Public Works Department Tender

Supplying and placing of Steel Rack of size 6.5' H x 3'L x 12" D with 14 gauge leg, 18 gauge sheet bold and nut fitting rack, etc.

Supplying and placing of Steel Cupboards without mirror 6.5 feet height with Painting heavy gauge Steel Beero with door.The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of Steel Pigeon Rack 4 Chamber with Painting heavy gauge Steel with door. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of Steel Pigeon Rack 6 Chamber with Painting heavy gauge Steel with door. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of 3 Seater Sofa Providing sofa with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with fireproof cloth or leatherride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of Single Seater Sofa Providing sofa with basic Silver Wood framework. The seat have flat type High Density cushions placed on the seat, back rest with fireproof cloth or leatherride. Bottom Legs with Floor Adjustable bush model sofa. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of Wooden Tea poy of size 3 x 1.5. The polish shall be non-water based stain polish with melamine finish for longer life and smooth finish. All the underside or non-visble timber surfaces finished with wax polish.

Supplying and fixing of "L" shaped reception table made of I 8mm MR grade plywood of Is303 standard laminated on both sides and edges od the table are completely covered with edgr tape, which consists of a draw and othe side cupboard, the accessories used would be of Woods make and Lakshmi Make for the reception area including material , labour etc.., Length of 5 x 7

Supplying and placing of Admin Table.Teakwood with Melamine polish The rate includes the cost of material, labour for manufacturing, etc.

Supplying and placing of Oval Conference Table 12 X 4 made out of Teakwood with melamine polish. .The rate includes the cost of material, labour for manufacturing, supply and Transportation etc.,

Supplying and placing of S Type Chair with back in frame covered with breathable Mesh in black for back, with arm steel frame and leg chair 14 gauge CR round pipe legs, 18mm compressor plywood for seat with 3” thick high density foam covered with fireproof cloth, fixed arms, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing of Red Cushion Chair with arm steel frame and leg chair with cushion, 3'' 18 gauge CR round pipe legs, seat and back high density molded cushion, upholstery fire proof cloth, arms are PU soft pad, legs have nylon bushes. The rate includes labour for manufacturing, supply, transportation, etc.

Supplying and placing of Carved Wooden Chair with Cushion and the legs are teak wood of first quality and the rate includes labour for manufacturing supply, transportation, etc.,

Supplying and placing of Black Revolving Chair with back moulded frame covered with breathable mesh in black, 18mm compressor plywood for seat with 3" thick high density foam covered with fireproof cloth, using center titling mechanism in up and down adjustments, fixed handle & bottm five frank chorome base with castor wheel finishing chairs. the rate includes labour for manufacturing, supply & Transportation etc.

Supplying and placing of Wooden Dining Table size of 4x 3 and Wodden Dining Chairs 4 Nos. The legs are teak wood of first quality and the top and sides shall be constructed out of 16mm thick teak wood board flush jointed the polish shall be non- water based stain polish with melamine finish for longer life and smooth fisih. All the undersides or non-visible timber surfaces finished with wax polish.

Supplying and placing of Computer Table of size 3 X 2 Table Tops and legs made out of 25mm and 18mm thick Commercial Plywood with both side laminate finish, all exposed edges are Machine pressed Edgebanding finish. The rate includes the cost of material, labour for manufacturing, etc.,

Supplying and placing of Nilkamal Plastic Chair with armrest The rate includes labour for manufacturing, supply, transportation, etc. as per approval colour by the departmental officers.

Supplying and placing of Brown Rexine Chair with arm Executive type roller with cushion, seat and back high density molded cushion, upholstery fire proof cloth, arms are PU soft pad, legs have roller. The rate includes labour for manufacturing, supply, transportation, etc.,

Supplying and placing Steel Shoe Rack of size 3.5' H x 4' L x 10" D with 1 inch square pipe leg, with 5 plates made out of 20 gauge sheet coating : 70 micron powder coated after the treatment of seven tanks cleaning process and Necessary bushes to be fixed, The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers. etc.,

Supplying and placing of Revolving Steel Stool top made out of plywood with foam covered by rexine. Height adjustable hydraulic at the bottom five frank metal base with wheels. The rate includes cost of all materilas fabrication, tramports and other incidental charges, including providing in the position as directed by the departmental officers.

Aluminium Composite Panel (ACP) with MS Fabrication: Providing and fixing MS fabrication structure using MS Tubular section and MS angles with required Anchor plates and Anchor fastners. The MS fabrication structure shall be covered using Aluminium Composite Panel (ACP) having 50 x 25 frame work vertical and horizontal specially designed extruded section fabricated and fixed at all level elevation and heights. The rate shall includes necessary clamps and screws and fittings. Rate shall include 3 mm thick ACP sheet (0.25+2.5+0.25) fixing with spacer tape and silicone sealent dowcorning 789. ACP gaps shall be filled with wheather sealent and backer rod to ensure water tightness in all complete complying with standard specification as directed by departmental officers.

Supply, Installation, and Commissioning Of LED Signboard In English Language For Periyar Government Hospital. The Signboard Is Made Using ACP For The Front Side and Coated 0.5mm GI Sheet for the Back side of the Sign Board. Acrylic Letters and GI Base Letters Or WPC Letters and Illuminated Using 12v Led 3 SMD 5630 IP 67 Modules Of 1260 Modules. The 12V LED Modules With Acrylic Letters is Powered Using 4 Nos of 400 Watts 12V Drivers and The Driver Will Be Placed In 2 Nos Of DB Box With 90 Meter Dc Wiring To Install The LED Signage Letters. The Signboard will be Erected using Six pillars in the front side and the Terrace it will be fabricated using 3 inch x 3 inch MS Square Tubes with 1.6mm wall thickness and fixed in Terrace using 10 mm Thick MS Plate of 8 inch square and anchored using 5 inch Anchor Bolts. The Front six MS pillars will be supported using 3 inch x 3 inch Square Tubes as a back support and will be fixed in the terrace using 8 inch 10mm square MS Plate and Anchored

using 5 inch Anchor Bolts. The Sign board will be supported using MS Angles as runners in the top and bottom of the sign board. The Existing Parapet Wall will also be anchored and Supported for the front Pillars. The MS structure will be Painted using one Coat of Primer and Two Coats of Outdoor Paints.

Supply, Installation, and Commissioning Of LED Signboard In in Tamil Language For Periyar Government Hospital. The Signboard Is Made Using ACP For The Front Side and Coated 0.5mm GI Sheet for the Back side of the Sign Board. Acrylic Letters and GI Base Letters Or WPC Letters and Illuminated Using 12V LED 3 SMD 5630 IP 67 Modules Of 940 Modules. The 12V LED Modules With Acrylic Letters is Powered Using 3 Nos of 400 Watts 12V Drivers and The Driver Will Be Placed In 1 Nos Of DB Box With 70 Meter Dc Wiring To Install The LED Signage Letters. The Signboard will be Erected using 5 pillars in the front side and the Terrace and it will be fabricated using 3 inch x 3 inch MS Square Tubes with 1.6mm wall thickness and fixed in Terrace using 10 mm Thick MS Plate of 8 inch square and anchored using 5 inch Anchor Bolts. The Front 5 MS pillars will be supported using 3 inch x 3 inch Square Tubes as a back support and will be fixed in the terrace using 8 inch 10mm square MS Plate and Anchored

using 5 inch Anchor Bolts. The Sign board will be supported using MS Angles as runners in the top and bottom of the sign board. The Existing Parapet Wall will also be anchored and Supported for the front Pillars. The MS structure will be Painted using one Coat of Primer and Two Coats of Outdoor Paints.

Supply, Installation, and Commissioning Of LED Illuminated Tamil Nadu Government Logo, or other logo For Periyar Government Hospital. The Signboard Is Made Using ACP For The Front Side and Coated 0.5mm GI Sheet for the Back side of the Sign Board. Acrylic Letters and GI Base Letters Or WPC Letters and Illuminated Using 12v Led 3 SMD 5630 IP 67 Modules Of 320 Modules. The 12V LED Modules With Acrylic Letters is Powered Using 1 No of 400 Watts 12V Drivers and The Driver Will Be Placed In 1 Nos Of DB Box With 20 Meter Dc Wiring To Install The LED Signage Letters. The Signboard will be Erected using 5 pillars in the front side and the Terrace and it will be fabricated using 3 inch x 3 inch MS Square Tubes with 1.6mm wall thickness and fixed in Terrace using 10 mm Thick MS Plate of 8 inch square and anchored using 5 inch Anchor Bolts. The Front 5 MS pillars will be supported using 3 inch x 3 inch Square Tubes as a back support and will be fixed in the terrace using 8 inch 10mm square MS

Plate and Anchored using 5 inch Anchor Bolts. The Sign board will be supported using MS Angles as runners in the top and bottom of the sign board. The Existing Parapet Wall will also be anchored and Supported for the front Pillars. The MS structure will be Painted using one Coat of Primer and Two Coats of Outdoor Paints.

Supply, Installation, and Commissioning Of LED Sign Board in Tamil and in English Language for Super Speciality Block at Periyar Government Hospital. The Signboard Is Made Using ACP For The Front Side and Coated 0.5mm GI Sheet for the Back side of the Sign Board. Acrylic Letters and GI Base Letters Or WPC Letters and Illuminated Using 12v Led 3 SMD 5630 IP 67 Modules Of 640 Modules. The 12V LED Modules With Acrylic Letters is Powered Using 2 No of 400 Watts 12V Drivers and The Driver Will Be Placed In 1 Nos Of DB Box With 40 Meter Dc Wiring To Install The LED Signage Letters. The Signboard will be Erected using metal clamps on the Canopy.

Supply, Installation, and Commissioning Of The Titanium Gold Letters in Tamil Language will be MADE USING Titanium Gold Letters and fitted using Stainless Steel Clamps and Studs on the Wall.

Supply, Installation and Commissioning of Double Sided and Single Modular Signage Board Tamil and English Language is Made using 1 inches Modular signage Profiles in Rectangular or Square Shaped and Sized at 22inches in length and 8 inches Height. An Acrylic/Polycarbonate/ACP sheet with a thickness of 2mm is UV Printed with a Background Color will be fixed in Wall above each Rooms. The Signage Board will be fitted and fixed using required clamps based on the site requirement ( As Per Approved by departmental officers)

Supply, Installation, and Comissioning of Double Sided Illuminated Modular Signage Board is Made using 4 inches Modular signage Profiles in Rectangular Shaped customized to required sizes. An Acrylic/Polycarbonate sheet with a thickness of 2mm is UV Printed with a Background Color will be fixed in both the sides of the Aluminium Profile. The UV Printed Acrylic Sheet is Illuminated using High Power LED Modules with IP 65 Protection . The Signage Board will be fitted and fixed using required Pipes and clamps based on the site requirement and Hanging or Wall Mounted with double sided view as instructed by departmental officers.

Supply, Installation, and Commissioning Of The Titanium Gold Letters in Tamil & English Language will be MADE USING Titanium Gold Letters and fitted using Stainless Steel Clamps and Studs on the Wall.

Supply and Installation of 3M Glass Performance Film : 3M Frosted white Crystal film 7725- SE-324 (Approved Floral Design Digital plotter cut and Installed). etc

Supply and Installation of Wall Murals with 3M Over lamination Film Approved design printed on HP latex (Application direct unfinished Painted wall)

GST at 18%