Municipality Tender

Picking the existing BT surface upto 50mm thick as directed by the Departmental officers and collecting the picked up salvaged metal and stacking the same for reuse and depositing the debris excludung cost of materials including all labour charges for picking and all other tools and plants employed of the work and including all other incidental charges etc.,complete as per standard specifications as per clause 111,112,202, 900 & 305.4.3 of MORTH - Vth Revision etc.,complete.

Prime coat :Providing and applying primer coat with bitumen emulsion (SS-I type) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/Square Metre using mechanical means as per clause 111,112, 501, 502 & 900 of MORTH Vth Revision - over WMM/ WBM

Advance Patch work 13.20mm Providing Advance Patch work using 50mm consolidated Thickness by using 1 m3 of 13.20mm IRC Metal with 44kg of Bitumen per 1 m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric gauge for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70KN power roller for premix carpet and seal coat separately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat separately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications

Plain cement concrete 1:4:8 mix (One cement, four sand and eight aggregate ) using 40mm HBG metal from approved quarry,including cost and conveyance of all materials and labour charges for laying,finishing and curing etc, complete as per the standard specifications.

Raising the existing Manhole to road surface with PCC 1:2:4 Mix using 20mm ISS HBG metal including cost of Former works for centering for inner and outer inculuding cost of Dismantling existing manhole raising, refining and curing charges etc., completed as per standard specifications

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per Square Metre on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 111,112, 501, 503 , 900of MOR TH Vth Revision - over granular surfaces treated with primer

Plastering with cement mortar (1:4) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309).

Wet Mix Macadam (Table 400-13) :Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, as per clause 111,112, 406 & 900 of MORTH Vth Revision etc.,complete.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per Sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC : 35 the finished surface to be level, uniform and free from streaks and holes etc. complete as per MORT & H specification No.803

Earth work excavation for foundation in all soils and sub soils with an initial lead and lift of 10m and bailing out water if necessary etc, complete as per the standard specifications.

Plain cement concrete 1:2:4 mix (One cement, two sand and four aggregate ) using 20mm HBG metal from approved quarry,including cost and conveyance of all materials and labour charges ( excluding cost of centering charges ) for laying,finishing and curing etc, complete as per the standard specifications.

For Side wall & For Deck slab

Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.20 kg per Square Metre on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 111,112 501 & 503 , 900 of MORTH Vth Revision - over bituminous surfaces

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) - Upto Basement