National Institute Of Technology Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
National Institute Of Technology - NIT Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date3 Nov 2020
Closing Date1 Dec 2020
Tender AmountRefer Documents
Costs
EMD
₹ 4,38,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_NITT_594571_1Bid Award Id
ViewTender No
NITT/EMD/EE/AMC/CVL/ Tender/2020-21/021Tender Authority
National Institute Of Technology ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender Document for Annual Maintenance on repair and maintenance of Civil works at NIT, Trichy-15.
BOQ Items
... More
Ordinary rock
5
-
-
... More
Hard rock (requiring blasting)
5
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil.
100
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc, not exceeding 80 mm dia.
300
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
100
-
-
... More
Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm
200
-
-
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
... More
Ordinary rock :
-
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia
10
-
-
... More
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
10
-
-
... More
Hard rock (requiring blasting)
-
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia
10
-
-
... More
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
10
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
25
-
-
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
-
-
-
... More
All kinds of soil
500
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
300
-
-
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
1000
-
-
... More
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge.
100
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
5
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
5
-
-
... More
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
20
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
140
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).
3
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
3
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
3
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
20
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
30
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
50
-
-
... More
Shelves (Cast in situ)
50
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
30
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
30
-
-
... More
Stairs, (excluding landings) except spiral-staircases
30
-
-
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
5
-
-
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
-
-
-
... More
50 mm thick
20
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Cold twisted bars
1000
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
10
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Cold twisted bars
50
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
50
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
All works upto plinth level
2
-
-
... More
All works above plinth level upto floor V level
2
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)
-
-
-
... More
All works upto plinth level
2
-
-
... More
All works above plinth level upto floor V level
2
-
-
... More
Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.)
-
-
-
... More
Wall Joint of 100 mm gap
5
-
-
... More
Wall Joint of 150 mm gap
5
-
-
... More
Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221-02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)
-
-
-
... More
Roof Joint of 100 mm gap
5
-
-
... More
Roof Joint of 150 mm gap
5
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
30
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
50
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
100
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
100
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
3
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Area of slab upto 0.50 sqm
15
-
-
... More
Area of slab over 0.50 sqm
15
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
Granite work
100
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Granite Stone of approved shade
10
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
10
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Second class teak wood
2
-
-
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :
-
-
-
... More
Sal wood
1
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
... More
Second class teak wood
-
-
-
... More
35 mm thick shutters
5
-
-
... More
30 mm thick shutters
5
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
-
-
-
... More
Second class teak wood
5
-
-
... More
Particle Board 12 mm thick
-
-
-
... More
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked
2
-
-
... More
Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked
2
-
-
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
-
-
-
... More
Second class teak wood
-
-
-
... More
35 mm thick
5
-
-
... More
30 mm thick
5
-
-
... More
Providing and fixing 25 mm thick shutters for cup board etc. :
-
-
-
... More
Panelled or panelled & glazed shutters :
-
-
-
... More
Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws
5
-
-
... More
Second class teak wood including iSi marked nickel plated bright finished M.S. piano hinges with necessary screws
5
-
-
... More
Glazed shutters :
-
-
-
... More
Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws
5
-
-
... More
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):
-
-
-
... More
12 mm thick
5
-
-
... More
18 mm thick
5
-
-
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
-
-
-
... More
18 mm thick
10
-
-
... More
25 mm thick
20
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
60
-
-
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
30
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
30
-
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
-
-
-
... More
Rectangular or square
30
-
-
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
30
-
-
... More
Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete :
-
-
-
... More
12 mm thick
20
-
-
... More
18 mm thick
20
-
-
... More
25 mm thick
20
-
-
... More
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :
-
-
-
... More
Decorative veneer facings of approved manufacture
30
-
-
... More
Providing and fixing teak wood lipping of size 25x3 mm in pelmet.
60
-
-
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :
-
-
-
... More
20 mm dia
50
-
-
... More
25 mm dia
200
-
-
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
... More
20 mm dia (heavy type)
10
-
-
... More
25 mm dia (heavy type)
10
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc.
300
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
20
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
50
-
-
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
50
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
100
-
-
... More
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
-
-
-
... More
Size 50 mm
5
-
-
... More
Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.
500
-
-
... More
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
... More
125x75x4 mm
125
-
-
... More
125x63x4 mm
10
-
-
... More
100x75x4 mm
10
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
150
-
-
... More
250x16 mm
500
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
300x10 mm
20
-
-
... More
250x10 mm
300
-
-
... More
200x10 mm
300
-
-
... More
150x10 mm
300
-
-
... More
100x10 mm
300
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
1500
-
-
... More
100 mm
200
-
-
... More
75 mm
100
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Single rubber stopper
2000
-
-
... More
Twin rubber stopper
10
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
25
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
50
-
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
-
-
-
... More
Triple strip vertical type
10
-
-
... More
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
200
-
-
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
-
-
-
... More
30 mm thick plain PVC door shutters
200
-
-
... More
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
10
-
-
... More
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
-
-
-
... More
With decorative veneering on one side and commercial veneering on other side
10
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
100
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angles 40x40x6 mm for diagonal braces
15
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover
10
-
-
... More
Providing and fixing ball bearing for rolling shutters.
