National Institute Of Ocean Technology Tender

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Vertical Blinds: Providing and fixing vertical blinds 100 to 150 mm wide (imported materials) as per manufactures specifications to match the existing colour and quality as per instruction of EIC.,(NIOT standard)The rate inclusive of Providing and fixing of vertical blinds M' track and powder coated aluminium channel, runner, end cap, fixing of brackets, brackets fixed with C.P. brass screws and wooden plugs, transportation, handing and fixing in position. The successful contractor should submit sample to NIOT which will be jointly inspected by NIOT. The colour of the vertical blinds will be decided at the time of supply.all complete as per instruction of Engineer In-charge.

Removing the existing gypsum board false ceiling and fixing of Grid False ceiling Providing and fixing in true horizontal levelfalse ceilingas per the drawing, of approved make, using hot dipped galvanized steel section exposed surface chemically cleaned capping prefinished in baked polyester paint wall angle of size 3000mm x 19mm x 19mm used in the perphery of the ceiling fixed to the wall partition/ RC column band walls with the help of screws at 600mm C/C. Main runner of size 3000 x 15 x 32mm suspended at 1200mm C/C. by using 2mm / 3mm dia GI wire hanger securely fixed to the structural soffit of RC slab by using 6mm anchor fastner at every 1200mm (max) and 1200mm long cross tee of size 15 x 32mm to be interlocked between in main runner at 600mm C/C (max) to form a grid of 600 x 600mm. 600mm long cross tee of size 15 x 32mm fixed in between 1200mm long cross tee for forming a grid of 600 x 600mm. Finally laying 15 mm thk 600 x 600mm Wetformed mineral fiber tile with Factory applied latex paint. Fire rating of 60 minutes as per BS 476/23 of 1987, Noise Reduction Co-efficient (NRC) of 0.55, light Reflectance of 84%, sound attenuation of 34db, Thermal conductivity K-0.052 - 0.057 W/MOK, weight of 3.53Kg/Sqm and Humidity Resistance of RH - 99%. Note: The false ceiling area will be measured in flat area only.

Brick work with common burnt clay F.P.S (non modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement:4 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix : 1:4(1 cement:4 fine sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1:2 (1 cement : 1 coarse sand(zone-III) : 2 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length hold fast lugs or dash fastener Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) Second class teak wood, 35 mm thick shutters

Providing and fixing anodized aluminum work for doors, windows, ventilators and Partitions with extruded build up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodized transparent or dyed to required shade according to IS:1868. (Miniumum anodic coating of grade AC 15), fixed with raw plugs and screws or with fixing clips, or with expansion hold fasterners including necessary filling up of gapes at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechnically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. Brass/Stainless steel screws, all complete as per architectural drawings and the direction of Engineer-in-charge. (Note: The rate Full ht partition including of panelling & Glazing etc (thickness of glass 10 to 12mm) complete as per instruction of Engineer In-charge). Existing Full ht aluminium glazing partition available at site. Before quoting the rate, contractor should visit the site condition. Approved makes: Aluminium - Jindal, Indal. Mirror- Saintgobian. Locks-Godrej (or) equivalent. Polish-Sheenlac, Ramsem.

Providing and fixing of ISI Marked Anodized SS 6" Hinges, size 150 mm x 64 mm x 1.90 mm, conforming to IS : 12817 with stainless steel screws, all complete as per instruction of Engineer in Charge

Supplying and Fixing of SS Door Stopper, with necessary hardware fittings, etc. all complete as per instruction of Engineer in Charge

Supplying and fixing of Heavy duty Door closer with necessary screws and hardware fittings etc all complete as per the instruction of Engineer In- charge. Make: Dyna,Doorma

Supplying and fixing of Classic cylindrical lock with necessary hardware fittings,etc.all complete as per instruction of Engineer in charge Model: stainless steel Make: godrej

Removing existing damaged drawer lock and Supplying and fixing of Drawer lock with necessary arrangement etc complete as per instruction of Engineer In-charge.

Removal of existing and laying of new Polyvinyl flooring tiles or sheets of minimum 2mm thick with necessary bonding components etc (Colour and shade will be approved by Engineer In-Charge) all complete as per instruction of EIC MAKE : Polyvinyl flooring-Armstrong/LG

Providing and fixing of over head storage unit in size of 4500(L)x450(B)x600(H) mm the rear bottom, top and sides are using 19mm thick BWR ply front faces are fixing 19 mm thick BWR ply and finishing 1.0 mm thick laminate top,bottom.all sides,inner sides and back side with necessary lippings, fittings, of lock, handles and BWR ply finished with one coat of wood preservative paint. The intermideate partitions are 600 mm to 900 mm c/c over head storage fixing to wall using MS Heavy duty L clamp every 900 mm c/c etc all complete as per the instruction of Engineer in charge. model available in campus before quoting the rate contractor should visit the site.(Elevation area will be consider for payment)

Supplying and fixing of Cuddappa slab (1'' thick) for wall mounted cup board cost including all necessary grooving good wall for fixing the slab and plastering with neat finish in cm 1:4 and full nosing as per instruction of Engineer In charge.

Supplying and fixing of PVC full ht cupboard and shutters (using solid panels)fixing with approved Make (sintex/reno) and necessary Godrej lock,handles,ss hinges,tower bolts etc complete as per instruction of EIC (Measurements are take only elevation area also cost inclusive of fixing the door on the wall labours and transportation etc.)

Removing the existing damaged Gypsum board false ceiling and providing and fixing new Gypsum board false ceiling consisting of frame work made with 50mm square M.S tubes of 18 mm thickness as main runner at 600mm clear bothways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab including providing and fixing expanded metal of size 5.25mmx1.25mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete.Gypsum board tie up with wire in the existing wall, bottom of the gypsum board provide the necessary angel in all surrounding the existing the wall cost is included 12.50 mm thick and the rate including one coat putty,one coat primer,two coat of emulsion paint etc.all complete as per instruction of Engineer in charge.

Cornice Providing and fixing cornice of 150mm with necessary hardware fittings such as edge screws and painting in cornice and joints also all complete as per instructions of Engineer In-charge Note: Existing cornice model avaialbe at site before quoting the price contractor must visit the site.

Clear glass for table Providing and fixing of Table top clear glass of 12mm thick with edges have to be flat polished and possibly beveled and neat finish all complete as per instruction of Engineer In-charge. Note:The edges of the glass would normally be polished to smooth them out and avoid the possibility of injury from the sharp edges.

Supply and fixing of Teak wood sofa set (3seater sofa 1no and 2nos of single seater sofa). The wooden protion must be scrapping the surface with sand paper and applying two coat of french spirit polish and duly malamine polished. The sofa seat and Base 6" high density foam for back and bottom finished with approved fabric with necessary accessories (fabric cost not less than Rs.250/- per sqm) all complete as per instruction of Engineer In-charge. Model of teak wooden portion and colour of fabric should be approved by EIC. The rate should be inclusive of Transportation charges delivered at site. Before quoting the price contractor must visit the NIOT campus.

Supply and fixing Wooden center table size of table 3'0''(L)x2'0''(B)x18''(H) of teakwood legs. The wooden protion must be scrapping the surface with sand paper and applying two coat of french spirit polish and duly malamine polished. The rate should be inclusive of Transportation charges delivered at site. Before quoting the price contractor must visit the NIOT campus.