Public Works Department Tender

Renewing the damaged PVC Sliding Door with Roller using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Repairing the window and refixing the same in position with necessary screws, hook and handle after attending to petty repairs etc., complete complying with standard specification.

Renewing the damaged New Netlon Masquitoe Net of approved quality and approved brand for the following specification. The Windows frame alround portion are fixed with 25x12mm thick teak wood ordinary beading with necessary screws nails etc., The window frame top portion are fixed with Fibre netlon mosquitoe net with necessary stiffness for easily open and close and easily to wash for longer lift of the net to preventthe entrance of mosquitoes, flies and other insects in to office and wards etc., The rate is inclusive of cost materials, labours, etc., complete as directed. The quality of materials are approved by the Executive Engineer before starting of work.

Renewing and refixing for steel windows fixing MS steel sheet cutting and welding, transportation including labour charges for fixing furniture fittings complying with standard specifications.

Renewing and refixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Renewing and refixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works).

Renewing and refixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.

110mm dia PVC Pipe

75mm dia PVC Pipe

Sub Total Amount for above all items (excluding GST)

GST 18% for above SubTotal Amount