Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Dec 2023
Closing Date9 Jan 2024
Tender Amount₹ 18,22,00,000
Costs
EMD
₹ 9,21,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PWD_397754_1Bid Award Id
ViewTender No
23/01/2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Pre- Qualification Conditions
BOQ Items
Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
757
-
-
Supplying and filling in foundation and basement with Filling Gravel in layers of not more than 15cm.thick well watered and rammed and consolidation etc., complete complying with standard specification and directed by the departmental officers.
836
-
-
Cement concrete 1:5:10 (One cement, five crushed stone sand and ten aggregate) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15cm thick, well rammed, consolidated and using etc., complete complying with standard specification
181
-
-
Cement Concrete 1:5:10 (One cement, Five M.sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers
185.5
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
2707
-
-
Supplying and Erecting, Steel Centering for sides and soffits including supports and strutting upto 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90cmX60cm and BG 10 gauge stiffened with welded mild steel angles of size 25mmX25mmX3mm for boarding laid over silver oak joists of size 10cmX6.50cm spaced at about 90cm centre to centre and supported by Casurina props of 10cm to 13cm dia spaced at not less than 75cm centre to centre at sutiable intervals etc., complete in all floors as directed by the departmental officers complying with standard specifications. The payment for centering shall be made only after the concrete laid. The retrieved materials should be taken back by the contractor.-
-
-
-
Plane surfaces such as RCC floor slab, roof slab, rectangular, square, Tee or Ell beam, lintels, bed blocks staircase waist slab, landing slab, landing beams, portico beams, portico slab etc.,
7588.5
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
1525
-
-
Plane surface such as RCC square or rectangular columns, top and bottom slab of sunshade, boxing sill slabs, etc.,
2748.5
-
-
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
4010
-
-
Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of M.sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
Foundation and basement
645
-
-
Super Structure in Ground Floor
395
-
-
Super Structure in First Floor
381
-
-
Super Structure in Second Floor
382
-
-
Super Structure in Third Floor
76
-
-
Providing and laying in position, standardised concrete Mix M.20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
Foundation and basement
453
-
-
Super Structure in Ground Floor
45
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.-
-
-
-
Super Structure in First Floor
13.5
-
-
Super Structure in Second Floor
120
-
-
Supplying, fabricating and placing in position Mild steel or Ribbed tor steel in all size for all RCC works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specifications. (The contratctor will have to make his own arrangements for the supply of MS plain rod / RTS rod and binding wire)
3438
-
-
Supplying and fixing in position best approved ISI quality PVC Rainwater Downfall pipes having working pressure of 4kg/cm2 including cost of PVC pipe, with necessary shoes, bends, nails, teakwood plugs, screws etc, and fixing of cast iron gratings of required dia metre and special clamps at junction of parapet and the RCC roof slab including finshing neatly etc., complete. The rate shall be inclusive of cost of removable cast iron gratings. The size of teak wood plugs to be used shall be 150mm x 25mm in front and 200mm x 75mm in rear and all other sides to a depth of 100mm. The PVC pipe shall be fixed with teakwood plugs by means of "U" Clamps using brass screws. Special types of "U" clamp at the centre of the pipeline shall be fixed in addition to those for more than 3 metre pipe length complying with standard specifications.
-
-
-
One floor - 110mm dia
22.5
-
-
Two floor - 160mm dia
230
-
-
Brickwork in cement mortar 1:5 (One cement and five crushed stone sand) using best quality IInd class ground moulded chamber burnt bricks of size 9”x4⅜”x2¾“ for the following including curing etc., complete complying with standard specifications.
-
-
-
For foundation and basement
280
-
-
Super Structure in Ground Floor
12
-
-
Brickwork in cement mortar 1:6 (One cement and Six crushed stone sand) using best quality IInd class ground moulded chamber burnt bricks of size 9”x4⅜”x2¾“ for the following including curing etc., complete complying with standard specifications.
-
-
-
Super Structure in Ground Floor
363
-
-
Super Structure in First Floor
299
-
-
Super Structure in Second Floor
275
-
-
Super Structure in Third Floor
130
-
-
Brick partition wall using best quality IInd class Ground moulded chamber burnt bricks of size 9”x4⅜”x2¾“ in Cement Mortar 1:3 - One Cement and three Crushed stone sand - including supplying and fxing hoop iron reinforcencement if considered necessary by the departmetal officers as directed etc., complete complying with standard specifications (The hoop reinforcement will be mesured & paid separately)
-
-
-
For Super Structure in Ground Floor in 11.50cm thickness.
80
-
-
For Super Structure in First Floor in 11.50cm thickness.
205
-
-
For Super Structure in Second Floor in 11.50cm thickness.
155
-
-
Damp proof course with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.
241
-
-
Plastering with Cement Mortar 1:5 (One cement and Five P.sand), 12mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
6760
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P.Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
10468.5
-
-
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three P.sand), 12mm thick mixed with water proofing compound to BIS at 2% by weight of cement with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
424
-
-
Providing Polymer Coating (Water Proof Coating) for sunken Portion of toilet with following specification and the surface shall be cleaned to remove all dust, foreign, matters lose materials or any other deposits of contamination by rubbing with wire brush.
Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred throughly until no bubbles remain in the mix. Any lumps found in mix shall be removed.
Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.
220
-
-
Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification.
420
-
-
Supplying and fixing solid core particle board flush shutter (Single Leaf Size 1.00mx2.10m) of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300x12mm aluminium tower bolt 1nos. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
115
-
-
Supplying and fixing solid core particle board flush shutter (Double Leaf of Size 1.50x2.40m) of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 300x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
75
-
-
Supply & fixing of WPC (Wood Polymer Composite) Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter and the design is as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.
105
-
-
Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-Charge of the department.
The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4” in SS.(Sliding door)
3
-
-
Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor pring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers
25.5
-
-
Providing and fixing of 1.2mm thick Lead Lining Door for X-Ray Rooms, Scanning Rooms with Mild Steel Door Frames 105mm x 57mm X 18 G and 12 G x 50mm Shutter made of GI with PWG finish and honey wool insulations with SS 101mm x 75mm x 3mm SS 304 Ball Bearings Butt Hinges, Mortice Sash Lock ML 100A,
50mm BS, 85mm centre, CL 207 : Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make), Heavy Duty Door Closer, Frames fixed wih walls using Mortice Sash Lock ML 100A, 50mm BS, 85mm centre
CL207: Key & Knob 70mm, 5 Pin Cylinder with Handle SS Finish (Dorma Make) all neccesary accessories and fittings as per the required and as per the approval for the Department Officer
6.5
-
-
Supplying,fabricating and fixing in position UPVC frame with SS mesh with Shutter arrangements to the sizes 30mmx13mmwire of 0.27 kg/m2 with necessary accessories such as best quality runner, lock, including cost of all materials, labour power consumption required for fabrication drilling holes in necessary wall where ever necessary with power drills and made same to original condition after fixing.
370
-
-
Supplying and fixing following Ornamental Burma Teakwood entrance door as per the drawings and designs approved by the departmental officers. The outer frame of the door is 150mmx125mm teakwood. The main door shutter opening size is 3.00mx3.00m.The main door should be double leaves and each door shutter fully panelled.The door shutter outer frame of size 150mmx50mm teakwood. The door panells shall be of 50mm thick teakwood planks with ornamental designs approved by the Executive Engineer. The Lock rail shall be of 200x50mm tk teakwood. The top of the door to a height of 900mm finished with fixed glazing of approved pattern using 12mm thick toughened glass with MS grill. the sides of the door shall be fixed glazing of size 900mmx3900mm finished with 12mm thick toughened designed glass. All the door frames and fixed glazing frames are made out of 150mmx125mm teakwood of best quality. The door frames and shutters shall be given two coats of best approved quality melamine finish. The rate inclusive of cost of approved quality teakwood, 12mm thick designed toughened glass, brass hinges, brass tower bolts, brass aldrops, door stoppers, brass screws etc.,
15
-
-
The cost includes cost of material, labour charges, conveyance charges, fixing charges,designing charges and glass design charges, electricity charges and all other incidental charges., etc. All materials should be got approved by the Executive Engineer before use on works.
-
-
-
UPVC Window Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.
370
-
-
UPVC Ventilator Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
41.5
-
-
Supplying, fabricating and fixing in position of Aluminium With powder coating of any colours Mat finilsh Fixed Glazing the glass used shall be of 5 mm thickness. The Aluminium Section are to be anodised under electrically controlled condition as per IS 1868/1962 for an anodic film thickness of 15 microns. All the materials should be got approved by got approved by the Executive Engineer before execution of works.
