Municipal Administration And Water Supply Department Tender

Manufacturing , supply and fixing of Retro-reflecries road name sign board single arow of size made out of wide angle cub corner micro prismatick grade sheeting conforming to IRC 67- 2010 and type XI of standards of ASTM 4956- 09 specification and fixed over 2mm tk aluminium sheet and back support frame by 32Np stainless steel pipe alround and 65Np pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 Grade cement concrete 30cm x 30cm x 45cm etc., complete. the information message shall be made out of cutout letter in blue colour transparent overlay film as per IRC 67:201 guideluines 7 years pre qualification warranty for Retro-reflective sheeting from the original sheeting manufacture and a certified copy of three years out door exposure report from and independent test lab for the product offered shall be submitted by the contractor. The sign board shall be retro reflective type XI, the retro reflective sheeting should have manufacture ward mark on the sheeting surface for identification and the reflective sheeting should be orientation free.etc, complete.

Refixing Existing Paver Block surface etc

Raising the existing circular manholes in heavy type including removing the existing manhole cover with frame by dismantling the existing cement concrete and tar road surface alround the manhole raising the manhole with cement concrete 1:2:4 (one cement two sand and four aggregates ) 25 cm height including centering inside the manhole raising ,laying 15 cm tk cement concrete 1:2:4 with 20mm granite chips including finishing the top surface of manhole alround etc., complete.,

Providing and fixing Bitumen Pad for Expansion jointin between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveynce of expansion joints including shalimar padand joint sealent etc,complete as per standard specification

Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying 80mm thick high strength type conforming IS 15658-2007 of Rubberised interlocking paver block in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in herring bonepattern with quarry rubbies cushion below the uniform shap of approved non sticking surface in top and the rate is including levelling the base preparation at paver as sub base, quarry rubbies cushion 150mm thick laying out of pavement cut the pies of fix the edge vibrating the pavers, sweeping transporting loading and unloading and laying of paver block as per standard specification etc.,