Public Works Department Tender

Fabricating Supplying and fixing in position of Aluminium anodised powder coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.With automatic door closure

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World HealthOrganisation (WHO) Standards with following accessories.(a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel ControlSystem with necessary Stainless Valves and Fittingsand Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact etc., complete complying with standard specification and as directed by the departmental officers 250 Litres

Supplying and fixing of 450mm x 300mm x 200mm Stainless Steel Sink The rate is inclusive of all materials ,labour charges ,transportation ,loading ,unloading and all other incidental charges etc complete.and as directed by the departmental officers

Supplying and fixing of 600mm x 450mm x 200mm Stainless Steel Sink The rate is inclusive of all materials ,labour charges ,transportation ,loading ,unloading and all other incidental charges etc complete.and as directed by the departmental officers

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing PVC water tank of approved by quality conforming to ISI specification 500 litres capacity having suitable cover, bolt including cost of tab, taxes, transportation to work spot, fixing in position a place as shown and directed by the departmental officers including conducting required water test complete complying with standard specification.

Supplying and fixing of Premium quality Window roller blinds. The cost includes all materials, transportation to site and fixing charges etc., complete. The make and brand should be got approved by the Executive engineer before use on site and as directed by the departmental officers

Supplying and Fixing of Special type Stainless steel Towel rack .The cost includes cost of materials cost of material, fixing,power consumption for fixing, conveyance and supplied at work site etc., complete.The make and brand should be got approved by the Executive engineer before use on site and as directed by the departmental officers

Supplying and Fixing of Shower Set including Concealed Body for Single elever High flow divider and its exposed part, Bath tub spoutt, Flexible Tube, Wall Bracket, Overhead Shower,Shower Arm, hand Shower.The cost includes cost of materials cost of material, fixing,power consumption for fixing, conveyance and supplied at work site etc., complete.The make and brand should be got approved by the Executive engineer before use on site and as directed by the departmental officers

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make like Kohler with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., excluding flushing tank etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make like jaguvar with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing of concealed tank of European water closet of make like gebrit with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.The rate is inclusive of material,fixing charges,transportation and dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works).

Supplying and fixing in position best quality make Table top wash hand basin including fixing of wash basin on to the top slab including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works).

Supplying and fixing of Stainless steel Health Faucet with chrome finish metal hose and holder including angle valve,stop cock with angle flange of chrome finish.The rate includes cost of material,fixing charges,transportation and incidental charges if any etc complete. (The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works).

Supplying and fixing of touch Sensor type LED Mirror etc complete . (The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works).

Supplying and fixing of Floor Drain of size 62.5x10x8.4cm as directed by the departmental officers. (The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works).

Supplying and fixing of customised Decorative teak wood panelling for entrance door for elevation.The panel should be fixed to the wall with necessary anticorrosive screws for fixidity. The door frame should be finished with high quality PU polish. The rate is inclusive of cost of all materials, Labour charge, conveyance of material to site, Tools and Plants, scaffolding charges involved in the works, Power consumption charges, painting charge and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers.(The material quality, brand, colour, shade and shape should be got approved by the Executive Engineer and competent authority before use on works). (Special Work)

Supplying and fixing of Roll of Honour Board .The rate is inclusive of material,fixing,polishing and writing the names of required size etc as directed by the departmental officers.

Supplying and planting of Fox Tail Tree.The rate is inclusive of cost of plant,earthwork,planting the trees in required position and filling with required quantity of red gravel etc as directed by the departmental officers.

Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with in built 3mm sound block class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copy of plank size 1288 x 196 x 8mm having joints tongue and groove secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affineincluding laying 0.20mm thick alkali resistant polyethylene sheet of density 850kg /m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc complete

Supplying,fabricating,assembling and fixing in position Toughened Glass Partition with the following specification:The Fully glazed partition is to be fixed on the wall on the either side and on to the RCC Floor slab at top and bottom.The partition should be fabricated with 12mm thick toughened glassand fixed to RCC floor and slab using SS fittings.All PAtch fittings are made of SS 304 grade and are to be placed at suitable locations as directed by the departmental officers etc complete so that the partition assembly should be stable.The rate includes cost of all materials,labours for fabrication and fixing,transportation etc complete

Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giviing neat finish. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmental Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Supplying and fixing of TV Unit of size 3.06m x 2.64m made of 19mm thick plywood sheet finished with 4mm thick OST sheet and will be fixed with necessary screws and fevicol giving neat finish The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmental Officers. The water proof ply wood and 4mm thick sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Supplying and fixing of wardrobes with Shutter arrangements of size 9.75m x 0.61m of height 0.81m using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the wardrobe and shutter and 1mm thick fixed in the outside of the wardrobe and shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Supplying and fixing of backdrop arrangements of size 2.78m x 3.71m of specified design with 19mm plywood finished with OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finish.The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmental Officers. The water proof ply wood and 4mm thick sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Supplying and fixing of cabinet with Shutter arrangements using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the wardrobe and shutter and 1mm thick fixed in the outside of the wardrobe and shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Supplying and fixing of Strong Room Door for District Treasury with following specification:External Dimension (Height 2.128m x width 1.25m) Door Dimension (Height 1.953 m x width 0.91m) Outer Opening (Right Hinges) ,Thickness of the Door is 182mm ,12 Shooting bolts each of 38mm diameter in front and rear to secure the door,Grill gate is secured with high-precision 8-lever lock ,A relay micro switch provided inside to control the lighting inside the vault, Door Swing is 1060mm, Grill gate swing is 985mm, Total Weight - 965 Kilograms,Locks and relocking devices are protected by specially designed drill defeat shield, Automatic re-locking device deadlocks the door incase of explosive or mechanical attacks, Additional re-locking device on primary lock for extra protection Resistant against fire, power drilling, oxy acetylene torch and arc cutting etc complete complying with standard specification and as directed by the departmental officers.The rate inclusive of labour,transportation , fixing and other incidental charges etc complete.

Supplying and fixing of Termite Proof / Water Proof Plywood 19mm thick etc., complete complying with standard specification and as directed by the departmental officers

EARTH WORK OPEN EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound with an initial lead of 10m and lift of 2m in places shown by the departmental officers and clearing, levelling the site etc.,with initial lead and lift etc., complete complying with standard specifications.

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and laying TAMIN paver blocks of 60mm thick, the cost include base cushion of 10cm depth transporting charges etc. complete complying with std. specification and as directed by the departmental officers.

GST 18 %