5
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
96
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
345
-
-
Supplying and Fixing M.S grill to opening corridor sides, ladder Entrance gate and Name board angles etc., Using necessary M.S flat for inner members and outer members which should be fixed to window members frames as directed by departmental officers inclusive of cost of providing one coat of best quality red oxide primer. -The design of M.S. grill should be got approved from departmental officers before use on works.-
10165
-
-
Manufacturing supplying and fixing of steel door (Single leaf) with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door.
17
-
-
Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete
-
-
-
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM) Gear type operator operated
45
-
-
Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm set in Cement Mortar 1:2 (One Cement and Two m.sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
4770
-
-
Supplying and fixing of SS Wall Cladding
187
-
-
Supply and fixing of PVC wall Corner beading etc., complete
2330
-
-
Supplying, fabricating, erecting and fixing Hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level.
700
-
-
Supplying and laying polyester, washable and stainfree cloth (Bio-Active fabric washable germfreesuitable for dialysis room) curtain system with maximum curtain cloth height 230cm (top 30cm white colour net and 200cm light blue colour as per approval) stitching with stiffener tape, Pleats ironing and laying around each bed using sliding wheels to nylon rollers, nylon axil and tangle free nylon swivel stem with chrome plated steel hook, curtain track should be supported in roof using 20x20mm, 2mm thick sized aluminium tubes same spec with end caps in two sides using all necessary fittings. as per the direction of engineer in charge including conveyance to site laying in line and level sealing all cutting in false ceilling with
840
-
-
powder coated MS cup all leads and lifts including all labour charges etc. complete (unpleated length of the cloth measurement will be considered for payment also the bottom and top folding will not be considered in cloth measurement/ supplying and fixing powder coated 20mm dia GI round tube hanging support of required length(app. length 1.10m) one end fixing from slab by using 6mm dia expansion bolt at a distance not more than 2m, c/c down end fixed to powder coated aluminium channel frame 45x20mmx1mm thick section by using SS screw as per the direction of engineer in charge including conveyance.
-
-
-
FLOORING - SEAMLESS VINYL FLOORING WITH ANTISTATIC AND ANTIMICROBIAL PORPERTY. It shall be self-leveling 3.00mm anti-static seamless PVC flooring.
Floor shall be smooth, non-slip, impervious material conductive enough to dissipate static electricity but not conductive enough to endanger personnel from electric shock
It shall be Electro Static Discharge (ESD) combat PVC seamless flooring of very high quality thickness not less than 2.00mm. Continuous roll shall be used and with minimum joints. The joints to be welded by special PV thermal units using PVC welding bars of same colors.
The sheet shall be highly durable to shock and indentation. It shall be scratch proof, inert to body fluids, chemicals and disinfectants & shall not be affected by the temperature variations.
140.5
-
-
The flooring shall be done by skilled workers of the accredited agencies, authorized by the supplier of PVC sheets. The Electrical resistance (Point to ground) shall be within 2.5 X 104 to 5 X 106 Ohms. The floor shall not allow buildup of Electrical charges beyond 100V due to antistatic effect. The corners shall not be terminated sharply & concealed coving shall be used to overlap the wall panel to a height of approx. 25mm & sealed perfectly & uniformly. Self leveling compounds shall be used.
-
-
-
Paving the floor with best approved quality fine polished Granite Stone Slabs for work table slabs of size 1200 x 600 of 18 / 20mm thick of Jet Black with machine cut edges laid over a cement mortar bed of 10mm thick using cement mortar 1:3 (One cement and three M.sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
132
-
-
Paving the floor with best quality Double charged Vertified tiles 600 x 600 x 8mm approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
2695
-
-
Providing Leather finished Granite slab Jet Black of similar varieties of approved colour for staircase treads and midlanding including nosing free all draft in all floors over a base layer of cement mortar 1;3 10 to 20mm thick the granite slab shall be laid over the cement mortar by applying color cement slurry in between mortar and slab the granite slabs re to be so laid that there shall be in line with other joint and uniform by cutting machine without any damage to the sides of corner of the granite slabs, the entire area at the that flooring so laid shall be neatly pointing with maching colouring cement at 1.80 kg/m2 etc., The Granite stone slbs and other materials to be used shall be got approved by the Rxecutive Engineer concerned before use on work etc., complete complying with standard specification and as directed by the departmental officers.
105
-
-
Paving the floor with anti-skid tiles of size 400x400x10mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M.sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
552
-
-
Flooring with Joint free Rectified Glazed Ceramic Flooring tiles 305 x 305 x 8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
247
-
-
Providing granolithic floor finish of the 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two M.sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
646
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
1640
-
-
Supplying and fixing fine polished cuddapah slab of 38 / 40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
65
-
-
Labour Charges for Full nosing Cuddapah Slab Including Necessary Charges
135
-
-
Labour Charges for Full nosing Granite Slab Including Necessary Charges
160
-
-
Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
71
-
-
Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
8820
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
9680
-
-
Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.
6311
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
851
-
-
Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
450
-
-
Fabricating Supplying and fixing in position of UPVC anodised 1/3rd fixed glazing 2/3rd prelaminated board of UPVC partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,upvc. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary UPVC clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the UPVC sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.
135
-
-
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections.Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam.
30
-
-
Supplying and erecting in position of 500 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.
(a) MS Skid - 1 No.
(b) Media 11054 No. Vessel with 20 nb Multiport
Valve (with Media Pubble and Fine Sand and
Activated Carbon Filling) set
(c) Feed Pump 0.50 HP – 1 No.
(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.
(e) Membrane 40 x 40 filmtech (or) equilaents /
Osmonic (USA) - 1 No. and Membrane Pressure
Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.
(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.
Low Pressure Switch - 1 No.,
Level Switch - 1 No. &
Necessary CPVC Pipes and Fittings.
The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact
2
-
-
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
1395.5
-
-
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two M.sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.-75 mm thick using 20mm size machine crushed hard granite stone jelly
290
-
-
Design, Supply and fixing of Gas Outlet Points: (Self sealing type - Single / DIN outlet pipe) with 'S' type bracket made up of copper and the out let of non-interchangeable for other gas. The outlet points are brazed with brass bracket with self sealing valve (Stainless Steel) with all accessories and complete set and are covered by plastic cover duly colour coated as per specific gas and button cover etc., complete as directed by the Departmental Officers and as per IS Code 12827/1989 & ISO 7396/1987 Specification.
347
-
-
Supply and Installation of Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non aresenical phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (tee, elbow, reducer, coupling) The copper pipelines should be tested suitable for a steam of working pressure of 17.34 kg/ cm2 (17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical gas copper pipeline should be tested as per standard and commissioning after painting as per International Code No. IS 2379/1963 Table-V. The pipe lines installed at hte various wings and floors etc., complete as directed by the Departmental Officers as per IS code 12827/1989 & ISO 7396/1987 Specification.
-
-
-
28mm dia copper pipe ODx0.9mm thick
465
-
-
22mm dia copper pipe ODx0.9mm thick
1461.7
-
-
15mm dia copper pipe ODx0.9mm thick
2675
-
-
10mm dia copper pipe ODx0.9mm thick
25
-
-
Brass Isolation Valve suitable for the copper pipe and should be of not lubricated 90 degree turn lever ball valve of reputed make, connected in line with medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber "O" ring, tapion lap and etc. All pipe line regulators shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827 /1989. All valves should be pneumatically tested for twice the working pressure for the gas line as per IS Code 12827/1989 & ISO 7396/1987 Specification
-
-
-
28mm dia ball valve
14
-
-
22mm dia ball valve
15
-
-
15mm dia ball valve
68
-
-
Oxygen Manifold arrangement of 2 banks x 12 cylinder each wing with semi automatic control panel which includes contact gauge 2 No., oulet pressure gauge, brass heavy dut IO x regulator 2 Nos., with suitable adopter, flexible SS Hose. Manifold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 12827-1989. Emergency alarms with illuminating display for low/ high pipeline pressure and malfunctioning of system.
1) Manifold top frame with provision for connecting 12 cylinders on right bank and 12 cylinder on left bank with high pressure interconnecting tubing, silver brazing, non return for claping 2 x 12 cylinders and related fastener. The O2 manifold should with stand a pressure of 140kg. / CM2 The installation is commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 /1989 & ISO 7396/1987 Specification .
1
-
-
Nitrous Oxide Manifold Arrangements of 2 banks 3 Cylinder each wing, with automatic control panel which includes contact gauge 2 Nos. outlet pressure gauge, brass heavy duty IOX regulator 2 Nos. with suitable adopter, flexible SS hose. Manifold shall be of a construction and of a designs and material suitable for the service pressure in accordance with IS 12827 -1989. Emergency alarams with illuminating display for low / high pipe line pressure and malfunctioning of system. 1) 2 x3 cyliner Nitrus Oxide Manifold should be suitable with stand a pressure of 140kg/ Cm2 and above along with high pressure copper annealed tail pipes with end brass adapter suitable for Nitrous Oxide Cyliners and manifold.
