Public Works Department Tender

Painting Two coats of best approved quality and approved variety of Plastic Emulsion paint of ISI mar over the Old wall surfaces in all floor without priming coat etc., complete complying with standard specification.

Supplying, Fabricating, erecting and fixing Hilux (or) equivalent Gyp Board FALSE CELING upto a ceiling height of 4.50 m from floor level using Hilux board Perforated sheet 10mm thick which includes shaped GI channels of size 25 x 25 x 0.50 mm thick suspended from ceilling at 1.2 m both longitudinal and cross vertical support and fixing shaped GI channels of size 50 x 30 x 0.50 mm and 150 x 10 x 0.50 mm thick at 0.60m centre longitudinal and cross difrection for vertical supports and fixing U shaped GI channels of size 50 x 30 x 0.50 mm thick and 50 x 10 x 0.50 mm thick at 0.60 m centre to centre in cross direction and respectively for horizantal supports of zig - zag pattern and fixing of Gyp board in the panel provided in the desing pattern given and sprating the standard spection and as directed by the departmental officers. The rate shall be inclusive of finishing the edges and wall junctions with suitable lipping and cornice arrangements.

Supplying and Fixing of Arrangement of a New Display Showcase for the display of Museum Artefacts, at the size of 7 feet height, 8 feet length, and 4 feet Breadth. Using Materials 18mm, 12mrn Plywood Imm thick Teakwood Texture Laminated, 8mm clear toughened glass with Anti-reflective coating. As per the following Specification. Provide a Bottom Box at the size of up to 2.5' ht from the floor finished level, 4 feet in Breadth. The top Belmate provides 9 Inch height. all exposed surfaces are covered with Imm laminate. provides 8mm clear toughened glass with an Anti-reflective coating. provided with an openable door with necessary fittings like hinges, handles, and locks. The Rate includes materials, labour, and transportation, etc., as per design. Size -7 ft Height, 8 ft Length, 4 ft Breadth- 1 NO

Providing Making of Talking tree of 2.50m height and trunk width 1.50m, using Good quality of metal frame+ advanced silicon rubber+emectrical motors electric o;tage of 220/110 v 50/62 hz for transform infrared sensor control. 1 Eye blinking, 2. Mouth opening and closing,3. Eyeballs turning, eyes opening and closing, 5. Eyebrows moving, 6. Hand branches bobbing up and down on boyh sides,7. Top branches spreading out in all directions speakin sounds etc., Including cost of all materials, transporion and labour charges for fixing the same in position at site of work etc., complete complying with standard specifications.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25 mm dia UPVC pipe

Statue Shifting and Placing Shifting the Statue by Crain and manual power. Applying chemicals to the statue's bottom and side. Rolled the Stretch Film. Will be placed the statue in the proper position with the proper guidance expert.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of size 25 mm dia including cutting, threading and fixing UPVC specials such as Elbows, Tees, reducers, Plug, Union, Bend, couplers, Nipple, Gate valve, check valve wherever necessary of the using PVC adhesives and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. (Above Ground Level) (External Water Supply)

GST @ 18 %

Supplying and fixing 28mm thick WPC Door Shutter with WPC frame of size 75 x 60mm with suitable rebate for housing the shutter,including cost of all furniture fittings such as aluminium aldrop of size 250 x 16mm-1 No., aluminium tower bolt 250 x 12mm-1 No., aluminium 'D' type handle 200mm-1 No., etc., complete, as directed by Departmental Engineer and drawing.

110mm dia PVC soil / waste pipe

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position 15mm dia Stainless steel Health facet (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Health facet should be got approved by the Executive Engineer before use on the works)

Supplying and Fixing of Arrangement of a New Display Showcase for the display Of Museum Artefacts, at the size of 7 feet height, 8 feet length, and 9 Inches Breadth. Using Materials 18mm, 12mm Plywood Imm thick Teakwood Texture Laminated, 8mm clear toughened glass with Anti-reflective coating. As per the following Specification. Provide a Bottom Box at the size of up to 2.5' ht from the floor finished level, 9 Inches in Breadth. The top Belmate provides 6 Inch height. all exposed surfaces are covered with Imm laminate. provides 8mm clear toughened glass with an Anti-reflective coating. provided with an openable door with necessary fittings like hinges, handles, and locks. The Rate includes materials, labour, and transportation, etc., as per design.

Making of Vellore Fort Site model work ,for Baseboard Apprasmate size 6' X 6' Sutable Scale All Detail Your Requrments as per Site plans, Elevation Site photos & VIEWS, Showing details. Showing Elevation Details in All Side & ,Water ponds, Fort boundary wall ,With Pillars, Temple work details, outer Roads , Inner Road , Set back , Landscaping Details , & Terrace deatiols ,other green space Areas,& Important Site locations in the modelDetails Etc.. Using Woodens Baqe board ,form board, plastics materials Colour paint, Electral Lighting Materials, and Trees,landscaping material etc Supply & Providing GlassCoverBox ,Model with Stand cutting and fixing Names, Lenges woek Deails Etc.. Supply & Provinding the MODEL to Transport from Chennai To Vellore Site office.

25 mm dia Gun metal Gate Valve

Providing Making of Albert Einstein of 1.75 m height using Good quality of metal frame+ advanced silicon rubber+emectrical motors electric o;tage of 220/110 v 50/62 hz for transform infrared sensor control. 1 Head move left and right (not rock), 2. Mouth opening and closing, 3. Eyes move left and right 4. Arms move up and down, 6. Body move left and right etc., Including cost of all materials, transporion and labour charges for fixing the same in position at site of work etc., complete complying with standard specifications.

Supplying and fixing in position best quality and approved make Indian made White glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Painting Old wood work with two coats synthetic enamel paint of approved quality and colour over the existing priming coat in all floors. The rate is inclusive and scaffolding charges etc., complete complying with standard specifications.

Supplying, fixing of cylindrical vertical notational polythene water storage tank of 1000 litres capacity confirming to I S. 12701 / 96. the tank is meant for outer (or) indoor, use complete with removable hinged top locking arrangements and to make provision to fix with simply pipe lines necessary manhole with cover and including all PVC specials, plugs, screws, nails to fix the tank etc., and the tank should be fixed firmly as directed. The rate shall inclusive of all materials labour, conveyance, hoistings and fixing charges etc., (The water tank should be got approved by the Executive Engineer before use on works by the departmental officers.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

Supplyig and fixing of PVC vinyl flooring of ISI grade, 2mm thickness of approved shade after removing the existing damaged flooring Composition, Vinyl in Nature, Durability: Excellent complying B.I.S Standards, Fire resistance, should not support combustion, Sound Absorption : 5 db • It should not be affected by petrol, alcohol, alkali, 5% acids & cooking oil, Fungi & bacteria resistance including labour charges etc complete

Supplying and Fixing of wall Paneling Highlighting History and Monuments in and Around Vellore district. Using materials is 65 mm x 40 mm x 1.5mm Heavy Duty aluminium Channel, and 8mm Commercial Plywood 1 mm laminate, as per the following specification. Make a Frame in Aluminium Channel and Self Screw Through it. 8mm Commercial Plywood in the Frame and Pasted with Imm laminate with necessary grooves and patterns as per design. The Rate included Transportation, Fixing and Labour Charge Ext., Complete.