Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Oct 2024
Closing Soon13 Nov 2024
Tender AmountRefer Documents
Costs
EMD
₹ 14,66,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Madras University - Centenary Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_498022_1Tender No
03/HBC/2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Clearing the surface thoroughly with water and remove all the impurities and loose plaster, flacks, fungus growth etc by suitable mechanical means like scrapping or wire brushing and subsequantly wash with adequate water to get an abosulutely cleaned surface to take on further treatment. All the grooves will be refilled with multi proof co polymer with filler loose plastes and cured cement mass will be removed to make the surface clean and applying Gal tech CT epoxy virigen solvent free anti corrosive two pack resin 50 + Hardner 50 (1 coat) as primer impregnated with 110 GSM class cloth over that apply C.T. Epoxy two coats as finish that will for's FRB lining etc complete complying with standard specification and as directed by the departmental officers at site of work.
265
-
-
Providing water membarane treatement to the leaky terrace using Synthetic Butadine Rubber sheet (SBR) including hacking the surfaces and roughening the old RCC roof surface with wire brushes and tools wherever necessary and the Synthetic Butadine Rubber sheet (SBR) has been laying before weathering course brick jelly concrete and with using necessary SBR adhesive to carefuly laying with proper joints ( the joints over lap to be not more than over lap 15cm to 20cm ) etc, including labour for laying the sheets etc complete including curing and finishing neatly complying with standard specification and as directed by the departmental officers.
2685
-
-
Providing pest control with antitermite treatement drilling holes at junction of walls with floors at 300mm intervals and injucting chemical emulsion on those with cement etc. making holes along the vertical surface out side the walls at 150mm intervals to the depth of 450mm pointing chemical emulsion into the holes and closing holes with chemical etc. spraying all surface of treatment is to be done as per IS code no:5313/ Part III 1981 with approved chemical.(The chemical is to be used on the work should be got approved by the Executive Engineer before use on work) etc complete complying with standard specification and as directed by the departmental officers.
8128
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
789
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
2685
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
160mm dia PVC Pipe
124
-
-
110mm dia PVC Pipe
84
-
-
Brick work in Cement Mortar 1:5 using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for foundation and basement including curing, etc., complete complying with standard specifiction.
32
-
-
Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. .
1880
-
-
Renewing and fixing best quality 12mm thick water proof plywood with necessary labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers.
200
-
-
Renewing and fixing GI Sheet 22 gauge over the Existing or new raftrs and reepers including cutting to the required shape overlapping and fixing with GI bolts, nuts, washers etc complete complying with standard specification and as directed by departmental officers
200
-
-
Fabricating, supplying and fixing of prepainted galvanized iron sheets with the following specification, The material should be of PPGI approved design 0.56mm thick 24 gague having width 1050mm.The sheet should be G.I base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws. Plastic washer.The washer and screw to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of z120 GSM paint thickness the finish should be terra cotta finish like Malabar polyster manglore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated cutting the sheet in to the required size and making ornamental desifns as per the site condition and as directed by the deptl.officers.
2200
-
-
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
85
-
-
Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
123
-
-
Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
56
-
-
Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-1/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.
870
-
-
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.
80
-
-
Providing and fixing RCC well ring of 1200mm dia 4nos 300mm height each with necessary top cover including cost of conveyance charges.This work includes earth work excavation 1400mm dia 1200mm depth, auger boring 300mm dia to a depth of 10000mm, supply and installing 140mm dia slotted PVC pipe line 10m long to with stand pressure of 6kg/cm2, space between outside pipe and auger portion filled with pebbels, bottom two rings filled with 40mm HBGS metal over that one ring filled with river sand. The existing rainwater pipe chamber connected to Soak pit by 150mm dia PVC pipe 6kg/cm2. The work shall be carryout as per drawing approved by Executive Engineer.
7
-
-
Renewing the damaged pavement with new one of interlock paver blocks (synthetic finish) of 83mm thickness with following specification. The synthetic finish pavement interlocking blocks of different size and variety such as Biarch, I paver, ZIG ZAG, intech, Vintage and Hexagon. The interlock blocks made up of PCC 1:2:4 mix using 10mm to 12mm HBG stone clips of suitable design for moving heavy vehicles machineries. The rate is inclusive of cost of Interlocking paver blocks, laying in position by manually, proper alignments, finishing the top surface using mechanical vibrators. The cost is exclusive of preparation of sand bed for laying paver blocks and including cost of power consumption charges, other incidental charges if any. All the works should be directed by the departmental officers etc., complete.
354
-
-
Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
35
-
-
Providing and laying Vaccum dewatering with reinforecd cement concrete flooring(thickness 50mm to 125mm) using M20 Grade concrete including the cost of side shuttering with MS Channels, floors using TREMIX or equivalent and finishing the top surface to required level /slope and grade with rough/broom finish using power trowels(both fan & disc) of standard,make including curing, providing and mixing of hardering compound @2kg/Sqm, cutting of VDF floor 100-150mm thick with Diamond saw system(disposal of debries to be included in the quoted rate) as per specification including filling of colpor of Fosroc make etc)
235
-
-
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
1226
-
-
Paving the floor with best approved quality Flamed Rough Steel Grey Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
2322
-
-
Paving the floor with best quality Double charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
1034
-
-
Nosing to the granite Slab by Cutting the granite slabs for 18mm to 20mm thick edges semicircular shape to required size and pollishing using hand machine and the nosing is made highlyh smooth and glossy. The cost includes labour charges and cost of machiniries and polishing charges etc. complete as directed by the Departmental Officers.
547
-
-
Flooring with Designed ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
202
-
-
Dadooing walls with Designed colour ceramic tiles of size 450x300x6mm best approved quality, Designed colour ceramic tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
917
-
-
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
40
-
-
Renewing the damaged European water closet and refixing new dive plus wall CASCADE model mounted inter closet Jaguvar brand size 755x365x655 trap distance (mm) S-300 with all fittings concealed tank geterit brand multi brand push plate water cupling Jaguvar brand and fisher bolt DL X brand including dismantling and masonry wherever necessary and made good in the original condition after fixing etc., complete complying with standard specification and as directed by the departmental officers.
9
-
-
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
25
-
-
Renewing and refixing the WPC door shutters with frame including cost of furniture fitting such as 3 nos 4"brass butt hinges, 2nos 6"brass tower bolt, 2nos 4"brass hand, 1 no brass, single key shutter, mortice lock without night latch, etc., complete complying with standard specification and as directed by the departmental officers at site of work.
80
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
20
-
-
Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
26
-
-
Renewing and refixing the solid core flush door shutters with commercial ply on both side with teak wood lipping alround 35mm thick including cost of furniture fitting such as 3 nos 4"brass butt hinges,2nos 6"brass tower bolts,2nos 4"brass handle, 1 no brass drop, single key shutter, mortice lock without night latch, 1 no door closer, 1 no brass door stopper, 1mm thick best quality lamination sheet etc., complete complying with standard specification.
50
-
-
Supplying and fixing Stainless steel coated towel rail 600mm long and 20mm dia meter with brackets of same materials including cost of teak wood plug and CP screws etc complete complying with standard specification and as directed by the departmental officers
5
-
-
Supplying and fixing position CI Nahani Trap of size 100 x 75mm with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
51
-
-
Renewing and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.(schedule-40) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.
-
-
-
UPVC 20mm dia pipe
373
-
-
UPVC 32mm dia pipe
169
-
-
UPVC 40mm dia pipe
321
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
110 mm PVC pipe
264
-
-
160 mm PVC pipe
132
-
-
Renewing the damaged broken unservicewable Health faucet with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
47
-
-
Renewing the damaged and broken Napkin destroyer with digital display model SM-20 wall mounting type including fixing the same in position with necessary screws, nails including labour charges for fixing in position etc., complete complying with standard specification and as directed by the departmental officers.
10
-
-
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
31
-
-
Reconstruction of damaged Manhole chamber of size 600 x 600 x 600mm with a base concrete of by new on of a base of concrete of Plain cement concrete 1:5:10, 10cm thick over a 10cm sand cushiion & brick work in CM 1:5 for chamber wall with 20mm thick 1:3 CM plastering for walls flooring including cost of labour charges curing cost of sFRC cover slab of size 0x60x0.60 including labour charges for fixing the slab inposition etc.,
22
-
-
Renewing and refixing following UPVC special of approved qaulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
-
-
-
UPVC Elbow - 25mm dia
40
-
-
UPVC Elbow - 32mm dia
40
-
-
UPVC Elbow - 40mm dia
40
-
-
UPVC Tee - 20mm dia
40
-
-
UPVC Tee - 25mm dia
40
-
-
UPVC Tee - 32mm dia
40
-
-
UPVC Coupler - 20mm dia
40
-
-
UPVC Coupler - 32mm dia
40
-
-
UPVC Coupler - 40mm dia
40
-
-
UPVC Coupler - 50mm dia
40
-
-
UPVC Ball valve-20mm dia
40
-
-
UPVC Ball valve-25mm dia
40
-
-
UPVC Ball valve-32mm dia
40
-
-
UPVC Ball valve-40mm dia
40
-
-
UPVC Ball valve-50mm dia
40
-
-
UPVC Reducer - 32mm x 25mm dia
40
-
-
UPVC Reducer - 40mm x 32mm dia
40
-
-
UPVC FTA-20mm dia
40
-
-
UPVC FTA-32mm dia
40
-
-
UPVC FTA-40mm dia
40
-
-
UPVC MTA - 25mm dia
40
-
-
UPVC MTA - 32mm dia
40
-
-
UPVC MTA -40mm dia
40
-
-
UPVC MTA -50mm dia
40
-
-
UPVC Bush-32mm dia
40
-
-
UPVC Bush -50mm dia
40
-
-
Renewing and fixing in position the SS Heavy duty long body tap 15mm(Parryware make) of approved make and quality including cost of shellac, thread, cutting and threading wherever necessary etc., complete complying with standard specifications and as directed by Departmental officers.
65
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
Gun mental Gate Valve 32mm Dia
40
-
-
Gun mental Gate Valve 40mm Dia
40
-
-
Renewing the damaged broken unservicable Soap tray with new one of best approved quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
5
-
-
Renewing the damaged urinal granite partition with new one of urinal granite partition including nosing, fixing in position etc., complete complying with standard specification and as directed by the departmental officers.
22
-
-
Supply,Installation,Testing&Commissioning(SITC) of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Curtain) Size:22.5Mtr x 8Mtr. (Height Considered as 6 Mtrs) Make: Om Phile / Nexgen / Comrade
1
-
-
Supply,Installation,Testing&Commissioning(SITC) of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Rear Curtain) Size: 22.5Mtr x 8Mtr. Make: Om Phile / Nexgen / Comrade
1
-
-
Supply,Installation,Testing&Commissioning(SITC) of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 50% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Frills) Size: 17Mtr x 1Mtr. Make: Om Phile / Nexgen / Comrade
3
-
-
Supply,Installation,Testing&Commissioning(SITC) of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on to curtain trollies (For Main Valance) Size: 21.5Mtr x 1.2Mtr. Make: Om Phile / Nexgen / Comrade
1
-
-
Supply,Installation,Testing&Commissioning(SITC) of Glazzed Cotton fabric fire retardant treated as per approved colour and make with a gathering of 0% stitched as per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing. (For Wing) 8Mtr x 2Mtr Make: Om Phile / Nexgen / Comrade
8
-
-
Supply,Installation,Testing&Commissioning(SITC) of On Stage Fixed Frill Bar 17 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the frill, connected with MS Flat duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Leksa Lighting / Markrich / Aultra Lighting
3
-
-
Supply,Installation,Testing & Commissioning(SITC) of On Stage Fixed Valance Bar 21.5 Mtrs Length Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, supported to hang the Main Valance of the stage system duly powder coated with matt black texture finish paint. All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Make: Leksa Lighting / Markrich / Aultra Lighting
1
-
-
Supply,Installation,Testing & Commissioning(SITC) of Fixed Wing Structure designed as per site condition for a height approx 8 Mtr x 2Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp and 360° Rotatable.Make: Leksa Lighting / Markrich / Aultra Lighting
8
-
-
Supply,Installation,Testing & Commissioning(SITC) of Motorized DMX operated Main Curtain 22.5 Mtrs straight, Centre partting as per design.This mechanisam shall be provided with 01 Nos. of 1.5 HP, 1440 RPM, 90 B5 frame, 3Ph. 415VAC Motor with Brake for Motor System to lift a load which should be synchronized with Motor Control centre Panel. Winch shall have 3 phase motor with an RPM of 1440,KW (HP) : 1.1(1.5), Frame : 90S, EFF:75.0%, MTG : B5, AMP :2.7Y, Volt:415v, DE BRG : 62052Z, DUTY:S1, FREQ:50Hz, NDE BRG:62052Z, IP:55, AMB:50 degree.The outer surface temperature is limited.It shall have an Worm Reduction Gearbox with GMRV-90 80:1, 90B5, Single Reduction 7.5:1 to 100:1 and the size shall be 90. It shall have an drive unit base frame to fix the gear box which contains one shaft Made up of I Track for complete lengthCurtain holding trollies with ball bearing for smoothernoiseless movement consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of200mm /250 mm throughout the trackOverlap of 0.5~0.9 Mtrs. Motor Cable termination box Trollies uniformly distributed along the track at every 200/250mm with a master trolley. Open and close limit controller.Drive unit with suitable capacity of motor unit, Wire Rope shall be of GI Wire ropes Min 3mm DaiUndergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Markrich
1
-
-
Supply,Installation,Testing & Commissioning(SITC) of Fixed Rear Curtain 22.5 Mtrs straight, Centre partting as per design.Made up of I Track for complete length Curtain holding trollies Providing ball bearing for smoother noiseless movement 2 wheeler trolley placed uniformly at specific interval of 200mm /250 mm throughout the track Overlap of 0.5~0.9 Mtrs. Suspension through Suspenders as per site conditions Undergone through various chemical treatment to keep them rust free, Black texture finish paint. All metal parts are powder coated Make: Aultra Lighting / Leksa Lighting / Markrich
1
-
-
Supply and Installation of Anutone Strand Ebony, square edge Magnesite bonded pinewood fibre core tiles of size 600x1200x15, density 400 kgs/m3, weight 4/6kg/m2 installed by using Anutone Strut framework system and Anutone Strut Z bars.The Anutone Strut framework systems includes Anutone Strut CC25 Cross Channel having thickness 0.55mm, length 3600mm, knurled web 35, depth 20mm and equal flanges 15mm is fastened to wall positioned vertically in a regular manner at 600mm c/c. Anutone Strut Z bar having 40mm height, thickness 1mm is first fixed behind the panels by using suitable fasteners. Another length of Anutone Strut Z bar to be fastened perpendicular to Strut CC25 Cross Channel at spacing so as to match with that of Strut Z bars rear to panels. Strand Ebony, square edge panels are then slided on to Anutone Strut Z bar fixed on CC25 Cross Channel.The system is backlined with the acoustical infill Anutone SynthPF 5x50. Technical Parameters • Fire (Class) – 1 & P
• Acoustics – NRC 0.87 (For 15mm thk C50 Mounting)
• Thermal conductivity (W/mk)– 0.08
• Climate (°C, RH) – 50, 90
• Light reflectance (%) – Low light reflectivity
• Green (VOC, RC %) – Low, 30
254
-
-
Supply & installation of Anutone Salon Slats Surco made of pinewood E1 grade fiberboard, melamine laminated finish, groove perforated slats L16-2 - (2mm Slats @16mm pitch) ), backlined with Soundtexblack acoustical fleece, tongue-groove edge for a seamless look, size 128x2440x16mm, volume density of base board 800Kg/m3, weight 8Kgs/m2 (L16), installed by using Anutone Strut framework system.Anutone Strut framework system includes Anutone Strut CC25 GI core cross channel having thickness 0.55mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened to wall or framework behind vertically/horizontally at every 600mm c/c. Anutone Strut CC18 aluminium core cross channel, thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge ¢re brackets is then fixed perpendicular to the Strut CC25 GI Cross channel with the help of fasteners at every 400mm centers. Slats Surco of size 128x 2440x16mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Short edges of the panel are staggered. Contractor to provide expansion joints of 3mm at every 4.88m length wise and 4.992m width wise.Panels are backlined with Anutone SynthPF 5X50 held in position with dab spots of suitable adhesive.
Technical Parameters
• Fire (Class) – 1 & P (For FR grade)
• Acoustics – NRC 0.77 (For E300* Mounting)
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 50, 70
• Light reflectance (%) – 75 (Maple Arce)
• Green (VOC, RC %) – Low, 25
588
-
-
Supply and installation of Anutone Stretch NRC wall fabric system by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 15mm (FS15) and Midseam 15mm (FS15), strand board, synth PF infill with requisite accessories & tools. Wooden base 10mm is first installed on the strand board along the marking lines with metal fasteners inserted at 300mm centers . FS15 tracks to be installed on wooden base, after applying adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. Strand square edge magnesite bonded pinewood fiber panels of size 600x1200x20mm having density 400kg/m3, weight 4kg which is fixed to wall with suitable fasteners. Synth PF 10x25mm thick adhered on strand panel by using adhesive. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm.The fabric should be 99% acoustically transparent .The whole system should give NRC of 0.75 Technical Parameters
• Core - pinewoodfibre & polyfibre
• Fire – 1
• Acoustics – NRC 0.85
• Climate (OC RH) – 49, 90
• Termite resistance – Yes
• Light reflectance – Colour dependent
• Green (RC %) – 25
• Hygiene (VoC, Clean room) – Low, Class 1
221
-
-
Supply and Installation of Anutone Subtex Nubby,square edge, Glassfibre core fully encapsulated ceiling tile of size 595x595x15mm having volume density 120Kgs/m3, weight 1.8kg/m2 which is suspended by using 0.3mm thick Anutone Skelet TrelisT15 metal grid system.Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Subtex Nubby square edge of size 595x595x15mm shall be placed into the grid size of 600x600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade.Optional: The system is backlined with the acoustical infill Anutone SynthPF 10x25 Technical Parameters • Fire (Class) – 1 & P
• Acoustics – NRC 0.9 (For E900 Mounting)
• Thermal conductivity (W/mk)– 0.066
• Climate (°C, RH) – 40, 95
• Light reflectance (%) – 85
• Green (VoC, RC %) – Low, 35
2678
-
-
Supply and Installation of Anutone Mat Ebony, square edge, Magnesite bonded pinewood microfibre core pigmented ceiling tiles of size 595x595x15mm, volume density 600Kgs/m3, weight 9/12kg/m2 which is suspended by using 0.3mm thick Anutone Skelet Trelis T24 Ebony metal grid system.Anutone Skelet Trelis T24 Ebony metal grid system of 600x600mm module includes Anutone Skelet WA24B30 wall angle with equal flanges of 24mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT24B36 MainT with flange width 24mm, height 38mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT24B12 CrossT with flange width 24mm, height 32mm and length 1200mm is interlocked into the pre-cut slots in the Main T24 at 600mm centers in the perpendicular direction to the Main T24. Finally Anutone Skelet CT24B06 CrossT with flange width 24mm, height 32mm and length 600mm are interlocked into the precut slots in the CT24B12 CrossT in direction parallel to the Main T24 to result in 600x600mm module. Anutone Mat Ebony of size 595x595x15mm shall be placed into the grid size of 600x600mm. Technical Parameters • Fire (Class) – 1 & P
• Acoustics – NRC 0.74 (For 15mm E300 Mounting)
• Thermal conductivity (W/mk)– 0.1
• Climate (°C, RH) – 50, 90
• Light reflectance (%) – Low Light reflectivity
• Green (VoC, RC %) – Low, 35
231
-
-
Supply and Installation of plasterboard of India gypsum make , Tapered edge of size 1200mmx1800mmx12.5mm thick to be fixed by using Main Channel MC 45 @ 1200mm centers and Strut CC22 @ 600mm centers Panel joints are filled with jointing compound (Seam + Strap + Seam) .Surface is finished with putty , primer painting and emulsion paint. So as to have an neat appearance as directed by the departmental offices. The cost includes cost of material, cost of Labours, scaffolding, Transportation, conveyance Etc., complete complying to standard specification.
144
-
-
SR 07 - SLIDER - PUSHBACK (22 INCH) Chair’s Description - Push Back Mechanism chair Arm rest to arm rest (ctc) 559 mm (22”).
ABS molded housing for back Covers.All sheet metal parts with powder coated Arm resRow number for seat along the aisles.t in PPCP with Cup holders.eat numbering on inner both the side of the chair stands with silicon stickers.
Provision for lights on sides along with aisles with the row and the Provision for lights on sides along with aisles with
the row and the Fabric- Colour approved by customer 100% polyster with 4 mm lamination. Frames- 15 mm thick high pressure induction heated plywood for seat manufactured with hardwood veneers 12 mm thick high pressure & induction heated plywood forBack 12 mm thick high pressure & induction heated plywood for Back manufactured with hardwood veneers.Polyurethane foams -Thickness:
a) Seat cushion tapered type front portion with a hump Front - 115mm (+/-5mm) Back - 90 mm(+/-5mm) b) Back cushion bucket type. Headrest - 110 mm (+/-5mm) Centre – 75 mm (+/-5mm)
Bottom – 110 mm (+/-5mm)Sides contours – 70 mm (+/-5mm) Size:a) seat cushion: 510 mm (+/-5mm) x 500 mm (+/-5mm)
b) Back cushion: 740 mm (+/-5mm) x 500 mm (+/-5mm) 3. Density: 50 to 55 kg/m3 5 Springs For Sliding mechanism torsion spring/spring steel IS:4454 1981 grade III . Sheet - metal components-HRCA/CRCA Sheet metal IS: 2062-2011 & IS 4923-1997 Side Stands Side stand 3mm (+/- 0.2mm) thick size: 415mm(+/-5mm) x 345mm(+/-5mm) both side bottom profile design cut. 75mmx25mm 14g(+/-.2 mm) 190 mm length tubular pipe for the leg wielded to the 3mm plate.Flat for base of the stands 280mm
(+/2mm) length 50mm (+/2mm) x 5mm (+/-0.2mm).Push Back Frames: Frames are constructed by 40mmx20mm CRCA Pipe supported byLangels of 2mm thickness of HRCA Sheets and this mounted with injection molded Plastic wheels of 2 no’s of dia 45mm and thickness of 45mm Made of Engineering plasitc (POM) materials.
170
-
-
Push Back Mechanism:Slider U box formed out of 2mm HRCA Sheets of size 136mm x306mm free moment of seat with Engineering plasitc rollers and proper injection molded PVC noise damping Stoppers are provided at both end of slider U Box. Impact area of PVC noise dampingstoppers at back which is supported by Allen bolt of 6mm x 75mm The link of bright metal 280mm x25mm x5mm Connected to pushback mechanism box of 180mm(+/- 2mm)x 7 0(+/-2mm) mmback mechanism box of 180mm(+/- 2mm)x 7 0(+/-2mm) mm & height of the box 15mm(+/- 2mm), ear “L” bracket attached to the box 190mm(+/-2mm) x135mm(+/-2mm). With two slot holes for fixing the back Seat and Back cushion housing. ABS molded vacuum forming out of 2mm sheet. Instillation of the chairs- The chairs to be installed
to the flooringprovided to us ready to fix condtion with the Chemical anchoring M10x100 mm.
-
-
-
SR 04 - SLIDER - PUSHBACK (22 INCH)
HSN/SAC Code: 9403 NOTE: Chair’s Technical Specification - Push Back Mechanism chair. Arm rest to arm rest (ctc) 559 mm (22”). ABS molded housing for back Covers.All sheet metal parts with powder coated Arm rest in PPCP with Cup holders. Seat numbering on inner both the side of the chair stands with silicon stickers. Row number for seat along the aisles.Provision for lights on sides along with aisles with the row and the seat numbers display. Fabric -Colour approved by customer.Frames- 15 mm thick high pressure & induction heated plywood for seat manufactured with hardwood veneers. 12 mm thick high pressure & induction heated plywood for Back manufactured with hardwood veneers. Polyurethane foam- Thickness: a) Seat cushion tapered type front portion with a hump Front - 115mm (+/-5mm) Back - 90 mm(+/-5mm) b) Back cushion bucket type.Headrest - 90 mm (+/-5mm) Centre – 85 mm (+/-5mm)Bottom – 125 mm (+/-5mm) Sides contours – 100 mm (+/-5mm)Size : seat cushion: 510 mm (+/-5mm) x 500 mm (+/-5mm) b) Back cushion: 685 mm (+/-5mm) x 457 mm (+/-5mm)Density of cushions: 50 to 55 kg/m3 . Springs-or Sliding mechanism torsion spring/spring steel IS:4454 1981 grade III Sheet - metal components - HRCA/CRCA Sheet metal IS: 2062-2011 & IS 4923-1997 Side Stands-3mm (+/- 0.2mm) thick size: 415mm(+/-5mm) x 345mm(+/-5mm) both side bottom profile design cut. 75mmx25mm 14g(+/-.2 mm) 190 mm length tubular pipe for the leg wielded to the 3mm plate.
Flat for base of the stands 280mm (+/-2mm) length 50mm (+/2mm) x 5mm (+/-0.2mm).
3448
-
-
Push Back Frames: Frames are constructed by 40mmx20mm CRCA Pipe supported by Langels of 2mm thickness with injection molded Plastic wheels of 2 no’s of dia 45mm and thickness of 45mm Made of Engineering plasitc (POM) materials.
Push Back Mechanism:Slider U box formed out of 2mm HRCA Sheets of size 136mm x 306mm free moment of seat with Engineering plasitc rollers and proper injection molded PVC noise damping Stoppers are provided
at both end of slider U Box. Impact area of PVC noise damping stoppers at back which is supported by Allen bolt of 6mm x 75mm The link of bright metal 280mm x25mm x5mm Connected to push back mechanism box of 180mm(+/- 2mm) x 70(+/-2mm) mm & height of the box 15mm(+/- 2mm), ear “L” bracket attached to the box 190mm(+/-2mm) x140mm(+/-2mm). With two slot holes for fixing the back Seat and Back cushion housing - ABS molded vacuum forming out of 2mm sheet Instillation of the chairs - The chairs to be installed to the flooring provided to us ready to fix condtion with the Chemical anchoring M10x100 mm.
-
-
-
Providing two legged scaffolding using 48.30mm dia heavy duty MS pipe over all height of 3.00m the distance between 2 legs being 1.25m and the spacing of the post being 2m in each rows and providing platform with C.W. planks using 40mm thick silver oak and 1.00m wide in complete form with horizontal bracings @ 1.50m c/c vertical direction and with cross bracings using same 48.30mm dia including cutting, threading assembly with red oxide primer, labour charges cost of specials such on large plate, shoe, carcher, coupling, bolt and nut transportation charges. The bottom of vertical post shall rest on 300x300x70mm 1:2:4 concrete base etc complete complying with standard specification and as directed by the departmental officers.
-
-
-
For Initial height of 3m
3530
-
-
For every additional 2.5m height
15190
-
-
Clean removal of Cement plaster from walls etc., complete complying with standard specification and as directed by the departmental officers at site of work.
3695
-
-
Replastering the existing surfaces of the beams and columns, ceiling with following specifications. The existing weak and spalled plastering and concrete shall be removed in order to expose a sand concrete surface. The brick work plastering on either sides of columns shall be removed to a width of 150mm. The existing corroded reinforcement shall be cleaned thoroughly by wire brushing /mechanical means to remove all rust and scales. Additional rft shall be provided to the required lap length on the excisting re-bars. The re-bars shall be treated with anti-corrosive coating in 2 coats. The existing exposed concrete shall be cleaned with wire brush washed with clean water. The polimer bonding agent shall be mixed with neat cement @ 500 ml/10Kgs of cement applied on concrete surface. The shuttering shall be tied alround the columns, beams where the thickness of repairs is more than 50mm. (The chicken mesh shall be tied alround the column on to nails fixed on exposed brick work on either sides of columns) shall be poured and ensured that the entire thickness as filled and compacted. The concrete repair mortar shall be used in areas where the thicknesses of repair does not exceed 50mm, applied in 2 layes on beams, colums, lintels. The columns and beams and ceiling surface shall be replasered using cement mortar 1:4 admixed with polimer additive to a thickness of 25mm to levels and cured for 7 days using gunnay bags tied around the repaird areas. The rate inclusive of all the above items. Necessary scaffolding arrangements shall be provided by the department to the entire side of the building etc. Complete complying with standard specification and as directed by the departmental officers.
2020
-
-
Plastering the walls with Cement Mortar 1:5, 12 mm thick using the river sand including curing and finishing neatly complying with standard specification and as directed by the departmental officers etc. complete.
8575
-
-
Renewing and fixing teak wood panelled Door shutters openable type by using well seasoned teak wood of superior quality and approved variety as per the original design and pattern instructed by the Engineer in charge. The door shutter is made with two number of 120mmx40mm size vertical styles, top rail, lock rails and bottom rails of size 125mmx40mm,250mm x 40mm, 170mmx40mm respectively. The door shutter panels is covered with teak wood planks of 25mm thick including all necessary fittings brass/steel hardwares like screws, nails, hinges, hooks, tower bolts, handle, aldrops of same design, size etc complete. item to also include making all the mouldings and design of the panels as in the existing evidence. item to include complete finishing of the shutters as directed by the departmental officer. (The rate inclusive of cost of all teak wood materials, Labour wrought and putup of door frames and shutters, cost of all furniture fittings, labour charges for fixing inposition etc., complete complying with standard specifications. (Two leaves)
52
-
-
Renewing and fixing of glazed ventilator with new Teak wood glazed ventilator of size 1.20m x 0.60m by using Teak wood scanting thickness of size 0.04m frames fixed with 4mm thick pin headed glass including labour for wrought put up and fixing the ventilator in position with necessary furniture fittings including with neat finishing etc., complete complying with standard specifications and as directed by the departmental officers.
50
-
-
Renewing and fixing fully glazed shutters for windows openable type by using well seasoned teakwood of superior quality as per the original design and pattern instructed by the Engineer In Charge. The window shutter is made of vertical styles of size 80mm x 30mm. Both top and bottom rail is of size 80mm x 30mm. The window shutter panels is covered with 4mm thick plain glass which is fixed with teakwood reepers scantling of size 35mm x 30mm on both sides and the glass panel is divided into 6 parts. Item to also include making all the mouldings and design of the panels as in the existing evidence. Item to include complete finishing of the shutters as directed by the departmental officers.(The rate inclusive of cost of all teakwood materials, labour wrought and put-up of door shutters, cost of all furniture fittings, cost of 4mm thick plain glass, labour charges for fixing the shutters in position etc., complete complying with standard specifications)
71
-
-
Painting the walls with Two coats with first class quality Exterior Emulsion paint of approved colour over a priming coat including ordinary scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
3305
-
-
Painting the wall with Texture Finish Paint including labour charges including through scraping of old plastered surface, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
8128
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
340
-
-
Painting with old wood works with two coats of Synthetic Enamel Paint of best approved first quality and colour of synthetic enamel paint over the priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
310
-
-
Easing the existing over hanging doors and windows including renewing from its position and refixing the same after attending petty repair works including labour for wrought and put up in position fixing necessary furniture fittings excluding cost of furniture etc., complete complying with standard specification and as directed by the departmental officers at site work
962
-
-
Renewing the broken glass panes of 4mm thick approved quality including fixing over existing iron window shutter in position using metal paste etc., complete complying with standard specification and as directed by the departmental officers.
50
-
-
Revarnishing with wood work with two coats of best melamine varnish of approved quality and brand including preparation of surface etc.. The rate is inclusive the cost of all material, labour charges and finishing neatly etc., complete compluing with standard specification and as directed by the departmental officers
1781
-
-
Supplying and Erecting Pull and Push type Rolling Shutter with ISI make of approved size and section using 18 GI Sheet. The Shutter Shall be Painted with one coat of redoxide Primer and the rate inclusive of hood covers,transportations charges etc. Electrically operated type (Exceeding 12 Sqm Area)
139
-
-
Removing the existing vegetation growth in the Building by way of uprooting the plants manually and then drilling with power driller up to the root depth of plants obtain a clean and neat drill so as to continuously inspect and remove left over roots of vegetation growths and to inject pesticides into the holes so as to prevent further growth of vegetation in the future to safeguard the country old heritage building etc. The cost including the cost of pesticides used, hire charges of injecting machine for injecting chemicals, cost of tools and all labour charges, etc., complete and complying with standard specification and as directed by the departmental officers.
-
-
-
Small plants
20
-
-
Medium Plants
30
-
-
Big Plants
20
-
-
Cleaning cut stones using mild hydrochloric acid and powder of approved brand and quality using high pressure gage gun with compressor machine with necessary scrapping charges for old painting materials and other unwaned silt and dust after cleaning with smooth surface from bottom to top cut stone with good looking , condition without any damage of the existing stone of the heritage building . the rate is inclusive of cost of materials, labour charges, transporting charges and hire charges for compressor machine and pressure gauge gun machine set with necessary lifting charges etc., complete as directed by the departmental officer.
756
-
-
Repairing the Aluminum Powder coated Letter size of 12" including Dismantling the letter from its position with necessary scaffolding, drilling and cutting the corroded bolts and nuts taping the screws and fixing the new bolts, coating the letter Gold coati8ng paint ISI mark with complete satisfaction of officer incharge (Rate including cost of Labour, Scaffolding, Cost of Material accessories, Gold Coated paint etc.,)
-
-
-
Aluminium Powder coated Letter
114
-
-
Government Emblem
2
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
45
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water Gutter pipes having a pressure of 6kg./sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
265
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water Gutter pipes having a pressure of 6kg./sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
8000
-
-
Supplying and fixing in position of Shade Net (Green Net) using vertical protection for under construction / High-rise building. The net standard size is 3mx50m &5mx50m. The rate is inclusive cost of Agro Shade Net, binding wire(or) cable tie, Labour charges for fixing in position and neatly etc complete complying with standard specification and as directed by the departmental officers.
5155
-
-
Labour charges for supplying and fixing of hoisting machine by hire basis for lifting of all materials from ground to terrace and shifting of damaged unused materials from terrace to ground floor with necessary rope, heisting platform, motor, controller as per site requirement days etc., the rate is inclusive of hire charges for machine, labour charges for operating the machine and daily Bata and conveyance charges and dismantling and removing the same after completion of work etc complete with standard specification and as directed by the departmental officers.
48
-
-
Providing temporary barricading arrangements alround the the site using PPGI sheet of 0.47mmthick shall be fixed in the frame for made out of required height using 50mmx50mm x2.60mm square MS tubes vertical strut placed and Horizental 32mmx32mmx2.60mm thick M.S. tubes at 1.20m interval with necessary scews and welding including cost of conveyance of all required materials to work site, erecting work, cost of J- bolts washers, cement concrete bed 45cmx45cmx90cm in Plain Cement concrete 1:2:4 and including labour charges etc complete., The barricading arranagements are made to prevent the entry of public into the site is very dangerous due to the fallen roof with necessary door arrangements for staffs and labour etc.,complete and as directed by the departmental officers. [The barricade will remain in the same location till the completion of the project and No additional charges shall be paid for the extended period of contract]
1150
-
-
Collecting the scattered debris from the campus and conveying away the same to outside by lorry to a lead of 9km including loading and unloading charges and dumping in low places and leveling etc., Complete complying with standard specification and as directed by the departmental officers.
5000
-
-
ReWiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) ( legrend/ Equ)(SD-273)
194
-
-
ReWiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils (SD 275)
131
-
-
ReWiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) ( SD - 261)
61
-
-
Renewal by Supply and Fixing of 2 x 18W / 22W 4 Feet LED Fitting with 20W LED Tube Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells) (DATA- 1)
45
-
-
Renewal by Supply and Fixing of 1 x 18W / 22W 4 Feet LED Fitting with 20W LED Tube Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells) (DATA- 2)
37
-
-
Renewal by Supply and Fixing of 1 x 18W / 22W 4 Feet LED Fitting with 20W LED Tube Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells) (DATA- 2)
26
-
-
Renewal by Supply and fixing of Sleek down Light Philips Make Model No. DN296B LED 20S-6500PSU WH on ceiling with Connections (Data-4)
127
-
-
Renewal by Supply and fixing of the indoor commercial recessed mounted fitting Philips Make Model No. RS271B LED40/850 PSU –E WB on ceiling with suspension of chain with PVC unsheathed Copper leads from terminals to the fitting (Data-5)
108
-
-
Renewal by Supply and fixing of 235 W Flood Light Luminaire Philips Make Model BVP 483 LED 235 CW on wall with connections (Data-6)
6
-
-
Renewal by Supply and fixing of High Bay Philips make Model : BY515P LED250S 5700 NB PSU GR on Double Ceiling Height with connections (Data-7)
12
-
-
Renewal by supply and fixing of 150 W street light LED fitting complete with 65mm dia GI pipe (class-B)with 1 No.32mm G.I bendcomplete on the existing post/wall with SMC Box with 3 Core PVC unsheathed Cu.leads with with MS clamps and aluminium painting (data- 8)
15
-
-
Renewal by Supply and fixing of Mirror light fitting with suitable wall clamping and necessary connection (DATA - 9)
18
-
-
Renewal by Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb (SD - 83)
15
-
-
Renewal by Supply and fixing of 400mm sweep wall mounting Fan with suitable wall clamping and necessary connection (DATA - 10)
17
-
-
Renewal by Supply and fixing of 1200mm (48”) Sweep AC ceiling fan complete with stepped Electronic 300W regulator with 2 meter down rod on Existing hook.(DATA - 11)
25
-
-
Renewal by Supply and fixing of 300 mm (12") sweep (Light duty) AC exhaust fan complete without provision of hole in the wall (SD:115)
22
-
-
Renewal by Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan(SD -120)
22
-
-
Renewal by Supply and fixing of 20Amps DP plug and socket in sheet enclosure with 32A DP MCB inflush with wall with earth connection. (For AC plug) Legrand (MDS) /Hagger (L&T) make) ( SD-144)
7
-
-
Renewal by supply and fixing of 32A DP Sheet Steel Enclosure with suitable 32A DP MCB on wall with suitable necessary connection. (DATA - 12 )
12
-
-
Renewal by supply and fixing of 63A FP Sheet Steel Enclosure with suitable 63A fP MCB on wall with suitable necessary connection. (DATA - 13)
6
-
-
Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. (SD 336)
1202
-
-
Renewal by Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (for power plugs) (SD- 350)
3200
-
-
Renewal by Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (SD- 352)
1800
-
-
Renewal by Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. (SD - 358)
3400
-
-
Renewal by Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour. with Electrical connections( For TPNMCB DB) (SD - 346)
2000
-
-
Renewal by Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5sq. Mm copper wire with painting of suitable colour (SD - 54)
2300
-
-
Renewal by Supply and clamping of 31/2 x 240 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.(SD - 208)
360
-
-
Renewal by Supply and laying of 3-1/2 x 240 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 Mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD - 190)
167
-
-
Renewal by Supply and fixing of brass cable gland for 3-1/2 x 240 sq.mm. PVC LTUG armoured cable with earth connection(SD - 172)
10
-
-
Renewal by Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (Data)
10
-
-
Renewal by Supply and Run of 25mm x 3mm Tinned Copper flat with necessary clamps/ supports on wall/ground to earth connections(SD - 76)
240
-
-
Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End(Like Legrend/ Hager make) (SD - 518)
12
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.(SD- 577)
2
-
-
Renewal by Supply and fixing of Three Phase 4 Way Vertical TPN DB IP43 Protection Metal Door , with 100A 4 pole MCB Isolator as incoming and 4Nos 63A TPMCB as Outgoing on Wall with angle iron frame work with earth connection only. The MCCB DB and MCB’s should be with ISI mark. (Like Legrend/ Hager make) (DATA - 14 )
4
-
-
Renewal by Supply and fixing of Three Phase 4 Way Vertical TPN DB IP43 Protection Metal Door , with 100A 4 pole MCB Isolator as incoming and 12Nos 32A SPMCB and as Outgoing on Wall with angle iron frame work with earth connection only. The MCCB DB and MCB’s should be with ISI mark. (Like Legrend/ Hager make) ( DATA - 15 )
4
-
-
Renewal by Supply and Erection of 400A Capacity cubical panel board made out of 16SWG sheet Steel enclosure with AI Frame support , Bare channel, Chambers for BOS, cable and switches etc., with 1Coat of Red oxide Primer and 2 Coats of anti corrosive enamel paint ,SMC supports , interconnection of all switches with Bus & Earth using suitable sizes of TC Flats, 1No. Danger board etc complete and with the following
4Runs 2” x ¼ “ TC Flat for RYB& N
4Runs 1”x 1/2 TC Flat for Earth
1Set metering set comprising 1No
0-500V Voltmeter-1No
0-300A Ammeter with CT selector switches Kit-Kat Fuses , Indicators -1No
400A FP MCCB Switch-1No
250A FP MCCB Switch-5Nos(Data-16)
2
-
-
Renewal by Supply and Erection of 250A Capacity cubical panel board made out of 16SWG sheet Steel enclosure with AI Frame support , Bare channel, Chambers for BOS, cable and switches etc., with 1Coat of Red oxide Primer and 2 Coats of anti corrosive enamel paint ,SMC supports , interconnection of all switches with Bus & Earth using suitable sizes of TC Flats, 1No. Danger board etc complete and with the following
4Runs 1” x ¼ “ TC Flat for RYB& N
4Runs 1”x 1/8 “ TC Flat for Earth
1Set metering set comprising 1No
0-500V Voltmeter-1No
0-300A Ammeter with CT selector switches Kit-Kat Fuses , Indicators -1No
250A TPN Switch Disconnector fuse with interior only with HRC Fuses double break-1No 125A TPN Switch Disconnector fuse with interior only with HRC Fuses double break-5Nos
63A TPN Switch Disconnector fuse with interior only with HRC Fuses double break-3Nos (DATA - 17)
4
-
-
Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.(SD - 648)
2
-
-
Renewal by Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. ( legrend/ Equ) (SD - 373)
44
-
-
Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. ( legrend/ Equ) (SD - 397)
30
-
-
Supply and fixing of 1 no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.(SD - 421)
126
-
-
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . (SD-211)
20
-
-
Renewal by Supply and Fixing of UPVC trunking 50mm x 80mm with suitable flexible cover to draw Power mains on ceiling or wall with necessary opening in channels as required and covering with flexible cover complete. (DATA - 18)
700
-
-
Renewal by Supply and Fixing of UPVC trunking 150mm x 105mm with suitable flexible cover to draw Power mains on ceiling or wall with necessary opening in channels as required and covering with flexible cover complete. (DATA - 19)
650
-
-
Supply and fixing of 400 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.SD 655
3
-
-
Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.SD 653
4
-
-
Supply and installation of 2.0 TR capacity 3Star rated energy efficient capacity high wall mounting split Type Air conditioner unit Consisting of outdoor copper condensing unit complete with hermitically sealed compressor with R22 Refrigerant air cooled condenser, fan etc and 1No indoor Hi wall wall mounted 2.0TR capacity evaporator unit complete with cooling coil, blower Motor and connected accessories, control and Chord wire connecting Indoor and outdoor unit with drain pipe suitable for operation on 230V + 10% 50hz,Single Phase AC Supply with copper refrigerant pipe (Make: Carrier / Voltas / Blue star/ O General / Equivalent
8
-
-
supply and fixing of the 5 KVA capacity Automatic Voltage Stabiliser with time delay relay
8
-
-
Supply and fixing of Suitable angle Iron frame work to rest the outdoor unit.
8
-
-
Supply and fixing of 5/8”and 3/8 seamless Refrigerant copper piping with all required installations and accessories with drain pipe to make good as recommended by the manufacturer.(Extra Copper Pipe)
80
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%