Public Works Department Tender

Supply and fixing of LED batten with 18 W LED Tube on wall or with conduit pipe suspension from ceiling with PVC unsheathed copper leads from terminals to the fitting. (Philips / Havells/ Equivalent)

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make/equ]

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire with painting of suitable colour. (For Power DB Incoming )

Supply and run of 4 of 10 sqmm (140/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour (For Power DB Incoming )

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall with louvers

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm.PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 7 segment 4 way TNP MCB sheet steel distribution board (Higher end) with metal/acrylic door cover flush type / surface type fitted with busbars and netural links with single/ three phase MCB outgoings and separate 4 way provision of another separate 4 eay provision for accomodating one no.4 pole ELCB / RCD (totally 8 ways in oneaccomodating one no. 4 pole incoming MCB / Isolator and segment) (3X 4 ways in each segment) and separate provision for MCB / Isolator ( totally 12 nos.) for sub with the following in flush with wall earth connection only 63A 4P MCB-1 no 63 A 4P 30MA RCCB/ELCB - 1no 63A DP MCB isolator - 3nos 6A 32 A SP MCB - 12 nos.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good..

Supply and clamping of 3.5 x 120 sq.mm PVC LTUG ar. cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3.5 x 120 sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3.5 x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

Supply and fixing of brass cable gland for 4 x 16 / 2X16 sq.mm PVC armoured LTUG cable with earth connection

Supply and laying of 4x16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (For Street Lights)

Supply and clamping of 4x16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC.unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete

Supply and erection of Indoor and outdoor units of 2.0 TR capacity split type Air conditioner unit conforming to ISI 1391 ( Part - 2 ) 1992 with amendment No 1 fitted with Hermetically sealed compressor operation on 230V 50 Hz AC supply system with energy efficient operating system with refrigerant gas R - 22 suitable for high wall mounting evaporator and specification as under general requirement interconnection of pipes and cables.

Supply and erection of 5 KVA capacity Automatic voltage stabilizer suitable for operation on 230V, single phase, 50 HZ, AC supply system with time delay relay and high / low voltage cut off, input voltage range 170V to 270V AC single phase, wall mounting type with necessary clamp.

Supply and fixing of stand for the outdoor unit

Supply and laying of 5/8" and 3/8" copper pipe

Supply & Erection of 250 A wall mounting Panel board consisting the following.1) INCOMING: 250 Amps TPN MCCB in sheet steel Double break with HRC Fuses - 1 No2) OUTGOINGS: 125 Amps TPN MCCB - 6 nos 3)Bus bar chamber made up of 16 SWG Sheet steel with suitable angle iron frame work, made with 37.5mm x 37.5mm x 6.24mm Size MS angle iron complete for fixing the busbars,and MCB Isolators in suitable enclosure. 4)50mm x 6mm Tinned copper flat for 3 phases, neutral , mounted on suitable insulators / seperators. 5)2 nos 25mm x 3mm Tinned copper flat for earth flat mounted at the back to the entire length of the busbar chamber 6) Inter connections to a)250A TPN with 40mm x 6mm copper flat and b)63TPN switches with with No.6 tinned copper flat 7)All switches with 2nos. Earth connections with suitable copper. 8)All switches with adoptor box and cable entry boxes.9)Errection of the panel on wall by grouting and finishing. 10)Painting of the panel with one coat of metal primer & two coats of enamel paint. 11)Danger Board & marking of all switches. 12)2 nos. Earthing as per P.W.D.Standard.

Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 4 nos.63A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing

Supply and fixing of 2.0 KVA UPS with 2 nos 150 AH Maintenance Free Batteries with MS powder coated battery rack with necessary accessories.(Like Exide/Eq.)

Supply and run of 1 of No.8 SWG Copper wire for earth connection

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

GST at 18%