Public Works Department Tender

Dismantling, repairing, Servicing, reassembling and extending the wooden 'U' shape conference table of size 5.00m x 2.50m using 25mm thick waterproof and termiteproof plywood, angles, screws fevicol and other accessories wherever necessary and finishing with compressed laminates of approved colour and design. The Extension of 'U' shape confererence table to a of size 0.75m x 0.75m x 0.75m at two ends is made with 25 mm thick waterproof and termite proof plywood, angles, fevicol, screws and other accessories wherever necessary and finishing with compressed laminates to match with existing table colour and design etc., complete The rate is including cost of materials, labour charges and dismantling wood wherever necessary and redoing the same to the original condition etc. complete and as directed by the departmental officers.

Dismantling, repairing, Servicing and reassembling of Auditorium chairs and Tip up plastic cover and refixing the same in its original position using screws and other accessories wherever necessary. The rate is including cost of materials, labour charges etc. complete and as directed by the departmental officers.

Dismantling, repairing, Servicing and reassembling of sofa set 3+1+1 with new fabric and refixing the same in its position using screws and other accessories wherever necessary. The rate is including cost of materials, labour charges etc. complete and as directed by the departmental officers.

Dismantling, repairing, Servicing and reassembling of office table using angles, screws fevicol and other accessories wherever necessary and finishing with mica sheet. The rate is including cost of materials, labour charges and dismantling wood wherever necessary and redoing the same to the original condition etc. complete and as directed by the departmental officers.

Renewing the damaged vertical blinds with new horizontal zebra fabric roller blinds of superior quality double ply plinds with 100% polister composition weight of 340 gsm / square metre and 0.40mm thick and finished width of 250cm with 100% light transmission etc.,complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing curtains for doors and windows made out of cotton fabric, required pattern and colour in SS screen rod. The rate inclusive of pipe, material, accessories and labour charges for fixing etc.., complete.(The curtains should be got approved from the Executive Engineer before use on work)

Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete

Providing fully Glazed door using Frosted Toughened of 12mm thick with necessary accessories such as S.S door handle 25mm dia with 450mm long - 2 Nos, Floor spring - 1 No and furniture fittings, screws etc., Complete and as directed by departmental officers at site of work.

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

Aluminium Dye Cast Letters 9’’ size - UI code No.M-0692/24-25

Aluminium Dye Cast Letters 6’’ size - UI code No.M-0692/24-25

Emblem

Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.

Providing backdrop and showcase arrangments of size 3.15m x 2.85m with following specification; i) providing book shelves of size 0.45m x 2.00m with five compartment using 19mm thick water proof and termite proof plywood on both sides of backdrop arrangements and finishing with 0.80mm thick Mica sheet . ii) providing storage unit of size 3.15m x 0.85m with provision of three cupboard compartment and shutter arrangements using 19mm thick water proof and termite proof plywood on bottom of backdrop arrangements and finishing with 0.80mm thick Mica sheet iii) providing backdrop arrangements of size 2.30m x 2.00m using 19mm thick water proof and termite proof plywood with provision of 1mm thick polymarble sheet of size 2.30m x 0.50m on top and bottom of backdrop and rest of center portion of size 2.30m x 1.00m finishing with 8.00mm thick Euro Pratik WPC fluted louvers / Equivalent type etc., The Rate inclusive of cost of Material , labour charges for required size cutting and fixing etc.,complete and as directed by departmental officers.

Supplying and fixing of room divider using 25mm thick WPC board with approved CNC pattern supported on the Aluminium frame of 50x50mmx2mm thick, covered with plywood of best quality and approved colour and design etc., Rate inclusive of cost of WPC sheet , labour charges for required size cutting and fixing,furniture fittings etc., complete and as directed by departmental officers.

Supplying and fixing with new one of 35mm thick solid core flush door shutters lipping alround 35mm thick binded with liquid phenol formaldehyde with resin and including labour charges for fixing the shutter to the frames and for fixing anodized alu. furniture fittings such as bolt hinges 125x30mm one no of aldrop 250 mm long and 16mm dia Tower bolt 250mm x 150mm x 150mm long each one handle 100 mm one no of rubber bush 40x 60 mm one no of number of door stopper to the shutters materials and labour etc., including varnishing two coats as directed etc. complete complying with standard specification cost including all size of 0.90 x 2.10m

Total in Figures