Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Aug 2024
Closing Date4 Sep 2024
Tender Amount₹ 42,13,00,000
Costs
EMD
₹ 21,20,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
250 Bedded Kalaignar Centenary Hostel At Perumugai
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_478932_1Bid Award Id
ViewTender No
6/VLR-CLE/24-25/12.08.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling of conveyed Well Gravel by lorry in basement filling including stacking for premeasurement, conveyance loading and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete as directed by the dept., Officers and complying with standard specification.
15784
-
-
Refilling in basement with excavated earth in layers of not more than 15cm thick well rammed watered and consolidated complying with standard specifications.
685
-
-
Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.
424
-
-
Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification.
443
-
-
Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental chargesetc., complete as per clause 406 of MORTH Rev-5
432
-
-
Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:3 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
For Foundation and Basement
51
-
-
Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
For Foundation and Basement
382
-
-
Brick work in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:6 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
For Foundation and Basement
153
-
-
For Superstructure In Ground Floor
469
-
-
For Superstructure In First Floor
417
-
-
For Superstructure In Second Floor
357
-
-
For Superstructure In Third Floor
345
-
-
For Superstructure In Fourth Floor
100
-
-
For Superstructure In Fifth Floor
22
-
-
Brick partition walls of Following thickness using best quality II class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three M-Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
For Superstructure In Ground Floor - 11.50cm thick
416
-
-
For Superstructure In First Floor - 11.50cm thick
475
-
-
For Superstructure In Second Floor - 11.50cm thick
410
-
-
For Superstructure In Third Floor - 11.50cm thick
340
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
2827
-
-
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
10486
-
-
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
4526
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
3469
-
-
Providing and laying in position, Standardised Concrete Mix M-20 Grade using M-Sand in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of M-sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
For Foundation and Basement
1603.5
-
-
For Superstructure In Ground Floor
610.5
-
-
For Superstructure In First Floor
469
-
-
For Superstructure In Second Floor
393
-
-
For Superstructure In Third Floor
376
-
-
For Superstructure In Fourth Floor
66
-
-
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two M-sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
-
-
-
Reinforced cement concrete precast slab 50mm thick using 20mm Jelly
59
-
-
Reinforced cement concrete precast slab 75mm thick using 20mm Jelly
674
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
4669
-
-
Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed
125
-
-
Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed
125
-
-
Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.
64
-
-
Expansion Joint filling with Polysulphide sealantupto 30mm width - Horizontal Providing and laying with two-part elastomeric fuel resistance, UV resistant, Non-toxic once cured,resistant to flame, pouring grade liquid polysulphide sealant to fill the expansion joint, Control joints in parking area, construction joint in airport runway,Tanks, bridges & concrete roads. The sealant shall have Elongation min. 450% confirms to ASTM D 412,movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 5212, BS 4254 & ISO:11600. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface before placing the sealant. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification
125
-
-
Providing and laying with two-part elastomeric UV resistant, non-toxic gun grade liquid polysulphidesealant to fill the expansion joint, sealing joints in water retaining structure. The sealant shall have Elongation min. 500% confirms to ASTM D 412, movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 4254 & ISO:12118. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface efore placing the sealant. The finished cost including surface preparation, filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely asper specification.
128
-
-
Plain Cement Concrete 1:2:4 (one cement, two M-Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
283.5
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
167
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M-Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
1848
-
-
Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be got approved by Executive Engineer before use on works)
4203
-
-
Flooring with Self design Joint free rectified Ceramic Tiles of size 305 x 305 x 8mm laid over 20mm thick cement mortar 1:3 (One cement and Three M-sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by executive Engineer before use on works)
494
-
-
Paving the floor with pre-polished concrete anti-skid tiles of size 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three M-sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
133
-
-
Paving the floor with best qualitySupplying and fixing fine polished Fine Polished Flamed Ruby Red Granite Slab 1200mm x 600mm, 16mm to 18mm Thick of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be got approved by Executive Engineer before use on works)
2400
-
-
Dadooing walls with Colour designed digital print ceramic tiles, with borders, with size of 300mm x 450mm x 8mm and above set in Cement Mortar 1:2 (One Cement and Two M-sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be like Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by Executive Engineer before use on works)
1997
-
-
Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of materials, labour and handling etc., complete complying with std.specifications.
900
-
-
Dadooing walls with best approved quality, Ruby Red / other Equalent Quality Granite Tiles 1200mm x 600mm, 16mm to 18mm Thick set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be like Johnson / Kajaria / Somany / Nitco / RAK or Equivalent which has to be got approved by Executive Engineer before use on works)
75
-
-
Supplying and Fixing marble slab for Urinal partition of 18/20 mm thick with top and bottom edges sharped to curve and fixing with cement mortar 1:2 ( One cement and Two sand ) including dismantling the existing wall and fixing the slab in position including cement slurry etc., complete complying with standard specifications.
11.2
-
-
Providing Nosing for Granite Slab with neatly finish cut edges complete complying with standard specification
638
-
-
Supplying and fixing in position best approved of BIS quality fo 160mm dia PVC rain water down fall pipes having a pressure of 4kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
340
-
-
Paving with Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain of 83 mm of approved quality and colour, over the sand filling to full depth of slab perfectly and neat finishing the joints, compressing with vibrator. The rate shall be inclusive of cost of paver block, taxes, incidental charges, transportion charges and labour charges for fixing, neat finishing the joints as directed by the departmental officers etc., complete complying with standard specification. The paver block should got approved by the departmental officers before use on work.
4308
-
-
Supplying and fixing inposition Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., The door frame inner shall be packed with CC 1:2:4 using 12mm guage HBG stone jelly including fixing the door frames inposition and dimantling the masonry and concrete wherever necessary and redoing the same original condition after fixing including scaffolding charges and labour charges and door frame will be given one coat of Red Oxide primer etc. Complete complying with standard specification The rate shall inclusive of all materials, labour, transportation, loading, unloading, handling, charges etc. The sample of materials should be got approved by the Exe. Engineer before use on works.
918.8
-
-
Supplying and Fixing Teakwood Entrance Door with a size 5.40m x 2.90m with four leaves as per the design approved by the departmental officers. The outer frames are one horizontal and four verticals of size 150x100mm scantlings. Shutter frames are 100x50mm scantlings. The shutter shall have 2.40m hight with two panels having 1/3 at bottom and 2/3 at top. The panels shall be 40mm thick Teakwood planks. The shutter shall have 4 leaves of equal size and openable. The top 2/3 shall be MS Grill of approved pattern and bottom 1/3 shall be teak wood planks of 40mm thick and finished with approved pattern with skilled carpentar as directed by the departmental officers. The top portion shall be covered with plain glass of 8mm thick. The rate includes cost of best and approved quality of Teakwood, Teakwood reeper 50x25mm, Brass hnges, Tower bolt, Aldrop, locking arrangements, Ornamental Handles, brass screws and labour charges for handlings, fixing charges, conveyance charges etc., The door frame and shutters shall be given two coats of best and approved quality of Lac polishing etc. complete complying with standard specifications.
11.4
-
-
Supplying and fixing of Solid core Flush shutters with Teak ply on both side with teak wook lipping alround 35 mm thick conforming to I.S.12406\1989 with 35x12mm T.W. lipping on all edges with necessary adhesive and C.P.Screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish, for T.W. lipping thinner colouring agent etc, and aluminium anodised 125mm size hinges 3 nos best quality of aluminium anodised fittings of 200 mm, tower bolt 1 no 150mm tower bolts 1 nos, 250mm aldrops 16mm dia rod 1 no 125mm long handle 2 nos 40mm dia nylon bush 1no, door stoper 1 No shall be provided. The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidental charges handling charges etc., complete complying with standard specification. The sample of materials and fittings should be got approved by the Engineer-in-charge before use on works. (Single leaf)
319
-
-
Supplying and fixing Solid core Flush shutters with Teak ply on both side with teak wook lipping alround 35 mm thick shutter conforming to I.S. 12406/1989 with external teak wood lipping of size 35x12mm on all edges with necessry adhesive and C.P. Screws, including fixing for aldrop, tower bolt, hinges and lock strike plates, putty, fevical, painting the teak wood lipping etc., and including the cost of alumnium hinges 125x30mm size - 6 Nos. aluminium aldrop of size - 250x16mm 1No , Aluminium tower bolt of size 250x12mm -2 No , tower bolt of size 200x12mm -1 No, D type aluminium handle of size 200mm -2 No , aluminuim door stopper with Nylon bush - 2 No . shall be provided. All aluminium furniture fittings are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less than 15 microns. The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all other incidental charges, handling charges, etc., complete complying with standard specification. ( Double leaves )
14.5
-
-
Supplying and fixing 28mm thick WPC Door Shutter with WPC frame of size 75 x 60mm with suitable rebate for housing the shutter,including cost of all furniture fittings such as aluminium aldrop of size 250 x 16mm-1 No., aluminium tower bolt 250 x 12mm-1 No., aluminium 'D' type handle 200mm-1 No., etc., complete, as directed by Departmental Engineer and drawing.
288.56
-
-
Supplying and fixing 30mm thick solid core PVC Sliding door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter (Conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness and size of 19 x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C' channel of size 30 x 50mm forming styles, and 75x50mm for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2) thick 20mm wide cross PVC sheet as gap insert for top rail, bottom rail. Paneling of 5mm thick PVC sheet bearing on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the ‘C' channel using PVC sealant adhesive including cost of all furniture fittings such as aluminium aldrop of size 250x16mm - 1No., aluminium tower bolt 250x12mm - 1No. aluminium D type handle 200mm etc. complete, as per direction of Engineer in charge and drawing. (Sliding arrangements with roller)
4.2
-
-
Manufacturing, supplying and fixing of Steel doors with following specification. MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos, for shtter is provided. 6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door. Tower bolt 2 Nos. at the top provided. 250x16mm size of Two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of M.S. handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete. (Single Leaf)
10.1
-
-
Supplying and fixing of rolling shutters shall be pull and push type made of 18/Gx3" lath sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below:Curtain shall be of 18/Gx3" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8' 0" (2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be of 10 GMS sheet reinforced with 40mm x 6mm MS angles at the bottom and fitted with heavy latches and locking arrangements on either sides. There should be one handle on either sides. Guide channel pressed guide channels shall be 10GMS sheet and attached to the side brackets with 20mm square bar. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mm x 25mm x 3 mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer.
18
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
537.5
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
91.8
-
-
Supplying and fixing in position of Stainless Steel fly proof mesh openable shutter for Window using country wood frame of size 75x50 mm and country wood styles of size 50 x 40 mm of good quality including labour for wrought and putup fixed with stainless steel fly proof mesh with teak wood beading of 12 x 15 mm including fixing of furniture fittings etc., complete as directed by the departmental officers.
541
-
-
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.
300
-
-
Supplying and fixing of M.S.grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.
14035
-
-
Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve Noise reduction coefficient Not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.
4100
-
-
Providing Cornice Work for Gyp Board False Ceiling as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.
4050
-
-
Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.
579
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
264.86
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
15.8
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M-Sand) 10mm thick with plasticizer including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.
7152
-
-
Supplying and applying of Two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the departmental officers. (The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet) cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc., complete). The putty should be got approved by the Executive Engineer before use on work.
8730
-
-
Plastering with Cement Mortar 1:5 (One cement and Five M-sand), 12mm thick with Plasticizer in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
22243
-
-
Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three M-sand), 20mm thick with Plasticizer in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.
3896
-
-
Plastering with Cement Mortar 1:3 (One Cement and Three M-Sand) 12mm thick with Plasticizer mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
726.4
-
-
Providing granolithic floor finish of the 40mm thickness with plain cement concrete 1:2:4 (One Cement, Two M-sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
246
-
-
Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
18230
-
-
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.
31
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
23267
-
-
Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
11704.83
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
685
-
-
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two M-sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
9
-
-
Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
138
-
-
Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
16
-
-
Supplying and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
142
-
-
Supplying and fixing in position SS Heavy Duty Long Body Tap 15mm of approved make and quality with approved brand (Jaguar, Parryware, ESS, Kohler, cera or equlent) the cost including labour charges for fixing, fittings etc., complete complying with standard specification and as directed by the departmental officers. (The Tap and specials should be got approved by the Executive Engineer before use on works).
165
-
-
Supplying and fixing in position SS elbow Action tap 15mm dia of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
135
-
-
Supplying and fixing in poisition of CP Wall Mixture Tap 3 in 1 system with Hand Showers in with standard specification, including cost of materials conveyance etc., with standard specification. (Wall Mixture Tap should be got approved by the Executive Engineer before use on the works)
135
-
-
Supplying and fixing in poisition of Good Quality Stainless Steel Health Faucet including cost of materials conveyance etc., with standard specification. and as diceted by the deaprtmental officers.
136
-
-
Supplying and fixing position CI Nahani Trap of sizes 100x75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of M-sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three M-sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
112
-
-
Supplying and fixing in position of SFRC manhole cover slab of size 90cm x 90cm of best approved quality as per standard specification etc., complete compying with standard specifications
41
-
-
Supplying and fixing of CI PVC moulded Steps for Sump including cost of material and labour chares ,etc., and as directed by departmental officers.
21
-
-
Supplying and fixing approved best quality Stainless Steel Towel Rack 600 mm Long with lower hanger including screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
139
-
-
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
274
-
-
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
139
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
135
-
-
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers.
1
-
-
Supplying, laying and jointing UPVC pipes of approved quality and best variety of the following dia including labour for fixing UPVC Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete etc., complete complying with standard specification. The UPVC pipes shall be got approved by the Executive Engineer before use on work. (The earth work excavation, re-filling the trench with excavated earth, sand filling, etc., shall be measured and paid separately under respective items). Below ground level (External Water Supply)
-
-
-
32mm dia UPVC pipe
60
-
-
25mm dia UPVC pipe
45
-
-
20mm dia UPVC pipe
40
-
-
Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (External Water supply)
-
-
-
32mm dia UPVC pipe
320
-
-
25mm dia UPVC pipe
488
-
-
20mm dia UPVC pipe
468
-
-
Supplying and fixing in position of the following UPVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the UPVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The UPVC specials should be got approved from the Executive Engineer before use on works).
-
-
-
32mm dia UPVC Tee
68
-
-
32mm dia UPVC Bend
93
-
-
32mm dia UPVC Elbow
115
-
-
32mm dia UPVC Union
50
-
-
25mm dia UPVC Tee
95
-
-
25mm dia UPVC Nipple
100
-
-
25mm dia UPVC Elbow
168
-
-
25mm dia UPVC Bend
90
-
-
25mm dia UPVC Union
50
-
-
20mm dia UPVC Tee
97
-
-
20mm dia UPVC Nipple
50
-
-
20mm dia UPVC Elbow
125
-
-
20mm dia UPVC Bend
72
-
-
20mm dia UPVC Union
40
-
-
32 x 25 mm dia UPVC Elbow
93
-
-
25 x 20 mm dia UPVC Elbow
96
-
-
20 x 15 mm dia UPVC Elbow
110
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
20mm dia Gun Metal Gate Valve
20
-
-
25mm dia Gun Metal Gate Valve
39
-
-
32mm dia Gun Metal Gate Valve
18
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
160mm dia PVC soil / waste pipe
440
-
-
110mm dia PVC soil / waste pipe
457
-
-
75mm dia PVC soil / waste pipe
519
-
-
Supplying and fixing in position of the following PVC specials best approved quality conforming to ISS and providing leak proof joints with PVC adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The PVC specials should be got approved from the Executive Engineer before use on works).
-
-
-
160mm dia PVC Bend
60
-
-
160mm dia PVC Tee
40
-
-
160mm dia PVC Elbow
80
-
-
110mm dia PVC Bend
66
-
-
110mm dia PVC Tee
48
-
-
110mm dia PVC Elbow
92
-
-
75mm dia PVC Bend
56
-
-
75mm dia PVC Tee
38
-
-
75mm dia PVC Elbow
62
-
-
160mm dia PVC Y
40
-
-
110mm dia PVC Y
26
-
-
75mm dia PVC Y
46
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
Upto 150 RM
450
-
-
From 151 RM to 180 RM
90
-
-
From 181 RM to 210 RM
90
-
-
From 211 RM to 240 RM
90
-
-
From 241 RM to 270 RM
30
-
-
Supply of 160 mm PVC Special Blue Casing pipe of best approved quality etc complete as directed by the departmental officers. The pipe should got approved by the Executive Engineer before use on works.
120
-
-
Supplying and fixing the P.V.C. end cap of 160 mm dia at the end of P.V.C. casing pipe etc., complete complying with standard specification. The bore cap should be got approved by the Executive Engineer before use on works
3
-
-
Supplying and fixing 50mm dia UPVC Threaded type pipe (Ashirwad Make) for sub-mergible pump in Bore well of best approved quality including welding wherever necessary etc., complete as directed by the Executive Engineer. The pipe should be got approved by the Executive Engineer before use on works.
630
-
-
Supplying and fixing 5 HP / 3 Phase, 9 Stage sub mergible pump of approved make and quality with ISI mark with necessary accssories and fixed with delivery pipe errected in the borewell with necessary clamp etc., with following additional accssories
1 No of 3 Phase Star Delta Starter of 63 AMPS of approved quality and make with ISI mark
1 No of 3 Phase 63 AMPS Main Switch of approved quality and make with ISI mark.
1 No of priventor of approved quality and make with ISI mark
1 No of pannel board of required size with indicator fuse unit voltmeter with necessary provision toaccomodate the starter and mini starter etc.
1 No of capacitor with board as per standards of TNEB
3
-
-
Supplying and fixing single phase 5 HP Monoblock pumpset as per I.S.I. specification on suitable pedestal with foundation bolt and nut including labour. Supply and fixing of starter and main switch suitable for 5 HP pumpset on suitable angle iron frame work with necessary labour including panel board. Supply and fixing 1 No. foot valve 2" for the 5 HP Mono block pumpset supply and run of 4 of 10 sq.mm. in PVC pipe with 14 SWG TC wire etc., complete.
2
-
-
Supplying of PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT FLEXIBLE COPPER CABLE (25 sq.mm.) WITH ISI MARK CONFORMING TO IS specifications etc., complete as directed by the Executive Engineer. The Rope should be got approved by the Executive Engineer before use on works.
600
-
-
Supplying and tying of Nylon rope of 15mm dia thread make with best quality of Nylon rope etc., complete as directed by the Executive Engineer. The Rope should be got approved by the Executive Engineer before use on works.
600
-
-
Supplying and filling of 40mm ISS metal in dispersion trench around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the departmental officers etc. complete. (The rate including cost of metal filling etc., complete complying with standard specification.
23
-
-
Supplying and filling of 20mm ISS metal in dispersion trench around the stoneware pipe or in the leach pit or soak pit to the required thickness as directed by the departmental officers etc. complete. (The rate including cost of metal filling etc., complete complying with standard specification.
28
-
-
Supplying, fixing of cylindrical vertical notational polythene water storage tank of 1000 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., ( The water tank should be got approved by the Executive Engineer before use on works)
12
-
-
Supplying and erecting in position of 500 litres capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No., (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set, (c) Feed Pump 0.50 HP – 1 No., (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No., (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos., (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact
4
-
-
Supplying and Fixing of Tamil Brass letters of size 25cm. The brass letters are should got approved by the executive engineer.
45
-
-
Supplying and Fixing of English Brass letters of size 25cm. The brass letters are should got approved by the executive engineer.
71
-
-
Providing and Fixing of Brass Tamil Nadu Government Emblem of size 45cm (15") dia in position of best quality special approved variety for name board including moulding, grinding and neatly finishing to all edges to letter conveyance charges bolts and nuts, paste and scaffolding charges the same in position etc., complete.
2
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc,
1773.36
-
-
Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.
-
-
-
Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.
-
-
-
Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.
-
-
-
Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.
-
-
-
Supplying and fixing Incinerator for Ladies Bathroom as per standard specifications and as directed by the departmental officers
16
-
-
Supplying and Placing of 3'6" single seater one number (Half Leather Finishing) the Structure is inside will be made in teak wood and outer side fibre covering on top the seat shall have 32 density DURO foam and PU materials and leatherite as per room decor. The body will have full fabric covering leatherite fabric with back cushions in fiber. The wood shall be fully treated and seasoned solid wood Sheesham. Including cost all charges transporation and erection charges etc., complete and as per the standard specification.
12
-
-
Supplying and Placing of Sofa sets of 7'6" Three seater one number (Half Leather finishing) 5'0" Two seater one number and 3'6" single seater one number the Structure is inside will be made in teak wood and outer side fibre covering on top the seat shall have 32 density DURO foam and PU materials and leatherite as per room decor. The body will have full fabric covering leatherite fabric with back cushions in fiber. The wood shall be fully treated and seasoned solid wood Sheesham. Including cost all charges transporation and erection charges etc., complete and as per the standard specification.
12
-
-
Supplying and placing of Tea table of size 3'0" x 2'6". Top shall be constructed out of 18 mm thick facia of Seasoned teak wood flush jointed planks with 8 mm tempered glass on top. The legs shall be of size 3" x3" with the 2" x 18mm frame. The wood shall be treated and kiln dried . All the wood joints are joined with adhesive of D3 grade and the adhesive shall be water resistant to BSEN204 Group D3 ensuring bond security under adverse conditions. The polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non-visible timber surfaces finished with wax polish. Including cost all charges transporation and erectiong charges etc., complete and as per the standard specification. Including cost all charges with transporation and erection charges etc., complete and as per the standard specification.
250
-
-
Supplying and placing of 1'6"x1'3"x1'6" bed Side table top shall be constructed out of 16 mm thick facia of Seasoned Particls board flush jointed the polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non-visible timber surfaces finished with wax polish. Including cost all charges with transporation and erectiong charges etc., complete and as per the standard specification.
250
-
-
Supplying and Placing of King size bed cot (Deluxe) of size 6'0" x 6' 6" is made up of fully seasoned and treated head board and tail board Teak wood finish. It has no storage and drawer back is made in teak wood planks with gap of one inches. It is also made in fully treated and seasoned Teak wood All visible area will be in Teak wood the centre of cot 4 nos TW bars of size 4" x 2" and top laid with the bed of 2 mm thick will be in ply wood board etc. The wood shall be treated and kiln dried . All the wood joints are joined with adhesive of D3 grade and the adhesive shall be water resistant to BSEN204 Group D3 ensuring bond security under adverse conditions. The polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non visible timber surfaces finished with wax polish. Including cost all charges transporation and erection charges etc., complete and as per the standard specification.
6
-
-
Supplying and placing of foam Mattress The mattress shall be of size 78" x 72" x 6" having pocked spring Zero disturbance and organic cotton fabric with good sleep and good bounce effect and special hardening to have extra support. Including cost all charges transporation and erection charges etc., complete and as per the standard specification.
6
-
-
Supplying and placing of Teak Wood Dressing Table of size 3ft x 7 ft top and sides shall be constructed out of 16 mm thick facia of Seasoned Particls board flush jointed the polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non-visible timber surfaces finished with wax polish. Including cost all charges with transporation and erectiong charges etc., complete and as per the standard specification.
13
-
-
Supplying and Placing cot of size 4'0" x 6' 6" is made up of fully seasoned and treated head board and tail board Teak wood finish. It has no storage and drawer back is made in teak wood planks with gap of one inches. It is also made in fully treated and seasoned Teak wood All visible area will be in Teak wood the centre od cot 4 nos TW bars of size 4" x 2" and top laid with the bed of 2 mm thick will be in ply wood board etc. The wood shall be treated and kiln dried . All the wood joints are joined with adhesive of D3 grade and the adhesive shall be water resistant to BSEN204 Group D3 ensuring bond security under adverse conditions. The polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non visible timber
262
-
-
Supplying and placing of foam Mattress The mattress shall be of size 78" x 60" x 6" having pocked spring Zero disturbance and organic cotton fabric with good sleep and good bounce effect and special hardening to have extra support. Including cost all charges and erecting charges etc., complete and as per the standard specification.
346
-
-
Supplying and placing of VIP Chair of Seasoned Particls board flush jointed the polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the undersides or non-visible timber surfaces finished with wax polish. Including cost all charges etc...
330
-
-
Bed Spread, Bed Sheets of King size and Queen sizes Pillows for VVIP and VIP rooms
262
-
-
Manufacturing and supplying of T.W. Table of size: 5' x 3' x 2'.6" one side with a cupboard and with three drawers and on the other side. The top made out of 18 mm commercial plywood pasted with 1 mm thick laminated sheet with T.W. lipping. T.W. foot rest will be fixed. Drawers made out of T.W. Scantligs. All wooden portion with polish finish etc. Complete.
50
-
-
Manufacturing and supplying of Teak wood Wardpore of size 1210 x 600 x 2000. Using 20 mm thick Teak wood planks of three sides and front teak wood plank used for openable shutters including all furniture fittings, nails, fevical etc, complete and All wooden portion with best quality and approved variety of lac polish finish. The cost includes cost of all materials, labour, erection and all other incidental charges etc., complete complying with standard specification as directed by the departmental officers
139
-
-
Supplying and fixing the best quality and approved vareity ISI mark vertical blinds premium including labour charges for fixing etc., complet as directed by the departmental officers.
894
-
-
Supplying and placing of cutleries and crackeries for the following items etc., (The cutleries and crackeries items are should be got approved by the Executive Engineer before use on works).
-
-
-
S.S. Kothu Kinnam with Cover
16
-
-
S.S. Basin
16
-
-
S.S. Tiffen Carrier (Big)
16
-
-
S.S. Tiffen Carrier (Small)
16
-
-
Brass Anda
36
-
-
Brass Kuvalai
36
-
-
Iron Dosaikkal
16
-
-
Induction Electric Stove
2
-
-
Salt Pepper Stand
50
-
-
Coffee Flask
50
-
-
Cooker
2
-
-
Ash Tray
50
-
-
Prestige Mixer
2
-
-
Plastic Bucket
280
-
-
Plastic Waste Paper Bucket
283
-
-
Plastic Mug
280
-
-
Water Jug
286
-
-
Steel Karandi
20
-
-
S.S. Annakuthi
24
-
-
S.S. Plate (Medium)
280
-
-
S.S. Spoon
20
-
-
S.S. Thumbler
20
-
-
S.S. Hot Box (5 Adukku)
20
-
-
S.S. Hot Box (Single)
20
-
-
S.S. Tray
50
-
-
S.S. Cup & Souccer
280
-
-
Electric Kettle
100
-
-
Glass Tumbler
60
-
-
Earthenware Plate
100
-
-
Supplying and fixing in position of Kitchen Equipments with the following ISI Standard including labor for fixing the specials. The rate includes scaffolding charges, transportation charges etc., The pipe line should be tested as per ISI specification etc., complete complying with standard specification. Civil Work and Plumbing Work shall not be Supported Steam Boiler Inner Made Of 12swg Ss Sheet And Outer Double Jacketed Made Out Of 6 & 8 Mm Ms Sheet. The Steam Boiler Consist Of The Following Accessories. Steam Boiler Capacity 350 Lt. Per Hour Steam Evaporation 40 Lt. Steam Pressure 5 Psi. Gauge Glass Assembly ,Safety Valve, Drain Valve, Water Inlet& Out Let And Valve For Steam Out Let. Per Hour Steam Evaporation 126 Lt .Multi Purpose Steam Boiler-Gas Operated. Water Capacity 350 Lt Hsn Code;7321
1
-
-
Supplying and fixing in Multi Cooking Vessel Fabrication On 16swg Stainless Steelaisi304 Grade Quality Cold Rolled Sheet Of Cylindrical Shape. The Bottom Portion Is With Filter Plated With Perforated Holes To Allow The Steam To The Vessels. The Stainless Steel Pipe 1”Od Is Welded From The Bottom To Gland Packing Is Also Provide With Stainless Steel Nipple And Brose Plated Check Nut For Leak Proof And Tilting Operation. A Bakelite Knob Is Provided For Easy Tilting Operation Of Vessel To Collect The Items. The Drain Valve(3/4”Bsp) Is Also Provided To Drain The Condensed Water After Cooking. The Entire Vessel Is Mounted On The Tubular Ss Frame. With Tilting Operation. The Vessel Should Be Serially Arranged To The Main Steam Pipe Line With Control Valve Of 3/4” Bsp And With All Ss Fittings. Vertical Legs; 2” Ss 14swg 304 Qulity Ss Squire Pipe With Crose Leg Support 1” Ss 16swg Squire Pipe
2
-
-
Supplying and fixing in Open Mouth Cylindrical Shape Double Jacketed Vessels Made Out Of 16 Swg Salem Stainless Steel Sheet 304 Quality. Side Rod Solid Stainless Steel . Tilting Handle With Lid, Safety Valve Fitted On Vessels Can Be Boiled In With Out Burning At Bottom. The Steam Does Not Mix With The Inner Vessels. So The Quantity Of The Inner Container Will Be Constant As We Poured Earlier. It Is Mounted On Ss Stand. S S Milk Cooker Ss Stand. Capacity; 100lt
2
-
-
Supplying and fixing in Idli Cooking Plant Inner And Outer Made Of 18 Swg Aisi304 The Door S Are Fitted With Heat Resistance Rubber , With Ss Hinges. Pressure Valve Arrangement Is Made To Control Steam Through The Pipe Line. Electroplated Brass Door Handles Are Fitted To Closed And Open The Doors. Arrangements Are Provided To Drain Condensed Water From Each Chamber Through Outer Body. Each Chamber Can Accommodate There Idli Trays And The Chambers Are Fitted One Above Another. The Steam Pipe Lines Internally Connected To Control Each Chamber Individually.The Outer Body Made Out Of 1mm Ss Sheet Of Aisi 304 Quality. Operated Idli Trays Are Provided To Bake Idly Etc.The Entire Plant Is Mounted On An Ss Angle Frame For Convenient Operation. Capacity; 240 Iddlies,Chambers; 4 Chambers,Idly Tray ; 12 Nos, Hsn Code: 7323
2
-
-
Supplying and fixing in Capacity ;10kg Capacity Unit Fabricated With 3 Mm Ms Sheet And Duly Painted With Inner Warm Gear Attachment With 16 Swg Ss Bowl And Ss Arm 1hp 3phase Motor Attachment With Belt Guard Arrangement.10kg Capacity Dough Kneading Machine 2hp Single Phase Motor
1
-
-
Supplying and fixing in position of Kitchen Equipments with the TWO BURNER GAS RANGE over a size 48" x 24' x 18" ISI Standard including labour for fixing the specials. The Rate includes scaffolding charges, transportation charges etc., The pipe line should be tested as per ISI specification etc., complete complying with standard specification. Civil work and Plumbing work shall not be supported. (i) Top - made out of 16swg SS sheet. (i) Rear & 2 sides - Covering with 20swg SS sheet. (iii) Front panel - Covering with 18swg SS sheet. (iv) Frame work - 1 1/4 x 1/4 ms angle frame work. (v) pan support - 2 no cast iron pan support. (vi) verticals - 11/2" od 16swg SS pipe (vii) Burners - 2 no T-35 burner intel make. (viii) NC valve - 2 nos intel make. (ix) Copper pigtail - 2 nos. (x) Inner pipe - 20" TATA C Class pipe with fittings.
1
-
-
Supplying and fixing in position of Kitchen Equipments with the SINGLE BURNER GAS RANGE over a size 24" x 24' x 18" ISI Standard including labour for fixing the specials. The Rate includes scaffolding charges, transportation charges etc., The pipe line should be tested as per ISI specification etc., complete complying with standard specification. Civil work and Plumbing work shall not be supported. (i) Top - made out of 16swg SS sheet. (i) Rear & 2 sides - Covering with 20swg SS sheet. (iii) Front panel - Covering with 18swg SS sheet. (iv) Frame work - 1 1/4 x 1/4 ms angle frame work. (v) pan support - 2 no cast iron pan support. (vi) verticals - 11/2" od 16swg SS pipe (vii) Burners - 2 no T-35 burner intel make. (viii) NC valve - 1 no intel make. (ix) Copper pigtail - 1 no. (x) Inner pipe - 20" TATA C Class pipe with fittings.
1
-
-
SS WORK TABLE top 18 g 304 Grade bottom shelf 20 g inner stripner 18 g ,legs mounted 1 ½ Square tubes with adjustable nylon legs
1
-
-
Supplying and fixing Gas connection pips
-
-
-
5 Cylinder manifold
2
-
-
Manifold clamp
4
-
-
Valve
2
-
-
DBC Flexible
1
-
-
2' CPT Black
11
-
-
click an adapter
10
-
-
NRV
10
-
-
30 PSI Regulator High Pursue
1
-
-
½ Main Valve
4
-
-
½ Elbow
15
-
-
½ Tee
8
-
-
½ pipe clamp
40
-
-
4’ CPT BLACK
6
-
-
½ X ½ NCV
1
-
-
T-78 BIG Full Burner set With Stand
1
-
-
4” feet 3/8 Copper
1
-
-
½ MS Pipe “C “ Class ERW ( meter )
30
-
-
½ X ½ adapter
4
-
-
Renewing and supply of Dosa or Chaoathy plate of size 3' x 2 x 20mm thick MS plate with stainless steel stand of size 3x2. The stand legs are made up of 11/2", 16SWG stainless steel pipe, the side frames are made up of 16swg stainless steel sheet and, moulding 2 no v type burner. 25 mm Dia PVC Pipe
1
-
-
Supplying and fixing in Grinder 10 Litres Capacity. Unit Frame Made Out Of Ms Angle With Top And Four Sides Covering With 22 Swg Ss Plated. The Unit Connected With 1 Hp There Phase Motor With 1 Nos. With Grinder Drum Made Out Of 20 Swg Ss Sheet With Full Stone With Post And Handles Chromium
2
-
-
Renewing ,Supply and fixing of steam pipe line hid of 25mm dia c” class MS pipe line with 6mm thick asbestos rope .The rate including the cost of brass steam valves, NR Valves, Elbow ,TEE. Reducing Elbow,Gatevalve ,union etc
17
-
-
Supplying and fixing the MS-Channel /MS Angle /MS square or rectangular hollow section of various sizes for Rafters , purlins, clits , shed posts etc., Including labour charges for petty iron work for fixing with one coat of red oxide primer etc.,complete.
2902
-
-
Supplying and fixing PPGL pre painted culvenised sheet roofing with 0.47mm of approved quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete
270
-
-
Penta Washer Extractor 30kg Fully Automatic PWE-30, 30kg cap. Electrical heated 12 kw, fully automatic with micro processed control 4 program and variable frequency drive,7.5hp motor, auto temp, auto program, auto water level control etc.
1
-
-
Penta Drying Tumbler 30kg PDT-30, 30kg cap, drive motor 0.75kw, blower motor 0.75kw, main door opening 36RPM, electrical model 18kw, approx. wt. 550kg
1
-
-
Penta Stream Press 2 Table with 1 Boiler
1
-
-
Penta Flat Work Ironer, Roller size-300x1800, Drive motor 0.75kw, Suction motor 0.75kw, Electrical model 9/12kw, Overall dimension-2900x700x1100, Approx. wt. 750kg
1
-
-
Penta Lienen Trolley Complete SS304 36x24x24 Inch’s
4
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.
-
-
-
100mm dia
180
-
-
80mm dia
12
-
-
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
220
-
-
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
24
-
-
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
4
-
-
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)
8
-
-
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)
8
-
-
Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
1
-
-
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers
1800
-
-
Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT
8
-
-
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT
8
-
-
Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainles steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.
16
-
-
Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
8
-
-
Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
8
-
-
Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KIARTAR / OMEX / EQUIVALENT.
1
-
-
Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
2
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’,gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR /EQUIVALENT
5
-
-
Supply, erection, testing and commissioning of 180 LPM, 70 metres Head Pressurization Pump with 10HP electrical motor of Kirloskar make with suitable base frame including necessary vibration bad mounting etc., including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers. Make:KIRLOSKAR / EQUIVALENT. ( Terrace Booster pump )
1
-
-
Supply, erection, testing and commissioning of Fire Fighting Application direct on line main control panel to control electrical Terrace Pump Motor of 3.75 KW / 5 HP rated 415 volts / 50 Hz 3 phase, 2880 RPM including necessary auto / manual operations, over load relay, selector switches arrangements, voltmeter and ammeter provision, etc., as directed by the Departmental Officers.
1
-
-
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
1
-
-
Supply and laying of following sizes of Armoured Aluminium /Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.
-
-
-
3 core 10 sq.mm. armoured copper cable
120
-
-
2 core 1.5 sq.mm. armoured copper cable
120
-
-
Supply Of 6Watts 2in1 unit, Speaker (LMTbased) cumTalkback unit, press to talk switch,MS housing
4
-
-
Supply Of 24 zone Advance Microcontroller based PASCum talkback panel with inbuilt 160watts Amplifier
1
-
-
2 Core 1.5 sqmm Armored Copper Cable
600
-
-
Design, Supply, Erection and Commissiong of 200 KLD STP with MBR Technology including Civil and Electrical works such as Mechanical coarse screen, Raw sewage transfer pump, collection tank, sewage transfer pump, equilization tank, rotary drum screen, Aeration tank & equilization tank, MBR Tank, MBR Membrane, MBR Permeate pump, Dilution pumps, CIP Pumps & tanks, Sludge Transfer pump, Centrifuge feed pump, Instruments, Innerconnecting pipes & Valves, Floor mounted electrical panel & Cabling, Non compartmentalized - common for STP, PLC for entire plant etc., including operation and maintenance for 3 years.
1
-
-
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe ( 2way light points) Higher End)
462
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil)
1231
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil)
274
-
-
Supply and fixing of 20A DP Energy Saving Switch with Key Tag in flush with wall with earth connection.
132
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall
139
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan
139
-
-
Supply and fixing 9W/10W Round LED Fitting (Bath & Toilet)
135
-
-
Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch. (Only Room)
132
-
-
Supply and fixing of Aesthetically desined ultra modern 20W mirror light with PVC unsheathed leads from terminals to the fitting. (Havels / Equivalent )
132
-
-
Supply and fixing of Aesthetically desined ultra modern Foot lamp light with PVC unsheathed leads from terminals to the fitting. (Havels / Equivalent) (For Foot light) ( only Bed)
132
-
-
Supply and fixing of single box type 20 W 2ft LED fitting complete with on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. ( Havells /Crompton/equivalent)
128
-
-
supply and fixing of 24W LED 1x1 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC usheathed copper leads from terminals to the fitting.
690
-
-
supply and fixing of 34W LED 2x2 square type Recessed fitting with LED on false Ceiling with suitable hanging support from ceiling with PVC usheathed copper leads from terminals to the fitting.
68
-
-
Supply and fixing of single box type 4' 20 W LED fitting complete with TW round blocks on wall or ceiling with 20 W LED tube light with Single side connection with PVC unsheathed Copper leads from terminals to the fitting. ( Havells /Crompton/equivalent)
98
-
-
supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300mm down rod with necessary clamps
317
-
-
Supply and Installation of 43 inches LED TV with following features:1. USB Input 2.HDMI Port 3.Clear audio 4.Full HD 1080 Make:SONY/Eq. with stand and Stablilzer
132
-
-
Supply and fixing of DTH facility including cable to all the Room by Providing Separate Set of box wiring and Antenna arrangements to all the rooms in all the floor of A and B Block. at ( 138 Rooms)
1
-
-
Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work
132
-
-
Supply and erection of Direct cool single door refrigerator with a capacity of 183 litres with following specifiations :Annual energy consumption 104 KW Hours Compressor - The refrigerator comes with reciprocatory compresssor that is ideal for optimum cooling (AtKitchen)
1
-
-
Supply and fixing of 1 no. Two module 15A socket and 1 no 20A DP MCB with suitable module surface mounting Box (Plastic) with module cover plate (plastic) concealedon wall with connections. Higher End (For Water Heater )
135
-
-
Supply and fixing of 1 no 12/16 modular metal box with 1 no 12 modular plat , 2 no 6A switch , 2 no 6A socket ,2 No 16A Socket , 2 no 16A switch and 2 Nos Dummy Swicth in flush and making good of the wall portion for computer plug (Legrand /Hager /Equivalent) ( For Rooms Power plugs)
557
-
-
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End ( For A/C Indoor Plugs)
138
-
-
Supply and fixing of 100 A FP MCB in sheet enclosure with SMC Box on wall with earth connection (AC Outdoor Unit)
15
-
-
Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 3 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End ( At VIP Rooms )
6
-
-
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only ( For Main Lobby and Corridor )
9
-
-
Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
45
-
-
Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
16
-
-
Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour
19500
-
-
Supply and run of 4 of 10 sq.mm (140/0.3) PVC insulated SC unsheathed FRLS Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 10sqmm cu. wire and making good of the concealed portion with suitable colour. ( From Panel to Vertical DB's)
3300
-
-
Supply and run of 4 of 16 sq.mm (101 / 0.45 PVC insulated SC unsheathed FRLSu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16sqmm cu wire and making good of the concealed portion with suitable colour. ( From panel to A/C Outdoor Units)
1200
-
-
Supply and clarnping of 3.5x70sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
200
-
-
Supply and frxing of brass cable gland for 3 1/2x70sqmm PVC armoured LTUG cable with earth connection
8
-
-
Supply and providing cable end termination of 3-1/2x70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
8
-
-
Supply and frxing of brass cable gland for 3 1/2x150 sqmm PVC armoured LTUG cable with earth connection
30
-
-
Supply and clarnping of 3.5x150sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. ( From Main Panel to Floor Wise panel and panel to Laundry)
300
-
-
Supply and laying of 3.5x150sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
50
-
-
Supply and providing cable end termination of 3-1/2x150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
30
-
-
Supply and frxing of brass cable gland for 3 1/2x240 sqmm PVC armoured LTUG cable with earth connection
4
-
-
Supply and clarnping of 3.5x240sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. ( From Main Panel to 400A A/C panel and Panel to STP Plant)
50
-
-
Supply and laying of 3.5x240sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
100
-
-
Supply and providing cable end termination of 3-1/2x240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
4
-
-
Supply and laying of 2 runs of 31/2 x 300 sqmm size of PVC armoured LTUG cable in a trench tobe excavated at a depth of 0.75 Mtr. And puttin 0.15 mtr. layer of sand and covering the cable completely with concrete trough and sand and refilling the earth to make good. ( From HT Room to 630 A Panel Board)
300
-
-
Supply and clamping of 3 runs of 31/2 x 300 sqmm of PVC armoured LTUG cable on post on wall with MS clamp..
50
-
-
Supply and fixing of brass cable gland for 3 1/2X 300sq.mm PVC armoured LTUG cable with earth connection.
10
-
-
Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection
10
-
-
Supply and erection of 250 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a) 25 x 10mm tinned cu flat for Inter connections, (b) 25 x 3 mm tinned cu flat for Interconnections and earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection, Interconnection of bus bars : (1)250A TPN switch bus bar for Interconnection 25mmX10mm copper flat, (2)125 A TPN outgoing switch disconnector fuse units 25mm X6mm tinned cu. Flat
supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches.
Incoming Switch : (1)250 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos
Outgoing Switch Switches : (2)125A A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break-7 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base. ( Both Essential and Non Essential - 14 Nos and Laundry - 1 Nos)
15
-
-
Supply and erection of 400 Amps capacity dust and vermin proof cubical panel board size of 5'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a) 25 X 12 mm tinned cu. Flat for 3 phase , neutral and 2, (b)2 Nos 25 x 3 mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection Interconnection of bus bars : (1)400A TPN switch bus bar for Interconnection 25mmX12mm copper flat, (2) 125A TPN switch bus bar for Interconnection 25mmX6mm copper flat, 3) 63A TPN switch bus bar for Interconnection 25mmX3mm copper flat. supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches. Incoming Switch : 1.400 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (1)125 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 5 Nos, (2)63 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 3 Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base. ( For A/C Outdoor Units Supply )
2
-
-
Supply and erection of 630 Amps capacity dust and vermin proof cubical panel board size of 6'X 5' X 2' made up of 16 SWG CRCA sheet steel for outer body, with doors, switch supports and seperations etc., and with supply and fixing of the following interior switch with bus bar chamber complete with Bus Bar (a) 50 X 10 mm tinned cu. Flat for 3 phase , neutral and 2, (b)2 Nos 25 x 6mm tinned cu flat for earth connections with bus bar insulators complete with the following tinned Cu flat should be used between busbar and switches for interconnection Interconnection of bus bars : (1)630A TPN switch bus bar for Interconnection 50mmX10mm copper flat, (2)400A TPN switch bus bar for Interconnection 25mmX12mm copper flat, (3) 250A TPN switch bus bar for Interconnection 25mmX10mm copper flat. supply and fixing of KWh meter (Submeter) & indication lamps. The panel should be fabricated as per IE rules & CEIG specification.The housing accommodate the following switches. Incoming Switch : (1)630 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 1 Nos, Outgoing Switch Switches : (2)400 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 2Nos, (3)250 A TPN Incoming switch disconnector fuse units interior only with HRC fuses double break- 5Nos. The panel board should be painted with two coats of high quality epoxy paint over one coat of red oxide primer with superscriptions. (lettering and numbering) The above cubical panel board rest on suitable angle iron base.
4
-
-
Supply, Installation, Testing & Commisioning of 12 Hp out door unit of inverter /Digital scroll compressor with Variable refrigrant system connectable to multiple indoor units. Outdoor unit shall be factory assempled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficeint scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigrant piping. Units shall be tested and commissioned with additional refrigerant.The unit shall be compatible for BMS operation with inclusive of System interface compatible with RS485 Modbus, Neccessary relay card /soft integrator to be provided, Including Necessary civil pedestal for outdoor units with suitable M.S. supports, rubber pads etc.
6
-
-
Supply, Installation, Testing & Commisioning of 14 Hp out door unit of inverter /Digital scroll compressor with Variable refrigrant system connectable to multiple indoor units. Outdoor unit shall be factory assempled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficeint scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigrant piping. Units shall be tested and commissioned with additional refrigerant.The unit shall be compatible for BMS operation with inclusive of System interface compatible with RS485 Modbus, Neccessary relay card /soft integrator to be provided, Including Necessary civil pedestal for outdoor units with suitable M.S. supports, rubber pads etc.
3
-
-
Supply, Installation, Testing & Commisioning of 18 Hp out door unit of inverter /Digital scroll compressor with Variable refrigrant system connectable to multiple indoor units. Outdoor unit shall be factory assempled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficeint scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigrant piping. Units shall be tested and commissioned with additional refrigerant.The unit shall be compatible for BMS operation with inclusive of System interface compatible with RS485 Modbus, Neccessary relay card /soft integrator to be provided, Including Necessary civil pedestal for outdoor units with suitable M.S. supports, rubber pads etc.
3
-
-
Supply, Installation, Testing & Commisioning of 20 Hp out door unit of inverter /Digital scroll compressor with Variable refrigrant system connectable to multiple indoor units. Outdoor unit shall be factory assempled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficeint scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigrant piping. Units shall be tested and commissioned with additional refrigerant.The unit shall be compatible for BMS operation with inclusive of System interface compatible with RS485 Modbus, Neccessary relay card /soft integrator to be provided, Including Necessary civil pedestal for outdoor units with suitable M.S. supports, rubber pads etc.
3
-
-
Supply, Testing and Commissioning of 2.02 TR Wall Mounted Indoor Unit with cardless Remote Controller.
114
-
-
Supply and providing of Separation tubes / Refnet joints ( Indoor unit - 114 Nos and Out door - 15 Nos)
129
-
-
Supply, Running and testing of 36.90mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
340
-
-
Supply, Running and testing of 28.60 mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
290
-
-
Supply, Running and testing of 22.20 mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
130
-
-
Supply, Running and testing of 19.10mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
160
-
-
Supply, Running and testing of 15.90 mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
140
-
-
Supply, Running and testing of 12.70mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
145
-
-
Supply, Running and testing of 9.50mm dia hard drawn, soft refrigerant piping with Seperation tube . The brazing to be Carried out with bleeding of nitrogen . The copper pipe to be insulated with 19 mm thick/13 mm thick Nitrile Rubber.
90
-
-
Supply and providing of 1.5 sq.mm. copper flexible Communication Cable from Indoor to Outdoor Unit.
1000
-
-
Supply and Fixing of water drain pile line (1" PVC pipe)
650
-
-
Supply of Timer & Single phase preventer
15
-
-
Supply and filling of Refrigerant R407C gas.
370
-
-
Supply and fixing of Hand shut off valve & Suction filter
15
-
-
Supply, fabrication and fixing of MS Channel for mounting the Air Conditioning Outdoor Unit
15
-
-
Supply of MS Cable Management system of size 150mm x 105mm with front plate mark of MS Sheet with one coat of red oxide with two coats of powder coating of suitable colour
300
-
-
Supply and run of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height with necessary clamps / supports on wall / floor / ground for earth connection.
2100
-
-
Supply Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 13 Persons Passenger Lifts as per the following specifications including taxes and duties.(Gearless Lift with out Machine Room) (1)Location: A and B Block, (2)No of lift: one no. (Gearless), (3)Type of lift: passenger, (4)Capacity of lift: persons / 884 Kgs, (5)Speed: 1.0 M / Sec., (6)Type of drive: V3F drive with enhanced ride comfort and near zero level functions, (7)No of floors: GF+3 Floor, (8)Total travel: 3.3 mts x 4 Landing =13.2mts, (9)Leveling accuracy: high level accuracy with smooth and jerk free stopping, (10)Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling, (11)Position of machine: directly above the lift well, (12)No of landing service: One in the front side- 1 no., (13)no. of car entrance: one in the front side only, (14)Car entrance door: Power operated automatic V3F drive center opening sliding SS door, (15)Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings, (16)Lift well : 2100 mm (Depth) X 1700 mm (wide) as per IS 14665(part1) 2000 to be constructed by PWD civil wing, (17)Lift pit depth:1600 mm,
2
-
-
(18)Car inner size: 1350 mm (width)x1300 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 680 Kg., (19)Car clear opening: 800 mm wide x 2000 mm height as per IS 14665 (part 1)2000, (20)Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well, (21)Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light., (22)Control: micro computer (micro processor):based simplex collective control with / without attendant (23)Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan, (24)Lift well: RCC construction with brick masonry to be constructed by PWD civil wing, (25)Induction: UP / DOWN digital direction and position indicator for all landings and inside the car, (26)Emergency alarm bell: battery operated bell to be provided with automatic charging device, (27)Emergency light: battery operated light to be provided with automatic charging device, (28)Fire mans switch: to be provided at the GF, (29)Minor builder works: to be provided by the lift contractor, (30)Scaffoldings: to be provided by the lift contractor, (31)Sill angles and facia plates: SS to be provided by the lift contractor, (32)Steel for lift machinery: to be provided by the lift contractor,
-
-
-
(33)Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor, (34)Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories. (35)Provision for intercom with phone: to be provided by the lift contractor, (36)Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, (37)Floor position announcer: to be provided by the lift contractor, (38)Special features : (a) Infra red door sensor with full height screen, (b)Full width half height rear panel mirror, (c)Tubular SS hand rail in car (d) Stainless steel signal features, (e) Vandal proof SS button with SS cover, (f) SS door frames for landing doors, (g) V3F door operator, (h) Call register signal ,(h)Stainless steel facia plates for car operating panel and landing fixtures, (j)Steel ladder for lift machine room, (k)On / off switch for fan and light, (l) Over load warning indicator with audio announcer, (m)Voltage stabilizer for control circuits, (n)Braille button,
-
-
-
(39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, (40)Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor, (41)Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, (42)Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.
-
-
-
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End
14
-
-
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.
8
-
-
supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")
2
-
-
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End
8
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
2
-
-
Supply and fixing of 100A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only
2
-
-
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
226
-
-
Supply and clarnping of 3.5x70sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.
100
-
-
Supply and frxing of brass cable gland for 3 1/2x70sqmm PVC armoured LTUG cable with earth connection
4
-
-
Supply and providing cable end termination of 3-1/2x70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
4
-
-
Supply , Testing Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8 P.F. Three phase 415V/ 420 Volts, 50Hz, 1500 RPM CPCB Approved capacity comprissing of Kirloskar Engine model 6R 1080TA developing 154 BHP water cooled clock wise rotating feed pump with 100KW/ 250KVA operating capacity brushless alternator close coupled underneath fuel tank standard safeties LLOP with stop solenoid battery with lead Electric start and vibration fitting and accessories and AMF panel as detailed below including transporting & unloading charges.
(A) Engine: Water cooled diesel engine suitable for Generator application with a shaft out put of 154BHP at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling fly wheel, ai cleaner, fan blower, radiator, water pump, fuel filter, lubricating oil filter, etc., (B) 12/24 Volt Electronic starting Equipment: Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50cms length. (C) ENGINE INSTURMEN PANEL / MOUNTED: Starting push botton / starting key, lubricating oil, temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil, pressure, safety control for high water temperature, safety control for over speed, hour meter (mechnical ) and RPM indicator, battery charging ammeter.
1
-
-
The engine should be capable of providing 10% over load for one hour for every 11 hours continuous at full load. (D)ALTERNATOR: 250KVA/100KW Capacity of brushless alternator, AC 3 phase, 50Hz, 415/420V, 0.8 PF, 1500 RPM under NTP conditions, conforming to IS:13364 (Part-II)/ 1992 to be means of coupling.(E) AMF CONTROL PANEL: The AMF control panel (cubical) should be fabricated with vermin proof and dust proof best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel painted and incorporating the following with suitable provision for connection incoming and outgoing leads having been made on the control panel. (1)AC Ammeter and selector switch, (2)Volmeter and selector switch, (3)3Nos current transformer with suitable ratio (4)Frequency meter, (5)KWH meter, (6)1 No power factor meter, (7)Battery charging set comprising of the following for charging the battery from mains (a)Transformer / Rectifer, (b)DC Ammeter, (c)DC Volt meter, (d)ON / OFF switch, (e)Charging rate selector switch, (f)push button start, (g)push button stop, (h)push button reset, (8)1 set Air break contactor with auxiliary netural contactor for main supply, (9)1 set Low volage HRC fuse for the short circuit protection of the main supply, (10)1 set Alternator contactor with auxiliary netural contactor,
-
-
-
(11)1 set Three pole bimetal release for over load protection of alternator, (12)1 set low voltage HRC fuse for the short circuit protection of the alternator, (13)1 set DC control relays incorporating engine start/ stop and failure to start / lockout, (14)1 set selecor switch auto/ manual, (15)1 no Push button "Start" (16)1 no Push button "Stop" (17)1 no Push button "Reset" (18)1 No signal lamp for indicating load on mains (19)1 no signal lamp for indicating load on set. (20)1no signal lamp for indicating set fails to start. (21)1no signal lamp for indicating set running, (22)1No signal lamp for indicating battery, (23)1set Pilot lamps of 3 nos, (24)MCCB of 250A capacity with magnetic thermal overload release, instant start circuit trip and under voltage release switch, (25)Rectangular copper bus bars (1No for each phase, neutral and earthing terminals) of adequate capacity duly colour coded with head shrinkable PVC sleeves, (26)1No mains voltage monitor, (27)Hooter/Audio alarm for indicating set fails to start and for DG O/L., (28)1set Timers (29)Audio and Visual indicator arrangements for: (a) Low lubricating oil pressure, (b)High water temperature, (c)Over speed (30)1No Earth fault relay, (31).Isolator to isolate the neutral, Note:- (1)The control panel should be complete with necessary fuses, cables, label, other accessories with neutral isolation arrangements.,
-
-
-
(2)The engine should trip for the following: (a) Low lubricating oil pressure, (b) High water temperature, (c)Over speed, (3)Supply and fitment of Auto Mains Failure Panel, 1 EB Service wih 200 Amps switch and contactors SUF Control relays, timers etc suitable for auto change over of DG & EB Service. F.FUEL TANK Fuel tank of 200 litres capacity and with inlet and outlet connections, level indicator with scale etc. G.BASE FRAME: Base frame should be fabricated with MS channel frame of rigidly welded construction for mounting of generaor set. The engine and alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame wih proper alignment. H) ACOUSTIC ENCLOSURE:
The Acoustic enclosure, Self standing weather proof KG- CPCB Typed Acoustic canopy KG 250WS floor mounting type with modular construction with the provision to assemble and dismantle easily and designed to suit all weather condtions. Erection of acoustic enclosure suitable for 250KVA Diesel generator complete with all accessories as above and suitable supports etc. 1. Supply of manuals for operation & maintenance of DG set with warranty card etc.
-
-
-
Erecion of Get set:- Providing suitable concrete foundation with cement concrete 1:2:4 with sand cushion around the foundation erection of 250KVA Generator set over the exisiting foundation and erection of Generator set with proper alignment over the existing foundation to suit 250KVA Generator set Foundation size L4200xW1600xH200mm.
1
-
-
Supply and installation of exhaust piping of sufficient length with suitable MS pipe so as to extend outside the generator room with necessary thermal insulation
5
-
-
Supply of lubricating oil to run the Generator set for minimum of 8 hours by supply of 400 litres diesel
400
-
-
Supply and laying of 2 runs of 31/2 x 185 sqmm size of PVC armoured LTUG cable in a trench tobe excavated at a depth of 0.75 Mtr. And puttin 0.15 mtr. layer of sand and covering the cable completely with concrete trough and sand and refilling the earth to make good. ( From Genset to AMF)
35
-
-
Supply and clamping of 2 runs of 31/2 x 185 sqmm of PVC armoured LTUG cable on post on wall with MS clamp.
10
-
-
Supply and fixing of brass cable gland for 3 1/2X 185sq.mm PVC armoured LTUG cable with earth connection.
4
-
-
Supply and providing cable end termination of 3 1/2 x 185 sqmm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection
4
-
-
Supply and run of 25mmx3mm copper flat with with screws on wall/floor for earth connection. (For Body Earth)
30
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
300
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
20
-
-
Supply and fixing of 15WGate light Fitting (Make Havells / Philips) (13000+ L/Chrg. 302.00)=13302
4
-
-
Supply and fixing of crystal mandala chandelier glass and metal with PVC unsheathed leads with coil earthing and painting of suitable colour.(29660 + L/Chrg. 1007=30667)
1
-
-
Supply and fixing of 8W LED Bollard type LED Fitting (Make Havells / Philips)
23
-
-
Supply and fixing of 45W Post top lantern LED Fitting (Make Havells / Philips)
13
-
-
Supply and fixing of 65mm (2 1/2") GI pipe (Class 'B') of 6 metre length with 300mm X 300mm X 6mm MS base plate duly welded at the bottom with concreting the construction of masonry pedestal with suitable MS box to house the 10A SP MCB two 4way connector on suitable hylem sheet with SMC box and supply and fixing of 1X70W led type street light fitting (Make: Philips / Havells / Equivalent) with 1 meter of 32mm dia GI pipe (Class 'B') and 32 mm dia GI bend on the above post with PVC unsheathed leads with coil earthing and painting of suitable colour.
28
-
-
Supply and fixing of brass cable gland for 4x25/16sq.mm PVC armoured LTUG cable with earth connection.
38
-
-
Supply and laying of 4x16 sqmm PVC aromured LTUG cable in a trench to be excavated at a depth of 0.75mtr putting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
800
-
-
Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
150
-
-
Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
30
-
-
Supply and fixing of brass cable gland for 2x16sq.mm PVC armoured LTUG cable with earth connection.
30
-
-
Supply and laying of 2x16 sqmm PVC aromured LTUG cable in a trench to be excavated at a depth of 0.75mtr putting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
575
-
-
Supply and clarnping of 2 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
75
-
-
Supply and Installation of 2 MP IP Bullet Colour Camera ,WDR 3.6 mm Fixed lens. Make:Hikvision/Eq.Model No: DCS-F4714 / DS 2CD1027G2-L
44
-
-
Supply and installation of 32 channel Network Video recorder , H.264/MJPEG dual code decoding upto 200 Mbps incoming bandwidtht support 2 SATA HDDs up to 8 TB . Make : D-link/Eq.
2
-
-
Supply and Installation of 8-port poE 2 Gigabit managed switch, which supports
9
-
-
Supply and Installation of 6U wall rack, with front glass door with lock and key facilities
2
-
-
Supply and Installation of 4U wall rack, with front glass door with lock and key facilities
9
-
-
Supply and Installation of 4TB built in Hard Disc Drive.Make: Seagate/Eq.
2
-
-
Supply and laying of CAT6 cable in existing 1” PVC pipe .Make:D-link/Eq.
3500
-
-
Supply and Installation of 55 inches LED TV with following features:1. USB Input 2.HDMI Port 3.Clear audio+ 4.Motion flow XR 200 5.Full HD 1080 Make:SONY/Eq. Model No:R252F ( 1.Dean Chamber, 2. MS Chamber, 3.VC Hall 4. Dean CCTV Monitoring )
1
-
-
Supply and laying of 6 core outdoor OFC Cable.Make:D-Link/Eq.
200
-
-
Supply and Laying of 20Mtrs HDMI cable with HDMI connectors with PVC pipe and accessories.Make: MX/Eq.
2
-
-
Supply and Installation of 10/100/1000 media converter for connecting OFC and cat6 cable. Make:D-link/Eq.
2
-
-
Supply and fixing of digital ISDN EPABX system with 896 Nos of analog extension 8 nos.of digital junction 400 nos.of expandable port 2 Nos. operator console and compliable ISDNQ IP net working system specification for PCM/TDM Technology 32 bit microprocessor caller id on digital and IP as well as analog extension ISDN PRI/BRI boss secretary feature operator console for multilingual menu driven and keys name display on LCD.
1
-
-
Supply, fixing and termination of RJ11 I/O box with face plate and back box for LAN. Make: D-Link/Eq.
135
-
-
Supply, fixing and termination of 200 pair DB with krone module and necessary connections.
1
-
-
Supply, fixing and termination of 100 pair DB with krone module and necessary connections.
2
-
-
Supply, fixing and termination of 20 pair DB with krone module and necessary connections.
9
-
-
Supply, fixing and termination of 10 pair DB with krone module and necessary connections.
4
-
-
Supply and laying of 0.5mm 50 pair telephone cable with suitable PVC pipe make: Delton/ eq.
200
-
-
Supply and laying of 0.5mm 20 pair telephone cable with suitable PVC pipe make: Delton/ eq.
750
-
-
Supply and laying of 0.5mm 10 pair telephone cable with suitable PVC pipe. make: Delton/ eq.
975
-
-
Supply and laying of 0.5mm 2 pair telephone cable with suitable PVC pipe. Make: Delton / eq.
1097
-
-
Supply and Installaion of caller ID telephone instrument. Make:Betel/Eq.
135
-
-
Supply and laying of LTUG cable in a trench digging of ground of depth 2 ft X width 2 ft X length 3 ft and construction of wall with bricks of height 1 1/2 ft on either side with cement mixture and filling of 12mm jelly of depth 1/2 ft with 1/2 cement mixture. (A) Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. (B) Cement concrete 1:5:10 (One of cement, five of sand and ten aggregate) using 40mm gauge hard broken granite stone jelly for flooring including dewatering if found necessary and laid in layers of not more than 15cm thick etc., complete, (C) Brick work in Cement Mortar 1:5 using best quality II class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for the following including curing, etc., (D)Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., (E)Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. (F)Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc
100
-
-
Suppy and fixing LED Light board for Name board ,Including required structural steels , MS Angle ,plate supporting to name board ,Board making with 18 swg japan sheet ,Painting with apporoved colour using neon lights Size 12' to 15' .Including bolts nuts ,Welding works ,Shifting charges ,Transportation charges etc. fiy"u; Ehw;whz;L j';Fk; tpLjp. ntYhu;. (50' X 5')
1
-
-
Supply, Installation, Testing, Commissioning and Handing over of the following 20 KWp of Grid connected roof top Solar PV Systems Scheme comprising of : (i)Solar panels of type mono crystline PERC ate. (ii) powr conditioning unit (PCU) With MPPT inverter controls protection devices interconnecting D.C cables connectors junction Boxes and accessories, (iii) D.C. D.B., (iv)A.C. D.B., (v) A.C Cables and accessories, (vi) Lightning arrestor earting, etc., (vii) module metallic mounting structures, (viii) Installation testing and commissioning corresponds to BIS and IEC requirments
1
-
-
Supply and Clamping of 3 X 16 sqmm PVC LTUG copper Cable on wall with MS clamp ( From Solar plant to Panel Board)
200
-
-
Supply and fixing of Aluminium Alloy Solid round conductor with 8mm dia of material AIMgSI as per IEC 62561-2 with Conductor Holder, connector and joints..etc
2
-
-
Supply and fixing of Air Termination rod 16/10 mm ( Ligntning Rod) of size 3 mtr
2
-
-
Supply and fixing of Lightning Counter - LCD Display and battery
2
-
-
Supply and fixing of S.S Test Joint
2
-
-
Supply and fixing of Rust Resistant non corrosive 10mm dia copper Bonded steel round conductor for earth Termination
6
-
-
Supply and fixing of S.S Conductor Holder
220
-
-
Supply of maintenance feree earthing with copper rod of 17.2mm dia and 3m length
2
-
-
Supply and run of 25mm x 6mm GI Strip all round the building
600
-
-
GST @ 18 %
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements