Municipal Administration And Water Supply Department Tender

Providing and laying of Prime coat using Emulision Bitumen at the rate 7kg Per 10sq.m the VWMM Surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of MORTH Rev-5 specifications

Providing and laying of Prime coat using Emulsion Bitumen at the rate 2.5 kg Per 10sq.m the WMM Surface treated with primer using 2.5 kgs of bituminous Emulsion (RS) for 10 square meter area including cost of bituminous’) binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 503 of MORTH Rev-5 specifications

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 1O0square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH  specifications

Providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 2030 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc.,including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler, tipper trucks, paver finisher, vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 505 of MORTH Rev-5 specifications.

Providing and laying Bituminous concrete to 30/40mm thick using 0.13 cum of 19 00 9 60mm, 0 17 cum of 9 502.36mm and 0.26 cum of 2.36 and below with 46 28 kgs of VG60/ VG70 bitumen,4.00 kg plastic for premixing 10sqm including cost and conveyance of all matenas to CMP site heating the bitumen and aggregate to requ red temperature and mixing them in required temperature m central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to paver site , spreading the mux to uniform thickness of 40mm /30 mm with mechanical paver to the specified grades and cross sections and consolidated by 8010 tonne vibratory/ pneumatic roi to the required density etc., including labvour attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler ,  trucks , paver finisher /9m paver finisher , vibratory pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 607 of MORTH Rev-5