1
-
-
2) Top frames comprising of high pressure copper pipe of size 12mm ID 1.5mm wall thick with high pressure brass fittings made of high tensile brass and connetions through non -return valves, high pressure copper tail pipes made of high pressure copper pipe size of 7mm ID 1.5mm thick. 3) The disign of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely with fitted heavy duty regualtor. The Manifold should be tested at 3500 pig as per IS 12827/1989 & ISO 7396 / 1987 Specification.
-
-
-
Supply of Flow Meter with Humidifier Bottle Flow Meter should be back pressure compressed and should be accurate gas flow measurement with control range 0-13 litres per miniute. It should meet strict permission and dumbling standard. The meter body should be made of brass materials. The humidifier bottle should be made of unbreadkable polycorbonate material and auto cleavable at 134 degree centigrate. The includes flow meter and its accessories (silicon tube with mask.) The cost of materials including transport, etc., complete as per standard specification and as directed by the Dpartmental Officer and as per IS 12827/1987 & ISO 7396/1987
70
-
-
Supply of Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket for mounting it on the wall. The collection jar should be made of unbreadkable polycarbonate materials which is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officer and as per IS 12827/1989 & ISO 7396/1987 Specification . The rate includes cost of silicon hose with SS nipple on either side.
70
-
-
Theatre Vaccum Unit: The unit should comprise of two reusable 2000ml shatter resistant bottle. Each made up of ply carbonate material and fully autoclavable at 134 degree centigrade, should have a vaccum regulator with instant ON/OFF switch and three way left, right or both. All the above itesm should be mounted on atrolleyy having free moving castor wheels. (As per IS12827/1989 & ISO 7396/1987)
3
-
-
Supply, installation, testing and commissioning of equivalent to Ingersoll Rand Receprocating Air Cooled Type (10HP + 5HP) rating Vaccum Pump as per following provsiions. As per IS 12827 /1989 & ISO 7396/1987 Specification.
a) Vaccum pump -10HP- 1set
b) Electric motor - 5HP - 1 No.
c) DOL Starter with OLR - 1 No.
d) Vaccum switch - 1 No.
e) Vaccum Gauge - 1 No. f) Control frame wth Fittings - 1 No.
g) Suction Scrubber - 1 No
i) GI & MS fittings- 1 No.
j) Brass fittings - 1 No.
k) Exhaust Silencer - 1 No.
l) Base frame for motro and vaccum pump - 1 set
m Pilot line with fittings - 1 set, Vaccum Room & Air Compressor Room Inside
1
-
-
Supply, installation, testing and commissioning of MS fabricated Vertical Mounted Type 1000 liters capacity Vaccum Receiver with inlet and outlet and drain holes provided suitable to operate with vaccum pump etc as directed by the Departmental Officers.
1
-
-
Supply, installation , testing and commissioning of Compressed Air System of Reciprocating Oil Free Air Compressor belt driven type air compressor with following provisions.
As per IS 12827 /1989 & ISO 7396/1987 Specification.
a) 10HP Air Compressor - 2 Nos.
b) Electric Motor 10 HP - 2 Nos.
c) Dol Starter - L&T - 10HP - 1 No.
d) Base Frame Kit (for Motor and Compressor)-1set.
e) Pressure Switch - 1 No.
f) Pressure Gauge - 1 No.
g) NRV and Pilot Fittings - 1No.
h) Delivery Tube - 1 No.
i) Foundation Bolts & Anchor Fasteners - 1 Lot
j) Belt Guard - 1 No.
k) Air Driver 50 to 60 cfm. capacity - 1No. Drain Ball Valve - 1No. Air Outlet Compressor Room Inside Accessories.
Non-Return Valves, Air Pressure Switch, Pressure Gauge, Isolation Valves, Air Filters etc., Inter connecting piping: Mild Steel Pipe of 2" with fittings.
1
-
-
Supply,installation,testing,and commissioning of MS fabricated vertical mounted type 1000 liters capacity Compressed Air receiver with inlet and drain holes provided suitable to operate with vacuum pump,etc., as directed by the departmental officers.
1
-
-
Bed Head Panel of size 1m, length, height 0-0.30cm and depth of 4". The aluminium powder coated with requirement colour for provisioin points of o2-2 No. Air 1 No. Vaccum 1 No. with double electrical socket with switch 2 Nos. with 2 set with IV - bottle holder fixing to the wall hanging including monitor stand etc., complete.
25
-
-
Supply, erection, testing and commissioning of fire fighting application Monoblock Motor Pumpset of 900 LPM at 40 metres head to develop 3.5kg / sq.cm at the heighest and farthest hydrant point to make 30m water jet at the time of fire fighting emergency circumstances, coupled with 15KW / 20HP rated three phase 414 volts, 50 HZ, 2880 rpm electrical motor the pump with cast iron body, bronze impeller, rope gland packaging, suction size of 100mm dia, delivery size of 80 mm dia, including the cost of foundation concrete, anti-vibration mounting, rain safety hood and etc., complete as directed by the Departmental Officers. (Make: Kirloskar KDS 2050 + or Equivalent)
1
-
-
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table 'E' bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
8
-
-
Supply of Fire fighting Application Application MS Hose Box to keep two number of hoses and 1 no. of branch pipe with nozzie having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
8
-
-
Supply, and fixing in position of Fire fighting Application Hose of 63mm dia of 15 metres length binded by coppper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
16
-
-
Supply, and fixing in position of Fire fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzie of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
16
-
-
Supply, installation of Fire fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20 mm dia ball valve and open and close spray nozzie, warm clip, etc., as per the standard pattern of nay reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doiing the dismantled portions to its original condition wherever found necessary., etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
6
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table 'E' gaskets, bolts & nuts including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT.-100mm dia
6
-
-
Supply, erection, testing and commissioning of MS ‘C’ Class heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make; JINDAL/EQUIVALENT.
-
-
-
150 mm dia
60
-
-
100 mm dia
130
-
-
80 mm dia
240
-
-
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR/ EQUIVALENT.
1
-
-
Supply and laying of 2 core 1.5 sq.mm armoured copper cable armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
1200
-
-
Supply and laying of 4 core 10 sq.mm armoured copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI Clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
120
-
-
Supply, erection, tesing and commissioning of Fire Fighting Application direct on line main control panel to control electrical Terrace Pump Motor of 3.75KW / 5HP rated 415 volts / 50 Hz 3 phase, 2880 RPM including necessary auto/ manual operations, over head relay, selector, switches arrangements, voltmeter and ammeter provision, etc., as directed by the Departmental Officers
1
-
-
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST ? EQUIVALENT.
30
-
-
Supply and fixing Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS:15683., complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST ? EQUIVALENT.
8
-
-
Supply, erection, testing and commissioning of cast iron body and gun metal or stainless steel Internal Not Return Valve of size of 80mm dia to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table 'E' gaskets, bolts & nuts etc., as per IS 5312 including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Departmental Officers.
2
-
-
Supply, Installation, testing and commissioning of Micro Processor based Conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230/24 volt SMPS unit, 2 Nos. of 12 volt, 7 AH standby batteries, suitably mouned on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
1
-
-
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers, (Make: Ravel / Equivalent)
8
-
-
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers, (Make: Ravel / Equivalent)
8
-
-
Supplying, laying and jointing UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance. (Schedule-40) for of approved quality and best variety conforming including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
UPVC PIPE 20mm dia
265
-
-
UPVC PIPE 25mm dia
226
-
-
Supplying, laying and jointing CPVC (Chlorinated Poly Vinyl Chloride) Pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio-11 of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level)
-
-
-
CPVC PIPE 20mm dia
150
-
-
CPVC PIPE 25mm dia
100
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
20 mm dia gate valve
43
-
-
25 mm dia gate valve
41
-
-
32 mm dia gate valve
10
-
-
40 mm dia gate valve
10
-
-
50 mm dia gate valve
7
-
-
Supplying and fixing in position 15mm dia SS Heavy Duty Long Body Tap / SS Swan Neck Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
45
-
-
Supplying and fixing in position 15mm dia brass SS Elbow Action Tap of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
21
-
-
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 50 x 40x83.5cm hindware make of delta model (without pedestal) with a pair of cast iron brackets, including cost hindware angular stop cock with flange, Pillar cock, 32mm waste coupling, including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
36
-
-
Supplying and fixing of Stainless steel Sink of size600 x 600 x 200mm complete as directed by the departmenttal officers.
