National Institute Of Ocean Technology Tender

Excavating all types of soil (manually) up to depth 0.75 metre to 1 metre and width of 100 mm to 300 mm, 100 mm river sand cussioning for cable, laying brick above the sand cussioning and back filling the excavated earth in the trench.

Removing and refixing of Existing panel board (2000mmx300mmx1500mm) with necessary suitable size heavy MS channel support to the height of 750mm from the existing floor level.The channel should be painted with two coats of redoxide primer and over and above with another two coats of black enamel paint.The job includes welding, cutting and allied works such us removing of the existing cable to required height,reglanding,termination with suitable supports if required at site.

Taking out existing CC interlocking paver blocks from footpath/central verge,including removal of rubbish etc., and Re laying old cement concrete interlocking paver blocks of any design/shape laidin required line,level,curvature,colour and pattern over and including 50mm thick compacted bed of coarse sand,filling the joints with fine sand etc., all complete as per the direction of engineet-in-charge.(Old CC paver blocks shall be supplied by the department free of cost) Note : Existing paver block should be removed without breakage.

Supply,laying and end termination of 5Rx35sqmm (3Runs for 3phase & 2Runs for UPS neutral) FRLS PVC insulated copper conductor graded to 1.1kV ,single core multistrand cable with 2" rainforced PVC hose along the Floor/wall as required as per site condition.The job including of providing of suitable copper lugs and PVC gland also. Location : * Incomer panel to 60kVA UPS. * 60kVA UPS to Outgoing panel. Make:polycab/KEI/Kundan/RR/SN cab

Supply,laying and end termination of 2R x 50sqmm FRLS PVC insulated copper conductor graded to 1.1kV ,single core multistrand cable in existing 1¼" size PVC Conduit along the wall as required as per site condition.The job including of providing of suitable copper lugs. Location : * Incomer panel to 60kVA UPS. * 60kVA UPS to Outgoing panel. Make:polycab/KEI/Kundan/RR/SN cab

60kVA UPS Incomer Panel Supply,Erection,Testing and Commissioning of indoor type Panel,wall mounting type,dust and vermin proof,constructed of 14SWG CRCA sheets,compartmentalised,modular type and powder coated as per specification below. Incomer :- 1) 200A 4P 50kA MCCB - 1no 2) Current transformer rated 200/5A,10VA/CI 1.0 meter - 3no's. 3) Digital Multi data Meter with RS485port - 1no. 4) LED type RYB indication lamps with control fuses - 1set. Outgoing :- 1) 125A 4P 36kA MCCB - 3nos. 2) One set 200A TPN 50kA for 1sec copper Bus Bars with colour coded heat shrinkable PVC sleeves,DMC/SMC bus bar supports and suitable earth bus and accessories as required as per the TNEB norms. Note :- 1) All breakers should have shunt release arrangement. 2) All breakers should be with rotary handle mechanism. 3) The size of the outgoing compartment for 125A shall not be less than that for 200A. 4) Each outgoing compartment size shall be designed for accommodating enhanced instrumentation in future. Make:- 1) Panel board - CPRI Fabricators 2) MCCB - L&T / GE / SIEMENS (D-shine model 3) CT - KAPPA / L&T 4) METER - KRYKARD/L&T/schneider/Enercon 5) LED INDICATOR - TEKNIP/L&T/SIEMENS Location: MB/FF/RW/60kVA UPS room(CMC store room).

60kVA UPS Outgoing Panel Supply,Erection,Testing and Commissioning of indoor type Panel,wall mounting type,dust and vermin proof,constructed of 14SWG CRCA sheets,compartmentalised,modular type and powder coated as per specification below. Incomer :- 1) 200A 4P 50kA MCCB - 1no 2) Current transformer rated 200/5A,10VA/CI 1.0 meter - 3no's. 3) Digital Multi data Meter with RS485port - 1no. 4) LED type RYB indication lamps with control fuses - 1set. Outgoing :- 1) 63A 4P 36kA MCCB - 2nos. 2) 40A 4P 36kA MCCB - 2nos. 2) One set 200A TPN 50kA for 1sec copper Bus Bars with colour coded heat shrinkable PVC sleeves,DMC/SMC bus bar supports and suitable earth bus and accessories as required as per the TNEB norms. Note :- 1) All breakers should have shunt release arrangement. 2) All breakers should be with rotary handle mechanism. 3) The size of the outgoing compartment for 63A shall not be less than that for 125A. 4) Each outgoing compartment size shall be designed for accommodating enhanced instrumentation in future. Make:- 1) Panel board - CPRI Fabricators 2) MCCB - L&T / GE / SIEMENS (D-shine model 3) CT - KAPPA / L&T 4) METER -KRYKARD/L&T/schneider/Enercon 5) LED INDICATOR - TEKNIP/L&T/SIEMENS Location: MB/FF/RW/60kVA UPS room(CMC store room).

TOTAL WITHOUT GST

GST at 18%