National Institute Of Ocean Technology Tender

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats etc,all complete as per instruction of Engineer in charge.Note:Royale Luxury emulsion or equivalent and Colour and shade will be approved by Engineer In-Charge. Make:Asian,Berger,Nerolac Location: 1).Main building / 1st floor / S&P / Room no : 226,227,228 & 236A = 264.00 sqm.2).Main building / Ground floor / S&P Store room / Room no 107 = 40.00sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work Make:Asian,Berger,Nerolac. Location: Main building / 1st floor / S&P / Room no : 226,227,228 & 236A.

Removing existing damaged laminate and Providing and fixing of New 1mm thick laminate sheet with necessary arrangements (adhesive to be fevical&S.R.paste only)etc all complete as instruction of Engineer in charge.Note:Colour of laminate should be approved by Engineer in charge.Wastage is not considered for payment.Before quoting the price contractor must inspect the site condition. Make:Sunmica,Merino,Green,Century,Greenlam. Location: 1)Main building / 1st floor / S&P / Room no : 236A = 2.20sqm.Location: Main building / Ground floor / S&P Store room / Room no 107 = 12.60 sqm.

Removing the existing vinyl floor tiles and providing and laying of New Polyvinyl flooring tiles of 1.5mm thick of approved shade and size necessary bonding components etc (Colour and shade will be approved by Engineer In-Charge) all complete as per direction of Engineer - in- charge.Note:Dismantling Pvc tile work in floors laid with binding material /adhesive including stacking material within 50 metres lead etc, all complete etc as per instruction Engineer in charge MAKE : Armstrong, LG, Hi Luck, Solarbrite, Gokulux Location: Main building / 1st floor / S&P / Room no : 226,227,228

Removing the existing Gypsum false ceiling and providing and fixing new Gypsum board false ceiling consisting of frame work made with 50mm square M.S tubes of 18 mm thickness as main runner at 600mm clear bothways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab including providing and fixing expanded metal of size 5.25mmx1.25mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete.Gypsum board tie up with wire in the existing wall, bottom of the gypsum board provide the necessary angel in all surrounding the existing the wall cost is included 12.50 mm thick and the rate including one coat of full putty,one coat primer,two coat of emulsion paint etc.all complete as per instruction of Engineer in charge. Note:Before quoting the rate contractor should visit the site.Location:Main building/ 1st floor / S&P / Room no 228.

Providing and fixing of 4" SS Tower bolt with necessary screws and hardware fittings etc all complete as per instructions of Engineer in-charge.Location: Main building / Ground floor / S&P Store room / Room no 107.

Providing and fixing of Cupboard lock with necessary screws and hardware fittings etc all complete as per instructions of Engineer in-charge.Location: Main building / Ground floor / S&P Store room / Room no107. Make:Godrej

Providing and fixing of 4" Cupboard handle with necessary screws and hardware fittings etc all complete as per instructions of Engineer in-charge.Location: Main building / Ground floor / S&P Store room / Room no 107.

Providing and fixing Additional support existing Ply wood storage unit using 19mm BWR plywood with hardware fittings etc all complete as per instructions of Engineer in-charge.Location: Main building / 1st floor / S&P office room / Room no 228.Plywood Make:Geen ply , Kitply , Archid , Sharon.

TOTAL WITHOUT GST

GST at 18%