Nuclear Fuel Complex Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Oct 2024
Closing Soon25 Nov 2024
Tender Amount₹ 1,52,00,000
Costs
EMD
₹ 3,04,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NFC_832785_1Tender No
C/1365/2024Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Detailed technical Specifications for flag mast.
Declaration and acceptance letter By Contractor
BOQ Items
Beyond 1.50 m depth upto and including 3.00 m depth from average ground level.
50
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead within NFC complete as specified and directed by EIC
115
-
-
Supplying and filling of approved murrum soil in pits, trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, levelling, complete as specified and directed by EIC
750
-
-
Lead charges for for the 1st 1 KM or part thereof additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively
-
-
-
a) For soil for 1KM lead.
75
-
-
b) For Debris/rock 1Km lead
25
-
-
II. CONCRETE (PLAIN AND REINFORCED) :
-
-
-
Plain Cement Concrete (P.C.C) 1:3:6 by insitu mixing using Weigh Batching or RMC using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 with Minimum Cementitious Content not less than 250 Kg/Cum (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed. Note: 1.The blended cement i.e., PPC shall not have more than 35% of pozzolanas
70
-
-
Reinforced Cement Concrete by insitu mixing using Weigh Batching or approved RMC of Grade M - 30 (Minimum Cementitious Content not less than 350 Kg/Cum) up to specified level using using Ordinary Portland Cement(OPC) conforming to IS 269 or Portland Pozzolana Cement (PPC) conforming to IS 1489 Part-1 (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. FOSROC ,SIKA,BASF,CICO in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.
-
-
-
a) Below FFL
25
-
-
b) Above FFL
65
-
-
Providing and mixing anti corrosive chemical inhabitors of KPCOM-K 200 of M/s Krishna Conchem or approved equivalent in the concretes areas.
125
-
-
III. FORM WORK :
-
-
-
Providing centering and shuttering using good quality densified film-faced Plywood of at least 12mm thick approved make conforming to IS 4990 so as to produce neat form finished concrete surfaces, with steel staging system formwork (Doka/L&T/RMD/Paschal/PERI/MEVA/MIVAN system or any other approved by EIC) will have to be used for all structural elements, including strutting and propping etc. at all levels / heights including clear storey heights and removal of the same and including sealing the form joints suitably to avoid fins and abrupt irregularities, etc.complete all as per drawings and specifications and as directed by the Engineer-in-Charge.
-
-
-
Note: 1) This item is applicable for all PCC and RCC structural elements like footings/raft, columns, tiebeam, plinth beam, basement slab etc., for all heights/levels. 2) Only steel scaffolding, staging, supporting system to the formwork will have to be used for all RCC structural elements for all floors & at all levels/heights. 3) All surfaces adjacent to EPs, etc., shall be in true line and level & irregularities, if any, shall be rounded by mechanical grinding, chiseling, finishing the same using epoxy silica sand mortar (M/s. FOSROC/M/s. Dr. Fixit or other approved make by EIC) at no extra payment. 4) The design and drawings of formwork shall be submitted alongwith calculations for approval before commencement of work. 5) Form finish F3 shall be provided to all exposed surfaces of the concrete. 6) Sacrificial Tie Rod (coil nut) only will be permitted to use in formwork at no extra cost, However, concrete cover should be maintained to the tie rods. (No through and through rods will be permitted) Sqm Doka/L&T/RMD/Paschal/PERI/MEVA/MIVAN system or any other approved make by EIC.
-
-
-
a) Below Finish Floor Level
75
-
-
b) Above Finish Floor Level
350
-
-
IV. REINFORCEMENT & STRUCTURAL STEEL
-
-
-
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag steel, Sail, JSW, JSPL make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and as per direction of Engineer- in-Charge.
14
-
-
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer/ make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys, cranes, manlifter or any suitable means, fixing in position, torquing and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
17
-
-
Supply, Fabrication and erection of Structural Steel work at all depths/heights using Square Hollow Sections/Rectangular Hollow Sections/Steel Tubes conforming to IS 4923/ IS 1161 for Trusses (Complete Truss system consisting of Trusses, Purlins, Bracings, Gusset Plates, Base Plates etc.,) and framed work, including transporting to site, cutting, hoisting, fixing of M/s. Tata, Vizag Steel, JSW, Appollo, SAIL of strength not less than Grade E 250 IS-2062:2011 including providing Bolts and Nuts and other accessories wherever required, arc welding with electrodes conforming to IS 814 of make Advani, D&H, Philips, erecting using derricks/pulleys, cranes, manlifter or any suitable means, fixing in position, torquin, surface preparation by cleaning with wire brush painting painting with 2 (Two) coats of synthetic enamel paint over One (1) coat of Zinc Chromate primer of make M/s. Asian Paints, Johnson and Nicklson, Berger, Nerolac, etc., complete as specified and directed.
