Nuclear Fuel Complex Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Jul 2022
Closing Date4 Aug 2022
Tender Amount₹ 6,27,00,000
Costs
EMD
₹ 12,18,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_NFC_700500_1Bid Award Id
ViewTender No
C/1275/2022Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Declaration By Bidder
BOQ Items
Earth work excavation in foundations in Hard rock using wedging, chiselling or any approved method upto the depths specified below including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soils as directed, within a distance of 50 m etc., complete for foundations, plinth beam, strom water drain etc.
16
-
-
Earthwork excavation over Areas upto required depths in all kinds of Soils except Soft and Hard Rock in both dry and wet conditions, dewatering if necessary, backfilling with the approved excavated earth by the sides and in plinth by depositing in layers not exceeding 250mm in thickness, spreading, leveling, consolidating by approved means, dressing the bottom and sides to required levels, profiles, slopes, etc., disposing the surplus earth/spoils within a lead of 50m for settling tank, dosing tank, oil trap and grit chamber and Drying platform levelling the areas etc., Complete all as directed and specified.
-
-
-
a) Upto 1.50 m depth from average ground level.
840
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
630
-
-
Earthwork excavation over Areas upto required depths in Soft Rock in both dry and wet conditions, dewatering if necessary, backfilling with the approved excavated earth by the sides and in plinth by depositing in layers not exceeding 250mm in thickness, spreading, leveling, consolidating by approved means, dressing the bottom and sides to required levels, profiles, slopes, etc., disposing the surplus earth/spoils within a lead of 50m,for settling tank,dosing tank,oil trap and grit chamber ,levelling the areas etc., Complete all as directed and specified.
-
-
-
a) Upto 1.50 m depth from average ground level.
300
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
225
-
-
Earth work excavation over areas in hard rock by chiselling and wedging or any approved method, dressing sides, slopes and excavated surfaces to required profiles, levels and camber, filling extra cut pockets with cement concrete 1:4:8 using 20mm coarse aggregate at no extra cost to the Department including stacking the useful stones.
-
-
-
a) Upto 1.50 m depth from average ground level.
60
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
45
-
-
Filling available excavated earth ( excluding rock) in plinth , sides of foundation etc., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
700
-
-
Supplying & filling murrum brought from outside in floors, trenches, plinth, sides of foundation etc., in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1000
-
-
Providing and injecting chemical emulsion for pre-construction anti-termite treatment and creating a chemical barrier under and around column pits, foundations, wall trenches, basement excavation, junction of walls and floors and along external periphery of building using Chlorpyriphos/Lindane E.C. 20% with 1% concentration by weight, treating termite mounds within the plinth and contingent apron, etc., complete. Note: Plinth area of the building at ground floor shall only be measured for payment purpose.
2000
-
-
Lead charges for the 1 KM or part thereof for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively.
-
-
-
a) For soil for 1KM lead.
1200
-
-
b) For Debris/rock 1Km lead
200
-
-
II. CONCRETE (PLAIN AND REINFORCED) :
-
-
-
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed. Note: 1.The blended cement i.e., PPC shall not have more than 25% of pozzolanas. 2. Sand shall be manufactured sand.
340
-
-
Reinforced Cement Concrete by insitu mixing using Weigh Batching or RMC of Ultra Tech, Birla Ready Mix of Grade M - 30 (Minimum Cementitious Content not less than 330 Kg/Cum) up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed. Note: 1.The blended cement i.e., PPC shall not have more than 25% of pozzolanas. 2. Sand shall be manufactured sand.1150
-
-
-
a) Below FFL
315
-
-
b) Above FFL
325
-
-
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-20 insitu mixing BY WEIGH BATCHER using ordinary Portland Cement conforming to IS 8112 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes including formwork but excluding reinforcement.
Note: 1.The blended cement i.e., PPC shall not have more than 25% of pozzolanas. 2. Sand shall be manufactured sand.
20
-
-
III. FORM WORK :
-
-
-
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, etc.,
-
-
-
a) Below and Upto Finish Floor Level
1075
-
-
b) Above Finish Floor Level
2240
-
-
IV. REINFORCEMENT & STRUCTURAL STEEL
-
-
-
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
94
-
-
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
a) For Rolled steel sections
3
-
-
b) For M.S Plates
1
-
-
Providing and fixing MS wicketgate/ MS tubular gates single/ double leaves/wiket of required size alo ng with or without wicket gate , comprising 38mm nb medium quality steel tube frame with 65x10mm thick MS flat for horizontal, vertical and diagonal stiffeners, including welding flat to frame work, supplying and fixing/welding 50mm square hard drawn steel wire fabric of Sl no.2 (50x50x3mm) conforming to IS 1566 of standard make or its approved equivalent with 20mmx3mm thick MS flat welded to frame and providing necessary heavy duty ball bearing side hung hinges, lugs, latches, locking arrangements, pipe inserts and other fittings and fixtures necessary for smooth operation of gates, providing and fixing/welding MS spikes of 12mm square bars at not more than 150c/c, as directed by Engineer in charge.
70
-
-
Supplying, fabricating, erecting and fixing in position, insert plates/ embedded plates/pipes of GI in heavy quality conforming to relevant BIS2062/ 1239 of required shape and size, welding anchoring legs not less than 12mm dia MS rods, placing in position in concrete while casting, including painting with one coat of approved anti corrosive paint of shalimar product for embedded portion of pipe as per drawing in line, level and plumb complete as directed.