19
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
20
-
-
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
36
-
-
Supplying and fixing approved best quality Stainless steel 304 grade towel rail 600mm long and 20mm dia pipe. The ends of the pipe is to be bended with required depth and the same is fixled in the wall firmly and the ends are covered with stainless steel cup etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
36
-
-
Supplying and fixing best approved best quality Procelain CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
36
-
-
Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. -Above Ground level -External water supply
-
-
-
32 mm dia
135
-
-
40 mm dia
338
-
-
50 mm dia
80
-
-
50 mm dia -Below Ground level -External water supply
890
-
-
Supplying UPVC Specials (Un-Plasticized Polyvinyl Chloride) in water supply arrangements (both in internal and external water supply arrangements
Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed
-
-
-
20mm dia UPVC Elbow
90
-
-
25mm dia UPVC Elbow
50
-
-
32mm dia UPVC Elbow
38
-
-
40mm dia UPVC Elbow
25
-
-
50mm dia UPVC Elbow
21
-
-
20mm dia UPVC Tee
60
-
-
25mm dia UPVC Tee
30
-
-
32mm dia UPVC Tee
35
-
-
40mm dia UPVC Tee
23
-
-
50mm dia UPVC Tee
20
-
-
25mm dia UPVC Union
50
-
-
32mm dia UPVC Union
36
-
-
40mm dia UPVC Union
23
-
-
50mm dia UPVC Union
20
-
-
20x15mm dia UPVC reducer
40
-
-
25x20mm dia UPVC reducer
40
-
-
32x25mm dia UPVC reducer
20
-
-
40x32mm dia UPVC reducer
25
-
-
50x40mm dia UPVC reducer
10
-
-
25x20mm dia UPVC reducer elbow
30
-
-
32x25mm dia UPVC reducer elbow
20
-
-
40x32mm dia UPVC reducer elbow
10
-
-
50x40mm dia UPVC reducer elbow
10
-
-
25x20mm dia UPVC reducer Tee
40
-
-
32mm dia UPVC nipple
30
-
-
40mm dia UPVC nipple
16
-
-
50mm dia UPVC nipple
8
-
-
32mm dia UPVC coupler
35
-
-
40mm dia UPVC coupler
25
-
-
50mm dia UPVC coupler
10
-
-
Supplying and fixing of PVC readymade water tank (1000lit)of best and approved quality with ISI specification labour for fixing etc., Complete.should be got approved by the Executive Engineer before use on works
2
-
-
Supplying and fixing in position Indian water closet Orissa pan (ECO) of size 58x44 cm white glazed earthenware hindware brand (C.No: 20042) with P or S trap confirming to BIS with sand cushion and forming flowing all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5 100mm thick and finishing the top with required slope etc., including supplying and fixing of sleek fresh ISI make of size 32.50x47.60x15.50cm star white Hindware make 10lit/12.50lit capacity low level flushing tank etc., complete with fittings such as angular stopcock, with wall flange, connecting hose, T.W. Plugs, Screws, 15mm Brass Nipple, etc., complete and also giving necessary connection to the pvc pipes, leakproof joints and dismantling the brick masonry wall / RCC roof / Floor slab and making good to the dismantling position to original condition etc., complete complying with standard specification. The IWC and all accessories should be got approved by the Executive Engineer before use on works.
14
-
-
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....such as 15mm brass connections, 15mm GM wheel valve,
15
-
-
15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
-
-
-
Supplying and fixing in position CP Two Way Bib Cock with Health Faucet etc., complete complying with standard specification.
15
-
-
Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm
4
-
-
supplying and fixing if Fine Polished Granite Slab 1200 x 600 of 18 / 20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,
2.5
-
-
Supplying and fixing position CI Nahani Trap / Floor Trap of the sizes of 100x75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
62
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
75 mm dia
196
-
-
110 mm dia
150
-
-
160 mm dia
365
-
-
Supplying and fixing in position of best quality of Chemical coated Foamcore and underground PVC Soil / waste pipes of various dia having 6 kg / sq.cm. pressure and SN8 KN/m2 with BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The Chemical coated foamcore PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid
-
-
-
110 mm dia
120
-
-
160 mm dia
250
-
-
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
75 mm dia PVC Elbow
40
-
-
110 mm dia PVC Elbow
40
-
-
160 mm dia PVC Elbow
30
-
-
75 mm dia PVC Elbow with Door
25
-
-
110 mm dia PVC Elbow with Door
23
-
-
160 mm dia PVC Elbow with Door
25
-
-
75 mm dia PVC Tee
22
-
-
110 mm dia PVC Tee
20
-
-
160 mm dia PVC Tee
20
-
-
75 mm dia PVC Double "Y" with door
18
-
-
110 mm dia PVC Double "Y" with door
18
-
-
160 mm dia PVC Double "Y" with door
18
-
-
75 mm dia PVC Vent cowls
10
-
-
110 mm dia PVC Vent cowls
35
-
-
Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
-
-
-
Clear size 0.60m x0.60m
37
-
-
Clear size 0.90m x0.90m
15
-
-
Supply and fixing of Manhole Cover SFRC as per following size including labour and transportation charges etc., complete as directed by the departmenttal officers.
-
-
-
600 x600mm
30
-
-
900 x900mm
15
-
-
Drilling of Borewell in sedimentary strata of hard rock stone shale pebbles bolders etc., By first taking a pilot bore of 150mm dia and then enlarging to the required dia by direct or reverse rotary mud circulation method using rotary rigs, fuel labour and drilling bentonite and water required for dirlling at site.
-
-
-
upto 150m below GL
150
-
-
From 151 to 180m
30
-
-
From 181 to 210m
30
-
-
From 211to 240m
30
-
-
From 241to 270m
30
-
-
From 271to 295m
25
-
-
Supplying of best approved quality of PVC casing pipe of 6" dia (Special Blue Pipes for Bore Well) for borewell with socket end to suit borewell of required depth -6kg/cm2 best approved quality with ISI mark with necessary PVC coupling etc.,
18
-
-
Supplying and fixing of suitable PVC endcap (6kg/cm2) for 6" dia borewell of best quality with ISI mark
1
-
-
Supplying and fixing of Nylon Rope for holding the pumpset in position in to the bore hole including the cost of rope,transport to the site and tieing the motor and lowering in to standard specifications.The rope to be used on work shall be got approved by the Executive Engineer before use on work.
360
-
-
Supllying of best and approved quality of 40mm dia UPVC pipe including laying in the basement and tying with copper wire etc., complete complying with standard specification.
285
-
-
Supplying and erection of 5 HP submersible pump of ISI make, Pumping water from bore well of 6” diameter including transportation charges, erection charges etc., complete complying with standard specification and as directed by the departmental officers.
3
-
-
Supplying and erection of 3 Phase Panel Board including labour charges including transportation charges, erection charges etc., complete complying with standard specification and as directed by the departmental officers.
1
-
-
Supplying and erection of submersible wire following size cable PVC insulated and sheathed 3core flat type copper cable with ISI make including erection inside the bore well and open run of clamping etc., completer complying with standard specification., as directed by the departmental offcers.,
370
-
-
Supplying and fixing in position best quality BARSCREEN with Stainless steel Basket of 0.6M*0.6M *0.6M mesh size and 1 inch X 1 inch with stay ropes etc.
4
-
-
SUPPLY AND INSTALLATION OF OZONE SYSTEM, WITH GENERATOR, AIR CONCENTRATOR, MIXING VENTURI, PRESSUE PUMP WITH ALL Assembly. PIPE LINES AND CABLING.
1
-
-
Automatic pH correction system with Acid and Base dosing pumps with 50 liters tanks 2 numbers
1
-
-
SUPPLY AND INSTALLATION OF TREATED EFFLUENT TRANSFER PUMPS CAPACITY; 1.0HP, 3 PHASE, MAKE-KIRLOSKAR, MONOBLOCK; MAKE-KIRLOSKAR, Mono block. FLOW RATE: 15000 LITERS/HOUR @ 10 meters head. With armoured cable 1.5 sq,mm, 4 core connection from control panel to Pump. Suction and Delivery pipe 1.5 inches, with Dry run sensor
2
-
-
SUPPLY AND INSTALLATION OF COARSE BUBBLE with stainless steel fittings, bruited hose, clamps, stay ropes etc.
1
-
-
SUPPLY AND INSTALLATION OF TOOLS KIT, SAFETY GLOVES, FIRE EXTINGUISHER etc.