3.5
-
-
Supplying, fabricating, erecting and fixing in position, foundation bolts using MS rounds conforming to IS 432 (Mild Steel Bars Grade – I)/ IS 1875 and suitable nuts including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels Complete and as directed.
40
-
-
V. BRICK MASONRY :
-
-
-
Brick work as per IS 2212 using fly ash bricks conforming to IS 12894 of Class Designation 7.5 and above as specified at height/depth mentioned below with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 6 crushed coarse Sand (conforming to IS 2116)} including raking out joints, curing, scaffolding etc., complete as specified and directed.
-
-
-
a) At all heights Above FFL
135
-
-
HALF BRICK masonry as per IS 2212 using fly ash bricks conforming to IS 12894 of class designation 7.5 or above as specified above FFL upto V floor level in partitions walls in cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 crushed coarse sand), including scaffolding, raking out joints, curing and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule
150
-
-
VI FLOORING :
-
-
-
GSB:
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator/approved means at OMC and compacting with vibratory roller of 8 to 10 Tons Capacity/approve means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).
25
-
-
a) Glazed Vitrified Tile Matt/Anti-skid of Size of tile 600 X 600mm.
35
-
-
b) Glazed Vitrified floor Rustic finish of Size of tile 600 X 600mm.
125
-
-
Providing & fixing glazed vitrified tiles polished finish of 8-10mm thickness of Size of tile 600 X 600mm for dado, skirting, wall tiles (thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid using suitable high polymer modified quick-set tile adhesives (Water based), close jointed and pointed with matching epoxy grout of required colour as required, complete as specified and directed.
Note: The payment for providing the high polymer modified quick-set tile adhesives will be done separately.
125
-
-
Providing and laying flamed/polished finish Granite stone in flooring/dado in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) for flooring and 12 mm thick bed of cement mortar 1:3 (1 cement : 3 crushed coarse sand) including special adhesive for dado laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, providing single/double nosing, making 3 no of grooves for saircase treads etc. all complete as specified and as directed
150
-
-
VII: DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
Providing wood work with CP teakwood in frames for doors & cupboards using II class teakwood at all heights above plinth level wrought framed and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
0.2
-
-
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick, BWR grade, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and pre-lamination of required design, colour and pattern including providing teak vineer of 0.8mm ( min) on both faces requisite finish providing and fixing under pressure with approved type adhesive 200 x 150 mm laminated sheet on both sides where mortice lock is fixed including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing &fixing ISI marked 4 nos SS butt hinges with SS pin size 125 x 63 x 1.9 mmwith screws, &fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
10
-
-
Suppplying and fixing of Stainless Steel 304 grade aldrop of size 16X300mm of Satin/Glossy finish of kich make or approved equivalent, using SS screws, complete as directed
128
-
-
Supply and fixing of Stainless steel door latch hook of glossy/matt finish with hook shaft length of 6 inches, fixing to doors/walls with SS screws for holding the door open, complete as specified and directed.
384
-
-
Supplying and fixing Stainless Steel grade 304, curtain road 25mm dia 1.20mm thick along with SS grade 304 brackets 25mm dia, 1.20 mm thick, using SS screws, PVC sleeves, complete as directed by EIC
1200
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
368
-
-
Supply and fixing of wall mounted powder coated GI/MS letter box of size 0.32mX0.25X0.075m of required color, fixing with SS screws, providing two set of keys of approved make, complete as directed by EIC.
Note: If the required size is not avaailable, next hgher size shall be provided.
128
-
-
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and Partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make(Jindal/Hindal/Alumin Co sections) conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size /rawl plugs and screws or fixing with clips, glazing with 4mm/5mm thick glass of float galls quality, aluminium butt hinges of approved make and size (wherever required), necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, cleat angles,aluminium snap beading for glazing/panelling, CP Brass/Stainless Steel screws, nuts, washers, weather strips, handles with locking arrangements making draining holes etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
100
-
-
Providing and fixing glazing with 5 mm thick glass of approved quality ( M/s Triveni, Saint Gobain, Asahi, Modi make) including PVC lining for door shutters / Windows as per the drawings and as directed. (Cost of Aluminium beading required for fixing glass shall be paid in basic item.) .
20
-
-
Providing and fixing factory made uPVC white colour sliding cum fixed glazed windows/ventilators of make Deltra/Aparna/Greentech comprising of uPVC multi-chambered frame three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing double glazing made of 6mm thick toughened glass with a 15mm gap dully filled with argon,, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc including providing and fixing double glazing made of 6mm thick toughened glass with a minimum 08 mm gap dully filled with argon. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge including Single / double glass panes and silicon sealant..
8
-
-
Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, Kirloskar, L&T, Jielong along with other accessories for On and Off, level switch ). connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
75
-
-
Providing and fixing factory made PVC door frame manufactured by M/s. Rajshri or approved equivalent of size 50 x 47 mm with a wall thickness of 5 mm made out of extruded 5 mm rigid PVC mitered at corners and joined with 2 nos. of 150 mm long brackets of 15 x 15 mm MS square tube, the vertical door profiles to be reinforced with 19x 19 mm MS square tube of 19 guage. The door frame to be fixed to wall using sheet metal GSK screws of 65/100 mm size including Providing and fixing 30 mm thick factory made PVC rigid foam paneled door shutter manufactured by M/s. Rajshri or approved equivalent made from MS tube of 19 gauge thickness, size 19 x 19 mm for styles and 15 x 15 mm for top and bottom rails covered with heat moulded PVC ‘C’ channel of 5 mm thick sheet and 30 x 50 mm wide form styles and 5 mm thick and 75mm wide PVC sheets fortop rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm thick PVC sheet fitted in MS frame welded sealed to the styles and rails with 5 x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive providing and fixing aluminium fittings like hinges 3nos,Handles 150mm 2 nos and 2nos baby latches for each door complete as directed. For toilet doors.
20
-
-
VIII. PLASTERING AND POINTING :
-
-
-
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
125
-
-
Cement plastering 15 mm thick for internal walls in cement morar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)} fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC and also other places wherever required over brick walls or concrete surface preparation of surface, steel/tubular scaffolding curing etc., complete as specified and directed.
800
-
-
Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level with 12mm thick base coat in Cement Mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)}, 8mm thick finishing coat in Cement Mortar1:3 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 3 River Sand (conforming to IS 1542)}, final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, curing, etc., complete as specified and directed.
450
-
-
IX. PAINTING:
-
-
-
Walls and ceiling painting with premium acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.of Asian or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger brand, manufacture and shade over two coats of approved primer at all heights above plinth level including preparing the surfaces, scaffolding and cleaning, etc., complete and as directed.
885
-
-
Painting exterior walls on sand faced plaster with two coats of Alkali & fungal resistance, dirt resistance exterior paint with comprehensive warranty of 5 years of required shade of Makes Asian - Apex Advanced or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete. Note :- Minimum Usage Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. or as per manufacturer's specification
410
-
-
X. MISCELLANEOUS ITEMS :
-
-
-
Supplying and fixing 3mm thick FRP Translucent sheets made from Thermo setting polyster Resin (Glass Fibre reinforced) UV Resistant, of confirming to BIS 12866 including all overlaps, mitering, fixing with GI J or L Hook bolt and nuts of 8mm dia along with required PU washers or powder coated self tapping screws etc., required for leak proof joints, cutting the sheets to the required size including safety net, roof walk ladders etc., complete as specified and directed by Engineer-in-Charge.
410
-
-
Supplying and fixing 3mm thick FRP Translucent sheets made from Thermo setting polyster Resin (Glass Fibre reinforced) UV Resistant, of confirming to BIS 12866 including all overlaps, mitering, fixing with GI J or L Hook bolt and nuts of 8mm dia along with required PU washers or powder coated self tapping screws etc., required for leak proof joints, cutting the sheets to the required size including safety net, roof walk ladders etc., complete as specified and directed by Engineer-in-Charge.
120
-
-
Designing Supply, Erection and commissioning of 30.5 metre high flag mast manufactured from high tensile steel plates confirming to IS 2062/ BS EN 10025 having minimum yield strength of 350N/Sq.mm continuously tapered, polygonal cross section, 20 sided as per specifications including M30 foundation bolts and flag mst accessories viz. double drum single gear winch, power tool, trailing cable, SS wire rope, Manual Operating Handle, Lightening arrestor, feeder panel, LED aviation lamp, 2 nos of LED flood lights mounted on 6m octagonal pole ,electrical system, cables, earthing terminals, 4 nos. 30X20 feet flags of polyester make complete including checking of design by NFC design team complete as specified in detailed technical specifications of flag mast and directed.
1
-
-
XI: WATER SUPPLY
-
-
-
Providing hoisting and installing at required elevation double layered moulded HDPE cylindrical vertical water storage tank of 10000 liters of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed
2000
-
-
XII. DRAINAGE
-
-
-
Providing & laying structured wall UPVC under ground drainage pipes & fittings (SN-8) of Ashirvad/Supreme make for sewer lines with encasing of following size conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, complete as specified and directed
-
-
-
a) 110 mm DN (SN 8kN/m²-SDR34)
40
-
-
b) 160 mm DN (SN 8kN/m²-SDR34)
50
-
-
Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B/Grade-A laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1to6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil / waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc.
-
-
-
a) 75 mm n.b. pipes Grade-B
50
-
-
b) 110 mm n.b. pipes Grade-B
40
-
-
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm.
-
-
-
a) 600x900mm
4
-
-
b) 450x600mm
2
-
-
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
a) 600x900mm
6
-
-
b) 450x600mm
2
-
-
Providing and fixing in position UPVC bottle Gully Trap of Supreme /Ashirvad make of 200 X 160mm sizes including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed.
5
-
-
Providing uPVC Floor Trap/ Multifloor trap of Ashirvad /Supreme make / Nahani Trap of 110 x 75 x 50 mm size size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed
10
-
-
Providing and fixing of best quality UPVC P trap conforming to IS 14735 for urinals of size 110mm X 110mm with 50mm water seal of Ashirvad /Supreme make with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed..
2
-
-
XIII. SANITARY ITEMS :
-
-
-
Providing and fixing coupled EUROPEAN WATER CLOSET of Parryware make/Hindware , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required.
3
-
-
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
-
Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. C-1010)/Parryware make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length with all tools, synthetic adhesive, gasket etc. removing the existing cistern if required, complete including connection to W. C.
4
-
-
Providing & fixing vitreous China undercounter/Overcounter Wash hand basin consisting following items of work:- i)Providing vitreous china wash basin conforming to IS 2556 ( part - IV ) and placing the wash basin in position as shown in the drawing or as directed. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin, conforming to IS 775 for Wall hung basin.( For wall hung wash basin) iii) Fixing Vitreous China under / over the counter / semi recessed type Wash Basin and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. ( For under/over counter wash basin ) iv) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin.. v) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge.
vi) C.P. brass waste of standard pattern, 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781., 32 mm CP brass bottle trap, with extension pieceincluding painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed
-
-
-
a) Vitreous China semi pedestal Wall hung Wash Hand Basin, 630x450 mm size of HINDWARE Make Studio model Cat. No:10096 & or equivalent.
3
-
-
b) Providing and fixing best quality vitreous chinaware under the counter WASH BASIN of size close to 605mm x 430 mm x 200mm , of make Jaquar(CNS-WHT-705)/Hindware/Parryware conforming to IS: 2556 Part IV including CP brass waste coupling etc., necessary supports, removal of wxisting wash basin if required, complete as specified and directed.
3
-
-
c) Vitreous China Loboratory sink with C.I brackets, C.P brass chain with rubber plug, 40mm C.P brass waste and 40mm C.P brass trap with necessary, C.P brass unions complete, including painting of fittings and brackets, cutting and making good the wall.
1
-
-
Providing and fixing as per IS 2556 flat back half stall urinal of size of 328x558 mm size of Hindware/Jaguar or equivalent for supporting the pan on suitable heavy quality CI wall brackets, 32 mm n.b. heavy quality, approved make CP brass bottle trap with extension piece, fixing with CP brass spreader and suitable heavy quality CP brass waste coupling to urinal basin, CP brass grating, spring based flush valve for operation of water flushing etc., complete as specified and directed.
3
-
-
Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
2
-
-
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed.
5
-
-
Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.
-
-
-
a) Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/Hindware make conforming to IS: 8931 on .CPVC lines- size 20mm.
5
-
-
b) C.P brass 2 Way Bib Cock with wall flange of Jaguar Cat.No. ORM 10041
3
-
-
c) Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-573) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed.
3
-
-
d) Providing and fixing CP Brass 32mm size heavy quality Bottle Trap of approved quality & make Jaquar (ALD-CHR-769L)/Parryware/ Hindware or approved equivalent, inluding extension pipe if required, removal of existing bottle trap if required, as per the direction of Engineer-in-charge.
4
-
-
e) CP brass waste coupling 32 mm size with 80 mm height as per Jaquar cat. No. ALD-705/709 for wash basin.
7
-
-
f) Providing and fixing 32mm/40mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
3
-
-
g) C.P brass single lever basin mixer of 'Jaquar' cat. No. ORM-10011B.
6
-
-
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.
-
-
-
a) Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553
3
-
-
b) Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
2
-
-
c) Stainless steel Towel Rail/Grab bar of Jaquar Cat. No. AHS-1507.
4
-
-
d) Providing and fixing SS 304 Cloth Hanger with four hooks, fixed to wall or doors with C. P. brass screws, screwed on to rawl plugs etc., complete as directed by Emgineer-in-charge.
4
-
-
e) Liquid soap dispenser Jaquar CAN 1135N
5
-
-
f) Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N
2
-
-
g) Towel Ring square with round flange of Jaquar Cat. No. CAN 1121N
5
-
-
XIV: DISMANTLING ITEMS:
-
-
-
Dismantling/breaking the existing plain cement concrete surfaces carefully in flooring, platforms etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
10
-
-
Dismantling very carefully the existing reinforced cement concrete at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores disposing the debris within the lead of 50 m complete as specified and directed for RCC pedestals.
10
-
-
Dismantling very carefully the existing Brick masonry in cement motor with plastering on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacing of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed.
5
-
-
XV: ELECTRICAL
-
-
-
Supply and installation of following light fittings with all mounting accessories like supporting hard ware etc as required to complete the installation in all respects
Makes: PHILIPS, WIPRO,BAJAJ
-
-
-
IP65 dust proof and water proof outdoor bollard of minimum 600mm height fitted with 10W LED light bulb with warm white light output. The bollard shall be made of Aluminium housing with corrosion proof construction with required base plate for mounting. (Similar model - Philips BCP100)
-
-
-
Supply
10
-
-
Installation
10
-
-
IP65 dust proof and water proof outdoor 7W LED garden spike with warm white light output. The light fittings shall be made of Aluminium housing with corrosion proof construction with required base plate for mounting on floor ( Similar model - Philips 31385 7W Garden spike)
-
-
-
Supply
10
-
-
Installation
10
-
-
Supply and installation of lightning spike (Fraklin rod) at the top of flagmast. The spike shall be bonded to the body of the pole and shall be connected to the earth pit by running a 6 Sq.mm copper cable internal to the pole from the top to the earthpit excluding the cost of cable and earthpit.
1
-
-
Supply and installation of vertical model double door 4 way TPN MCB Distribution board with minimum IP 43 with following components:
a. 63A , 100mA FP RCBO - 1 No Incomer
b. 36A TP MCB - 2 Nos
c. 10A SP MCB - 6 Nos
Makes of DB / MCB : LEGRAND, HAGER, SCHNEIDER, Siemens
DB is to be mounted in a IP66 weather proof box of suitable size made of 2mm thick powder coated CRCA sheet steel. This arrangement is to be mounted on a stand with required foundation nearer to the flag post.
-
-
-
Supply
1
-
-
Installation
1
-
-
Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches with all accessories
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED
-
-
-
4c 25 Sq.mm Al cable
-
-
-
Supply
100
-
-
Installation
100
-
-
4c 6 Sq.mm copper cable
-
-
-
Supply
100
-
-
Installation
100
-
-
3c 1.5 Sq.mm Flexible cable
-
-
-
Supply
100
-
-
Installation
100
-
-
1c 6 Sq.mm copper flexible cable
-
-
-
Supply
100
-
-
Installation
100
-
-
Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty weather proof glands, heavy duty long neck copper lugs etc complete
Makes: DOWELLS, JAINSON, HMI, COMET
-
-
-
4c 25 Sq.mm Al cable
2
-
-
4c 6 Sq.mm copper cable
4
-
-
Supply and installation of maintenance free earthing stations with copper bonded steel ground rod with around 20mm dia and 3 Mts long , Ground Enhancing Material (GEM), inter connecting earth tape between earthing stations and back fill material.Construction of masonary chamber of 450 x 450 mm with CI cover, earth station markers etc complete.
Pit should be as per IS 3043
Makes: ERICO, DEHN, JEF, OBO
4
-
-
Supply and fixing of 50 x 6 mm hot dip galvanised GI strip for earthing by clamping on walls/trays/trench with all required accessories
-
-
-
Supply
100
-
-
Installation
100
-
-
Excavation in ground for laying of cable structure foundations, consolidation, removal of excess earth, etc complete.
5
-
-
Supply and installation of 25 mm dia 1.8 mm thick AKG/ Sudhakar make PVC conduits and required junction boxes confirming to IS with accessories like bends, couplers etc in wall , false ceiling etc
complete
-
-
-
Supply
150
-
-
Installation
150
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%