0.2
-
-
Supplying, fabricating, erecting and fixing in position, foundation bolts, through bolts etc. using MS rounds of make M/s Tata, Vizag Steel, Jindal or approved equivalent conforming to IS 432 and suitable nuts including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels complete and as directed by EIC.
0.2
-
-
V. PRE-ENGINEERING STRUCTURE :
-
-
-
Supply and Fabrication at Factory, Pre Engineered Frames, Purlins, Side cladding runners (Girts), sky lights, roof extractors, ventilators etc., by cutting, welding, straightening at workshop, conveying, assembling, erecting at work site at all levels by bolts and nuts including subsequent field welding, drilling, grinding, bolting wherever required and hoisting in position for structural steel work. The job includes provision of cold formed sectional members for Z purlins/girts, pre-engineered frames using M.S Plates, tie beams, catwalk, crane girders, platforms, ladders for the members wherever required as per design, suitable supporting system for fixing polycarbonate/translucent sheeting to prevent dislodging etc., complete as specified and directed.
-
-
-
a) Supply, Fabrication and Erection of Primary Structural Steel Members including rafters, columns, Crane Gantries, etc., of built up sections made out of M.S Plates having minimum thickness of 6.00mm and minimum strength not less than Grade E 350 and Quality "C" as per the Table -1 of IS 2062 : 2011 to relavent ASTM manufactured by M/s. Tata, Vizag Steel, Jindal, SAIL make including painting with 2 (Two) coats of synthetic enamel paint over 1(One) coat of Zinc Chromate primer of make M/s. Asian Paints, Johnson and Nickelson, Berger, Nerolac, etc., including welding with MIG/MAG welding in a well established workshop using electrodes or fillers of make M/s. L&T, D&H, Advani, etc., transportation of members to site, bolting/ welding at field by MIG/MAG, erecting members using suitable cranes/jigs/pulleys in line , level, plumb etc., complete as specified and directed. NOTE: The bolts used shall conform to A325 ASTM standards equivalent to 8.8 designation High tensile bolts conforming to IS 1367:2002
30
-
-
b) Providing and Fixing Secondary Structural members including Purlins, Girt members, Eaves, Struts, Ridges and other items made out of Galvalume cold rolled sheets of Z shape not less than 5mm thickness of strength not less than Grade E 350 and Quality "C" as per the Table -1 of IS 2062 : 2011 manufactured by M/s. Tata, Vizag Steel, Jindal, SAIL make including zinc coating not less than Z350, fixing to main members using Bolts and Nuts conforming to A325 ASTM standards equivalent to 8.8 designation High tensile bolts conforming to IS 1367:2002 including overlaps, etc., all complete as specified and directed. Note: Overlaps will not be measured for payment.
18
-
-
c) Providing and Fixing Trapezoidal profiled Galvalume Sheets for roofings and claddings using sheets in 0.5mm TCT (Total Coated Thickness) and strength not less than 350 N/Sqmm including flashings, corners, ridges, eaves boards, etc., of approved make including fixing the sheets with Stainless Steel self tapping, self drilling and self fastening screws, and EPDM Washers, etc., all complete as directed. a) Roofing with colour coated Galvalume sheets & Rain water pipes, etc. Note: Roofing and liner shall be done with insulative material in between. Insulation will be measured separatly. Note: Roof shall have double skin sheeting with in between insulation. The sheeting is measured separatly for top & bottom layers. Insulation will be paid under separate item.
2800
-
-
d) Polycarbonate Sheeting of 1.5 mm thick, Pressed to matching trough Corrugations of roofing of GE make, Everest or any other approved equivalent make for sky lights including sealing around sheets with GE Siliconates or any other sealants, treating for rain proof, fixing sheeting with SS self tapping screws etc., complete as directed.
275
-
-
e) Supplying, fabricating, erecting and fixing in position, foundation bolts using MS rounds conforming to IS 432 and suitable nuts including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels complete and as directed.
1
-
-
f) Providing and fixing insulation of 50mm thick fibre glass of make Pilkington/Twiga/Owens cornings of(500 guage of polyethelene sheeting) density 18Kg/Cum over liner sheeting for purpose of sound insulation including providing protection for moisture absorption fixing the pad with SS 304 mesh of 24gauage to purlins with suitable screw and washers complete in line level complete as directed.
1400
-
-
VI. STONE MASONRY :
-
-
-
Random rubble stone masonry using approved local stones in foundations/pedestals and plinth at and at all depths below finished floor level in cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed stone sand of grade conforming to BIS 2116, complete as specified and directed. (Stones to be used from the site)
10
-
-
VII. BRICK MASONRY :
-
-
-
Brick work using quality flyash (non modular) bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) at and at all depths below plinth level in foundation and in plinth, storm water drains, etc., simultaneous pointing with same mortar below ground level, and ranking out joints above ground level, curing etc., complete as per specifications and as directed for sub structure etc.,
110
-
-
Brick work using quality flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
500
-
-
Half brick masonry using non modular fly ash bricks of class designation 10, conforming to IS :12894 in partition walls in cement mortar 1:4 (1 cement :4 using crushed stone sand of grade conforming to BIS 2116) all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement. Note:- Reinforcement will be paid under relevant item.