1
-
-
SUPPLY AND INSTALLATION OF SLUDGE PUMP CAPACITY; 0.6HP, 3PHASE, MAKE-POINT, SUBMERSIBLE, principle centrifugal, FL class insulation, IP 68 PRODUCTION standard, FLOW RATE: 10000 LITERS/HOUR @ 10 meters head. With armoured cable 1.5 sq,mm, 4 core connection from control panel to Pump. Delivery pipe 1.5 inches
1
-
-
SUPPLY AND INSTALLATION OF DECANT CUM FILTER FEED PUMPS CAPACITY; 2 HP, 3 phase, MAKE-KIRLOSKAR, Mono block. FLOW RATE: 25000 LITERS/HOUR @ 10 meters head. With armoured cable 1.5 sq,mm, 4 core connection from control panel to Pump. Suction and Delivery pipe 1.5 inches, with Dry run sensor
2
-
-
SUPPLY AND INSTALLATION OF SEWAGE TRANSFER PUMPS CAPACITY; 1.0HP@ 3.P.H, MAKE-POINT, TYPE: SUBMERSIBLE, principle Vortex, FL class insulation, IP 68 PRODUCTION standard FLOW RATE: 15000 LITERS/HOUR @ 10 meters head. Delivery pipe, UPVC, schedule 40, 1.5 inches or 40 mm dia, make Supreme or finolex with Union, Non return valve, Pump Selection UPVC Ball valve and other required UPVC fittings from end to end.
Electrical cable connection from pump to control panel, cable type armoured cable 1.5 sq,mm, 4 core, with pump side connection and insulation with MRF water proof tape, Cable conduit pipe PVC 4 kg 50mm dia, Control panel side connection with double compression gland, on and off provision in control panel with conductor, relay, MCB, connector and all internal wiring, connection, inside control panel.
Water level controller unit inside control panel, Sensors inside the tank, connection integrated from pump to control panel, sensor cable type 3 core, flexible 1 sq.mm inside conduit pipe.
2
-
-
SUPPLY AND INSTALLATION OF MOTOR FOR AIR BLOWER, MAKE: CROMPTON, CAPACITY 5 HP, 3 PHASE, 4POLE, 400/415/440 VOLTS, ALTERNATING CURRENT, SQUIRREL CAGE, TOTALLY ENCLOSED, FAN COOLED (TEFC) BARE SHAFT,INDUCTION MOTOR IN “IE2” ENCLOSURE, RPM-1500.
Electrical cable connection from pump to control panel, cable type armoured cable 6 sq,mm, 4 core, with motor side connection and insulation with MRF water proof tape, Cable conduit pipe PVC 4 kg 50mm dia, Control panel side connection with double compression gland, on and off provision in control panel with conductor, relay, MCB, connector and all internal wiring, connection, Timer control from inside control panel.
2
-
-
SUPPLY AND INSTALLATION OF AIR BLOWER TYPE;TWIN LOBE, MAKE ; A1, Model A144, CAPACITY; 5 HP, 3 PHASE, with Crompton motor Motor RPM, ACCESSORIES: BASE FRAME, SUCTION FILTER, SUCTION AND DISCHARGE SILENCER, Non-return VALVE, SAFETY VALVE, SET OF V BELT DRIVE. FLOW MEDIA;AIR, 120 CUBIC METR/HR.MATERIAL OF IMPELLER-CI, DIRECTION OF FLOW; VERTICAL, PRESSURE; 0.4BAR,RPM-1310
2
-
-
SUPPLY AND INSTALLATION OF DUAL MEDIA FILTER Material of construction FRP (fiber reinforced plastics) DIA; 0.6M, HEIGHT 1.50M, Top manhole 300mm for filling the media, Bottom hand hole 100 mm for removing the media with end flanges, inlet and outlet pipe size 2 inches, Air vent and drain vent 1 inches size with end valve. FLOW RATE 25000 LITERS PER HOUR, with multiport valve and inter connecting UPVC 1. Inches dia and fittings.
2
-
-
SUPPLY AND INSTALLATION OF CHLORINE DOSAGE PUMP CAPACITY- 6 liters per hour, with suction and delivery hose, online injector and MAKE; e-Dose, end to end power supply with 1 sq.mm flexible cable from control panel to dosing pump. wiring in such a way when filter feed pump runs dosing pump will also work in parallel.
1
-
-
SUPPLY AND INSTALLATION OF coarse bubble disk diffuser 3 inches dia with PVC thread holder and rubber top with 3 mm holes. Inter connecting bruited pressure hose 1 inch dia from header pipe 1 inch isolation valve to diffuser accessories fittings stainless steel Tee. This has to be installed in Collection cum Equalization tank
1
-
-
SUPPLY AND USE OF BACTRIAL CULTURES FOR STABILISATION
3
-
-
SUPPLY AND INSTALLATION OF TOOLS KIT, SAFETY GLOVES, FIRE EXTINGUISHER , CHLORINE DOSAGE TANK-50 LTS
1
-
-
SUPPLY AND INSTALLATION OF Fine bubble membrane diffusers 60 MM DIA and 1000 mm length, Make : Techpro with PVC support pipe inside and fine pore membrane housing outside. This has to be installed in SBR TANK.
20
-
-
SUPPLY AND INSTALLATION OF Diffuser accessories MOC STAINLESS STEEL, WILL BE CASTED IN 8 INCHES BY 8 INCHES , 8 INCHES HEIGHT CONCRETE BLOCK. STAINLESS STEEL TEE, PVC ROPE FOR RETRIVING THE DIFFUSER SET. Inter connecting bruited pressure hose 1 inch dia from header pipe 1 inch isolation valve to diffuser accessories fittings stainless steel Tee. This has to be installed in SBR TANK.
10
-
-
Commissioning and Testing, training the Hospital person for 15 Days to operate entire STP, ETP system from Barescreen, Ozone system, Automatic PH correction, Suction and elivery systems, Fire Extinguisher, Return sludge pump, Decanting cum filter feed pumps, Air blower chloring dosage pump, coarse bubble disk diffuser, Bactrial cultures, fine bubble membrance diffusers etc, complete.
1
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) (DATA-A)
621
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (DATA-B)
144
-
-
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End. (DATA-C)
4
-
-
Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.(SD-526)
56
-
-
Supply and fixing of Single Box type fitting complete with TW round blocks on wall or ceiling with 4'18W crystal glass LED tube light with PVC unsheathed Copper leads from the terminals to the fitting. (Higher end) (DATA-D)
333
-
-
Supply and fixing of 9W LED bulb for BH point. (DATA-E)
69
-
-
Supply and fixing of 1200mm (48") AC ceiling fan (High Speed) complete (Higher End) with 2 module 100W fan step regulator (Higher End) with 1 Metre down rod on the existing fan clamp. (DATA- F)
222
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD-114)
49
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan (SD-120)
49
-
-
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia GI pipe (class B) with 1no. 32mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. (SD-535)
12
-
-
Supply and fixing of 3nos. 6A two module 5pin socket, 3nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End. (SD-476)
240
-
-
Supply and fixing of 1no. 6/16A two module socket, 1no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End. (SD-488)
201
-
-
Supply and fixing of 20Amps DP plug and socket in sheet steel enclosure with 32A DP MCB in flush with wall with earth connection. [for AC Plug] (SD-140)
35
-
-
Supply erection testing commissioning of 2.0TR (6000 KCal/ Hr) ABS Plastic split type Air Conditioner conforming to IS1391 [Part-2] 1992 with Rotary compressor operating on Non CFC refrigerant suitable for wall mounting operating on 230V 50HZ single phase AC supply with Three Star rating Model as per BEE Specification and capable of performing the following functions. A) Cooling
B) Dehumidifying
C) Air circulating
D) Filtering The installation work for the above split type AC units includes the following.
1.Mounting/ fitting indoor and outdoor units at their respective locations. 2.Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm 3.Insulating the suction pipe with expanded polythene foam of 5mm thick tubing. 4.Laying 15mm dia flexible PVC drain pipe of 6mtrs length to throw out the condensate water being formed in the indoor unit.
5.Leak testing the entire gas unit.
2
-
-
6.Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit. (Make - Carrier/ Voltas/ Blue star make only) [SR]
-
-
-
Supply and fixing of 5KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply. [SR]
2
-
-
Supply and fixing of MS Stand for fixing outdoor unit. [SR]
2
-
-
Supply and laying of 5/8" and 3/8" Copper pipe. [SR]
5
-
-
Supply and fixing of 20A DP MCB in Metal box DP enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher End make) (For Ambulance shed)(DATA-)
1
-
-
Supply and fixing of 32A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher End make) (DATA-G)
4
-
-
Supply and fixing of 200A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuse double break on suitable angle iron frame work with MS cable entry boxes with earth connection only (SD-724)
1
-
-
Supply and fixing of 63A TPN MC switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. [For Lift, Pump main] (SD-166)
3
-
-
Supply and fixing of 63 A FP MCB with 63 A 30mA FP ELCB in 8 module weather proof enclosure in flush with wall and making good of the concealed portion with earth connection(Higher End)(DATA-H)
5
-
-
Supply and fixing of 8way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 6nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. (SD-594) (For UPS)
1
-
-
Supply and fixing of 7segment 4way TPN MCB sheet steel distribution board (Higher end) with metal/ acrylic door cover flush type/ surface type fitted with busbars and neutral links with single/ three phase MCB outgoings and separate 4way provision for accomodating one no. 4pole incoming MCB/ Isolator and another separate 4way provision for accomodating one no. 4 pole ELCB/ RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and separate provision for MCB/ Isolators (totally 12nos) for sub incomers in 3segments with label holder and provison for taking up cable for size not less than 35sq.mm. with the following in flush with wall with earth connection only 63A 4P MCB - 1 no, 63A 4P 30MA RCCB/ELCB - 1 no,63A DP MCB Isolator -3 nos, 6A to 32A SP MCB - 12 nos . [Lighting] (SD-714)
16
-
-
Supply, erection, testing and commissioning of Uninterrupted power supply (UPS) (Sine wave) unit of capacity 3KVA with input voltage 48V DC supply, output voltage 230V, 50Hz AC supply with following accessories / Circuits and with 2hrs of battery backup of full load respectively. 1.Battery Charging Device
2.Inverter Circuit
3.Overload as well as short circuit Protection. 4.Indication for all operation like battery charging, over load, low battery etc.
5.Reset switch
6. 4 Nos. of 12V IT 500 150AH Exide Inva Tall Tubular Battery 7.One layer wooden / steel fabricated stand. (SR)
4
-
-
Supply and run of 2 of 1.5 sq.mm (22/ 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour. (for UPS) (DATA-I)
180
-
-
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. [For 3x6A Computer Plug] (SD-414)
1250
-
-
Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.. [For 8W SPN MCB DB for lighting, 20A MC Plug,Socket 16A Power Plug] (SD-57)
2100
-
-
Supply and run of 2 of 6 sq.mm(84/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour (SD-59)
300
-
-
Supply and run of 3 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14SWG TC wire with painting of suitable colour. (DATA -J)
35
-
-
Supply and fixing of 1 No 6A two module 5 pin socket and 1 No.6A one module 1 way switch with suitable module cover plate(Plastic) on 3 module surface mounting box(GI) on wall with connections complete(SD-462)
10
-
-
Supply and fixing of 16A Two-way switch in suitable Modular flush type GI box on wall with suitable front cover plate with earth connection (Higher End) (For Lift well lighting Control). (DATA -K)
4
-
-
Supply and fixing of WT bulk head fitting with suitable guard with 9W LED lamp. (DATA-L)
10
-
-
Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD-424)
40
-
-
Supply and run of 4 of 25 Sq.mm (168/0.45) PVC insulated S.C unsheathed Cu.conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (For VTPN DB) (DATA-M )
20
-
-
Supply and fixing of 8 ways SPNMCB distribution board made out of sheet steel enclosure complete with bus bar arrangements incorporating the following controls with double door arrangements [IP 42 Metal door of Higher End] in flush with wall & making good of the concealed portion with earth connection with the following:.(1) 32A DPMCB as Incoming: 1No. (2) 10A DPMCB as outgoing: 2Nos (3) 10A SPMCB as outgoing : 2 Nos. ( MCBDB, Isolator, MCB should be Higher End with ISI mark)] (LIFT Head Room) (DATA-N)
2
-
-
Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCCB as incoming and 6 nos. 63A to TP MCB as outgoing in flush with wall with earth connection only. Higher End (DATA-O)
4
-
-
Supply and run of 4 of 16 sq. mm (101/ 0.45) PVC insulated S.C unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (From Panel Board to VTPN DB) (DATA -P)
250
-
-
Supply and fixing of 65mm dia. (2 -1/2") GI pipe (class B) of 6metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour. (SD-543)
2
-
-
Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (for St.Light) (SD-202)
35
-
-
Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (for St.Light) (SD-220)
10
-
-
Supply and fixing of brass cable gland for 4 x 10 sq mm PVC armoured LTUG cable, with earth connection. (for St.Light) (SD-182)
4
-
-
Supply and Erection of 315A capacity dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel enclosure with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two rows with a central bus bar chamber and two cable chambers at the top and bottom conforming to IE rules INCOMER: 315A FP switch disconnector fuse units interior only with HRC fuse Double Break Switch -1 No
OUTGOING:
125A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 5 Nos
63A TPN switch disconnector fuse units interior only with HRC fuse Double Break Switch - 7 Nos
(All the TPN Switch should be of Higher End with ISI)
1
-
-
The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partition, 2Nos 25x3mm tinned copper flats should be provided all round the panel for earth bus.
The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and Each switch should be connected with 2 Nos earth bus with 2 runs of No.8 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly.
-
-
-
The panel should have a separate metering chamber at the top side consisting of 0-600V Voltmeter with Selector Switch, 0-400A Ammeter with Selector Switch and CT arrangement, Pilot lamps, toggle switches, fuse units. The panel should be provided with two coats of Powder Coated paint of approved colour over one coat of zinc oxide primer, approved by the site officer and also the danger board. Superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board to be affixed, providing Rubber Beading for All Doors
-
-
-
The bus bar chamber should have 3 Nos of 38mm x 6mm tinned copper flat for 3 phases and 1 No 1" x 1/4" tinned copper flat for Neutral. The outgoing switches should be connected to the bus with the following copper flats. 1) 125A TPN switch with 30mm x 3mm tinned copper flat. 2) 63A TPN switch with No.8 SWG tinned copper rod. The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection. (DATA-Q)
-
-
-
Supply, Fabrication, Erection, Testing and commissioning of indoor dust and vermin proof four compartment CT Metering panel made up of 16SWG CRCA sheet of size 48" x 48" x 18" with necessary stiffner and provided with following arrangements. 1. Front open door for each compartment provided with sealed locking arrangement. 2. 6mm thick hylam sheet in metering compartment for fixing 3phase 415V 4wire 50Hz Digital Energy meter provided by TANGEDCO. 3. 3Nos 1.5" x 1/4" and 1" x 1/4" Copper bus bar on suitable bus support with 3Nos 200/5A CTs in bus bar compartment. 4. 3Nos 315A fuse unit & 1no 250A neutral link on 6mm thick hylam sheet in fuse comparment.
1
-
-
5. Fixing of control fuses and wiring with flexible PVC copper wire and LED Indicator arrangements. 6. 2Nos copper earth bus of 1" x 1/8" in the rear side. 7. Suitable MS base channel for mounting. 8. Viewing glass in the door for meter compartment. 9. Provision of cable entry and outgoing compartment. 10. Painting the panel with 2 coats of epoxy paint over one coat of red oxide.(DATA-R)
-
-
-
Supply and fixing of 315 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connections only. (SD-728)
1
-
-
160KVA Generator
Supply, testing, commissioning and handing over of 1No, 160KVA Diesel generator set of 0.8PF, 3phase, 415Volts, 50Hz, 1500 RPM complete in all respects as detailed below.
A) ENGINE :
Water cooled diesel engine suitable for generator application with a shaft out put of 199 BHP suitable at 1500 RPM under NTP conditions .The engine shall comprise the following standard scope of supply: 1) Dry type Air cleaner. 2) Expansion bellow. 3) Radiator, radiator fan and mounting. 4) Air to air charge cooler. 5) Exhaust gas turbo charger. 6) Lube oil cooler and lube oil filter. 7) Fuel filter (pre and micro). 8) In-line mono-block fuel injection pump with governor and fuel feed pump. 9) Electronic governor. 10) 12V/ 24V battery charging alternator. 11) 12V/ 24V Volt electric starter motor. 12) Engine test certificate. 13) Residential Mufler. 14) Fly wheel with starter ring.
1
-
-
Engine instrument panel/ mounting: Engine control panel consisting of ON/ OFF/ START/ KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator. Safety system of Engine: The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure. 2) High water temperature . 3) Vee - belt failure and over speed. 4) Low battery indication. The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load.
-
-
-
B) ALTERNATOR : 160KVA/128KW capacity of Brushless Alternator AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self exited,self regulated design to run at 1500 RPM under NTP conditions conforming to IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate C) AMF CONTROL PANEL: The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connecting incoming and outgoing leads have been made on the control panel complete set.
-
-
-
1) 1No AC Ammeter. 2) 3Nos current transformer with suitable Ratio. 3) 1No Ammeter selector switch. 4) 1No AC voltmeter. 5) 1No Voltmeter selector switch. 6) 1No Frequency meter. 7) 1No KWH meter. 8) 1No power factor meter. 9) 1No KW meter. 10) Battery charging set comprising of the following for charging the battery from mains. a) Transformer/ Rectifier, b) DC Ammeter, c) Charging rate selector switch, d) DC voltmeter, e) Circuit breaker, f) Voltage Regulator, g) ON/ OFF switch. This will be in addition to auxiliary neutral contactor for battery charging alternator fitted to the Engine.
-
-
-
11) 1set Air Break contractor with auxiliary neutral conactor for main supply 12) 1set low voltage HRC fuse for the short circuit protection of the main supply. 13) 1set alternator contactor with auxiliary neutral contactor. 14) 1set three pole bimetal release for over load protection of the alternator. 15) 1set low voltage HRC fuse for the short circuit protection of the alternator. 16) 1set DC control relays incorporating engine start/ stop and failure to start/ lockout. 17) 1set selector switch auto/ manual.
-
-
-
18)1No push button "Start".19)1No Push button "Stop".20) 1NO push button "Reset".21) 1No signal lamp for indicating loads on mains. 22) 1No Signal lamp for indicating load on set.23) 1No. Signal lamp foe indicating set fails to start. 24) 1 No signal lamp for indicating 'Battery charger ON'.26) 1 set pilot lamps of 3 Nos. 27) MCCB of 250A capacity with magnetic thermal over load release,instant short circuit trip and under voltage release switch.28)Rectangular copper bus bars for 250A (1 no for each phase,neutral and earthing terminal) capacity duly coded with heat shrinkable PVC sleeves. 29) 1 No mains voltage monitor. 30) Hooter /Audio alaram for indication set fails to start and for DG O/L 31) 1set timers. 32) Audio and visual indication arrangements for , a) Low lubricating oil pressure, b) High water temperature, c) Over speed. 33) 1No Earth fault relay. 34) Isolator to Isolate the neutral.
-
-
-
Note: 1. The control panel should be complete with necessary fuses, cables, labels, other accessories with neutral isolation arrangements. 2. The engine should trip for the following conditions. a) Low lubricating oil pressure, b) High water temperature, c) Over speed. 3.Supply and fitment of Auto mains failure panel to EB service with 315Amps switch and contactors with scuf control relays, timers etc. D) ACOUSTIC ENCLOSURE : Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet. The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm, powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and door shall have inside lining of FIRE-RETARDANT 64kg/m density mineral wool of 100mm thickness as acoustic material.
-
-
-
Four hinged doors shall be provided to canopy. The maximum permissible sound pressure level should be as per the norms prescribed by the Central Pollution Control Board/ State Pollution Control Board/ Competent Authority concerned or should be within 75 db(A) at 1 meter from the enclosure surface whichever is advantageous to the department. The emergency stop should be available on the enclosure panel. The enclosure provided shall be duly approved by the Engine Manufacturer of the Engine provided for Diesel Generator Set mounted inside and should be to the satisfaction of inspection/ testing authority concerned.
-
-
-
SURFACE TREATMENT – PAINTING :
The enclosure shall be suitably treated for degreasing, de-rusting and phosphating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES :
Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any. WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg C ambient temperature. No grounding required on the ground, only a level surface capable of withstanding the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading. Temperature rise inside the canopy:
Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well with in 5-7 deg centigrade.
-
-
-
D) Base Frame
Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges.
-
-
-
E) Fuel Tank
Fuel tank of atleast 300 Ltrs capacity shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. First charging of fuel oil to full capacity and first carging of battery while handing over to Department.
F) Battery 1No. 12V 150 AH battery G)TOOLS: Supply of tools such as 15" cutting plier -1 No, Screw Driver 9" & 6" -2 Nos, DE Spanners (6 Nos)- 1 Set, Adjustable Spanner -1 No, 1/2 lb Hammer -1 No, Spanner for removing engine oil plug -1 No, Line Tester -1 No for the maintenance and operation of generator. (Make : Ashok Leyland/ Kirloskar/ Cummins/ Greaves/ Equivalent) (SOR - XIV - PART "N" - 9 - M-2082) (SOR - XIV - PART "N" - 9 - M-2082)
-
-
-
Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD-742)
1
-
-
Erection of Gen set: Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion all around the foundation for erection of 160KVA Diesel Generator set .
1
-
-
Supply and installation of exhaust piping with silencer of sufficient length with suitable MS pipe so as to extend outside the generator with necessary thermal insulation. (SOR - XIV - PART "N" - 9 - M-2085)
5
-
-
Supply and demonstration of the following safety accessories: a) 1 meter x 1 meter x 1/2 inch 11 KV rubber mat- 5Nos. b) one set of 4 nos 9 litres fire buckes with metal stand frame - 1 set. c) first aid box with medicine -1 no d) 11 KV rubber hand gloves - 2 Nos. e)2 kg capacity dry powder type fire extinguisher - 2 nos f) Hand operated Pump to transfer fuel from standard barrel to fuel tank-1 no. h) Battery water acidity tester - 1 no. e)Earth Dsicharge rod - 1No j) Danger Board - 1 no. k) Emergency Light with PL Lamp - 1No.
1
-
-
Preparation of site plan,physical layout, electrical line schematic diagram in 10 sets getting drawing approval from CEIG,preparation of completion report,rectification report and arranging CEIG inspection and obtaining safety certificate , preparation of 1 set of approved drawing and a copy of safety certificate in a neat frame work to be fixed in generator room(MR)
1
-
-
Supply and laying of 3½ x 240 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-212) (For EB, Generator, Change over & 315A Panel connections)
110
-
-
Supply and clamping of 3½ x 240 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-230)
20
-
-
Supply and fixing of brass cable gland for 3½ x 240 sq.mm. PVC armoured LTUG cable with earth connection. (SD-194)
8
-
-
Supply and providing cable end termination of 3½ x 240sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. (DATA - )
8
-
-
Supply and Laying 3 ½ x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (For Lift and BMW Building) (SD-204)
70
-
-
Supply and clamping of 3 ½ x 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-222)
85
-
-
Supply and fixing of brass cable gland for 3½ x 25 sq.mm PVC armoured LTUG cable with earth connection. (for Lift) (SD-186)
6
-
-
Supply and providing cable end termination of 3½ x 25 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (for Lift) (SD-235)
6
-
-
Design, Engineering, Fabrication, Supply, Erection, Testing, Commissioning and handing over of 26 Persons capacity Gearless (Bed Cum Passenger Lift with Machine Room) complete with the following specifications
2
-
-
I. General
Number of Lift : 1 No
(a) Capacity and type : 26Persons (1768kg) Capacity Bed Cum Passenger lift. (b) Speed : 1 Mtr / Sec.
(c) Drive : Micro Processor based VVVF (d) Size of Lift well : 2400x3000 (MM Wide x MM Depth) as per IS 14665 (partI) 2000 to be constructed by PWD civil wing.
(e) No. of floors : 3 (Ground + 2nd Floor)
(f) Total height of Travel : 11 Metre/ PIT 1600mm/ Head Room 4500mm.
(g) No.of stops : 3 (Ground + 2)
(h) No.of opening : 3 (Ground + 2)
(i) Construction of lift well : R.C.C. with brick masonry.
(j) Power supply : AC 415/ 440 Volts, 3phase, 50 Cycles.
(k) Auxiliary supply : 230V, AC supply ( Single phase)
(l) Position of machinery : Directly above the lift well-Gearless.
(m) Lift pit depth : 1600mm
(n) Leveling accuracy : High level accuracy with smooth & jerk free travel and stopping.
-
-
-
II. CAR
a. Size of Lift Car inside : 1600mm x 2400mm x 2000mm (MM Wide * MM Depth * MM Height)
b. Design of lift car: Stainless Steel Hair Line finish ( SS-304 grade) High quality car.
c. Car ceiling : Sleek (Small circular Lights).
d. Car floor : Grey- 20mm Reccess.
e. Car fittings : Stainless steel illuminating push button and 7 segments digital position indicator and overload indicator, 220V A/C electric fan 300mm swing, LED fittings, UPS operated emergency alarm and light, floor announcement with musics, ARD function announcement.
f. No. of Opening : One in front only
g. Car Entrance : One in front only
h. Clear opening : 1200 x 2000 (mm Wide x mm Height)
III. ENTRANCE a. Car Door : Power Operated side opening sliding door (SS-304 grade High quality Hair line finish Stainless Steel door)
b. Landing Entrance Doors: side opening sliding door (SS-304 grade High quality Hair line finish Stainless Steel door)
c. Type of Entrance Frame: Stainless steel
-
-
-
IV. OPERATION Microprocessor based Simplex Selective Collective control with/ without attendant. V. Car and Landings : Digital floor position indicator in car and all landing. Dry cell operated alarm bell and emergency light with Automatic charging device, Up/ Down Digital direction indications at all landings and in car.
VI. LADDER FOR LIFT MACHINERY: To be provided by the Lift contractor in lift pit & in machine room.
VII. SPECIAL FEATURE :
Digital position indicator in Car and landings. Battery operated Emergency light and Alarm bell, call register signal and VF Door operator, false ceiling in Car. Infra red door screen, Vandal proof SS Button with SS cover/ Automatic Rescue Device, Fire mans switch, over load indicator and Intercom provisions with Instruments and floor Annunciator, SS hand rails and ON/ OFF key and free service for 1year.
VIII. Automatic Rescue Device (ARD):
To facilitate landing of lift to the nearest floor at the time of power failure. This shall consist of suitable type battery system with charger, inverter, under voltage protection system etc. complete with all accessories.
-
-
-
IX. MINOR BUILDER WORK :
To be done by the lift contractor.
X. SCAFFOLDING WORKS :
To be done by the lift contractor.
XI. FREE SERVICE AND MAINTENANCE
DURING THE GUARANTEE PERIOD OF ONE YEAR & SAFTY CERTIFICATE
a. Guarantee : Guarantee for materials and work-manship of equipment not less than one year.
b. Free maintenance : Free comprehensive, servicing and maintenance during the guarantee period of 1 year from the date of handing over of lift to the user department and comprehensive servicing and maintenance for a further period of 2 years after 1 year of free service to be provided by the Lift contractor. Iimportant, necessary training of employees for minor maintenance works and proper handing over of lift to be done by the lift contractor.
c.Preparation of Drawings and obtaining CEIG's Safety Certificate for lift approval as per lift act with payement of necessary fees to CEIG and insurance policies. If any applicable to lift.d. Site tests in accordance with IS 14665 shall be carried out at time of handing over.
-
-
-
XII. OTHER INCLUSIONS :
Over speed Governor, phase failure and phase reversal relay, alarm bell, T. Guide brackets for car and counter weights, rubber padding under winding unit, Motor of adequate capacity,electro magnetic brake with compression springs, car safety gear, buffer, electro mechanical door locks, tubular S.S hand rail in left and right side in car. Steel ladder for machine room, Emergency key, motor over load protection devices, final limit switch, position and direction indicators for car and landing entrances, main suspension ropes, counter weights, lifting joists for mounting the machines, S.S. fascia plate for car operating panel & landing fixtures, fireman's switch and other necessary controls ,Overload Warning indicator with audio annuouncer complete set. (Johnson/ Kone/ OTIS) (SR)
-
-
-
Supply ,installation , testing and commissioning of 11TR factory assembled double skin AHU with 100mm -45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/ forward curved centrifugal fan with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 Micron and 5 Micron, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins, GI mist arrestor, condensate coil
2
-
-
trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for inspection door, out let damper of aerofoil blades & PVC gears, and flexible fire retardant canvass complete with galvanized hardware. Each of the cooling coils will have independent distributers, electronic expansion valve kit, catch all drier, independent DX coil circuit to connectivity to each ODU circuit. Appropriare devices to be installed to monitor the Temperature, Humidity and Diff. Pressure inside the Operation Theatre. (Carrier/ Voltas/ Bluestar make/ Equ.) (MR)
-
-
-
Design ,supply , installation, testing and commissioning of DX 11TR nominal capacity factory assembled Air-cooled Condensing unit fixed with energy efficient scroll compressor along with grooved copper tube/aluminium fins air cooled condensor coil with anticorrosion coatings,liquid ,accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per specification .the unit to include built in safety controls like HP/LP switch power quality protector ,in built thermal / temperature protection. (carrier make) (MR)
2
-
-
Supply and fixing of 11TR- Laminar Air flow Plenum for SS304 - 1.0 mm Thich casing, Mini Pleat Hepa Filters for 75mm Thick- Flange type, OT Pendant Light provision for 600X600, With SS304-1.2mm Thick perforated sheet. PLENUM SIZE: 1800L X 2400W X 350H High Efficiency particulate Air (HEPA) filter specification:
Filter Size : 8 feet x 6 feet x 1 feet
Classification : H-13
Construction :Panel Type
Efficiency :99.97% Optical efficiency at .3 micron
Cleanliness level: Class 100 As per NABH Standard
Spacers: Aluminium Initial pressure drop:25 mm W.C
Final pressure drop : 75 mm W.C
Duct holding capacity:4750gm/Sq.mtr
Framing :Aluminium (Box type)
Washable : No Test reports to be furnished from approved Government External Quality Assurance Lab/ Agency to meet the testing parameters after commissioning of the AC system with HEPA filter as per NABH standards. (MR)
3
-
-
Supply ,installation , testing and commissioning of 8.5TR factory assembled double skin AHU with 100mm -45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/ forward curved centrifugal fan with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 Micron and 5 Micron, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins, GI mist arrestor, condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam, guard for
1
-
-
inspection door, out let damper of aerofoil blades & PVC gears, and flexible fire retardant canvas complete with galvanized hardware. Each of the cooling coils will have independent distributers, electronic expansion valve kit, catch all drier, independent DX coil circuit to connectivity to each ODU circuit. Appropriare devices to be installed to monitor the Temperature, Humidity and Diff. Pressure inside the Operation Theatre. (Carrier/ Voltas/ Bluestar make/ Equ.) (Tech. sanctioned vide CER. No: /CBE/2023-24, Dt: )
-
-
-
Design, supply, installation, testing and commissioning of DX 8.5TR nominal capacity factory assembled Air-cooled Condensing unit fixed with energy efficient scroll compressor along with grooved copper tube/aluminium fins air cooled condenser coil with anti corrosion coatings,liquid ,accumulator, low noise alumimium propeller condenser fan with Fan motor etc all suitably assembled neatly in heavy duty GSS sheet metal cabinet and duly powder coated as per specification .the unit to include built in safety controls like HP/LP switch power quality protecton, in built thermal/ temperature protection. (carrier make)(Tech. sanctioned vide CER. No: /CBE/2023-24, Dt: )
1
-
-
Supply, Fabrication and Installation of 22 G Sheet Aluminium Ducting for both suction and Return arrangement insulate with for Operation Theatres with inter linking arrangements with necessary angle supports, anchor fasteners and threaded rods etc... as required. (MR)
120
-
-
Supply and filling of non-CFC Refrigerant Gas. (SR XIV part N 3-a )
45
-
-
Supply & fixing of hard drawn copper Refrigerant piping of suction line of Size (22.20mm) inches with necessary fitting and clamp etc…(SR XIV part N 6- M- 2050)
50
-
-
Supply & fixing of hard drawn copper Refrigerant piping of liquid line of size (15.90mm) inches with necessary fitting and clamp etc…(SR XIV part N 6- M- 2052 )
50
-
-
Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc... (SR XIV part N -3- M- 2004 )
3
-
-
Supply and fixing of 50mm thick anti vibrating rubber pads (SR XIV part N -3- M 2005 )
5
-
-
Supply and Providing Thermal Insulation of 9mm thick Class ‘O’ Fire Retardant –XLPE vidoflex with aluminium foil.(SR XIV part N -3- M -2016 )
60
-
-
Supply & fixing of Acoustic insulation for Supply air duct using 12 mm thick class 1 rating Open cell nitrile rubber /XLPE insulation. (SR XIV part N -3- M -2015 )
60
-
-
Supply and fixing of powder coated Extruded aluminium supply air grilles/diffuser with MS volume control damper for supply. (SR XIV part N -3- M -2009 )
3
-
-
Supply, fabrication and fixing of Volume control dampers individually across the duct. (SR XIV part N -3- M -2014)
3
-
-
Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required. (SR XIV part N -3- M -2010 )
70
-
-
Supply, fabrication and fixing of suitable MS angle support frame for mounting the out door Units. (SR XIV part N -3- M -2012 )
3
-
-
Supply, fabrication and fixing of suitable MS angle support frame for mounting the in door Units. (SR XIV part N -3- M -2011 )
3
-
-
Supply and providing civil concrete block for mounting the air coditioning unit (SR XIV part N -3- M -2017)
12
-
-
Supply and providing of pipeline nitrile rubber insulation for suction line Refrigerant pipe as required. (SR XIV part N -3- M -2013 )
44
-
-
Supply, fabrication and fixing of Fresh air Louver made of extruded aluminium with bird screen provided with intake louvers. (MR)
3
-
-
Sand cement plastering (1:3) of 20mm thickness with chicken mesh for external exposed portion of duct (MR )
5
-
-
Supply and providing 4 core 10 Sqmm Cu Flexible Cable in suitable Rigid Pipe on Wall (Compressor Power wiring). (MR)
50
-
-
Supply and providing 4 core 1.5 Sqmm Cu Flexible Cable in suitable Rigid Pipe on Wall (Control wiring). (MR)
50
-
-
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps/ supports on wall/ floor/ ground for earth connection. (SD-76)
30
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD-458)
59
-
-
Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.(SD-233)
12
-
-
GST
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements