Public Works Department Tender

Removing the existing vegetation growth in the building by way of uprooting the plants manually and then drilling with power driller upto the root depth of plants obtain a clean and neat drill so as to continuously inspect and remove left over roots of vegetation growth and to inject pesticides into the holes so as to prevent further growth of vegetation in future to safe guard the country old heritage building etc., the cost including the cost of pesticides used, hire charges of injecting machine for injecting chemicals, codt of tools and all labour charges etc., the above works should be carried out as per the direction of the departmental officers and complying with standard specification,

Big size ( Height of 1.20m)

Providing two legged scaffolding using 15mm dia casurina probs post of 4mm over all length (3m height + 0.50) projection + 0.50m into the ground the distance between the two rows being 1.25m and the spacing of post being 2.00m in both the row with two horizontal post with 0.50m over lap on either side sand braces at 2.00m centre to centre including longitudinal and transverse middle braces to setup and providing a platform with countrywood planks of 40mm thick and 1m width etc complete complying with standard specification and as directed by the departmental officers at site of work.

Initail 3.00M height

Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.

In Ground floor

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Vitrified Tiles of size stainfree nano polish 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Renewing and refixing the damaged aluminium anodized powder coated matt finish fully PLB partition with 63.50 x 38.10 x 1.28mm extruded box section at bottom, vertical and horizontal members. The vertical members are spaced at 80mm centre to centre to horizontal members are spaced at 0.80M, 1.60M and 2.40M height from the floor level. Panels should be covered with 9mm thick both side PLB exterior grade with necessary accessories like rubber beedings, aluminium clips, screws etc. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 specificaitons for an average wall thickness of not less than 15 microns. The rate is inclusive of cost of materials, conveyance, scaffolding charges if any required etc and necessary dismantling making holes in RCC (or) masonry works with power drill and redoing the same to the original condition after fixing the partition etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing and refixing the damaged ventilator with newone of aluminium anodized natural colour matt finish louvered ventilator. The outer frame will be 62 x 38 x 2mm @ 1.17Kg/M and th louvers with moving arrangements will be made with aluminium channel of size 60 x 30 x 4mm @ 0.27 Kg/M with necessary glass panes for louver 4mm thick aluminium clips, 'L' angles screws, nails, conveyance scaffolding if any and power consumption charges required for fabrication wherever necessary with power drill to the extent required and made good to original condition after fixing etc complete complying with standard specification and as directed by the departmental officers at site of work.The aluminium surface is matt finish under electrically controlled condition in accordance with ISI 1868 / 1962 anodic film thickness of not less than 15 microns for all sections.

Renewing and refixing country wood frame for door and window any other similar joinery works using following size of upto 4m in length Country wood scantling of pillai maruthu or patak including labour for wrought and putup in position etc., complete complying with standard specification.

Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.

Easing the existing over hanging doors and windows including renewing from its position and refixing the same after attending petty repair works including labour for wrought and put up in position fixing necessary furniture fittings excluding cost of furniture etc., complete complying with standard specification and as directed by the departmental officers at site work

Renewing and fixing Mild Steel Grills for windows and ventilators etc., including the cost of mild steel angles, plates, rods, cost of welding charges and one coat of priming coat etc., complete.(The design should be got approved by the departmental officers.)

Repainting the walls Two coats Inner Emulsion Paint through scraping approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the departmental officers.

Repainting the walls Two coats Exterior Emulsion Paint through scraping approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the departmental officers.

Repainting the old wood work two coats in all floors with best Synthetic enamel paint of approved quality, colour and brand including thorugh scrapping, sand papering and preparation of surface including cost of bruses, high scaffolding charges neat finishing etc complete complying with standard specification and as directed by the departmental officers at site of work.

Repainting the old iron work two coats of synthetic enamel paint of approved quality and colour and brand including thorough scrapping preparation of surface and finishing neatly etc complete complying with standard specification and as directed by the departmental officers at site of work.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Collecting the earth debries using tipper mechinary from works sport and dumping the same into low area to a distance of 3 km away from the site etc., complete complying with standard specification and as directed by the Departmental officers.

Total in Figures