20
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
1500
-
-
... More
Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
10
-
-
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
50
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
1000
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
50
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
300
-
-
... More
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks:
-
-
-
... More
1:6 (1cement : 6 coarse sand)
200
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
1500
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
100
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
250
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
100
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm
200
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Size of Tile 600x600 mm
20
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of Tile 600x600 mm
100
-
-
... More
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat:
-
-
-
... More
With common burnt clay F.P.S.(non modular) brick tile of class designation 10
200
-
-
... More
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.
200
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
200
-
-
... More
110 mm diameter
200
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
75 mm
50
-
-
... More
110 mm
50
-
-
... More
Single tee with door
-
-
-
... More
75x75x75 mm
20
-
-
... More
110x110x110 mm
20
-
-
... More
Single tee without door
-
-
-
... More
75x75x75 mm
20
-
-
... More
110x110x110 mm
20
-
-
... More
Bend 87.5°
-
-
-
... More
75 mm bend
50
-
-
... More
110 mm bend
50
-
-
... More
Shoe (Plain)
-
-
-
... More
75 mm Shoe
50
-
-
... More
110 mm Shoe
50
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
75 mm
100
-
-
... More
110 mm
300
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
100
-
-
... More
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60
10
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
500
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
30
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
30
-
-
... More
1:6 (1 cement: 6 fine sand)
300
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
100
-
-
... More
20 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
20
-
-
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement : 3 fine sand)
20
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
20
-
-
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Flush/ Ruled pointing
20
-
-
... More
White washing with lime to give an even shade :
-
-
-
... More
New work (three or more coats)
300
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
-
-
-
... More
Two or more coats on new work
1000
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Water thinnable cement primer
500
-
-
... More
Finishing walls with water proofing cement paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.84 kg/10 sqm)
500
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
500
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
... More
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
500
-
-
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
1000
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On concrete work
50
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
1000
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
300
-
-
... More
Painting with aluminium paint of approved brand and manufacture to give an even shade .
-
-
-
... More
Two or more coats on new work
50
-
-
... More
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
50
-
-
... More
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
Two or more coats on new work
50
-
-
... More
French spirit polishing :
-
-
-
... More
Two or more coats on new works including a coat of wood filler
200
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand)
500
-
-
... More
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
-
-
-
... More
Door chowkhats
10
-
-
... More
Window chowkhats
10
-
-
... More
Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.
30
-
-
... More
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge.
-
-
-
... More
For door/ window/ clerestory window
10
-
-
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
-
-
-
... More
Float glass panes of thickness 4 mm
300
-
-
... More
Renewing glass panes, with wooden fillets wherever necessary:
-
-
-
... More
Float glass panes of thickness 4 mm
300
-
-
... More
Renewing glass panes and refixing existing wooden fillets:
-
-
-
... More
Float glass panes of thickness 4 mm
30
-
-
... More
Float glass panes of thickness 5.5 mm
30
-
-
... More
Renewal of old putty of glass panes (length)
30
-
-
... More
Refixing old glass panes with putty and nails
30
-
-
... More
Fixing old glass panes with wooden fillets (excluding cost of fillets)
30
-
-
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.
100
-
-
... More
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :
-
-
-
... More
With F.P.S. brick tiles
10
-
-
... More
White washing with lime to give an even shade :
-
-
-
... More
Old work (two or more coats)
3000
-
-
... More
Old work (one or more coats)
1000
-
-
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
2500
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
100
-
-
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
... More
One or more coats on old work
3100
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
One or more coats on old work
1000
-
-
... More
French spirit polishing :
-
-
-
... More
One or more coats on old work
300
-
-
... More
Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.
-
-
-
... More
One or more coats on old work
3000
-
-
... More
Finishing walls with water proofing cement paint of required shade :
-
-
-
... More
Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
1000
-
-
... More
Old work (one or more coats @ 2.20 kg/10 sqm) complete.
2000
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
... More
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
1500
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade
-
-
-
... More
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
1000
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
1000
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
20
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
10
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
30
-
-
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
... More
In cement mortar
10
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
300
-
-
... More
Of area beyond 3 sq. metres
100
-
-
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
50
-
-
... More
Of area beyond 3 sq. metres
50
-
-
... More
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
-
-
-
... More
Of sectional area 40 square centimetres and above
2
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
100
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
... More
For thickness of tiles 10 mm to 25 mm
500
-
-
... More
For thickness of tiles above 25 mm and up to 40 mm
100
-
-
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
300
-
-
... More
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
200
-
-
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
... More
Asbestos sheet
250
-
-
... More
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :
-
-
-
... More
Thickness above 10 mm up to 25 mm
100
-
-
... More
Thickness above 25 mm up to 40 mm
150
-
-
... More
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead :
-
-
-
... More
Thickness up to 40 mm
120
-
-
... More
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
200
-
-
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
-
-
-
... More
75 to 80 mm dia pipe
500
-
-
... More
100 mm dia pipe
500
-
-
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
... More
15 mm to 40 mm nominal bore
300
-
-
... More
Above 40 mm nominal bore
700
-
-
... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
-
-
-
... More
Up to 150 mm diameter
100
-
-
... More
Above 150 mm dia up to 300 mm dia
100
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
100
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1500
-
-
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
500
-
-
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
300
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
10
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
10
-
-
... More
Supplying and stacking at site.
-
-
-
... More
Red bajri
10
-
-
... More
Good earth
100
-
-
... More
Moorum
10
-
-
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
50
-
-
... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
... More
bituminous portion
10
-
-
... More
Water bound macadam
10
-
-
... More
Supplying at site :
-
-
-
... More
R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in- charge (cost of earth works in excavation, concrete works in foundation to be paid separately).
3
-
-
... More
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.
-
-
-
... More
With G.I. barbed wire
2000
-
-
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.
-
-
-
... More
With G.I. barbed wire
2000
-
-
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
200
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
700
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
6
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
-
-
-
... More
Made of G.I. wire of dia 4 mm
300
-
-
... More
Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade
150
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
100
-
-
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
500
-
-
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
2200
-
-
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer- in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
2200
-
-
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)
500
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
40
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
40
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
... More
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
50
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
30
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
5
-
-
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
510x1040 mm bowl depth 250 mm
10
-
-
... More
Kitchen sink without drain board
-
-
-
... More
610x510 mm bowl depth 200 mm
10
-
-
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
-
-
-
... More
Size 600x450x200 mm
10
-
-
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) :
-
-
-
... More
Long pattern W.C. pan of size 580 mm
10
-
-
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
10
-
-
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
... More
10 litre capacity - White
60
-
-
... More
10 litre capacity - coloured
10
-
-
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
-
-
-
... More
White solid plastic seat with lid
200
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
10
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
32 mm dia
400
-
-
... More
40 mm dia
100
-
-
... More
Flexible pipe
-
-
-
... More
32 mm dia
200
-
-
... More
40 mm dia
200
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
300
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
... More
Rectangular shape 453x357 mm
10
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
10
-
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
-
-
-
... More
Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
10
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
10
-
-
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
10
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
400
-
-
... More
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
100
-
-
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
100
-
-
... More
Providing and fixing PTMT urinal cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
100
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL
-
-
-
... More
15 mm nominal outer dia Pipes
20
-
-
... More
20 mm nominal outer dia Pipes
200
-
-
... More
25 mm nominal outer dia Pipes
200
-
-
... More
32 mm nominal outer dia Pipes
200
-
-
... More
40 mm nominal outer dia Pipes
200
-
-
... More
50 mm nominal outer dia Pipes
100
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal outer dia Pipes
20
-
-
... More
20 mm nominal outer dia Pipes
200
-
-
... More
25 mm nominal outer dia Pipes
200
-
-
... More
32 mm nominal outer dia Pipes
200
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
-
-
-
... More
20 mm nominal outer dia Pipes
20
-
-
... More
25 mm nominal outer dia Pipes
200
-
-
... More
32 mm nominal outer dia Pipes
200
-
-
... More
40 mm nominal outer dia Pipes
200
-
-
... More
50 mm nominal outer dia Pipes
200
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
INTERNAL WORK - EXPOSED ON WALL
-
-
-
... More
20 mm dia nominal bore
20
-
-
... More
25 mm dia nominal bore
50
-
-
... More
EXTERNAL WORK- EXPOSED ON WALL
-
-
-
... More
20 mm dia nominal bore
30
-
-
... More
25 mm dia nominal bore
30
-
-
... More
32 mm dia nominal bore
30
-
-
... More
40 mm dia nominal bore
30
-
-
... More
50 mm dia nominal bore
30
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
30
-
-
... More
50 to 80 mm nominal bore
30
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
15 mm nominal bore
20
-
-
... More
20 mm nominal bore
20
-
-
... More
25 mm nominal bore
20
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :
-
-
-
... More
25 mm nominal bore
-
-
-
... More
Horizontal
10
-
-
... More
32 mm nominal bore
-
-
-
... More
Horizontal
10
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
30 cm length
-
-
-
... More
15 mm nominal bore
50
-
-
... More
20 mm nominal bore
20
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
20 mm nominal bore
10
-
-
... More
25 mm nominal bore
10
-
-
... More
32 mm nominal bore
10
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
10
-
-
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
-
-
-
... More
20 mm nominal bore
10
-
-
... More
25 mm nominal bore
10
-
-
... More
32 mm nominal bore
10
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
10
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
Circular tank
30000
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
30
-
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
30
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
15 mm nominal bore
30
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
30
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15mm nominal bore
30
-
-
... More
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
... More
15mm nominal bore, 86 mm long, weighing not less than 88 gms
200
-
-
... More
15 mm nominal bore, 122mm long, weighing not less than 99 gms
500
-
-
... More
15 mm nominal bore, 165 mm long, weighing not less than 110 gms
500
-
-
... More
Providing and fixing PTMT stop cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 86 mm long, weighing not less than 88 gms
500
-
-
... More
Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms
100
-
-
... More
Providing and fixing PTMT pillar cock of approved quality and colour
-
-
-
... More
15 mm nominal bore, 107 mm long, weighing not less than 110 gms
50
-
-
... More
15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
200
-
-
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
Circular type
-
-
-
... More
100 mm nominal dia
500
-
-
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
-
-
-
... More
15 mm nominal bore, 105 mm long, weighing not less than 138 gms
50
-
-
... More
20 mm nominal bore, 120 mm long, weighing not less than 198 gms
200
-
-
... More
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms
200
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
50
-
-
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.
-
-
-
... More
15 mm nominal bore with 30cm length
100
-
-
... More
15 mm nominal bore with 45 cm length
100
-
-
... More
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
-
-
-
... More
15 mm nominal bore, weighing not less than 32 gms
30
-
-
... More
20 mm nominal bore, weighing not less than 40 gms
30
-
-
... More
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
20
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
100x100 mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
-
... More
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :
-
-
-
... More
150 mm diameter
20
-
-
... More
250 mm diameter
20
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
250 mm dia. R.C.C. pipe
20
-
-
... More
300 mm dia. R.C.C. pipe
20
-
-
... More
450 mm dia. R.C.C. pipe
30
-
-
... More
600 mm dia. R.C.C. pipe
30
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
... More
Extra for depth for manholes :
-
-
-
... More
Size 90x80 cm
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
... More
L D- 2.5
-
-
-
... More
Rectangular shape 600x450 mm internal dimensions
30
-
-
... More
Extra for depths beyond 60 cm of sand cast iron drop connection complete:
-
-
-
... More
For 100 mm dia sand cast iron drop connection
5
-
-
... More
For 150 mm dia sand cast iron drop connection
5
-
-
... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials, all as per direction of Engineer -in-Charge :
-
-
-
... More
Rectangular manhole 90x80 cm and 45 cm deep
10
-
-
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :
-
-
-
... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5
10
-
-
... More
Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10
10
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
50
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
300
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
50
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
400
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
80
-
-
... More
Pre-laminated particle board with decorative lamination on both sides
80
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 4.0 mm thickness
20
-
-
... More
With float glass panes of 5.50 mm thickness
100
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
10
-
-
... More
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
10
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
50
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
50
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
20
-
-
... More
Chipping the existing concrete flooring and roughening the surface etc complete.
500
-
-
... More
Providing and laying Rectified Glazed ceramic tiles of size 380 mm x 380 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622,Kajaria/NITCO or equivalent make, in all colours and shades, in skirting, riser of steps, laid on cement based high polymer modified quick-set tile adhesive (water based) conforming to IS : 15477, using 10 kg.adhesive per sqm of tile area, in average 6mm thickness instead of 12mm thick cement mortar 1:3 (1cement : 3 coarse sand) bedding in laying of wall tiles.
150
-
-
... More
Providing and laying rectified Anti skid Ceramic floor tiles of size 380x380 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.
30
-
-
... More
Removing and refixing door shutters upto 0.90m x 2.10m size including planing the top and bottom face upto 10mm including fixing with stainless steel screws etc complete as directed by the Engineer-in charge. (cost of new hinges shall be paid seperately wherever required)
100
-
-
... More
providing and fixing of single side polished cuddapah slabs for kitchen platforms over 20mm thick base in CM1:4 (1 cement : 4 sand) with joints treated walls cement mortar mixing with pigment as per the direction of Engineer-in-charge.
For 25mm to 40mm thick
100
-
-
... More
Providing and fixing of 40mm dia Unplasticised PVC pipes including all fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per the direction of Engineer-in-charge.
100
-
-
... More
Providing and fixing of 75mm dia (Finolex or Avonplast-6kg/cm2) unplasticised Rigid PVC soil pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes
200
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC Door TEE (Finolex or equivalent make)
50
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC plain elbow (Finolex or equivalent make)
50
-
-
... More
Providing and fixing of 110 mm dia (Finolex or Avonplast-6kg/cm2) unplasticised Rigid PVC soil pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes
200
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 110 mm dia PVC plain elbow (Finolex or equivalent make)
50
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC Door elbow (Finolex or equivalent make)
50
-
-
... More
Providing and fixing of 32mm dia Unplasticised PVC pipes (Avonplast make) including all fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per the direction of Engineer-in-charge.
200
-
-
... More
Repolishing of old Mosaic floors,Dado,skirting etc., in grey and all colours and finishing the surfaces smooth including filling the joints and voids by matching pigments, chips etc complete all as per standard specifications. Rate including cost of materials, hire and running charges of materials,labours etc compete as directed by the Engineer incharge.
300
-
-
... More
Repairing the existing aluminum doors including replace the damaged aluminum accesories and other fittings etc complete.
75
-
-
... More
Providing and fixing weldmesh shutter with MS angle frame of size 25mm x 25mm x 6mm and MS weld mesh size 4" x 4" with necessary bolts and nuts etc complete.
50
-
-
... More
Supply of unplasticised-PVC moulded fittings/accessories for unplasicised Rigid PVC confirming to IS : 13592 Type A-6 kg/cm2, including jointing with seal ring confirming to IS : 5382, leaving 10mm gap for thermal expansion.
Saddle clamp- (75mm to 25mm)
10
-
-
... More
Providing and fixing ball valve (Zoloto or equivalent) confirming to IS : 1703 of approved quality (screwed end):
25mm dia nominal bore
20
-
-
... More
Providing and fixing PVC cowl to the PVC pipes etc complete as per the direction of Engineer-in-charge.
-
-
-
... More
75 mm Cowl
200
-
-
... More
110 mm Cowl
200
-
-
... More
Cutting holes upto 30x30 cm in walls including making good the same : with F.P.S. bricks.
50
-
-
... More
Repairing the existing MS window shutter including removing the shutter,bending,welding,hinges repair and refixing the same in good condition etc as per the direction of Engineer-in-charge.
75
-
-
... More
Providing and fixing open type cupboards with shelves of overall size 600x600x300mm including fixing to wall with rawl plugs and C.P brass screws using 6/19mm thick both side pre-laminated BWR grade ply wood as per the direction of the Engineer-in-charge and consisting of : a) 19mm thick both side pre-laminated BWR grade ply wood for bottom, sides, top and middle horizontal with necessary adhesive and screws. b) 6mm thick both side pre laminated BWR grade ply wood for backing with necessary adhesive and screws c) 2mm thick PVC edge moulding for the exposed face of the prelaminated BWR grade ply wood using necessary adhesive and machine pressing.
10
-
-
... More
Providing and fixing S.S.pipe curtain rods with SS brackets : 25mm dia (heavy type)
100
-
-
... More
Providing and fixing powder coated aluminum curtain rod with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality as directed by Engineer-in-charge.
100
-
-
... More
Providing & Fixing double side Cuddappa slab to shelves etc complete.
25 mm thick
10
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC single door 'Y' (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 75 mm dia PVC double door 'Y' (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 110 mm dia PVC single door 'Y' (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 110 mm dia PVC double door 'Y' (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 90 mm to 75mm dia PVC reducer (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 125 mm to 100 mm dia PVC reducer (Finolex or equivalent make)
20
-
-
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC pipes conforming to IS :13592 Type A including jointing with seal ring conforming to S :5382 leaving 10mm gap for thermal expansion. (i) 110 mm door 'L' (Finolex or equivalent make)
30
-
-
... More
Providing and fixing of 18mm thick non decorative plywood (water proof) resting on the walls etc complete.
20
-
-
... More
Supply of unplasticised-PVC moulded fittings/accessories for unplasicised Rigid PVC confirming to IS : 13592 Type A-6 kg/cm2, including jointing with seal ring confirming to IS : 5382, leaving 10mm gap for thermal expansion.
Saddle clamp- (40mm to 32mm)
10
-
-
... More
Providing & Fixing of Cuddapah slab sink of size 600mm x 450mm etc complete.
20
-
-
... More
Providing and fixing MS Heel to existing window including removal of old damaged existing heel with necessary grinding & welding as per the direction of Engineer-in-charge.
30
-
-
... More
Providing and fixing MS handle to existing window with necessary grinding & welding as per the direction of Engineer-in-charge.
50
-
-
... More
Providing and fixing MS Stay rod to existing window with necessary grinding & welding as per the direction of Engineer-in-charge.
50
-
-
... More
Repairing the PVC sliding door shutter including removing and refixing in good condition with necessary aluminum sliding channels etc complete.
10
-
-
... More
Providing & Fixing ornamental 3 way bib cock etc complete.
10
-
-
... More
Providing and fixing PTMT Health facuet with three way tap etc complete.
50
-
-
... More
Providing and fixing plywood cupboard shutter with piano hinges etc complete.
18mm thick
20
-
-
... More
Providing and Fixing wooden moulded beeding of size 25mm x 12mm etc complete.
50
-
-
... More
Suplying and fixing sun control film for glazed windows,door,Aluminum partition & ventilator shutter including the cost of all materials and labour charges etc.
30
-
-
... More
Arresting leakage through RCC Construction joints The scope of work includes routing out the horizontal cracks along/construction joints to expose the RCC joint and applying CERA SEAL/TEC POLYSEAL G/Sika Crack Seal /NACC poly seal gun grade polysulphide sealant/Dr.FIXIT PU SEALANT.The scope also includes application of CERAFLEX/TEC WAVE 3000/Sika Rain gard/NACC Roof COATING /DR.FIXIT NEW COAT single component flexible membrane with intermediate layer of cloth over the exposed are after allowing the PS(POLYSULPHIDE SEALENT) TO CURE FOR 72 HOURS, All as per manufactures recommendations/standard specifications and instructions of Engineer-in-charge.Rate quoted includes cost of all materials,labour charges,conveyance,tools and all other incidental charges etc complete.
50
-
-
... More
Dismantling the existing chainlink fencing and disposal of 2 km radiusaround as per the direction of Engineer-in-charge including lead charges etc complete.
50
-
-
... More
Labour charges for fixing Aluminum partition as per site condition including fixtures,rubber beeding and resizing the novopan & glass shutters if required etc complete as per the direction of Engineer-in-charge
150
-
-
... More
Providing & fixing 4" Hanjee hook etc complete.
50
-
-
... More
Repairing the existing windows for easy operation i.e. opening & closing etc. rate oncluding cost of labour, scaffolding charges & plaining etc complete.
300
-
-
... More
Providing & fixing circular PVC floor trap to pvc pipe etc complete.
70
-
-
... More
Attending to leak at roof slab and wall joint. The scope of work includes clearing the tiles terrace surfaces to be free of dust, loose particles, algae growth and atmospheric deposits, filling small blow holes if any with CERAFIL 45/TEC TILE 12/Sika Grout/NACC Tile Grout/Dr.Fixit Crack-x and providing primer and top coat of CERAFLEX/TEC WAVE 3000/Sika raingard/NACC High Flex single component/Dr.Fixit new coat highly flexible membrane coating including curing adequately. All as per manufactures recommendation/standard specifications and instructions of Engineer-in-charge. rate quoted includes cost of all materials, labour charges, conveyance, tools and all other incidential charges etc complete for in accessible areas. one primer and two top coats.
100
-
-
... More
Providing one coat of CERALASTIC/TECH WAVE 2000/Sika raingard/NACC roof coating/Dr.FIXIT PDIDFIN 2K water proofing membrane coating followed by one bond coat of CERA BOND SBR /TEC BOND SBR/Sika latex/NACC latex/Dr.Fixit Pidicrete urp sbr latex over the membrane coating and providing cement plastering 6mm thick in CM LATEX over the membrane coating and providing cement plastering 6mm thick in CM 1:4 admixed with general purpose water proofing compound of respective products and curing adequately.All as per manufacturers recommendation/standard specifications and instructions of Engineer-in-charge.The scope of work includes dismantling the existing damaged weathering course and tiles to expose to the RCC slab and finishing to match with the existing weathering course. Rate quoted includes cost of all materials except cement which will be issued free of cost at BHEL stores, labour charges, conveyance, tools and all other incidental charges etc complete. Replacing the damaged tiles and repointing where ever required which will be paid under separate item for accessible areas. (cement consumption = 2.74 kg/sqm)
50
-
-
... More
Attending Crack filling at parapet level with out pressure grouting. The scope of work includes routing the cracks with a mechanically operated groove cutter and sealing the groove with flexible sealant-CERA CRACK FILLER/TEC KRACK FILLER Sika CRACK SEAL/NACC CRACK FILLER/Dr.Fixit Crack-X paste and providing two coats of CERAFLEX/TEC WAVE 3000/Sika RAIN GARD/NACC ROOF COATING/Dr.FIXIT NEW COAT highly flexible membrane for a width of 10cms aligned to the centre of the crack. All as per /manufactures recommendations/standard specifications and instructions of Engineer-in-charge. rate quoted includes coat of all materials , labour charges,conveyance, tools and all other incidential charges etc complete.
300
-
-
... More
Drilling pockets and fixing PVC Nipples in position along weak concrete junctions and leakage points in walls/floor and pressure grouting CERA EXPAN 250/TEC SWELL/Sika INTRA PLAST/NACC EXPAN/Dr.FIXIT PIDICRETE AM 250 expansive grouting additive admixed with cement slurry using hand operated grouting pump. The scope also includes plugging the grout hole with CERA PLUG/TEC STOP/Sika HYDRO PLUG/NACC PLUG/Dr.FIXIT INSTANT LEAK PLUG. All asper manufactures recommendations/standard specifications and instructions of Engineers-in-charge. Rate quoted includes cost of all materials, labour charges, conveyance, tools and all other incidental charges except cement which will be issued free of cost at NITT stores. (CEMENT CONSUMPTION = 0.35KG/POINT)
20
-
-
... More
Providing one coat of Antifungal coating-tec tough/Cera re-played/Sika Multi guard or Sika gard 67/NACC acrylic/Dr.FIXIT DAMPGUARD-protective and decorative coating system as per manufactures recommendations/standard specifications and instructions of Engineer-in-chagre. The scope of work includes surface preparations including cleaing the wall surfaces to be free of previous coatings, dust loose particles, algae growth and atmospheric deposits, filling small blow holes if any with puty,. Rate quoted includes cost of all materials, labour charges, conveyance, tools and all other incidentials charges etc complete.
50
-
-
... More
Providing aluminum Sheet Flashing. The scope of work includes cutting a neat groove along the brick wall and fixing Aluminum sheet flashing of 1' to 1'6" as required including re-filling the grooves and sealing the joints with CERA SEAL / TEC POLYSEAL G /Sika Polysulphide/NACC poly seal gun grade polysulphide sealant/Dr. FIXIT PU SEALANT.All as per Manufacturer's recommendations / standard specifications and instructions of Engineer-in- Charge. Rate quoted includes cost of all materials , labour charges , convey-ance, tools and other incidental charges etc.complete.
30
-
-
... More
Making the opening on Randaon rubble masonry wall by core cutter for laying pipe line etc as per the direction of Engineer-in-charge.
10
-
-
... More
Dismantling the exisiting water closet without damaging the existing sewer line etc complete.
50
-
-
... More
Providing & Fixing PTMT shower rose etc complete.
20
-
-
... More
Providing and fixing of 12" Dia PVC pipe ( 6kg/cm2) etc. Rate including the cost of all materials and labour charges etc.complete.(305 mm)
10
-
-
... More
Providing and fixing of 9" Dia PVC pipe ( 6kg/cm2) etc. Rate including the cost of all materials and labour charges etc.complete.(225 mm)
10
-
-
... More
Providing and fixing brass door stopper etc complete
10
-
-
... More
Providing & Fixing CP brass health facuet with cp brass two way tap etc complete.
10
-
-
... More
Providing & fixing PVC sheet to existing door top surface etc complete.
10
-
-
... More
Providing and fixing 25 mm dia UPVC half turn value to the pipe line etc complete.
10
-
-
... More
Providing and fixing precoated galvanished iron profile sheets (Colour less) (size,shape and pitch of corrugation as approved by engineer-in-charge) 0.43mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of sheet and polyster top coat 15-18 microns.Sheet should be supplied in single length up to 12 metre or as designed by engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
10
-
-
... More
Providing and fixing of 6" Dia PVC pipe ( 6kg/cm2) etc. Rate including the cost of all materials and labour charges etc.complete.
10
-
-
... More
Supply of 20mm water proof plywood etc.Rate including cost of all materials and labour charges etc complete.
10
-
-
... More
Providing & Fixing Aluminum curatain rod of size 1" (25mm). Rate including cost of all materials, taxes and labour charges etc complete.
20
-
-
... More
Providing & Fixing Aluminum end bracket for curtain rod etc complete.
40
-
-
... More
Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications & direction of Engineer-in-Charge. 60mm thick C.C. paver block of M-30 grade with approved colour, design & pattern.
20
-
-
... More
Providing & Fixing PTMT Two in One tap etc complete
20
-
-
... More
Providing and laying debrices for base flooring including consolidating,ramming etc complete as per the direction of Engineer-in-charge.
20
-
-
... More
Providing and fixing oval type wash basin of size 550mm etc complete
10
-
-
... More
Providing & fixing second class teak wood reeper of size 11/2" x 11/2" etc complete.
50
-
-
... More
Providing and laying anti skid coloured chequerred precast cement concrete tiles 22mm thick BETON\EUROCON or equivalent laid over 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joint with white cement & matching pigments etc complete. (for flooring)
20
-
-
... More
Drilling of Core cutting of size 2" dia in Reinforced cement concrete wall and brick work wall up to a distance of 150mm and 230mm respectively etc complete as per the direction of engineer-in-charge.
10
-
-
... More
Drilling of Core cutting of size 2" dia in Reinforced cement concrete wall up to a distance of 375mm etc complete as per the direction of engineer-in-charge.
10
-
-
... More
Attending general carpentry works/faulty works (Minor) to all doors, windows & ventilators etc complete.
1000
-
-
... More
Attending general Masonry and other works/faulty works (Minor) to all locations etc complete.
500
-
-
... More
Attending general Plumbing and other works/faulty works (Minor) to all locations etc complete.
1500
-
-
... More
Providing & Fixing CP brass health facuet etc complete.
10
-
-
... More
Providing & Fixing PTMT health facuet etc complete.
100
-
-
... More
Supply of New PTMT 1” Float and Epoxy coated aluminium rod (Prayag/Leo/ Water Tech)
100
-
-
... More
Supply of New PTMT ¾” Float and Epoxy coated aluminium rod (Prayag/Leo/ Water Tech)
30
-
-
... More
Providing & Laying of 1” pvc line Etc complete.
20
-
-
... More
Attending line burst repair work in water pumping lines (Open and Submerged) including supply of the respective burst line etc, Rate including cost of all materials & labour charges, refilling of the earth, etc complete. (Earth work will be paid extra)
-
-
-
... More
1. ¾” PVC 15 kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
2. 1” PVC 15 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
3. 1 ¼” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
4. 1 ½” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
5. 2” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
6. 2 ½” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
7. 3” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
8. 4” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
9. 6” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
10. 8” PVC 6 Kg Finolex/ astral/ kundan or equivalent
20
-
-
... More
Attending line burst repair work in water pumping lines (Open and Submerged) including supply of the respective burst line etc, Rate including cost of all materials & labour charges, refilling of the earth, etc complete. (Earth work will be paid extra)
-
-
-
... More
1. ¾” GI IS Specs
20
-
-
... More
2. 1” GI IS Specs
20
-
-
... More
3. 1 ¼” GI IS Specs
20
-
-
... More
4. 1 ½” GI IS Specs
20
-
-
... More
5. 2” GI IS Specs
20
-
-
... More
6. 2 ½” GI IS Specs
20
-
-
... More
7. 3” GI IS Specs
20
-
-
... More
8. 4” GI IS Specs
10
-
-
... More
Removing the burst A.C. Pipes from the pipe line and removal of slushy soil and baling out water and replacing the pipe line with sound pipe including jointing and cost of refilling the pipe line with water for retesting the pipe line etc complete (excluding cost of sound pipe and jointing materials and earth work) and as directed by the Engieer-in-Charge
20
-
-
... More
Removing the burst C.I. pipes from the pipe line and removal of slushy soil and baling out water and replacing the pipelinewith sound pipe including jointing and cost of refilling the pipeline with water for retesting the pipe line etc complete. (excluding cost of sound pipe and jointing materials and earth work) and as directed by the Officers. (as per twad rates) For depth upto 2m
-
-
-
... More
1. 80mm dia C.I. Pipes
2
-
-
... More
2. 150mm dia C.I. Pipes
2
-
-
... More
3. 200mm dia C.I. Pipes
2
-
-
... More
4. 300mm dia C.I. Pipes
2
-
-
... More
Supplying and fixing the following gun metal gate valves including removing the existing damaged gate valve etc complete
-
-
-
... More
¾” GM Gate Valve AS PER IS BS 5154 and related IS Specs
10
-
-
... More
1” GM Gate Valve AS PER IS BS 5154 and related IS Specs
10
-
-
... More
1 ¼” GM Gate Valve AS PER IS BS 5154 and related IS Specs
10
-
-
... More
1 ½” GM Gate Valve AS PER IS BS 5154 and related IS Specs
10
-
-
... More
2” GM Gate Valve AS PER IS BS 5154 and related IS Specs
5
-
-
... More
Supplying and fixing the following UPVC/CPVC/PVC valves including removing the existing damaged gate valve etc complete
-
-
-
... More
¾” PVC, CPVC and UPVC Gate valve
30
-
-
... More
1” PVC, CPVC and UPVC Gate valve
30
-
-
... More
1 ¼” PVC, CPVC and UPVC Gate valve
30
-
-
... More
1 ½” PVC, CPVC and UPVC Gate valve
30
-
-
... More
2” PVC, CPVC and UPVC Gate valve
30
-
-
... More
Sluice Valve Check nut & shutter repairing work with materials
-
-
-
... More
(a) 100mm
5
-
-
... More
(b) 200mm
5
-
-
... More
(c) 300mm
5
-
-
... More
Bore well motors rewinding works
2
-
-
... More
Open well motors rewinding works
2
-
-
... More
Supply of 1/2" oil rope and Fixing gland rope for 100 mm sluice valves with bolt nut & washer.
30
-
-
... More
Supply of 3/4" oil rope and Fixing gland rope for 200 mm sluice valves with bolt nut & washer.
30
-
-
... More
Supply of 3/4" oil rope and Fixing gland rope for 300 mm sluice valves with bolt nut & washer.
30
-
-
... More
Sintex Tank shift from one place to other as directed by Engineer- in-charge
30
-
-
... More
Attending repair/burst work including supply of respective following pipes etc. Rate including cost of all materials, labour and other incidental charges etc complete.
-
-
-
... More
(a) 3/4" PVC 15 Kg Finolex/ astral/ kundan or equivalent
30
-
-
... More
(b) 1" PVC 15 Kg Finolex/ astral/ kundan or equivalent
30
-
-
... More
© 1 1/2" PVC 15 Kg Finolex/ astral/ kundan or equivalent
50
-
-
... More
Labour charges for Cleaning the Tank using required quantity of bleaching powder, including removing and refixing the cover slab, cleaning the sides, bottom and top surface of Service tank/ R.C.C Sump/ R.C.C OHT using Pressure Jetting machine etc., complete as per the directions of the department Engineer-in-charge.
-
-
-
... More
1. Water Tank of Capacity ranging up to 5,000 litre
100
-
-
... More
2. Water Tank of Capacity ranging from 7,000 litre - 30,000 litre.
20
-
-
... More
3. Under Ground Sump of Capacity of 1,00,000 litre.
5
-
-
... More
4. Under Ground Sump of Capacity ranging from 4,00,000 litre - 5,00,000 litre
5
-
-
... More
5. Over Head Tank of Capacity ranging from 3,00,000 litre - 4,00,000 litre.
5
-
-
... More
Sodium Hypo chloride 500 kg (More than 100 gm/liter) / per month including the conveyance charges and all other incidental charges etc. complete
1000
-
-
... More
Attending Faults in the CI and GI Air valves
20
-
-
... More
Supply of materials and fixing Bolt and Nut with washer cost including for the sluice valve glands and repair work of valves and all other incidental charges etc. complete
-
-
-
... More
a. 25mm x 100mm
10
-
-
... More
b. 25mm x 75mm
10
-
-
... More
c. 25mm x 50mm
10
-
-
... More
d. 20mm x 100mm
10
-
-
... More
e.20mm x 75mm
10
-
-
... More
f.20mm x 50mm
10
-
-
... More
Supply of Drinking water through motorised water tanker at NIT, Trichirappalli to fill the water at ground level sump and at building over head tank up to a ht of 15 metre.Rate including cost of water,all conveyance,labour and other incidental charges etc complete.
20000
-
-
... More
Replacing the damaged inner set of flushing cistern of the following capacity. Rate including cost of all materials and labour & other incidental charges etc complete.
300
-
-
... More
Replacing the damaged 32mm dia PVC connection pipe from European water closet to Flushing cistern etc. rate including cost of all materials and labour charges etc complete.
250
-
-
... More
Hire charges for JCB including diesel driver beta, etc., Complete as per the direction of Engineer in-charge.
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements