out on the sand filling by making holes with crow bar to a depth of 60 cms and at 60cms intervals on both.
Stage-4:Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment.
295
-
-
Supplying, laying and jointing UPVC pipes (Un-plasticized polyvinyl chloride) UPVC used for (Commercial applications), water pressure in residencial areas do not normally exceed the maximum tolerance (schedule - 80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
40 mm dia UPVC pipe Below Ground Level External water supply
80
-
-
Supplying, laying and jointing UPVC pipes (Un-plasticized polyvinyl chloride) UPVC used for (Commercial applications), water pressure in residencial areas do not normally exceed the maximum tolerance (schedule - 80) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level External water supply)
-
-
-
25 mm dia UPVC pipe
20
-
-
32 mm dia UPVC pipe
10
-
-
40 mm dia UPVC pipe
10
-
-
Supplying and fixing in position of the following UPVC SPECIALS(Heavy type) of approved quality and good variety excluding the fixing charges but including necessary cutting and threading of UPVC pipes for jointing the UPVC specials and providing two coats of painting with good quality and approved variety of synthetic enamel paint in the case of pipe line above ground level and one coat of tarring in the case of pipe line below ground level etc., complete.
-
-
-
25 mm Dia UPVC Elbow
10
-
-
32 mm Dia UPVC Elbow
4
-
-
40 mm Dia UPVC Elbow
3
-
-
25 mm Dia UPVC TEE
8
-
-
32 mm Dia UPVC TEE
4
-
-
40 mm Dia UPVC TEE
3
-
-
25 mm Dia UPVC Coupling
6
-
-
32 mm Dia UPVC Coupling
6
-
-
40 mm Dia UPVC Coupling
6
-
-
25 mm Dia UPVC Union
3
-
-
32 mm Dia UPVC Union
4
-
-
40 mm Dia UPVC Union
5
-
-
32x25 mm UPVC Reducer
2
-
-
25x20 mm UPVC Reducer
5
-
-
20x15 mm UPVC Reducer
4
-
-
25 mm dia UPVC HEX NIPPLE
6
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
40 mm dia G.M. Wheel Valve
1
-
-
32 mm dia G.M. Wheel Valve
1
-
-
Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications
1
-
-
Drilling of borewell anywhere in Tamilnadu including transporation from one place to another place with in Tamilnadu in alluvival soil or sedimentary strata of clay and sand or sand, stone, shale pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm direct or reverse rotatry mud and circulation method using rotary rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD officers including construction of mud pit using Rotary Rig are to be used.
-
-
-
0 to 150m
150
-
-
151m to 180m
30
-
-
181m to210m
30
-
-
211m to240m
30
-
-
241m to 270m
30
-
-
271m to 300m
30
-
-
Supplying and delivery of PVC Casing pipe as per IS 12818/1992 with ISI Marking of 6" diameter in 3m length with screwed and socket end and centering guides for every 15m length of pipe to suit deep bore wells for delivery including loading, unloading, freight, insurance etc., complete (Rate inclusive of Excise duty)
18
-
-
Supplying and fixing of suitable PVC end cap (6Kg/cm2) for 6" dia bore well of best quality with ISI mark. (The PVC end cap should be got approved by the departmental officers before execution)
1
-
-
Supply of 4.00 sqmm PVC insulated and sheathed three core flat type Copper Cable conforming to IS 694/1990 for submersible motor having good quality with ISI mark etc., complete complying with standard specification.
285
-
-
Supplying, fixing and jointing in UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure for submergible pump etc., complete.(Schedule-40)
260
-
-
Supplying of best and approved quality of Nylon rope of the following size including laying in the bore well and tying with copper wire it etc commplete complying with standard specification.
265
-
-
Supplying and erecting of Three phase 5.00 HP wet submersible pumpset suitable for 150mm dia borewell as per IS 8034/2002 without panel board of best approved quality with ISI mark including all accessories.The rate including fixing and jointing submersible cable with wire into the starter to the required depth and also fixing of riser pipes to the required depth values erection charges pressure gauge upto the exterior walls pump room and laying and jointing the cable and twin earthing as per IE rules etc., and testing the pumpset and trail run for 10 days etc., complete complying with standard specification and as directed by the departmental officers.
1
-
-
Supplying and fixing of three phase panel board -D.O.L with two level guard and auto start confirming to IS 13947 and IEC 947 suitable KW rating for operation in AC and including Ammeter,voltmeter,Thermal overload relay,Indicator lamp,starting capacitorctor sh button switchespu, running capcitor and On/Off 16Amps 2 pole Magnetic contactor with under Voltage proptection, I ps operation in AC including standard specification with TPICN switches, three pilot lamps capacitor single phasing preventor, water level guar d and laying and jointing the cables and twin earthing as per IE rulesetc, complete complying with standard specification.
1
-
-
Supplying and fixing PVC Water Tank of approved quality conforming to ISI Specification 1000 litres capacity having suitable cover, bolts indlucing cost of tank, taxes, transportation to work spot, fixing in position a place as shown and directed by the departmental officers inlcuding conducting required water test complete complying with standard specification.
2
-
-
Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST ? EQUIVALENT.
6
-
-
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST ? EQUIVALENT.
6
-
-
GST 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%