170
-
-
VIII ROOFING :
-
-
-
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using
125
-
-
IX FLOORING :
-
-
-
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: Measurement for payment will be made based on levels for finished item of work). Stone shall be used from the site.
275
-
-
Providing and laying at all floors and levels 6mm (min) thick first quality glossy/ matt / antiskid/rustic / digital collection etc. ceramic tile flooring as per the approved pattern and colour as mentioned below conforming to IS 15622 latest of edition from approved list of maufacturers or equilvalent laid in cement mortar bedding / backing, close jointed and grouted with matching cement slurry to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings/cutout if necessary, wastage and final cleaning of surfaces as required, curing etc.complete all as per drawing specifications & as directed by Engineer in charge.
a) In flooring with rustic/matt finished/ 300x300mm, 600 x 600mm or equivalent approved sizes of ceramic tile laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
b) In skirting laid over 12 mm thick CM 1:3 backing. c) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
d) Sand shall be crushed stone sand.
e) Tiles shall be of make Kajaria/Regency/Somani/Jhonson & Jhonson
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
a) Anti skid ceramic tile with 300x300 or equivalent approved sizes of ceramic tile laid over 20/15mm thick cement mortar bedding 1:4. for toilets
290
-
-
b) In dado / clading with tile of size 200x300mm or size as per working drawing laid over 12 mm thick CM 1:3 backing for toilets.
410
-
-
Providing and fixing 18 mm thick Granite flooring/dado using slabs of gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse Msand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish incuding making holes, molding half round/full round nosing and grooves for antislippery measure etc. complete at all levels as specified and directed.
100
-
-
Providing and laying double charged vitrified floor tiles in 1000x1000 size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make like Kajaria/Regency/Somani/Jhonson & Jhonson , in all colours and shades, laid cement mortar , jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete for entrance foyer, corridors, lobbies, etc.
Note: i) Quoted rate shall include extra cement mortar required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
a) In flooring with rustic/matt finished 1000x1000 mm or equivalent approved sizes of double charged vitrified tile of make Somany/Kajari or approved equivalent laid over 20mm thick cement mortar bedding 1:4 ( 1 cement : 4 sand)
1190
-
-
b) In skirting laid over 12 mm thick CM 1:3 backing.
50
-
-
IX. DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
Providing over RCC flooring, grade slab when concrete is in green condition, finishing top with hard finishing coat using non – metallic floor hardener of Chhabdur or Hardtop or any other equivalent from M/s. Fosroc, STP, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT of approved quality and make at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor finish including spreading after vacuum dewatering, ramming, consolidation, finishing smooth using power trowel to required levels or slope as specified, curing, etc., complete as specified and directed with vacuum dewatering.
40
-
-
X: DOORS, WINDOWS & ROLLING SHUTTERS ETC :
-
-
-
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
a) Frame size 50 x 100 mm.
62
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid plain flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent, include providing and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, for each door complete as directed. For toilet doors all as per direction of engineer in Charge.
-
-
-
a) 30 mm thick.
20
-
-
Providing wood work with CP teakwood in frames for doors using II class teakwood at all heights above plinth level wrought framed and fixed in position including providing and fixing with suitable size of coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs and screws and coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete as indicated in drawings and as directed.
0.6
-
-
Providing and fixing in position double/single leaf flush door shutters of solid block board core, 35 mm thick, BWR grade, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and pre-lamination of required design, colour and pattern / teak vineer on both faces/ requisite finish providing and fixing under pressure with approved type adhesive 200 x 150 mm laminated sheet on both sides where mortice lock is fixed including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing &fixing ISI marked 3 nos SS butt hinges with SS pin size 125 x 63 x 1.9 mmwith screws, &fixing hinges supplied under relevant item to shutter and frame and complete generally as shown in drawings and as specified and directed for single door shutter / double door shutters.
25
-
-
Providing and fixing in position epoxy powder coated (minimum thickness of power coating 50 microns) aluminium sections/aluminium sections for fixed partition/wall span/ventilators/doors and sliding windows, etc., using extruded built up standard tubular and other sections of approved make (Jindal/Hindal/Alumin co sections as shown in the drawing or its approved equivalent sections) and confirming to IS 733 and IS 1285 of required available colour, manufactured to relevant IS Standard Specifications including applying Epoxy coating of required thickness, fixing with rawl plugs and screws or fixing with clips or with expansion hold fastners, glazing with 4mm/5mm thick glass of float glass quality, aluminium butt hinges of approved make and size (wherever required), necessary filling up of gap at junctions at top, bottom and sides with required PVC/Neoprene felt, etc, including cleat angles, aluminium snap beading for glazing/panelling, PVC lining, C.P Brass/Stainless steel screws, nuts, washers, weather strips, handles with locking arrangements making draining holes, etc., including providing and fixing other accessories with ISI mark wherever applicable to windows, fixing suitably with brick wall/RC column structures, filling the gaps between structural opening and aluminium frame work with polysulphide/GE Siliconates, generally as shown in architectural drawings and as directed (Glazing and Panelling to be paid for separetely).
1890
-
-
Providing and fixing glazing with 4 mm thick plain float glass (weight not less than 10kg/sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for ventilators.
140
-
-
Providing and fixing glazing with 5.mm thick plain float glass ( weight not less than12.50kg/sqm) of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC /EPDM lining as per the drawing and as directed for window shutters.
85
-
-
Supplying and fixing to wooden doors at and at all heights above plinth level approved 6 lever cylindrical mortice locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to single/double shutters for all doors
25
-
-
Supplying and fixing to wooden doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
a) using 250 mm long, 10 mm shoot.
40
-
-
b) Baby latch
26
-
-
Supplying and fixing to wooden doors at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
26
-
-
Supplying only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size75x45x3.2mm with cadmium plated wood screws of appropriate size etc., complete as directed
36
-
-
Supplying and fixing to wooden doors approved anodized aluminium aldrop conforming to relevant IS specifications and with ISI marking classic/ J.S.E. (ECIE) make or any approved equivalent of size 250 x 19 mm with suitable approved CP brass screws, machine screws or bolts for securing clamps from inside etc., complete as directed.
5
-
-
Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or approved equivalent confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.
35
-
-
Supplying and fixing to doors at and at all heights above plinth level approved best quality anodized extruded aluminium hanging floor door stoppers with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper.
40
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with stainless steel cover plate minimum 1.25 mm thickness etc. complete as per the direction of Engineer-in-charge.
22
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid board one side white colour and other side of board laminated with PVC foil of mimimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc., of required sizes comprising of virgin polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , minimum compressive strenth 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent,and fixing with stainless steel piano hinges/soft close clip on concealed hinges og required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- in- Charge.
75
-
-
Providing and fixing 50 mm special quality CP brass cupboard or ward robe locks with six levers of approved quality including necessar screws etc. complete.
4
-
-
Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
8
-
-
Providing and fixing 125 mm CP brass handles with screws etc. complete
8
-
-
Providingand fixing nickel plated M.S pipe rods with nickel plated brackets (heavy type).
5
-
-
XI. PLASTERING AND POINTING :
-
-
-
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
300
-
-
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 (1 cement :4 river sand) , and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
2440
-
-
Sand faced plaster 20 mm thick in 2 coats over exterior masonry and concrete surfaces at and at all heights above plinth level as given below with base coat in cement mortar 1:4 (1 cemen:4 sand) with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pedilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications, 12 mm thick and finishing coat in CM 1:3 (1 cement:3 sand), 8 mm thick, final rendering, making necessary grooves, bands, drip moulds as required, finished smooth internal putty(lapam) of Birla/Jk of not less than thickness 1mm(one) thicknes) double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as specified and directed.
1000
-
-
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete.
2740
-
-
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanada Chemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground drains etc.
470
-
-
Providing and laying integral cement based water proofing treatment of average thickness of 110mmm ( minimum 65mm thick) including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge.
310
-
-
Waterproof plaster of average thickness of 20 mm in two coats for concrete/brick surfaces (external/internal) (back coat and finishing coat of 10mm thick each) with water proofing agent @2% by weight of cement foir RC Gutter, complete as specified and directed for Chajjas.
270
-
-
XII. PAINTING:
-
-
-
Walls and ceiling painting with premium acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.of Asian or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger brand, manufacture and shade over two coats of approved primer at all heights above plinth level including preparing the surfaces, scaffolding and cleaning, etc., complete and as directed.
2740
-
-
Painting exterior walls on sand faced plaster with two coats of Alkali & fungal resistance, dirt resistance exterior paint with comprehensive warranty of 5 years of required shade of Makes Asian - Apex Advanced or equivalent in Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, external putty of Birla or its approved equivalent wherever required applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete. Note :- Minimum Usage Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. or as per manufacturer's specification
1000
-
-
XIII. MISCELLANEOUS ITEMS :
-
-
-
Providing and fixing SS railing made out of commercial chromium steel tubes SS 304, of various diameters, of approved make, 2 mm wall thickness, pattern as shown in drawing/as directed including supplying or fabricating, fittings like SS bends, tees, etc., welding the pipes using TIG welding or any other approved method, grinding/buffing the welded joints smooth, erecting the railing in position in line, level and plumb, fixing tailing in position by grouting/or any approved system, cleaning, polishing the joints if required, scaffolding etc., complete all as specified and directed.
90
-
-
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
90
-
-
Supplying, lowering, laying, mentioned below the nominal bore, RCC SPUN PIPES (Class NP2)/NP-4 conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.
-
-
-
a) 150mm NB NP-2
30
-
-
b) 300mm NB NP-2
25
-
-
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
12
-
-
Supplying and fixing GI Chain link fencing of required height with 50mm diamond mesh of approved quality and make with 3.15mm (10 guage) galvanized iron wires conforming to IS 2721 including unrolling, straightening, stretching, fixing tight to structural steel posts and struts erected in position by means of 6mm dia approved quality galvanized iron machine straightened rods at top and bottom horizontally throughout fence and vertically at every angle post, fixed with approved quality galvanized iron hooks, bolts, nuts and washers etc., complete as directed
575
-
-
Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of shrinkhomp-30N/Sqmm of M/S A.C.C, Fosroc or equivalent mixed with filler like sand in 1:1, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed. note: Weight of grout used in the work will be measured for payment. However, the rate quoted shall inclusive of all materials.
1
-
-
Filling in bath, W/C, toilet, depressed areas with water proofing brick bat coba of the agency approved by the Dept. at all floors and locations upto the required level and making the surface finished suitable to receive floor finish etc. all complete as per drawings and water proofing agency's specifications & as directed by the Engineer in charge.
5
-
-
IVX: WATER SUPPLY
-
-
-
Supplying, laying and fixing CPVC pipes confirming to ASTM D2846, SDR -13.5 at a working pressure of 320 PSI at 23 deg C, complete with all fittings and clamps, Fittings (Conforming to relevant IS/ASTM/BS code), in trenches, floors, walls including embedding if necessary, joining of pipes and fittings shall be done by solvent cement conforming to ASTM F-493, including bends, elbows, tees, reducers, sockets, unions and other specials, supplying and fixing with hooks in wooden plugs or embedding in walls and floors, cutting pipes to required lengths, making connections, cutting chases or holes in walls with machine & making good the same, testing, etc. all complete as per drawings, specifications and directions of Engineer-in-Charge. (CPVC pipes shall meet National Sanitation Foundation
(NSF) requirement for drinking water system)
-
-
-
a) For the following Nominal Bore (NB) pipe: 20 mm
100
-
-
b) For the following Nominal Bore (NB) pipe: 25 mm
110
-
-
c) For the following Nominal Bore (NB) pipe: 40 mm
40
-
-
d) For the following Nominal Bore (NB) pipe: 40 mm
100
-
-
e) For the following Nominal Bore (NB) pipe: 50 mm
150
-
-
Providing and fixing in position heavy pattern screw down Gun metal ball valve with ball SS confirming to IS.778 with hand lever at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specification.
-
-
-
a) 20mm nb for coolers
2
-
-
b) 25 mm n.b.
10
-
-
c) 32 mm n.b.
2
-
-
d) 40 mm n.b.
6
-
-
e) 50 mm n.b.
2
-
-
Providing hoisting and installing at required elevation double layered moulded HDPE cylindrical vertical water storage tank of 10000 liters of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed
10000
-
-
XV. DRAINAGE
-
-
-
Providing & laying UPVC under ground drainage pipes & Fittings of Sudhakar/Nandi/Godavari make for storm water drains& sewerage pipes of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent / welded joints / as per manufacturer's requirement, including encasing the pipe alround using cement concrete 1:3:6 complete to an offeset of D/2 where D= dia of entire pipe length pipe all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc
-
-
-
a) 110 mm DN (SN 8kN/m²-SDR34)
80
-
-
b) 160 mm DN (SN 8kN/m²-SDR34)
140
-
-
Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil / waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1to6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil / waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors etc.
-
-
-
a) 75 mm n.b. pipes
60
-
-
b) 100 mm n.b. pipes
90
-
-
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
-
-
-
a) 450x600mm
4
-
-
b) 600x900mm
10
-
-
Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
a) 450x600mm
8
-
-
b) 600x900mm
20
-
-
Providing uPVC Gully Trap of 150 X 100 mm size with 100 mm outlet with Grating of approved Make, placing at correct position, embedding in cement concrete 1:2:4, 100 mm thick alround complete.
10
-
-
Providing uPVC Floor Trap (Multifloor trap of 110 x 75 x 50 size of Supreme make Cat No. NSPHMTS04L / NSPHMT005L and 3 pc top tile & flush strainer, mat finish of Supreme make Cat No. NSPHTT201L/NSPHTT200L.) / Nahani Trap of following size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC.
20
-
-
Providing and fixing cast iron "P" trap with 100 mm outlet, cadmium plated brass dome grating, necessary 1:2:4 cement concrete for embedding the trap, finishing interor portion of floor opening with cement plaster in CM 1:4 with floating coat of neat cement, etc., complete as directed for Urinals.
3
-
-
Supplying and dry filling of aggregate of granite stone metal/chips including screening, depositing neatly in layers for Septic tank (Reverse filter bed).
-
-
-
a) Stone clips 20 mm down 100 % to be retained on 12.5 sieve
5
-
-
b) Stone clips 12.5 mm down 100 % to be retained on 6.0 sieve
3
-
-
c) Stone clips 6.0 mm down 100 % to be retained on 3.0 sieve
2
-
-
Providing and fixing CI gratings conforming to IS 1729 for filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for filter bed.
75
-
-
Providing and fixing CI cover and frame conforming to IS 1729 for over septic tank etc., including chasing/making holes in existing masonry/concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions painting with two coats of bitumastic paint all in level and line complete as directed and specified.
50
-
-
Supplying and fixing 150 mm n.b. stoneware glazed tees for inlet and outlet of septic tank jointing in CM 1:1 grouting masonry in CM 1:3, closing top with suitable means as shown in drawing etc., complete as directed.
2
-
-
XVI. SANITARY ITEMS :
-
-
-
Providing and fixing EUROPEAN WATER CLOSET, comprising a) European water closet best Indian make, in light colour glazed vitreous, with integral ‘P’ or ‘S’ trap.
b) Plastic low level flushing cistern of gleaming light colour shade, best quality, champion or approved equivalent, conforming to IS:7231 complete with all internal fittings, matching heavy quality PVC flush bend mounted on a pair of white enamel painted CI brackets.
c) 15 mm n.b. heavy quality PVC inlet of heavy quality connection with CP brass unions connected at ends.
d) 15 mm n.b. screw down variety heavy quality C.P. brass stop cock conforming to IS:781.
e) Solid plastic heavy quality seat with lid of approved make and colour with C.P. brass pillar hinges, conforming to IS:2548 (Part I&II).
f) 15 mm n.b. heavy quality CPVC overflow pipe with specials from cistern to 150 mm above floor level painted and terminated with mosquito-proof perforated cap.
-
-
-
a) Vitreous China European Water Closet with P trap of Hindware' make Cat.No.20069 Lara model or equivalent with soft close seat cover "slow falling".
9
-
-
Providing and fixing approved ORRISA PATTERN W.C. SUITE of HINDWARE Brand as per Orissa Pan (Eco) Model ' Cat. No. 20042 (or) CERA Brand Snow white colour Orissa Pan as per ' Cat. No. 2071 (BR) a) Orissa patterns W.C. best Indian make in light coloured glazed vitreous chinaware, 580 mmx400 mm with ‘P’ or ‘S’ trap.
b) PVC low level flushing cistern of 10 lts. Capacity conforming to IS:7231 with all internal PVC fittings mounted on a pair of CI brackets of heavy quality with 32 mm nb PVC bend of required length complete.
c) 32 mm nb PVC flush pipe of appropriate length with all fittings synthetic adhesive cement jointed concealed in wall.
d) 15 mm n.b. heavy quality PVC inlet connection with CP brass unious at ends
e) 15 mm n.b. heavy quality G.I. pipe and specials for overflow from cistern upto 150 mm above floor level concealed in wall and terminated with 15 mm n.b. CP brass mosquito proof jalli etc. complete
f) 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781.
g) 15 mm n.b. heavy quality CPVC overflow pipe with specials from cistern
5
-
-
Providing & fixing vitreous China undercounter/Overcounter Wash hand basin consisting following items of work:- i)Providing vitreous china wash basin conforming to IS 2556 ( part - IV ) and placing the wash basin in position as shown in the drawing or as directed. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin, conforming to IS 775 for Wall hung basin.( For wall hung wash basin) iii) Fixing Vitreous China under / over the counter / semi recessed type Wash Basin and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. ( For under/over counter wash basin ) iv) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin.. v) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge.
vi) C.P. brass waste of standard pattern, 15 mm n.b. screw down heavy quality C.P. bras stopcock conforming to IS: 781., 32 mm CP brass bottle trap, with extension pieceincluding painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed
-
-
-
a) Vitreous China Under counter Wash Hand Basin ''Grande of Hindware" Make Cat. No.91039 'of size 575x430x185 or equivalent.
15
-
-
b) Vitreous China semi pedestal Wall hung Wash Hand Basin, 570x480 mm size of HINDWARE Make Studio model Cat. No:10096 & pedestal 11038 or equivalent.
8
-
-
Providing and fixing as per IS 2556 flat back half stall urinal of size of 328x558 mm size of Hindware/Jaguar or equivalent for supporting the pan on suitable heavy quality CI wall brackets, 32 mm n.b. heavy quality, approved make CP brass bottle trap with extension piece, fixing with CP brass spreader and suitable heavy quality CP brass waste coupling to urinal basin, CP brass grating, spring based flush valve for operation of water flushing etc., complete as specified and directed.
9
-
-
Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
8
-
-
Providing and fixing in position bevelled plain edged mirror 600 x 450mm made out of best Indian glass of 6 mm thick of approved manufacturer, mounted on plywood sheet/ plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed.
16
-
-
Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.
-
-
-
a) Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/Hindware make conforming to IS: 8931 on G.I. lines- size 15 mm.
25
-
-
b) C.P brass 2 Way Bib Cock with wall flange of Jaguar Cat.No. ORM 10041
9
-
-
c) Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-585) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed.
9
-
-
d) C.P brass Bottle Trap, 30 mm dia. with wall flange of Jaquar cat. No. ALD 769.
15
-
-
e) C.P brass single lever basin mixer of 'Jaquar' cat. No. ORM-10011B.
15
-
-
f) CP brass over head Shower 120 mm dia, multi function with cascade effect & wall flange of Jaquar Cat. No. OHS 1779
7
-
-
g) Sink Cock with Extended Swinging Spout (Wall Mounted Model) with Wall Flange Jaguar cat. FLR-5347ND
8
-
-
h) Providing Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges of Jaquar product code FLR-CHR-5273UPR complete as specified and directed
7
-
-
i) Regular Body Concealed Stop cock with protection cap suitable for 15 mm pipe line of Jaquar cat. No. ALD-083 and exposed part kit with fitting sleeve, operating lever & adjustable wall flange with seal of Jaquar cat. No. ORM-10083K.
7
-
-
j) CP brass Shower Arm straight with wall flange of Jaquar Cat. No. SHA 49483.
7
-
-
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.
-
-
-
a) Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553
9
-
-
b) Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531.
8
-
-
c) Stainless steel Towel Rail/Grab bar of Jaquar Cat. No. AHS-1507.
7
-
-
d) CP brass double Coat Hook of Jaguar Cat. No. AKP-35761P.
13
-
-
e) Liquid soap dispenser Jaquar CAN 1135N
10
-
-
f) Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N
7
-
-
g) Towel Ring square with round flange of Jaquar Cat. No. CAN 1121N
15
-
-
XVI. ROAD WORK :
-
-
-
Surface excavation not exceeding 300mm to 450mm deep for road, pavement, building area, formation etc in required camber, profile, excavating using mechanical equipment or any suitable means, filling the ditches with the good available earth, spreading, breaking clods, lumps, watering, dressing, leveling, compacting and consolidating surface with 5 to 8 tonne roller including clearing of all the areas involving excavation and filling of all grass, rank vegetation, shrubs, bushes, cutting of trees upto 300 mm girth measured at 1.0 m above ground level, etc. and disposing the spoils within a distance of 50 m as directed for area levelling/ land grading before start of work for flooring and road work.
915
-
-
Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavatopr/approved means at OMC and compacting with suitable means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work).
230
-
-
Providing and Laying in position RMC of Ultratech, Aparna, Charminar make, of grade M20 or 1:2:4 in-situ mixing by Weigh Batcher using Pozzolona Portland Cement conforming to BIS 1489 of brand M/s. ACC, UltraTech, Raasi, Birla, Coramandal, Andhra Cements Ltd., KCP using river sand and graded stone aggregates of 40mm maximum size including mixing Superplastizer of brand M/s. Fosroc, Demach, Huntsman, Pedilite Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturers Specifications, pumping /lifting, concrete to the required locations, concrete laid to proper camber, profile, level / slope / gradient in panels of convenient size by alternate / staggered panels, placing concrete, consolidation, finishing, applying Two (2) coats of bituminous paint at the contact surfaces of construction joints, forming Expansion Joints of 12mm thick, providing necessary form work, curing, etc., complete as specified and directed for Pavements/road .
135
-
-
Providing, fixing, filling and sealing expansion/construction joints using 12 mm thick bitumastic board manufactured by M/s. STP Ltd., or any other approved equivalent in expansion joints of cement concrete roads including cleaning the surfaces where joints are formed applying one coat bitumastic emulsion cutting the board to the required sizes placing in position filling and sealing the top of the joints with Salitex sealing compound of size 12 x 20 mm deep, using compound manufactured by M/s. STP Ltd., or equivalent including heating, pouring complete etc. in line level as directed.
10
-
-
Supplying and Fixing in position IRC Fabric SI No.4 (100 x 100 x 4mm) conforming to IS 1566 of standard make or its approved equivalent in CC road.
915
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete including two coats of approved primer and two coats of ready mix paint as per IS 164 etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
375
-
-
Electrical Items
-
-
-
Supply and installation of Legrand/Hager/ Havells/ MDS/Siemens make vertical model double door TPN/SPN Distribution boards with minimun IP 43 of following sizes
12 way TPN MCCB DB along with outdoor enclosure with the following components
a. 100 A MCCB with E/F protection - 1 No Incomer
b. 32 A TP MCB - 5 Nos
c. 25 A SP MCB - 16 Nos
d. 10 A SP MCB - 5 Nos
-
-
-
Supply
2
-
-
Installation
2
-
-
4 way TPN MCB DB with following components.
a. 32 A , 100mA FP RCBO - 1 No Incomer
b. 25 A TP MCB - 2 Nos
c. 25 A SP MCB - 4 Nos
d. 10 A SP MCB - 2 Nos
-
-
-
Supply
3
-
-
Installation
3
-
-
12 Way Horizontal SPN MCB DB with following components.
a. 25A, 100mA DP RCBO incomer - 1 No
b. 10A/25A SP MCB - 8Nos
-
-
-
Supply
12
-
-
Installation
12
-
-
Supply and installation of following light fittings of Philips/Wipro/Bajaj make with all accessories like supporting hard ware downrods etc as required to complete the installation in all respects Industrial LED tube light fitting with lumen out put 1800 Lumens similar to Philips TMC 501 with required downrods/ tierods to suspend the fitting from ceiling
-
-
-
Supply
20
-
-
Installation
20
-
-
Industrial LED tube light fitting with lumen out put 3600 Lumens similar to Philips TMC 501 with required downrods/ tierods to suspend the fitting from ceiling
-
-
-
Supply
40
-
-
Installation
40
-
-
Recess mounted LED fittings with lumen output 3000 similar to philips full glow RC380B including required supports (hooks/chain/wire etc) from ceiling to fix the fitting on false ceiling
-
-
-
Supply
205
-
-
Installation
205
-
-
Flood light LED luminaire with pressure die cast housing with minimum IP 65, lumen out put 4250 Lumens similar to Philips Uni flood BVP 150 along with required accessories for fixing.
-
-
-
Supply
56
-
-
Installation
56
-
-
10W circular LED light fitting with CCT 5700K, similar to Philips GreenPerform DN392B
-
-
-
Supply
80
-
-
Installation
80
-
-
Supply and installation of 1400 mm sweep rugged ceiling fan of Usha/Almonard/Bajaj/Orient/Khaitan make of BEE 5 Star energy rated with all accessories like down rod, canopy, ceiling roses, clamps, rubber gasket etc complete
-
-
-
Supply
76
-
-
Installation
76
-
-
Supply and installation of 230V, 300 mm sweep, 1400rpm, ~3250 CuM/hr air delivery, heavy duty industrial exhaust fans of Almonard/Bajaj/CG make with all required hardware, supports, accessories etc complete.
-
-
-
Supply
30
-
-
Installation
30
-
-
Supply and fixing of 4A Lamp holder of legrand/ Havells/Wipro
-
-
-
Supply
50
-
-
Installation
50
-
-
Supply and installation of modular surface mounted PVC switch boards including metal box (with concealing of reqired metal box in the wall), with face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered sockets of Crabtree/ Northwest/ Legrand/ Schneider Electric.
Cost shall exclude PVC pipes and pipe accessories required for this purpose. 1 modular switch board with 16A C rated MCB of legrand/seimens/schneider
-
-
-
Supply
20
-
-
Installation
20
-
-
2 modular switchboard with 2 Nos 6A Switches
-
-
-
Supply
30
-
-
Installation
30
-
-
6 Modular switchboard with 2 Nos 10A sockets and 2 Nos 10A switches
-
-
-
Supply
40
-
-
Installation
40
-
-
8 modular switch board with 5Nos 6A Switches, 1 No Fan regulator, 1No 6A Socket
-
-
-
Supply
10
-
-
Installation
10
-
-
12 modular switchboard with 8 Nos of 6A switches and 4 Nos of fan regulator
-
-
-
Supply
26
-
-
Installation
26
-
-
16 modular switchboard with 16 Nos of 6A switches
-
-
-
Supply
3
-
-
Installation
3
-
-
16 modular switchboard with 10 Nos of 6A switches and 6 Nos Fan Regulators
-
-
-
Supply
2
-
-
Installation
2
-
-
20A Metal Clad Sockets
-
-
-
Supply
14
-
-
Installation
14
-
-
Suypply and pulling of following sizes of flexible FR copper wires of Polycab/Finolex / L&T/ Anchor /GEM make to be drawn in 2mm thick PVC conduit/channels with ferruling on both ends 1.5 Sq.mm FRLS Cu Wire
-
-
-
Supply
10000
-
-
Installation
10000
-
-
2.5 Sq.mm FRLS Cu Wire
-
-
-
Supply
6000
-
-
Installation
6000
-
-
4 Sq.mm FRLS Cu Wire
-
-
-
Supply
1500
-
-
Installation
1500
-
-
Supply and installation of 25 mm dia 2mm thick Sudhakar/AKG make PVC conduits confirming to IS with accessories like bends, couplers etc in roof slab, wall including chasing of wall fixing the conduits and filling the chase with cement mortar and making good of the surface etc complete
-
-
-
Supply
6000
-
-
Installation
6000
-
-
Supply and Laying of following 1.1 KV grade, Alluminium/ Copper Conductor, XLPE insulated, PVC extruded inner sheath, Round wire armored and FRLSH PVC ST2 outer sheathed cables with anti rodent properties as per tender specifications for the following sizes.
Make:Rallison / Universal / Torrent / RPG / CCI / KEI/Polycab 3.5C 70 Sq.mm Al cable
-
-
-
Supply
300
-
-
Installation
300
-
-
4C 6 Sq.mm Cu cable
-
-
-
Supply
500
-
-
Installation
500
-
-
3C 2.5 Sq.mm Cu cable
-
-
-
Supply
500
-
-
Installation
500
-
-
Providing end terminations for following sizes of 1.1 KV grade, XLPE/PVC insulated and PVC sheathed armoured cables including required hardware like weather proof double compression glands, heavy duty long barrel Copper lugs.
Make of glands/ Lugs: Dowells/Jainson/HMI 3.5C 70 Sq.mm Al cable
-
-
-
Supply
8
-
-
Installation
8
-
-
4C 6 Sq.mm Cu cable
-
-
-
Supply
28
-
-
Installation
28
-
-
3C 2.5 Sq.mm Cu cable
-
-
-
Supply
60
-
-
Installation
60
-
-
Supply and fixing of 25 x 3 mm hot dip galvanised GI strip for lightning protection at a height of 5M by clamping on roof sheets/walls/columns with insulators, clamps and all required hardware.
-
-
-
Supply
1000
-
-
Installation
1000
-
-
Supply and installation of maintenance free earthing stations of ASHLOK/ERICO/JEF make with copper bonded steel ground rod with around 20mm dia and 3 Mts long , Ground Enhancing Material (GEM), inter connecting earth tape between earthing stations and back fill material.Construction of masonary chamber of 450 x 450 mm with CI cover, earth station markers etc complete. Pit should be as per IS 3043 Make: Ashlok, Erico, JEF
10
-
-
Supply and installation of 100 mm width, 50mm height with minimum 2mm thickness GI perforated cable trays along with bends and couplers.
-
-
-
Supply
400
-
-
Installation
400
-
-
Suply and installation of structural steel like channels, angles etc for fabriaction and erection of cable trays supports, light fitting supports etc and painting of the same with red oxide and 2 coats of grey enamel paint. Rate should also include the required bolts and nuts for fixing of supports
Make of Structural steel: TATA, Vizag Steel, Jindal Ispat, SAIL
-
-
-
Supply
1000
-
-
Installation
1000
-
-
4 way 2mm thick MS Junction Boxes painted with red oxide and 2 coats of synthetic enamel paint along with 10A connector suitable for terminating 3 Nos 2.5 Sq.mm cable
-
-
-
Supply
10
-
-
Installation
10
-
-
DG Set: 200 KVA, 440V, 50Hz DG Set along with AMF panel as below a. 250 A MCCB with E/F protection - 1 No Incomer
b. 100 A MCCB with E/F protection - 4 Nos
-
-
-
Supply
1
-
-
Installation
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements